audio won't play

Similar Questions

• Premiere Pro CC 2015 video / Audio won't play - Out-of-Sync Audio and video clock errors

  After the installation of Premiere Pro CC 2015 I am unable to actually play my video in the timeline.

  I must point out that the same video and audio files accurate work perfectly in my previous version of CC 2014.

  Usually when I hit the play button nothing will happen and then after a time it will stutter back and fourth between a small loop (no audio present) and give an error that says "clock Audio and video out-of-sync (instead of time) in"Adobe Player.

  I tried full uninstall and reinstall Premiere Pro CC software 2015 without success. I also tried to delete all the preferences of Premiere Pro to my settings user without success. I should also mention that after effects CC 2015 is oddly also often send me errors do not have enough executives, so I'm not sure if they are related. Once more, the CC 2014 version works perfectly.

  For reference the video file is a .avi with Xvid compression and sound is a .wav. These have always been used exactly the same with CC in 2014 without problem.

  Computer:

  8.1 - fully updated for Windows

  NVIDIA GTX 780 video card

  32 GB of ram

  3770K i7 processor

  All Nvidia drivers are also updated.

  I also ran a full virus and malware scan just in case for some strange reason, that was at fault, and I ran into zero issues. Media Encoder, Photoshop, and Illustrator CC 2015 that all seem to work great.

  I am quite technically savvy and this one left me speechless, that really stinks that I was looking forward to the potential improvements to speed updates. That's life.

  Matt Borchert wrote:

  Nothing seems to be enabled. The CAD is what is selected in CC 2015 as shown in the image above. It is the only available thing to choose, and I can't select None or disable.

  Thank you.  In 2015, CC, you can click on the settings... button in the Audio hardware preferences.  Then in the record of the OS dialog box tab, you can disable manually (for example, right-click and choose the appropriate option) the SPDIF input.  It is only a temporary workaround until get out us a patch with a fix, but let me know if it works for you.

• Audio won't play in the timeline

  Product: Adobe Captivate 2
  
  I have audio associated with a specific slide. When I click directly on the audio in the timeline, I'm able to play. When I click on ' preview - next 5 slides ", the slides and the audio play perfectly.
  
  However, when I hit the 'Play' button in the timeline panel, I hear no audio. The same thing happens when I click on 'preview - play this slide. " This makes editing very difficult and I am faced with a deadline.
  
  Anyone know why this is happening? Anyone know a solution? I would like to recommend Captivate instead of another product we already use, but it's hard to do when weird questions like this arise. Thank you.

  I just realized what my problem was.

  I apparently (coincidentally) you click on the little mute button that appears in the timeline panel. Stupid.

  Thank you
  PL

• My computer has more audio and it won't play the DVD or audio CD.

  As noted in the suubject line, my computer has more audi and it won't play the DVD or audio CD.  It's a hp Pavilion dv6 - 6 c 15nr Entertainment PC.  I have not had a year yet.

