OS6 Misfortunes of Permission. However very well in OS5? Help!

Hello

I am currently a few problems while trying to get my application to request the permissions the application of start-up OS6.

The application is currently all works well and to ask permission only once in OS5. The application works as expected. However for OS6, is is not even quick, and of course my application does not work like its supposed to...

Below is my code OS5 to manage permissions. It performs a check and guest.

My question is double, first, how can I get the code below to work on the OS6, and second, is there a way to change the code so that it works on OS5 and 6, wilthout the need to make different versions.

Thank you very much

import net.rim.device.api.ui.*;import net.rim.device.api.system.PersistentObject;import net.rim.device.api.system.ControlledAccess;import net.rim.device.api.applicationcontrol.ApplicationPermissions;import net.rim.device.api.applicationcontrol.ApplicationPermissionsManager;import net.rim.device.api.system.ApplicationDescriptor;import net.rim.device.api.system.ApplicationManager;import net.rim.device.api.system.Application;

// our application class fgw_main extends UiApplication{

    // applicatione entry point    public static void main(String[] args)    {

        // create an instance of our app        fgw_main theApp = new fgw_main();

        // "run" the app        theApp.enterEventDispatcher();    }

    // app constructor    public fgw_main()    {               _assertHasPermissions();        pushScreen(new fgw_initial_setup());     }

private static void _assertHasPermissions() {

    // Capture the current state of permissions and check against the requirements.    ApplicationPermissionsManager apm = ApplicationPermissionsManager.getInstance();    ApplicationPermissions original = apm.getApplicationPermissions();

    boolean permissionsOk = false;    if     (        original.getPermission(ApplicationPermissions.PERMISSION_FILE_API) ==        ApplicationPermissions.VALUE_ALLOW        &&        original.getPermission(ApplicationPermissions.PERMISSION_INTERNET) ==        ApplicationPermissions.VALUE_ALLOW        &&        original.getPermission(ApplicationPermissions.PERMISSION_RECORDING) ==        ApplicationPermissions.VALUE_ALLOW        &&        original.getPermission(ApplicationPermissions.PERMISSION_WIFI) ==        ApplicationPermissions.VALUE_ALLOW        &&        original.getPermission(ApplicationPermissions.PERMISSION_MEDIA) ==        ApplicationPermissions.VALUE_ALLOW        &&        original.getPermission(ApplicationPermissions.PERMISSION_SERVER_NETWORK) ==        ApplicationPermissions.VALUE_ALLOW        &&        original.getPermission(ApplicationPermissions.PERMISSION_CROSS_APPLICATION_COMMUNICATION) ==        ApplicationPermissions.VALUE_ALLOW    )    {        permissionsOk = true;    }    else     {        // Create a permission request for each of the permissions your application        // needs. Note that you do not want to list all of the possible permission        // values since that provides little value for the application or the user.        // Please only request the permissions needed for your application.        ApplicationPermissions permRequest = new ApplicationPermissions();        permRequest.addPermission(ApplicationPermissions.PERMISSION_FILE_API);        permRequest.addPermission(ApplicationPermissions.PERMISSION_INTERNET);        permRequest.addPermission(ApplicationPermissions.PERMISSION_RECORDING);        permRequest.addPermission(ApplicationPermissions.PERMISSION_WIFI);        permRequest.addPermission(ApplicationPermissions.PERMISSION_MEDIA);        permRequest.addPermission(ApplicationPermissions.PERMISSION_SERVER_NETWORK);        permRequest.addPermission(ApplicationPermissions.PERMISSION_CROSS_APPLICATION_COMMUNICATION);        permissionsOk = apm.invokePermissionsRequest(permRequest);

    }    if (permissionsOk)     {        // do nothing    }    else     {        // exit        System.exit(0);    }}   }

Fixed! Please ignore!

Tags: BlackBerry Developers

Similar Questions

  • Printers keep crashing when you try to print documents CS6 but CS5 documents print very well. Please help, we need advice. What should we do?

    I work in the graphics department at a small company.

    All our computers run Mac OS X and contain the following versions:

    -10.6.8

    -10.8.5, and

    -10.9.5.

    The old Macs (10.6.8 & 10.8.5) run Adobe CS5 Standard and the new computer, Mac OS X 10.9.5, Adobe CS6.

    -10.6.8 has CS5

    -10.8.5 has CS5

    -10.9.5 has CS6

    Whenever we try to print something from new computer, it keeps crashing my printers. The new computer installed CS5 but it was a trial version. CS5 documents printed computer again very well, but the CS6 documents always planted printers.

