OSv 10.6 laser showing 1320 jet inactive status
I have mac OS 10.6 and the problem which shows idle when printing send that I've updated the printer driver did everything I could do, but always on the same post please if someone knows the solution thanks
Hello
I did not anything, I only take my operating system in the company of the installation or upgrade of any software, I don't know, and after that my printer started to work immediately
Tags: HP Printers
Similar Questions
-
Original title: power Hp Printer down.
I have a HP laser jet M1522nf. I had a computer built and use windows 7. The correct driver has been installed Hp online. It works very well. Just within the last hour, when I go to scan for e-mail to join my printer turns off in the middle of scanning.
What could be the problem?Hey Txmt,.
Have you made sure you have the most recent firmware? There was a version of firmware at the beginning of the yer. You can find the firmware here: HP LaserJet M1522 Firmware Update Utility
You receive an error before the printer turns off? Finally, it is a version of 32 or 64-bit Windows 7?
Thank you
------------------------------------------------
Sean S
Although I work with HP, I speak for myself and not for HP. -
New server showing nic as inactive
Hello
I have just to perform a new installation of update 4 1 esx Server 460c G6 BL. When I log into virtual Center and air a two network adapters, it shows a network adapter is down. I can't understand why this network adapter is down. Any ideas?
Thank you
Derek
Derek,
If you have Cisco switches, take a look at the HP Advisory following http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01869687&lang=en&cc=us&taskId=101&prodSeriesId=3884113&prodTypeId=15351
André
-
Laser color HP jet pro M277dw: Fax not recognized
This printer has been connected to our network (wired to our router) and everything worked perfectly.
Then the router connection has been moved to another port of the router and then focused on the fax machine failed. In the device window and printer, it was more like a Fax M277dw and the manufacturer has not been recognized. So I thought that I remove it and reinstall but that was not possible.
I tried to restart the configuration of the fax, but it did not recognize my printer and said the IP address to be updated.
I added the printer again and then run the fax configuration and everything went well, but I'm not yet find a HP M277dw fax in printers and devices window. The fax only on the page is the generic fax.What should I do? Should I uninstall everything and start over?
Thanks for your suggestions.
I ended up uninstalling the printer and the related pilot and then reinstalling everything and now all is good. Somehow I must have lost the fax driver.
-
Laser color HP jet pro m452dn: problem of printer tray
Added the paper in the main paper tray and now it will not close as if something is blocking, but I see no obstacles. Have had printer less than a week
You have inadvertently used the blue latch to extend the tray for legal size paper?
-
Virt Center 2.5 shows no nic failover status
Hello
We bring a new ESX3.5 U3 DR/HA with Sun X 2200 cluster as nodes and experiencing several network problems.
When testing failover nic that the Virtual Center displays correctly that nic is not available but does not show standby nic is active even if the old standby nic seems to be an OK traffic. Has anyone else seen elsewhere?
Thank you
Tom D
Welcome to the forums,
This is a known issue, only way to see what is happening is via esxtop, you would see the mb of the jump from the first to the second network adapter.
Duncan
Blogs: http://www.yellow-bricks.com
If you find this information useful, please give points to "correct" or "useful".
-
Firefox checks not my plug-ins to show that they are updated
After that I updated the Flash of Adobe Java yesterday, the audit function plug-ins for updates was correct. This morning, it's just
sits there and turns without doing anything.Have never had this problem in the past.
Please try and check directly using Adobe site if you have problems with https://www.mozilla.org/plugincheck/ {it works ok for me now.)
There are or were known issues with Mozilla servers recentlyhttps://support.mozilla.org/en-US/for.../711040?last=63882#post-63882. I guess that well-publicized issues requiring updates FlashPlayers increased loads.
- This shows most services https://status.mozilla.org/
Check that your Flash Player is up to date by visiting http://www.adobe.com/software/flash/about/ separately with each browser.
-
How to show busy indicator on the screen?
Hi all
We have a little blackberry app. In one of our screen when the user makes a connection, an e-mail is sent to the server for authentication of the connection. It takes some time before a response comes back to the device.
During this period when the server verifies the authentication, we show a screen with status busy as a progression or some animated symbol bar so that the user gets an impression that something is happening in the background.
Could someone let me know how we can do this?
An example of code will be appreciated.
Thank you.
It might be something useful here too:
http://supportforums.BlackBerry.com/T5/Java-development/waiting-dialog/TD-p/580795
-
No way of knowing through the API if an Echosign user is inactive?
Hello - I am working with the SOAP API - y at - there no way via the API whether an Echosign user is active or not? the getUsersInGroupResult table contains only:
[groupKey] = > * key *.
[company] = > * company *.
[email] = > * email *.
[fullNameOrEmail] = > * name *.
[take] = > * user key *.
Even if I shoot at all users and affected the API once again for each user to get the getUserInfo UserData, it still doesn't look like an active/inactive status:
API - Document eSignature software - Adobe Document Cloud methods
Looks like it would be trivial to add:
[status] = > ACTIVE
in the getUsersInGroupResult-
THX
Hello Nbennett25,
I took this as a feedback and would certainly pass.
