os Caddy closure prevention program

Similar Questions

• Data - execution prevention program closed everything permanently!

  For about 3 months now DEP was the closure of all types of programs on my computer that I used for years. Adobe software, many games, my anti-virus, my software now PUPILLARY and registry cleaning software (used for college documents) & Microsoft Office. for about a month now, I not was able to download Windows updates... None of them. I tried since it began to correct the problem, tried all the suggestions on the pages of answers and help from microsoft without success. I finally got sick of the month last and disabled from command promt and it STILL stops! How is that possible? Windows Vista sucks maybe more? Is there something... Is there anything else I can do to prevent it all stop? I need these programs to do my homework. Thanks in advanse for the help :)

  Hello

  EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
  http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspx

  The problem might actually be an add-on or another program to the origin of the problem and you should check that
  1st.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
  machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  not better?

  Close IE and try again IE or IE with no Addons

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and it would be
  unusual with Prevx market except for an occasional cookie of low level (not a big deal), update it, then
  run as a scanner.

  http://www.Malwarebytes.org/

  I would add prevx so.

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program under Vista
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  ====================================

  If nothing else works you can try this however I would use as a last resort.

  IE - Tools - Internet Options - Advanced Options - Security Section - clear the check box enable memory Protection to mitigate
  Online - APPLY - OK attacks close and restart IE

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Prevent programs from starting during boot

  How can I prevent certain programs to start automatically at startup?  I would like the ability to start them manually after the system is booted (OS = WINDOWS7)

  This Walkthrough will show you how to change startup to startup programs. What you want is the second part of «Change of current startup programs»

• prevent programs to get in touch with the internet

  Dear readers,

  I also not if I can block a program to update, or to make contact with the Internet.

  Hello

  Thanks for the response back.

  Have you checked update history to see if the update installed successfully?

  Reference:

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-in/Windows7/see-which-Windows-updates-are-installed

  We will perform the steps described in the article and check out them.

  http://support.Microsoft.com/kb/910339

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  Hope this information helps.

• Data Execution Prevention is blocking programs

  I am an avid player of spades on Pogo.com.  I was very frustrated to find that I am not able to play because the Windows Explorer is stopped by the data execution prevention program.  It is a new problem (in the last 3 days) which seems to after a Windows Update.  Please tell us if you can.   Thanks :))

  Hello

  The problem might actually be an add-on or another program to the origin of the problem and you should check that
  1st.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
  machines, including those that you have uninstalled (they leave remnants behind which emits causes).

  Start - all programs - Accessores - system tools - IE with no Addons - does this work better?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  not better?

  Try IE or IE with no Addons

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Prevx running except a low occasional (not much), updated cookie, and then run it as a scanner.

  I would add prevx so.

  Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  -------------------------------------------------------------------

  Do yourself a big favor and work through 1 above.

  How control DEP but I don't recommend turning it off and certainly not to let power off.

  How to enable DEP on or off for a program under Vista
  http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.html

  How to enable or disable DEP in Vista
  http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Data Execution Prevention will not let me turn off for nothing

  Data Execution Prevention (DEP) blocked one of my games to open. I followed the steps to turn it off, but when I get to the window with the option "Turn on DEP for all programs and services except those I select", it is grayed out and won't let me select it. I am the administrator (my account is the only one on this computer), so I don't know why it doesn't let me do. I have looked everywhere and can not find someone else with the same problem. I have Vista Home Premium, 64-bit, if that helps at all.

  Hello

  First of all, I suggest you to see if a Data Execution Prevention of the game compatible version is available by visiting the website of the software publisher. If the Publisher has not released an updated, compatible version DEP for the program, you can turn off DEP for the program that was closed. You will be able to use the game, but it might be vulnerable to an attack that could spread to your other files and game.

  I would suggest trying the following steps and check if it helps.

  Step 1: Open the elevated command prompt, follow the steps to open the elevated command prompt.

  a. click the Start button.

  (b) in the Start Menu, click programs principally made, followed by accessories.

  (c) in the menu accessories, right-click on command line option.

  d. in the drop-down menu that appears, click on the "Run as Administrator" option.

  e. If you have the User Account Control (UAC) enabled, you will be asked for permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  Step 2: Try the following steps to activate the Data Execution Prevention, using commands.

  a. in the elevated command prompt, type bcdedit.exe/set {current} nx OptIn and press enter.
  NOTE: If for some reason that this command does not DEP after restarting the computer, then use the command bcdedit.exe/set {current} nx AlwaysOn rather.

  b. you should get a success return message.

  c. close the elevated command prompt.

  d. restart the computer to apply.