    -10.6.8 prints CS5 documents very well

    -10.8.5 prints CS5 documents very well

    -10.9.5 prints CS5 documents very well (except CS5 is a test which has already failed), but documents CS6 crash printers (both)

    I have a HP color LaserJet 5500hdn (printer CMYK) and a HP LaserJet 4350tn (printer b & w). They are two old printers but can process documents CS5 from any of our computers. The new computer, though, even if it is opened in Adobe Acrobat/Reader, printers will be break.

    We tested a new Dell 2350dn to print documents of CS6, it works beautifully, but the printer ink is too expensive, about $50 more than our current CMYK printer.

    We wish all our computers to run the same Creative Suite (preferably CS6 CC is too expensive for our needs), but we can't upgrade our old machines until we get this sorted printer problem.


    Adobe has a list of compatible printers or drivers/updates that solve the problem of the printer crashing for CS6?

    Sorry, I have over my work there so this question is no longer relevant to my needs or interests.

  • plays very well on the rocket, but not on windows support

    I borrowed a CD from a friend of mine and downloaded music on WM then I sync them with my rocket. The problem I have is that when I try to play music of WM I get 'no sync rights' and when I play music from my rocket they play very well. can someone help me with this problem

    Thank you.

  • How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

    Switch issues. Help, please.

    How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

    Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

    -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
    -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
    -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

    Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

    It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

    To save the manual copy and the new hits of the ipconfig/all command output-

    First connect through switch.
    Open a command prompt window (start > run > cmd > OK)
    Type the following lines in the black command prompt window and press ENTER after each line

    echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
    ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

    Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

    echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
    ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
    Notepad '% UserProfile%\Desktop\ipinfo.txt '.
    output

    Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

    You can delete ipinfo.txt on the desktop when you are finished.

  • My secondary hard drive (f) disappeared. However when I run windows xp (sp3) in safe mode, it is there and works very well. Help please.

    My secondary hard drive (f) disappeared.  However when I run windows xp (sp3) in safe mode, it is there and works very well. Help please.

    Hello what jay,

    Thank you for your message.  Please, try the following:
    Click 'Start' > right click on 'My computer' > select 'manage '.
    Click on "disk management".
    Here you see secondary hard drive?
    If so, you can assign it a drive letter and everything should be good.
    Please let us know if it did or did not help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • I have first items 13, recently installed on a new laptop of Dell Inspiron 17 5000 Series. The program works very well. However, when I have access to the program, I get a message that there is an update available, 13.1. I let you go ahead and do the upda

    I have first items 13, recently installed on a new laptop of Dell Inspiron 17 5000 Series. The program works very well. However, when I have access to the program, I get a message that there is an update available, 13.1. I let him go ahead and do the update before using the program. It only updated, then restarts first elements 13. As soon as the program loads, I again get the message that 13.1 update is available. How to stop the happy ground?

    RTA,

    Thank you very much for your answers. As you suggest, I went to the help/updates and found that 3 points were scored update, Manager, 13 Photoshop and first elements 13 elements. On a hunch, instead uncheck one of them, I thought I'd see what would happen to let update all 3. It took a while, but, long story short, stopped the happy Vangogh and everything seems fine. Thank you for your messages, much appreciated.    Walt Maken

  • I have a modal using html and css that opens very well.  However, given that modal is on layer 2 layer 1 objects fade out (gray out) in the background.  I can't put the modal on the top layer, so that it appears on all my pages.  It is specifi c that

    I have a modal using html and css that opens very well.  However, the modal is on layer 2 that the objects in the layer 1 fade out (gray out) in the background when the modal opens.

    I can't put the modal on the top layer, so that it appears on all my pages.  It is specific to the single page on my site.

    Here is the link: http://www.ueonline.com/website_NEW/certificationsapprovals.html#openModal

    Any help is appreciate!

    You can create a separate mask for this specific page with modal to the top layer and then apply that master page.

    Thank you

    Sanjit

  • My incoming mail 'outlook' works very well; However, the outgoing never pass. I get an error with the State report. What gives?

    My "Outlook" or "Outlook Express" never seems to complete an outgoing message.  I get very well.  When I try to send, there is an error message.  What gives?

    Hi BrendaJones,

    1. What is the exact error message you get?

    I suggest you try the steps from the following link and see if that helps.

    Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express
    http://support.Microsoft.com/kb/813514

  • I had recently a hard drive fail. Now when I try to reinstall CS5, it gets 85% done and then stops and says that it cannot install HAVE or ID PS settles very well however

    Any contributions to this issue would be great. First I thought maybe it's serial number, but since it downloaded PS very well so I don't understand why it would be that. Here's what it shows...Screen Shot 2015-07-20 at 3.19.02 PM.png

    We need remove the remnants of Adobe CS 5 of your machine first.

    Please delete all folders and files.

    • ~/Library/application support/Adobe
    • / Library/Application Support/Adobe
    • ~/Library/preferences/ (.plist file) related to Adobe

    Try and install CS 5.

    Waiting for your response.

  • When I export a PDF document, half of my text is blurred in the Viewer. However, it prints very well. No idea how to fix?

    I have created a PDF file and for some reason when I discovered in Acrobat Pro or Adobe Reader half of my text is blurry. I tried to export a handful of different ways the two spectators. The text is blurred, but it prints fine both players. What is the reader, the user with the pixelation, CMYK, RGB error? I have really no idea. Is attached a screenshot of what it looks like. I export from Indesign features of illustrator files are linked and printing very well. I'm working on a MacBookPro and my printer is an Officejet 6700.

    Screen Shot 2014-12-23 at 7.56.47 PM.png

    I have fixed the problem. It was something with the color of the text and the values of k. I pointed out all of the text in the text box, including the text that is not blurred and made sure to transform any return to the true black with no line. From there on, I changed my text in blue to the color I got it. Exported without maximum loss at 300ppi. everything seems to work properly and now the PDF is superb in the Viewer.

  • iPhone 5 only connects very well with 5 Ghz Wifi

    Hi all

    After trying Beta iOS10 I 'come back' iOS9 and I discovered that my iPhone 5 will not connect very well to 2 .4GHz wireless networks. The problem is that the iPhone or do access or has a very poor connectivity, so that I can use this wifi perfectly with my iPad or Macbook.

    However this iPhone connects perfectly to Wifi 5 GHz networks and works as it should.

    I tried to reset, restore the default values, reinstall iOS... any suggestions?

    Hello iovin80,

    Thank you for using communities Support from Apple. I know having a problem connecting to the Wi - Fi on your iPhone, it's not what you expect. If I understand correctly, you cannot connect to the network 2.4 GHz Wi - Fi, but the 5 GHz channel works very well. I suggest to test it on another Wi - Fi network to see if the problem is resolved. You should also check the recommended settings to avoid any interference in the present statutes:

    Potential sources of Wi - Fi and Bluetooth interference
    Recommended settings for the WiFi routers and access points

    See you soon!

  • V13 Firefox slow to access the voice mail or google google works very well in internet explore

    I just updated firefox to v13 and now its really slow to access the google mail and google voice. I get a message that it is connect to google, but nothing happens. works fine on internet explore. other web sites seem to work end

    Hello

    I use V14.0.1

    I had simliar problems both at home and at work while using Firefox. IE and chrome works very well in these two places.

    While I am at home, and not using any proxy, it worked after disbaling spdy i.e. network.http.spdy.enabled set to false.

    However, when I'm at work (by browsing through a proxy, Ironport in this case) and it does not work. I noticed that it is not only the keyword google search or google sites, but none of the https / ssl working site. He invites me repeatedly for authentication of the proxy, and even if I type my proxy username and password, it does not work.

    I have been with older versions of firefox for a while and have not had this kind of problem before.

    Any idea?

  • 12 Firefox on OS Lion does not obtain the crash report on a second account on the past. On the main account (admin) it works very well and also on a third test account.

    12 Firefox does not get beyond the crash report. This is a second account (standard). However, it works very well on a third party, as well as on the main one admin account. I reinstalled Firefox, disc repaired permissions and so on, but nothing helped. For the second account .plist file could be damaged? I can't remove it because of permissions so cannot test this. Please notify.

    Try to repair disk permissions:

  • My video played very well yesterday, now, he will play not (only a black screen in preview).

    My video played very well yesterday morning, now it won't play.  I only see a black screen in preview.  Shake the black screen and it says "clip"stopped"I tried to start to play arrow under black screen, arrow of reading of chronology and play and play upward timeline option.  I can even change the duration for each slide, add and delete audio and insert pictures.  I can not however add a title no longer slide.  Help, please!

    My video played very well yesterday morning, now it won't play.  I only see a black screen in preview.  Shake the black screen and it says "clip"stopped"I tried to start to play arrow under black screen, arrow of reading of chronology and play and play upward timeline option.  I can even change the duration for each slide, add and delete audio and insert pictures.  I can not however add a title no longer slide.  Help, please!

