OS BlackBerry 10 blackBerry 10 security and ease of use anywhere

Similar Questions

• Messenger of blackBerry Smartphones BB and fees for use on a trip across the world

  I have a BB Curve and will take a trip to Europe (I am the United States).  I have TMobile, and I continue to receive responses from TMobile about the question to know if I charged for the use of BB Messenger while in Europe.  Are there fees for using BB Messenger or is it a free service offered to all BB phones regardless of the telephone operator?

  Thank you!

  This issue has been several responses depending on how YOU will use the data.

  BlackBerry Messenger uses your unlimited dataplan, while you are in the United States. While you're in your home country, you can use BBM to send and receive messages from all worldwide - free - as long as you have the unlimited data plan.

  If you travel abroad, you will need an international data plan and the BBMessenger would then become a part of this plan, IF you get this plan. Otherwise, (a) you not have data in Europe, or (b) you will be charged for the use of international data without an international data plan, and which will cost a lot of money.

  Thus, the follow-up question is... will you have a data Plan International to TMobile on a trip, or what are you plans?

• an honest, AVCHD compatibility / ease of use - open discussion.

  Hi all!  I have not yet updated CS4 and want to use it with the AVCHD format that I know that CS4 now is now capable of.  But how can I not use the trial to make sure that I'm comfortable going tapeless, I want to know your opinion on this.  Here are a few questions I have (with PC):

  (1) I heard that import AVCHD can end up physically cut due to FAT 32, it is a universal trait first or is it because of the way a camera itself manages the format?  (I'm not referring to start and stop recording on a stage, I'm referring to a single continuous shot of footage being cut because of the file management)

  (2) I also heard that AVCHD is difficult to edit with.  Those of you who have worked with her, did you noticed this and if so how has he returned your productivity?  For example, were you able to successfully and efficiently use a multicamera with three or more AVCHD files without accidents or choppy playback or A / V sync issues?  (assuming that your computer has the minimum recommendations of Adobe)

  (3) can I export an AVCHD project in other formats and sizes report without loss of image quality? (i.e. down the conversion of a 4:3 dv avi file).

  (4) can I work with AVCHD video in a 4:3 DV project?   (I don't know how any of this sounds, but I wonder about the compatibility, capacity and ease of use.)  I never know when I might need this option.

  (5) can I use AVCHD with After Effects?  Can I have an alpha channel in this format?

  (6) are there limitations on the effects with this format (i.e. can I still do move/scale/opacity in real-time or color correction)

  (7) you enjoy the experience of editing AVCHD?

  Thanks for reading and join the discussion!

  Bilateral bow

  The results are here: http://forums.adobe.com/thread/554404

• BlackBerry Smartphones impossible to disable the password security and encryption

  HelloW, I am currently using,
  BlackBerry 9780
  Smartphone (3G, Wi - Fi)
  6.0 bundle 3049 (v6.0.0.706, platform 6.6.0.246)
  Band 3G 1,2,5,6
  The kernel v3.8.6.5 encryption
  Brand version: 1.0.99.538J
  The micro Edition configuration: CLDC-1. 1
  Micro Edition profile: MIDP - 2.1
  Micro Edition JTWI Version: 1.0
  Micro Edition Media Version: 1.1
  Micro Edition PIM Version: 1.0
  Micro Edition file Version: 1.0
  Edition micro Bluetooth Version: 1.1
  Micro Edition location Version: 1.0.1
  Micro Edition Security and Trust Services (APDU) Version: 1.0
  WLAN Version: 4.3.0.9
  (Research In Motion Limited)
  Now the problem is that I'm not able to disable password insecurity,
  (Homescreen > options > Security > password), there is a small latch (yellow lock symbol). Another problem is that I am also able to disable encryption, there is a tick mark on who. And there is one symbol of a padlock, please help me da information thereon, after every 20 minutes my B.B gets locked and I asks me to put the password of da, I want what it b done with the company.
  Thank you.

  Hello and welcome to the community!

  From what you describe, there is a COMPUTER on your BB policy which is demanding both encryption and a password for the device-lock. If you are currently on the BES, then STOP NOW and see your BES admins they control it.

  If you are not on BES, somehow your BB has a COMPUTING policy... the cause maybe it was once associated with BES, but not properly deleted when the property was transferred to you. If all goes well, there will be other problems that often comes with "2nd hand" situations. In any case, you can check this:

  • KB30076 How to check for an it on a BlackBerry smartphone policy

  Even if does not appear as described, from what you have described, there is probably a COMPUTER policy that is causing this (some may be "hidden"). To remove it, first make sure you have a good backup of your BB... See the link in my sig auto on this post for instructions. Then do this:

  • KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

  Thereafter, your BB will be as new... you need to re - install your applications and restore your data (according to the backup you took my instructions above). BUT - when you restore data, DO NOT make a full restore... rather, only restore these databases you need (e.g., Contacts, calendar, Messages, etc.) and more precisely to avoid those who have nothing to do with the COMPUTER policy, company or similar things... If you restore, you will be right where you started.