Kind regards
-Usman
-
Balance sheet of the conditionally show by checkbox checked
All,
I have created 8 check boxes:
'Source '.
STATIC2: a 1, b; 2, c; 3, d; 4, e; 5, f; 6, g; 7, h; 8
According to c (checked) I want to show a report.
Status of the report:
"Function from PL/SQL body returning a Boolean".
Start
If (: c = '3') then
Returns true;
on the other
Returns false;
end if;
end;
But it does not work.
Any help appreciated,
See you soon
LucioYou must call the name of your box, not: c If your box has been named P1_SOURCE your code so as:
begin if (:P1_SOURCE= '3') then return true; else return false; end if; end;
-
Small gaps with colored fills cells
MAC OS X
I get these accessories lines appearing between some of the line.
Any ideas on what may be the cause of these?
Thanks for any help.
Graphics artifact card scaling. Once you approach it should be gone. PDF files even shows that, whether rendering PDF tool. Usually won't be visible when printing. You can test printing on laser or ink jet printer.
-
Pages / Question: printing black fine lines table in black instead of halftones
Hello community,
someone know how to print tables with fine black (i.e. below 1 point) lines without halftoning of pages?
I tried on several printers (laser and ink-jet, color as well as PC, usb and network connections).
No matter what line table below 1pt is pure black halftone instead.It affects only the rows in the table. Forms with fine lines, small texts, etc. are okay.
Any ideas? Help, please.
Hi fraha,
Try this. First turn off the grid.
Now apply cell borders
Print Preview
Please answer if that is not what you want.
Kind regards
Ian.
-
ThinkPad e440 ubuntu red inalámbrica desconeccion
Buenas queria comentar sober one problem that I am having in una particion wont Xubuntu 14.04, el problema tengo're despues UN rato conectado estar has the coneccion una red inalambrica is desconecta, durante mucho tiempo, pero me sigue las showing redes e alcanze, no hay otra forma of poder volverla a connect that reiniciando the computadora.
He probado desintalando Network-Manager y usar wicd pasa exactamente lo mismo, pero en otra particion tengo wont windows 7 el cual no tiene any problem.
MUCHAS gracias.
Hola, lo he fixed following steps of this blog... Lo unico en 14.04 version than not me satisfied, pero en version 13.04 (that are that currently I am using) works best, I say 'better' than hay por redes en las which sufro cortes repentinos... no todas en, en gran mayoria works well.
-
Dear Sir or Madam:
How a CD is read from a CD-ROM (Compact Disc - Read Only Memory) disc or a DVD-ROM (Digital Video Disk - Read Only Memory) drive until it begins to burn this CD image to a CD - R disc?
How is the process of burning on a disc CD - R when copying an audio CD or a CD?
Please reply back soon.
Thank you.
Hi Etow,
Thanks for the reply.
Any type of data are stored on the surface of the CD or DVD in binary code (0100101010101) which contains zeros and ones. When these data are 'burned' on the surface of the CD or the DVD laser Burns holes in them. The holes is '1' and the empty space between represents "0". So when laser shows the surface of the CD it reflecting essentially binary code to your music, movie or something that you have stored.
When you burn a CD, the CD burner laser runs on the surface of the disc to burn the binary data. It begins at the deepest part of the CD and working outward.
Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.
-
I'm finally moving to pix to print color on my MG7120 (with Mac Photoshop Elements file 10.6.8}.
The picture is bright, saturated and contrasty. Printing is flat and unsaturated almost to be a monotonous.
I use glossy photo paper and have chosen high quality. Is there something I can do or the printer is faulty?
I forgot to say that I had run the test and it came out perfect. (Thanks, Patrick.)
Then I noticed that the paper I was using says laser not ink jet, so I was wondering if that was the problem. Around rooting in the closet, I came across a few sheets of Canon matte photo paper that came with the printer. I tried it and, voila!, the color came out true. So maybe the printer didn't like Hammerhill brand, or laser paper needs different inks, but the problem proved to be the PAPER!
Problem solved. Now, I need to run out and buy the book.
Maybe you are looking for
-
Any other details in Keychain Access
I bought a second hand MacBook Pro and can see someone other details in Keychain Access. Is it safe to delete these?
-
iCloud, game and music confusion Apple iTunes music library
OK, first of all, I was a Match iTunes and subscribe Apple music, but before not to renew iTunes game, I asked and he said that if I keep my subscription to Apple's music, I would not lose my iCloud library. But its been a month now since the end of
-
Reading of RS232 event structure
Hello I use the Write.vi to read RS232 attached as a starting point and do RS232 - help.vi him. successfully, the original written 1 posts, then wait a little, then reads 1 message. What I'm trying to do is to be able to read several messages. So I w
-
The Windows Developer Preview expires in 2013/115?
my windows 8 dev. Prev. expire in 2013/115 my is that beta? normally it will be completed in March .photo of cabin of the image:http://desmond.imageshack.us/Himg23/scaled.php?server=23&filename=64074771.png&res=medium
-
How can I reinstall windows on my x 1 CTO 3443 8?
Hello I want to completely erase my current installation of windows 8 that I have too many programs it junking upward. I want to reinstall it again and again. But when I got the laptop lenovo did not send me a windows disc so I'm not sure now to go a