  Note: Once you are done with step 1 and step 2, try to add the data execution prevention program and check if it helps to open the game or not.

  Hope the information is useful.

• Blocked startup program? Application of UpdateUtil?

  well, ive google search and found next to nothing.

  IM especially try to find what is this program.

  "Application UpdateUtil".

  the name of the file is "netfxupdate.exe.

  He said that the manufacturer is "microsoft", that I find it odd, given that all other microsoft programs in the system configuration menu have "microsoft corporation", as the manufacturer.

  I can't find any definitive info on this program.

  Ive read some comments saying its malware, ive read some telling her for the .net framework. but no official answer as to what it is.

  so...  Can anyone of you thin of the folks at microsoft help me and tell me what it is and give me some clean and valid information on this subject?

  Hello

  Netfxupdate.exe is a file associated with Microsoft .net framework.
  You can allow the program to run on the computer.
   
  User account control prevents programs that require permission or an administrator password from running automatically when Windows starts. If a program is blocked, you will see a message in the notification area that says that some startup need permission to run programs. You can run a blocked program, remove blocked startup programs or ignore the notification.

  To run a blocked program

  1 blocked startup programs right click on the icon in the notification area.
  2. click on run blocked program, and then click the name of the program to run. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To remove a blocked program from startup

  You can remove a blocked program from startup so that it tries to run automatically whenever you start Windows. Removal of the startup program does not remove the program from your computer.

  1 right-click on the icon Start blocked in the notification area programs .
  2. click Show or Remove blocked startup programs.

  Run or remove blocked startup programs
  http://Windows.Microsoft.com/en-us/Windows-Vista/run-or-remove-blocked-startup-programs

• I can train the UAC? I regularly run several programs and UAC asks EVERY TIME if that's OK.

  I regularly run several programs and UAC asks EVERY TIME if that's OK.

  UAC is designed to collect want programs run without my permission.  Why can't have a list of programs that are allowed to run without hindrance when I'm the one initiating this shit to begin with?

  As far as I KNOW, there are four scenarios in which UAC does not:
  • When it is off (obviously!)
  • When the actions of the programme are not potentially dangerous.
  • When a program is run under a high count.
  • When the program is running under the system account.

  Your statement "UAC is designed to catch programs who want to run without my permission" neglects the main point. UAC is designed to prevent programs from performing potentially dangerous actions such as changing the files/system folders or by editing the registry. In other words, a UAC challenge is never directed to a specific application. She always helps that tries to make a request.

  I think it would be easy for Microsoft create a list of "good guys". I also suspect that it would be just as easy for programs not allowed to populate this list without your knowledge, so beating UAC in no time at all.

• Windows 8 locked out.

  Started the Acer laptop but just missed seeing a notice on the first screen - login screen says app prevented the closing down and the computer is locked.

  As I thought I had a virus I pressed the power button and the screen is blank but the laptop is not stopped. I checked the internet on my desk and found that it is a common problem with Win 8.

  I've updated Windows Essentials the previous night.

  I tried to insert a recovery USB flash drive - nothing happens.

  Help!

  That the message is probably not a virus - it is very common for a prevention program stops.  By example, if you have even just a Notepad file open and waiting for you to decide if you want to save it or not, it is likely to block the closure.

  Depriving of electricity directly in now the power button is also very bad and can damage the system.  Use it only as an absolute last resort.

  --

  Regarding the current situation, can you let me know what happens now, when you try to turn on your computer?  Message/error/problem do you see?

• ESX 2.5 Windows servers not close properly

  I have a client with a 3 servers ESX 2.5 and about 6 months ago or not, Windows virtual servers on all the boxes with not stopped completely.  When you go to START, then STOP, it will start at the stop and just hang at a blank blue screen and never the powerdown of servers is complete. It is by performing all virtual machines running in the ESX environment.  All ideas

  I spoke to Microsoft and they said that it is a question of VMware. They are running ESX 2.5.3 build 28065.

  Of course they did, Microsoft has its OWN product of virtualization, it's called "Hyper-V" then of course they giong to point to VM Ware as the culprit, typical MS, if they are not the solution to blame the other guy.  You will ALSO find this problem on THEIR product also and it is more widespread, that they're going to blame then?