  Good luck and let us know!

• BlackBerry Smartphones security answer

  I need help, I lost my password for Blackberry App World and I can't reset it because he needs the security answer and I don't remember, so I can't have a different password.

  It must be remembered the BlackBerryID password or secret answer to the question. Without either, you're stuck.
  Your choice is:
  -Use a different e-mail account to create a new BlackBerryID (with which you will lose access to all apps purchased using the 'forgotten' first BlackBerryID, or)
  -Find the initial email you have been sent to confirm the initial BlackBerryID and there are a link to click to cancel and delete the account. Click on this, delete the account and then you can use that same e-mail to create a new account.
  Good luck.

• BlackBerry Bold 9000 Blackberry Smartphones - could not load any software and unable to use the phone

  Hello

  I have a blackberry bold 9000 and has been updated from the last app on this subject yesterday. Due to the low battrey my laptop turns off until the software has been installed to prperly. I tried the following:

  (1) to take the battrey and turn on the phone and tried to load the software again but that doesn't seem to work because the software does not recognize my phone it says unknown device.

  (2) I tried to use the option of updating the Web site, but also, which doesn't seem to work

  The display shows the following message appears when turned on.

  The application's permissions:

  The driving security application tries to access the information from the phone. I can't move the trackball on the appropriate option.

  Not really sure if there is a way to solve this problem.

  Help will be very appreciated. Thanks in advance.

  Concerning

  Ashish

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life.

  Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
  http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
  Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

• BlackBerry Z10 z10 and help link

  Greetings all long time in love BB, recently bought for the new z10 and here are my problems

  1 drivers moved or not is found for phone

  2 download link and uninstalled and reinstalled several times, cleaned of any enttries to register, I get the error message unalbe to sign in blackberry ID make you that im connected to internet disabled both firewall and antivirus stilll no luck, any help would be greatly appreciated

  Solved CONNECTED COMPUTER ADMINISTRATIVE MODE uninstalled, AS LINK AND ALL RELATED to BLACKBERRY AND WENT through REGISTRY AND DELETED ANY REGISTRY ENTRIES RELATED to BLACKBERRY NEW INSTALLER AND BOOM FACT IT ME NO THANKS you Admin

• How to implement by scanning image for Blackberry 5.0 and later version OS devices?

  Hi all
  I need to develop the functionality of drag in an application. To do this, I added five bitmapfield in five different verticalfield Manager and these five verticalfiled have been added in a horizontalfield with the Horizonatal Scroll property manager. And try to implement features of shot using Touch events. Code below works for Blackberry OS 5.0 devices, but its does not work in Blackberry 6.0 and later OS devices.

  protected boolean touchEvent (TouchEvent message)
  {

  try {}
  int x = message.getX (1);
  int y = message.getY (1);

  int eventCode = message.getEvent ();
  if(eventCode == TouchEvent.Down)
  {
  DX = x;
  DY = y;
  }
  Another yew (eventCode is TouchEvent.UP)
  {

  UX = x;
  UY = y;

  disX = Dx - Ux;
  disY = Dy - Uy;

  If (disX > (Display.getWidth () / 3) & this.index)<>
  {

  If (this.index<>
  This.index ++;
  vfmImage [this.index] .setFocus ();
  System.out.println ("disX:" "+ disX +" different: "+ (Display.getWidth () / 3) +" Index: "+ this.index);

  }

  ElseIf (disX < display.getwidth()="" -(display.getwidth()="" +="" display.getwidth()/3)="" &&="" index=""> 0)
  {

  if(this.index>0)
  -This.index;
  vfmImage [this.index] .setFocus ();
  System.out.println ("disX:" + disX + "different:"+(Display.getWidth()-(Display.getWidth() + Display.getWidth () / 3 ")) +" Index: "+ this.index);

  }
  on the other
  {
  if(index==0)
  {
  vfmImage [1] .setFocus ();
  }
  on the other
  {
  vfmImage [this.index - 1] .setFocus ();
  }

  vfmImage [this.index] .setFocus ();

  }

  }

  }
  catch (System.Exception e)
  {
  Dialog.Alert ('catch');
  e.printStackTrace ();
  }
  Return super.touchEvent (message);
  }

  Thank you
  Sylvie

  Hello

  Use this api
  http://www.BlackBerry.com/developers/docs/5.0.0api/NET/rim/device/API/UI/extension/component/picture...