  Click on the link below. Enter your product number as that indicated on the Service tag on the bottom of the laptop (can be under the battery). You can also get the product number by pressing Fn + ESC key. After you enter the PN, click Next, then choose the software & Drivers.On the next page use the menu drop down to select your (probably Windows 7 64-bit) operating system. A list will fill with the drivers. Download & save the last Audio driver.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Go into the Control Panel, programs & features - software uninstall IDT. Reboot the laptop and install using the downloaded file.

  ```````````````````````````````````````

  If still no sound, try a hard reset, works sometimes. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall only the power cord for the first start.

  4. turn on

• Why won't my mac won't play music in iTunes?

  I am on iTunes 12.4.3.1 and won't play any sound.  I click on play and audio appears next to the sone but no sound and the progress bar does not move.  I checked the sound settings and volume levels.  Similar questions seem to be a long time ago or refer to the PC.  This could be the cause.  It seems to be intermittent.

  His output shows your output device?

  Do you get sound to other applications?

• Utube videos won't play on FF 34.0

  Everything was fine with Firefox and YouTube, but when I went on YouTube this morning that Firefox kept crashing when I tried to watch videos? He plays either but the vid & audio is very bitty, or I get a black vid screen! or a grey screen with white exclamation mark in the Middle? I tried to reset Firefox, but this did not help, or makes things worse! I've also updated for Firefox 34.0, but still it won't play videos!

  Hi AVITYourway,
  Thank you for your question, I understand that Firefox reset not reset the error you receive. However, can you please check if you watch the video in HD? Or, if this occurs also in Safe Mode?

• I just to authorize a new computer on itunes, but it won't play my songs

  I just to authorize a new computer on my iTunes account but it won't play my songs.

  Try to use Ctrl + B to activate so hidden menu bar, and then use Edit > Preferences > reading and look at the entry for Play Audio to help. This should normally be set to Sound live or Session Windows Audio. Change to the other setting can sometimes help.

  Otherwise see troubleshooting problems with iTunes for Windows updates, tear down everything and reinstall.

  TT2

• My music files have changed in WMA format in Windows Media Player, and now my MP3 player won't play them.

  My music files have changed in wma format in windows media player, and now my mp3 player won't play them.  can anyone help please.

  original title: Media Player

  Download and install WMA to MP3 Converter, then install it, you can get it here... http://www.WMA-MP3.org/

  Then select all the WMA files you want to convert, and then convert them to the MP3 Format.
  The reason why they are WMA is because when you ripped the files on the disc to your pc, by default, Windows Media Player is configured to save in the Windows Media Audio (WMA) Format.
  This default can be changed by opening Media Player and click on Tools > Options
  Then select the Rip music tab
  Format: select MP3 from the drop-down list.
  Click apply and OK.
  Now the next time you rip a CD on your drive hard it will be automatically saved as an MP3 file.

• Player Windows Media won't play byte streams as files are damaged or corrupted

  which is a byte stream because my media player won't play it say files are damaged or corrupt

  Hi AntonyNorcup,

  (1) since when are you facing this problem?

  (2) what is the complete error message you receive?

  (3) when exactly you get this error message?

  (4) what Version of Windows Media Player do you use?

  Method 1: Users have solved a similar problem by Windows Media Player library database,

  You cannot view, add, or delete items in the library of Windows Media Player 11

  http://support.Microsoft.com/kb/925718

  Method 2:  You can also see the steps outlined in the article below

  Error message when you try to use Windows Media Player to stream audio or video from Windows Media Services: «the specified protocol is not supported»

  http://support.Microsoft.com/kb/940029/en-us

• On my laptop XP SP3 WMP11 won't play .wav files

  On my laptop XP SP3 WMP11 won't play .wav files, including the wave of Microsoft sample published in KB 316992, "Information on the types of media files that support Windows Media Player."  He used to do.  She still plays WMA and MP3 files among other types.  I tried to uninstall and reinstall WMP 11 using the software of control panel of configuration or remove without change in ny in use.  Any thoughts on aditional troubleshooting and resolution?

  Hi shbermingham,
   
  -What happens when you try to play using Media Player 11 .wav files?
   
  -You get an error message or error code? If Yes, indicate the same.
   
  Try this step and check if that helps:
   
  a. open Windows Media Player 11.
   
  b. go to tools. Click on Options.
   
  c. on the File Types tab, remember that there is a check mark in the box Windows (wav) audio file. Click on apply. Click OK.
   

  Kind regards

  Divya R - Microsoft technical support.

• DVD won't play and won't install it 'Fix It'