  I KNOW , it is a question of Windows because nothing in VM Ware has nothing to do with the stop and since it is through ALL of your virtual machines and we have similar backgrounds on ESX 2.5, 3.5, and I saw this before and I KNOW there are KB articles on MS Windows machines (physical or not) I am familiar with the issue.

  And since it's on YOUR environment, there must be a common product that prevents the closure, which is why I said check the logs... some common service, program or driver you are using is the cause, but it is not a problem with VM Ware, its windows, I don't like what said Ms.  Their product has a LOT of problems with stop (google.com if you don't ' believe me) and there is the solution, fix Windows stop prevention program.

  Antivirus ALSO is a great place to start, since it is probably common among ALL your environments.

• audio won't play

  I have no sound when I try to watch a video or listen to music, like on Youtube or on Amazon music samples. Yet, I can hear the audio to the video on the page demo of Mozilla Add-ons - modules. I tried all the suggestions figure on the page support and none of them work. This problem started about 3 weeks without apparent reason.

  I guess I'm just too literal. When audio is not playing, she didn't act like a crash to, e.g. a closure violent program. The solution was simple. Downgrade the version of Flash Player. I've dropped from 11.3 to 10.3. Problem solved

• Satellite A660 - software DVD 3D works expired or is secretly changed

  Whats going on; Why lynched to pay an extra $59 for software to do my work in 3D satellite?

  Ok.
  This probably sounds nuts; but my software DVD Blu - Ray Toshiba seems to have a DVD/Blu-ray inside prevention program. Prevent 3D questions and smaller.

  It been screwed up since I've updated the software on the Toshiba site and when I updated the drivers from nVidia GTS 350 M.
  It is perhaps false Co to the problems that began in the month previous/s; as I always do not play discs on this laptop; pinning so a date when it went pear shaped is more difficult.

  But, after going through a nightmare (to not work on DVD or Blu - Ray on half of my records for months); I installed the last TRIAL ($59) Corel WinDVD Pro 11 player and everything (including 3D) works perfectly again. But 30 days only; until / unless I'm stripped $ 59 extra, that is.

  The problem is / was;

  3D only worked on half of my discs Blu - Ray 3D to aid pre-installed (and later updated) Toshiba COREL WinDVD media PLAYER. Sometimes he only played 3D side by side; 2 images. No 3D. CURIOUSLY, some 3D Blu - Ray discs were very good. Region code not a problem.

  Toshiba DVD player 3D/upconvertor program was the worst (not the SD version, I do not use).

  3D Toshiba (HD) player would not recognize half of my portable Blu - ray 3D disc player content. Error message "DVD drive not recognized".
  Drive DVD Toshiba would not convert any normal DVD to 3D.
  Toshiba DVD player only play NORMAL 2D executing upconvert (not 3D).
  Drive DVD Toshiba would play only DVD SPEED reduced by HALF when upconvert has been disabled. When you try to play a DVD in normal 2D mode.
  All settings have been tried and modified to correct the problem, about a thousand times.
  Software uninstalled, rebooted and reinstalled a dozen times each.

  I also had to uninstall the software and re - start and re - install the following: -.
  driver nVidia graphics (nVidia own sites 295,73 and re - install the Toshiba 260.51 nVidia driver update 'old').

  I used to be able to convert DVD in 3D using this laptop; If it worked several months before; but now everything has stopped for months.

  It's a pain as I uninstalled everything and re-installed all the relevant software from the Toshiba homepage. but no solution to the problem without being mugged an additional $59.

  I hate computers for the ten thousandth time.
  Hike 1 minute: -.
  Its the latest product from Microsoft, I will never buy (garbage Windows Ultimate [had to buy a new A3 colour lazer printer as no driver Win 7 for my existing laser printer]).
  SAMSUNG (3D internet TV) products in the future. No computers for ten years. Until the rats get it right and stop experimenting on my wallet. $10,000 on PC products in the last 5 years and still being able to do simple things like watching a 3D movie is something blindly.
  I'm hiking... because a hundred hours of reading about how to make it work again jammed my head.

  Spec
  Toshiba A660 3D laptop. Satellite.
  Windows 7 Ultimate. Updated.
  Intel Core i7 1.73Ghz
  Graphic is GTS 350 M
  4 GB of Ram (8-concert of the upgrade on order)
  Spare 550 GB of hard drive space.
  Toshiba site; BIOS update.