    ==========================================================
    I can only imagine that you are referring to Windows
    XP Movie Maker 2.1.

    Some general info that may be worth a visit:

    Since the issue is recent... it may be worth trying to
    do a system restore to an hour before the beginning of the question.

    See the following article:

    (306084) how to restore Windows XP to a previous state
    http://support.Microsoft.com/?kbid=306084

    If you have automatic updates of Windows...
    possible that a driver has been downloaded and installed
    It's not as compatible with your system such as
    you already had. This sometimes happens with video
    Drivers. You can try a system restore or a driver
    Roll back

    (306546) HOW to: use the driver to restore roll back feature
    a previous Version of a device in Windows XP driver
    http://support.Microsoft.com/default.aspx?scid=kb;en-us;306546

    Three possible causes for Movie Maker questions

    (1) the incompatible source files... (eventually... MPG or MP3)
    It is sometimes useful to turn off the filters.

    Tools / Options / Compatibility tab, uncheck all filters...
    also, it may be interesting to try left click on "restore all".
    Default button".

    Several formats are apparently compatible with
    Movie Maker, but the most reliable choices are:

    Photos - bmp
    Video - wmv
    Audio - wav, wma, wmv

    (2) files source corrupted... the only solution for this would be to
    Remove the source files of the project one at a time and
    try to save each time until the problem file is discovered.

    (3) project is too big or too complex for system resources.
    Create several small projects... Save as WMV.
    Then re - import WMV files collected / drag in the timeline
    and record the final movie.

    XP Windows Movie Maker 2.1...
    To save in a .wmv movie file...
    Type of... CTRL + P (or go to...) File / save movie file)
    to open the wizard movie recording.
    Choose... My computer.
    Next /.
    Enter a name and a location.
    Next /.
    ICT... "Best quality for my computer.
    Next /.
    Wait while the movie is saved.
    Finishing...

    XP Windows Movie Maker 2.1...
    To save a DV - AVI movie file...
    (and other options)
    Type of... CTRL + P (or go to...) File / save movie file)
    to open the wizard movie recording.
    Choose... My computer.
    Next /.
    Enter a name and a location.
    Next /.
    Show more choices.
    Other parameters.
    Open the window of the droplet and choose... DV - AVI.
    Next /.
    Wait while the movie is saved.
    Finishing...

  • 2nd WVC54GCA works very well on the LAN, but I don't see it on the internet

    I recently bought a 2nd camera, so I can remotely monitor the 2 places home. The first camera that I put in place with the other default values that address static ip, I gave him, shipped port port 80 and when I type in my dynamic dns name like "http://myname.dyndns.org:80" it works very well, in fact I have same need to type the port number and it works. The dynamic dns used to take me direct to my configuration of routers (WRT54GL) but now I just type in: 8080 to the end to get to the configuration of the router to the internet. In any case, it works well and I can take pictures, live video monitor, movement detected email snaps etc. without any problem.

    Then I bought a 2nd WVC54GCA and together to the top of the same thing, he has assigned a static IP address and on the options page I activated the replacement web access port and left port 1024, port forwarded in the router with the new ip address and the port etc.  I can access the camera very well via a browser on my local network using the ip address: 1024 or the 'myname.dyndns.org:1024', but I can't access the cam 2nd via the net now. I am confused at this point, I didn't know that a second dynamic dns would be necessary since the device is configured to use a different port, and when I try using the ip address: 1024 it makes no difference anyway.

    Am I missing something here?

    What I thought was the problem wasn't, I had my port of port of port forwarding on the same number, and when you set the parameter port internal address port forwarding port, which is 80 in the case of the linksys cam.

    Once again that I realized that however, 1024 still wouldn't work, so I changed it to 8081 since my routers gui port is 8080, and I had to change the port setting to 81 in port forwarding and add: 81 to my dns address for it to work.

    Linksys should be ignored during the first 80 or some thing, or perhaps 80 is the default, because before when I wanted to join my router gui all outdoor I had was my dnyamic dns name without the: 8080, and when I added a cam to the network it would go directly to the cam, unless I specifically set : 8080 to the end.

    In any case, I have now the two cams work and accessible. For what it's worth, if there are people from linksys playback of this member of the Board they are terrible docco to explain things, the monitoring software is buggy as all get out and if I struggled as a computer scientist looks at work then the average schmoe stands little or no chance...

    My $.02

Maybe you are looking for