  Hi guys, need some help and can't seem to find a solution to the Board of Directors to date. My laptop won't play no more, the DVD when I insert them that nothing is happening and in my computer, the drive is empty. Audio CD can be played and written without any problems. I saw on the Microsoft technical support that this is a common problem. It gives to think I download "DIFFICULTY", but during its installation, he encounters a runtime error and the installation fails. I also can't find the driver alone on the Web site to download and install. My service pack is updated. Can someone help me please?

  Hello

  ·        Remember to make changes to the system?

  ·        Since when are you facing this problem?

  ·        What is the model of the laptop and who is the manufacturer?

  ·        What Microsoft Fix it are you referring to and what is the exact error that you receive when you try to download the hotfix on the system?

  I suggest you to follow the steps mentioned in the article given below instead of the correct and see if the problem is resolved.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Portable speakers won't play all sounds

  I have a Dell Inspiron 1420, and somehow the built-in Laptop speakers won't play any sound at all, even when Windows starts. I run on a Windows Vista.

  In any case, I tried to go to Device Manager to uninstall my sound thing called "High definition Audio Device", but this still does not work. Then I tried updating the driver, still not working.

  The audio works when I plug headphones to one of the thing taken, but only on one, I have two of these good output jacks.

  Can someone guide me please how I can solve this problem? Thank you.

  Try to run the Dell Diagnostics audio tests. These interactive audio tests are designed to limit the problem software or hardware. The tests are independent of Windows and drivers, meaning that it is not serious if those who are working properly or not. To run Dell Diagnostics

  1 restart the computer and press the f12 key as soon as it begins to initialize.
  2. Select 'Diagnostic' in the start menu. The computer will run its evaluation of pre-boot (PSA) tests before the start of the Dell Diagnostics. In the PSA, you will hear some tones in the speaker system but it does not adequately test the audio hardware. Dell Diagnostics plays an instrumental piece of music complete with battery, so if you hear only a few tones then you have run only the PSA.
  3 Dell Diagnostics should open after the PSA tests, or you should see an option to open it. If you've never reformatted your entire hard drive then Dell Diagnostics will be gone as an option. In this case run it from the CD Drivers and Utilities (resource) If you have a.
  4. Select 'Custom', then the audio tests. (At this point - after you open Dell Diagnostic custom - if you can't find the option to select the audio test is a symptom of an audio chip faulty.)
  5. the tests will run. Alternatively using headphones and listen to the speakers in case a signal path works.
  The tests will play some audio and ask you if you heard.
  6 If you do not hear the music during the test, it certainly means that there is somewhere a hardware failure in the system. In this case Dell will repair the computer if it is still under warranty.
  7. If you hear the audio during the test, but not when you start in Windows, that almost always means the material is correct, but there is a problem with the audio driver or Windows.
  8. error codes: If you answer "no" to any question that the test ask, test generates an error code which can indicate a Dell technician that you answered 'no' to this question. The test does not know the exact component that went wrong. Before you answer "no" to a question, take note of the circumstances at that time here so that you know in general what is the error code.

  *****************************************************************************************************

  If the terst passes then try reinstalling the Sigmatel HD audio driver. You can find it in the Audio category of 1420 downloads page. I suggest that for best results you do not use the Dell Download Manager, simply download the normal way you would be using your browser.

  *********************************************************************************************************

  If the problem persists after installing the driver, you might have a problem with one of the headphone jacks when a computer has this combination of symptoms:

  * Speakers do not work and are not active or deselected
  * Headphone Jack works
  * Reinstall audio driver does not help
  * Audio test Dell Diagnostics passes
  * On models with 2 headphone jacks, you can be "verified" in the dashboard as if in use

  Laptops from Dell with 92HD audio using universal sockets of IDT, which is a bit complicated. In addition to the usual mechanical parts, making also uses current technology & detection of impedance to software configuration of trigger and switching (to send the audio signal to the speakers). There are three areas of potential failure: mechanical, electronic and software. Sometimes a little gentle wiggle of a plug in the plug will get to resume normal operation, at least temporarily. There is a safety edge stem into the socket (pin Sense_A) that is used to detect the presence of plugs, and it may be the cause of the failure to trigger the ignition of the software. Failure of the sense pin usually results in the computer behaves as if there is always a plug into the socket.