  Kind regards
  pp

• SE connect Blackberry 10 Simulator and BBM works does not in the Simulator

  Hi all

  I use QNX momentics IDE for development and blackberry 10 Simulator.

  I use the simulator using VMWare workstation. A problem that occurs is that my Simulator is impossible to connect to BBM. Although the Internet is there on Simulator (checked with the browser on Simulator). As far as newspapers are concerned in the case of the blackberry simulators 9900 and 9930 counted out newspapers and event logs.

  But in this Blackberry 10 Simulator, I could not find newspapers where they are generated.

  Please tell me the location where in 10 blackberry Simulator logs are generated.

  Thank you best regards &,.

  Tushar

  for newspapers, check out this link

  http://supportforums.BlackBerry.com/T5/native-development-knowledge/debug-on-the-device-with-console...

  Please mark as solution if it helps

• Differences between the version of BlackBerry Device Software and platform. Help, please...

  Hi guys!

  I'm really confused... Help, please!

  We have developed applications for our customers. We tested with our BB8700 and it works fine.

  We used JDE4.2 for development... and we think that it will work on v4.2 based handsets.

  But our customers wrote that it works on v3.7. Why? Is this possible?

  I looked at the information about my 8700 device and then noticed: v4.2.1.107 (platform v2.3.0.84)

  -What are the differences between the version of BlackBerry Device Software and platform?

  Possible customers spoke of version 3.7 of the platform?

  There is a list of the devices, where we can find the version of BlackBerry Device Software by BlackBerry device model?

  Or where we can find information about the models of devices that will support our application?

  Thanks in advance!

  AFAIK there is no version 3.7 platform.

  Customer talking about the OS version.

  So, if they have the device OS version 3.7 you must use JDE JDE 3.6, 3.7 or older.

  Or take updated device OS if the necessary software is available.

• BlackBerry software mixing and Issues resolutions, I've found. (Mix &amp; link does not then BBID connection errors)

  I spent a good amount of time a problem resolved with the latest version of the link & Blend (Setup file: BlackBerryDesktopSoftware_B98.exe) and I wanted to share my findings in case someone else is having similar problems.

  I have already installed 1.2.3.56 link and it worked fine with my Q10, I used it for access to remote files, sync and backup and everything worked perfectly.  BBID was able to manage a disconnect, connect to the application without problem.  When the passport was released I had planned to make one, so I tried to upgrade to the latest version of link being bundled with the installer of mixture.  That's where all my problems started...

  After numerous installs / uninstalls the best I could muster with the new version was a mixture executable that would end itself quietly (no paper anywhere) in the second run.  Only way to really see in taskmanager was to select in the browser and press the Enter key (this he launched hundreds of times, I was doing this while using the process monitor to see if a log file has been generated anywhere, I didn't expect that it remains running) in addition the link sat at its screen for a LONG time , and when he finally start step 2/3 has never worked.  This is the step where you enter your credentials BBID and it records the link your account BBID, whenever I came to this page, that he had a yellow triangle and a button 'Retry' which obviously did not help much.

  The link always took to connect is because PeerManager.exe had the same problem that Blend.exe did, he would go for<1 second="" and="" then="" terminate="" quietly="" on="" it's="" own="" with="" no="" logs="" of="" any="" kind. ="" when="" link="" is="" started="" and="" running="" you="" should="" see="" the="" peermanager.exe="" process="" running="" in="" your="" task="" manager,="" and="" of="" course="" it="" woudn't="" stay="" running="" for="">

  I had the debuggers and IDA to take a look at what was going on and what I found I hope it will help someone without having to make all the steps of this.  For what it's worth I've also call in support BlackBerry when I get my passport and to inform them of the issue, I came across.

  The short end of history / TLDR. I had to do 2 things to get this version of Blend / link not working for me: create a white 'openssl.cnf' file on my hard drive and point to it with the environment variable "OPENSSL_CONF".  Second question was about a value in "HKEY_CURRENT_USER\Software\Research In Motion" that he did not, I removed this entire key during a re - install, and now the BBID authentication page correctly.

  I'll add some additional notes on what I found in the next post...

  If someone is curious about what I found while debugging, this is what lead me to the library & it is OpenSSL configuration problem...

  While I was debugging, I changed a routine jump and was able to get executables to start.  The PeerManager.exe and the necessary mixture changes the code runs successfully. (suspicious code block was in the mix file libeay32.dll PeerManager.exe with link/Blend)

  Looking at these two very similar code blocks shown a string of text before the jump to 'leave' called, showing that the code path that displays the text string "Automatic Configuration failed." called when an error occurred.  Interestingly enough it is then the functions available are currently walked initterm (an internal function in MSVCRT100.dll) and if the executable is never a chance to sign anything before this happens.