  Own 3D DVD Player Toshiba (don't cut the mustard) Version 4.00.1.08

  3D Toshiba Corel WinDVD player (does not cut the mustard) Version 10.0.5.822

  Nvidia graphics still works fine on the background of test page; makes me think of software; but all the software of bad has been updated. Re-installed and re-tried a hundred times with different parameters.

  I thought that the disks were the problem. But 50 DVD not working not not in 3D conversion or defective by themselves? And half of my collection of Blu - Ray 3D?

  I was wondering if these these problems are deeper than this one system. If there is a systemic problem somewhere (apart from blaming the user final buyer).

  Toshiba assist line in one single call was a guy who knew far less than me and had to ask someone to tips for every part of the appeal. 2 hours telling me to re - install the software in a long, slow, bit by bit the way, eventually. We have done everything they can do to help. Now, they seem to blame the discs and have no response.

  Microsoft x 64 Ultimate said his roger all do with them on their Helpline / email help.

  I tried nVidia without result;
  .
  All the ideas; I bite the bullet and everyone ends up being gradually forced to pay for the $59 software get the job of the thing.

  What is the beef?

  You have installed a clean Windows system that isn't preconfigured by Toshiba, so in this case, Microsoft is your point of contact regarding problems of system

  Regarding the error message is this Microsoft Knowledge base article.
  ["0 x 80070057" error message when you back up files in Windows 7 | http://support.microsoft.com/kb/982736/]

• HP Pavilion 15 p073tx: System stops unexpectedly

  I recently bought computer hp laptop Pavilion 15 P073tx.

  From the day 2, he began to create problems.

  My laptop switches randomly at any time without giving any notification when there is enough available battery.

  After that when I press the power button / stop it not to start. First I ve to connect the AC adapter / CC, then it is started. It then displays the status of the battery to 6-7%.

  THIS PROBLEM IS PRODUCT FOR THE LAST 5 MONTHS. HELP HELP HELP PLEASE!

  SOME INFORMATION ON THIS LAPTOP

  HP pavillion noteboom 15 p073tx

  product no: J6L90PA #ACJ

  Series No.: [personal information deleted]

  Ive contacted HELP DESK.

  > they upgraded the version of the bios to F.33.

  > they ran the battery in HP support assistant (OK State)

  then theystarted saying your laptop is OK there is no prolem like that...

  Ive called engg at home

  > He ran a great test of 6 hours, he said, battery cannot be replaced until failure id is generated. {It is show the status OK)

  Ive went to service center

  > they have just formatted windows and returned to me.

  There is no problem of overheating. my test result laptop fan speed:

  GPU: 0C

  HD0: 38 C

  TEMP1: 45 C

  CORE 0: 32 C

  CORE 01:27

  THE TEST RESULT A VAST SHELL:

  failure ID: status OK

  TEST THE BATTERY FOR HP SUPPORT ASSISTANT

  status OK

  cycle number 62/300

  battery age 348 days

  Temp: 34 ° C

  creating capacity 2800 mah

  power: true

  status: 80

  voltage to the terminals: 15683 mV

  cell voltage mV 1: 3918

  cell voltage mV 2: 3923

  voltage cell 3: 3922mV

  voltage cell 4: 3920mV

  DON'T TELL ME IS THERE A SOFTWARE PROBLEM OR HARDWARE PROBLEM?

  DO I HAVE TO BUY A NEW BATTERY?

  IS THERE A SOFTWARE PROBLEM THEN WHY THE PROBLEM PERSISTS AFTER THE PREVIOUS WINDOWS FORMAT?

  He is still having problems. Now, I'm ready to buy a new battery.  Before that, I want a solution that can be useful to solve my problem.

  any suggestions wil be appreciated.

  Hi @hkjxx7,

  Thank you for your query.

  I understand that your notebook is slow at startup and when using.  Here is a link to the HP - computers adjust the performance of the slow system (Windows 8) that should help you.

  Although this link is for Windows 7 it will continue to apply for Windows 8, but you will need to change the way you access things like control panel.   Computers HP - prevent programs to open at the start of Windows 7

  Good luck!

• Failed to install LifeCam HD-3000

  Hello

  I can't install Lifecam HD 3000 on a Win XP PC with all of the updates in the order.
  An error message appears during installation says it failed without and reason and gave the following link: http://support.microsoft.com/kb/953691

  I have gone through all the steps on this link, but does not help.