  Normally the audio test of Dell Diagnostics would confirm that there is a hardware problem, but universal Sockets can cause a false result Diagnostics. This is because diagnoses running BACK, outside of Windows, so a software configuration problem Windows is not relevant to test even if in this case it is caused by the material. If the audio test can spend in Diagnostics, signaling correctly that the configuration of the software is the immediate cause of the problem, but it lacks a hardware, the Jack or safety edge Rod problem, what the root cause. In these cases the reliable diagnostic procedures are only to try a new motherboard or use PC Restore (called Factory Image Restore in Vista) to restore the computer to its original as in factory configuration. If the speakers do not always work after PC/Factory Image Restore, then it is definitely a hardware issue even if it passes the audio test Dell Diagnostics normally infallible.

• My film won't play in movie maker

  I worked on a movie and it was beautiful. All of a sudden, he won't play. In the table of Storyboard and the timeline at the bottom, all my pictures are here. But, when I click on play, the side screen stays black and it says that my storyboard is empty.

  Hi henderk,

  This problem may occur because of the present video filters on the computer.

  Unfortunately, not all the video and audio filters that are installed by other programs are compatible with Windows Movie Maker. This can cause problems when you import video and audio, the audio and video preview on the table of storyboard / timeline or publish a movie.

  I suggest to disable video filters, follow these steps:

  Director of open windows

  1. click on Toolsand then click Options.

  2. click on the compatibility tab.

  3. to turn off a filter, clear the check box next to the name of the video filter.

  Now, check if the problem is resolved.

  For more information, see the link below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/video-filters-in-Windows-Movie-Maker-frequently-asked-questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Tutorials video Adobe won't play (Internet Explorer 11)

  This problem is hit and Miss, but I'm running through a number of Adobe videos that won't play. They start to load and then nothing happens. The screen remains blank, no audio and video No. What is happening on three different computers also.

  Here are three links that show the problem...

  https://helpx.Adobe.com/Photoshop/how-to/Lightroom-Photoshop-workflow.html?set=Photoshop--CL e-techniques

  household https://helpx.adobe.com/Photoshop/How-to/Photoshop-CC.html?Set=Photoshop--Get-Started--Ove

  https://helpx.Adobe.com/Photoshop/how-to/crop-remove-Photo-edges.html?set=Photoshop--get-s reconnection - critical-beginners

  Here are three links that work very well...

  https://helpx.Adobe.com/Photoshop/how-to/design-with-artboards.html?set=Photoshop--whats-n ew - 06-2015

  picture https://helpx.adobe.com/Photoshop/How-to/Photoshop-sharpen-photos.html?Set=Photoshop--Fund amentals adjustment-

  https://helpx.Adobe.com/Photoshop/how-to/create-photo-gallery-without-coding.html?set=Phot oshop - key-technical - showing

  I have tried many other websites and do not see this issue. I have no problems viewing videos from Adobe TV or YouTube for example, Netflix, Amazon and many, many others.

  My version of Flash is the last 18.0.0.232 running on Windows 7, 64-bit with IE11. All programs are updated to their latest versions. I deleted my Flash player and IE hiding without result. Also, I rebooted my router without change. I found a site that seems to be a fairly comprehensive test of my Flash installation and internet connection. My three computer configurations pass all the tests. If you want to test your Setup go to: https://www.brighttalk.com/pages/customer-support/test-your-system. I went to a number of other sites of test of Flash player that worked.

  If anyone has any ideas as to what I'd appreciate your comments. Some of you can at least try these websites to see if you see similar problems.

  Thank you!

  All 3 examples work in Safari, Firefox and Chrome on my systems.

  And the videos are not Flash based.

• Band audio will not play when burning to DVD or save it to a file.  Help!

  When I edit and playback a video project, the soundtrack plays back fine.  But when I burn it to DVD or export to a file, the soundtrack is silent.  He always played audiotracks coming from the original video, but it won't play the song for the soundtrack I added to the video.  I have this problem only when I do an HD version.  The source sountrack'u file is in standard wav (44.1 khz).  Project settings include:

  HDV 1080i editing mode

  TimeBase of 29.97 frames per second

  1440 x 1080 video image size

  Thank you very much for your help!

  Welcome to the forum.

  Am I right that you burn an AVCHD DVD to be played on a BD player?

  What are the specifications for the export/share file. you choose?

  The two video Audio & Export Export are checked?

  Tab multiplexer, which occupies to DVD, or something other than "None"?

  What happens if you move your "soundtrack" Clip Audio to any Audio track empty, except for the soundtrack?

  Good luck

  Hunt