  Seeing that I had a similar error message in both applications indicated that it was a common library that has been compiled with both applications.  So I went to google to find pages associated with this error message...  Looks like this is a common problem with libraries and compiling of data, but I was focused on how to work around the problem and I finally tried one of the hotfixes sugguested I found.   Here's an old bug report on OpenSSL which indicates it might be a problem with the availability of openssl.cnf and is:

  https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=584911

  With the above information, I went to my system properties and set a System Variable, named "OPENSSL_CONF" and a value of "C:\openssl.cnf".  I then went to a dos prompt and make an empty file to this location using "COPY CON C:\openssl.cnf" (on the first line, I just recorded it with CTRL + Z) I then restored the binary no patches and low and behold, they worked very well!  Blend.exe started well to the top and Peermanager.exe were also still works just fine.  I couldn't BBID authentication window to come yet, but applications take at least now on my device and they actually open and created newspapers.

  MIX OF NOTES:

  Work with mixture problems not starting not leads believe me it is a problem compiling.  If I replace the OpenSSL library, it comes with (libeay32.dll and ssleay32.dll), with their installation package 1.0.1i binaries 'lite', Blend.exe starts fine.  Peermanager.exe can be fixed as well as libraries are statically compiled in this application.  Libraries have been restored for versions supplied with mixture once the environment variable has been confirmed for the problem.

  Auth BBID question:

  It was relatively easy to solve compared to the above question... Finally, there's something in my registry that has not been analyzed correctly as in 'Desktop.log' I found this article: ' | ERROR | 1. Rim.Desktop.Shell | 0 | Error to access the valid bbidprincipals. "I have exported and deleted everything under the 'HKEY_CURRENT_USER\Software\Research In Motion' key, restarted and voila!  I have now received a login for BBID.  Don't know which key it was that I didn't go back and add in each of the values I exported, but there was something in there, he did not like...

  Now I just need to see that this information back to the BlackBerry support group and eventually the Group of desktop software so that they make use.  When the Passport arrives I'll make sure to make a support call and get connected with them.  If anyone has any information to help get to the right people, let me know and I'll push it along.

  Otherwise, if this can help someone, give a post here so that we know that you are affected by this problem as well!  I still don't know which is more precisely on my system that requires him to need this empty openssl.cnf file.  A test VM, I installed it on had not and it works very well, so there is something else in my environment that causes this.

• BlackBerry Smartphones BBM and Yahoo Messenger does not

  Hello! I have a bb curve 8520. I can connect via wifi at home and you can use the internet browser. but I can't sign in to yahoo Messenger and my bbm messages does not send. pls help! Thanks in advance!

  Hi me_nhykk,

  Welcome

  Yes you need a Blackberry data plan to access blackberry application, and if you're going to another country for a visit call your carrier to activate roaming for you

  So it is best to call your provider tell then what services you need and let it activate it for you.

  Good luck

  Prince

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• BlackBerry Smartphones BlackBerry message memory and SIM card are full! Please delete some SMS messages.

  Hello

  typical - just that I was looking to upgrade, I get the following message on my Torch 9800:

  "BlackBerry message memory and SIM card are full! Please delete some SMS. »

  There is a lot of space on the card in the device memory and press. I have deleted many texts and have removed the battery (several times), but the error keeps coming back.

  I am able to text but can't seem to receive - although copies of text messages that I send continue to be saved. I'm having no problem with other forms of e-mail (for example, WhatsApp, Twitter).

  I looked at 3465 Knowledge Base, which advises to uncheck the option "Leave Messages on SIM card", but this has been disabled throughout. (I checked it and saved out of curiosity, which allowed me to receive text only test that I then just sent myself, but after the error message is returned and no other text would come through...) I came back to this area being disabled).

  Any help to fix this would be greatly appreciated.

  When you say you deleted text messages, how have you deleted and how do you think that you have?

  I suggest making a backup with BB Desktop Software. Then, you can use it to do a selective removal of just the basis of message text and see if you can receive messages after that. If you did the backup you can always restore text messages on the device if you want to, although he will crush all new messages on the device.

• BlackBerry Smartphones completely remove the BlackBerry App World and how?

  Can I completely delete BlackBerry App World and how?

  Hi lion 775

  Do you mean that you want to uninstall App World from your device. If it is then for BlackBerry® Device Software 5.0, go to Options >Applications > and then select third party. Then uninstall App world from there.

  KB10040 How to view or delete applications on a smart phone BlackBerry. 

   

  Prince

  _______________________________________________________________________

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• BlackBerry Smartphones Blackberry "BOLD" username and password?

  Hello

  Where can I find my Blackberry ID username and password?

  Thank you!

  Hi LiezDiesel

  If you have not created a BlackBerry® ID, you can go to www.blackberry.com/blackberryid to create a!

  Thank you