  I checked the people who have had the same problem, but no help, links below I checked

  • https://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/9b07dba1-2b28-47bd-9423-e4db4b8b5a6f
  • http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/LifeCam-HD-5000-driver-and-software-installation/08e7300e-C32D-4595-9799-deb3016a8041
  • https://www.Microsoft.com/hardware/LifeCam/en-us/default.mspx
  • http://support.Microsoft.com/kb/973297
  • http://support.Microsoft.com/kb/953691

  I also tried mode of fail-safe with network enabled, logged as administrator, but with the same defect.

  Why can't download us manually the installation complete SW?
  (SW 'LifeCam3.60.exe' can be downloaded from

  • https://www.Microsoft.com/hardware/en-us/d/LifeCam-HD-3000

  is not a complete package of SW, it comes in contact with MS and download more things and that is what crashes, we can see the connection in a firewall schedule downloads about 5 MB, which is of ~ 10% of the progress bar up to what it fails, then obviously, the whole package, he wants DL exceeds > 50 MB)

  Please if possible give me a link for the complete SW a manual download, or where to find a generic webcam SW, if it is not please give some advice how to do this, thanks in advance.

  Hi I solved it, please read because it might help you too!

  When I opened this thread I tried for 4 hours to solve this problem * and apparently a lot of people have problems with the installation procedure.

  When I installed the program, I noticed at the beginning in a small window that shows progress, he showed a folder he had created and had a random name composed of letters and numbers such as: 56eb37a890142, go and find him!

  In this case, it creates subfolders where the subfolder has the name «windowsinstaller»

  • Drive:\56eb37a890142\windowsinstaller\x86\windowsxp-KB942288-v3-x86.exe

  (Your path may be different, but the mine was created on a different driver/partition that my Windows driver.)

  During installation, I was going through all the steps (in fact I just leave the installation in the middle of the process, as it is, if I remember there are 3 steps, first unpacking, the other 2 steps is displayed in a new window, and I don't remember now I did the 2nd step, however, this is the 3rd step that fails but in this hack you do not go there)
  ... instead, once the 56eb37a890142 folder was created, I went in the subfolder and installed the

  • WindowsXP-kb942288-v3 - x 86 .exe

  Once this file has been installed, Windows automatically forced the closure of programs and handed over in market, after reboot, I returned to the

  random 56eb37a890142 of the folder and double-click the following file

  • Setup.exe

  All of a sudden the installation went through, obviously something is wrong with the installation program, I think it not to apply the update of windowsxp-kb942288-v3 - x 86 .exe, or somehow fail to do.

  One last thing on the randomness of the '56eb37a890142' folder, I have a low memory, if the installation failed, the folder would be removed, so we might have to make a copy of it.

  Edit: I checked the Windows Installer "windowsxp-kb942288-v3 - x 86 .exe '.

  It's a "Windows Installer 4.5 Redistributable", it can be downloaded separately from the link here below, we could try this instead of the procedure described above:

  • https://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=8483

• Start Administrative privilege

  I want to uninstall some elements to start on my computer but when I do to run msconfig I can uncheck the boxes, I'm not there, but when I hit the button apply he says I have to have administrative privilege and I AM the administrator and the owner.   Help, please!  I'm not tech savvy and I'm slow, like I had 4 races but can help you!  I got 15 to 20 useless items here and I am V E R Y slow
  Thank you
  I tried this 5 times in the last 4 hours and on both accounts I am the admin for both

  I bet you have a HP printer, because there is an HP PML driver that produces this effect of nuisance. It is only a nuisance and you should still be able to make your changes of msconfig, and they should stick. However, if she is really bugging you, you can watch this:

  http://www.pchell.com/support/msconfig_access_denied_error.shtml

  Since this is only a nuisance, I wouldn't bother with fiddling around with the registry to 'fix' this problem, however.

  But there is another question.

  Msconfig is just a diagnostic device. As a general rule, you should never use it to prevent programs or processes to start automatically at startup. On the contrary, you should do the following:

  1 use settings of the preferences of the program itself to ask him do not behave this way (that is, always start each time you start).

  or

  2. If you never use this program and you do not plan to use this program, simply uninstall using Add / Remove programs in Control Panel.

  After the back if you have other questions.