Small gaps with colored fills cells

Similar Questions

• I'm getting white gaps between the black contour lines and color fill on laser printer

  I'm getting white gaps between the black contour lines and color fill on laser printer

  You're welcome, Calotypist.

  Illy prefer PostScript because it gives you a reliable/complete (more) reproduction (depending on the version, you can also see (more) complete print failure).

  With a PDF basically tell you the printer where to put the points/tasks. Without it, the printer (pilot) has to figure (some) outside.

  If you can get one for the printer in question, a printer PostScript (emulation) driver will leave you direct printing.

• MS Paint "fill with color" tool does not work. :(

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  In the painting, my "fill with color" tool (the pouring paint can) does not work. I click on the box, I click on a different color, the icon changes to the can, but when I click on a space as say an empty circle, it doesn't do anything. Right click, nothing, left click, nothing.

  I noticed that the only thing he is able to do is to change a solid color that I did (as a solid black rectangle) in a different color, but only once. If I rectangle black color green, I can't change it to any other color after. I don't know what is happening.

  I am not edit a photo or anything btw, I start a new painting from scratch file. I'm trying just to circles of color and enclosed spaces. I've done this dozens of times with no problems. I tried restarting the computer and paint without effect.

  Thanks for any help!

  Hé salés

  try to run the sfc/scannow command. to repair the corrupted system files

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Walter, the time zone traveller

• Framework will not completely fill with color InDeisgn CS

  I have a recurring problem in InDesign CS, but this project don't happens only every six months, and I don't remember how I came across the solution from last time. Hope someone might be able to help.

  I have a page layout left magazine, that I have used for years with just a couple of blocks of text and a picture. I have not changed in ages content, except to switch text updated with each new issue. (It's just an editorial page, essentially).

  Behind this layout, I placed a picture and filled with a beige background.  It begins at the gutter (right side) and then reaches the purge in the other three directions.

  For some reason, on the left side and at the bottom, I have a domain that will not color fill.  If I duplicate the image on the right page, this substantive area extends all the way at the bottom of this page, too.  It's almost as if there is something with a text wrapping or a white fill bumping into the outer edges (not the gutter and not by the top) of the page.

  For the life of me I can't figure out what it is.  I have recreated the spread, started, stopped the program.  I paused to screw up my preferences because I hate the idea to recreate.  But I have this vague memory, the last time I think than that, it was something pretty simple and does not require screw up my preferences.

  I know I'll feel stupid when the answer presents itself - whether by someone on the forum or if I remember on mine.  But of course, I do not no progress trying to figure out or work my memory.

  I have, moreover, ensure transparency, attributes and effects.  Nothing there.  I'm puzzled.  And I'm in the middle of a date limit.  Anyone who has the magic answer?  Do not hesitate to make me feel as stupid as you want

  Thank you!

  There could be a corruption in your InDesign document in this case.

  Try the following:

  1. Choose file > save as
  2. In Save As Type (Windows) or Format (Mac), select InDesign CS4 or earlier (IDML)
  3. Click Save.
  4. Then choose file > open in InDesign and go to the. You have already saved and open the IDML file.
  5. If everything seems OK, then save this file and use that one.

  CARI

• How can you fill a hollow fonts with color in Indesign

  Hello

  someone knows something about how to fill it with the color of the inside of a police dig?

  The policy in question is ROSEWOOD (rosewood - download free fonts)

  Here is a picture of the police.

  

  The white parts are actually empty hollow parts of the police...

  Any suggestion?

  OK, I found a solution... I found a version of the same font, called to FILL.  Using two layers, I was able to fill the police with police filling in the layer under.

  That being said, I still wonder if there is a way to fill the hollow fonts with colours, where a policy of filling would be unavailable...

  All suggestions welcome.

• Don't fill with color frame?

  I have an image that has a black fill to 70% compared to the nuances... but it does not show on the framework itself.

  The setting is a compound path, but even when I release it it don't fill it again with colors.

  I have the joint here. http://www.sendspace.com/Pro/DL/6zbtne

  Thank you, Tim

  The filling of the frame is set to 0% opacity in the effect controls panel.

• Problem with brush + fill (gap) in 7 & cs4 (photo attached)

  So sometimes starting yesterday every time I draw with the brush (STROKE a path), then fill with the paint COP there is always a gap between the filling and the brush. What happens in 7 and cs4. See attached image I tried Googling this problem, but (brush, gap, fill) search terms are too generic.  I reset all the settings of photoshop and brushes in 7 and cs4.  I'm lost, any help is appreciated.

  in this screenshot you can see the gap between the brush and the filling, but there is no difference with a marquee of filling.

  

  The problem is caused by the semi-transparent pixels created by either antialiasing inherent in almost all brushes or the fringes caused by hardness slider. If you are painting on a layer without transparent pixels square you get this problem if the paint bucket tolerance is pretty high.

• to fill the gaps with value of lead and the delay and make average and the gap between earned

  Thanks in advance
  
  I have table as below

  ID          TYPE     NUM     NAME     BEG_MP     END_MP     VALUE
  10001103N     3     1190001     WST     0.000     0.220     
  10001103N     3     1190002     WST     0.220     0.440     
  10001103N     3     1190003     WST     0.440     0.820     12800
  10001103N     3     1190003     WST     0.820     1.180     12800
  10001103N     3     1190004     WST     1.180     1.220     
  10001103N     3     1190004     WST     1.220     1.300     
  10001103N     3     1190005     WST     1.300     1.420     14800
  10001103N     3     1190005     WST     1.420     1.550     14800
  10001103N     3     1190006     WST     1.550     2.030     
  10001103N     3     1190006     WST     2.030     2.660     
  10001103N     3     1190007     WST     2.660     2.780     

  What I need is to fill the gaps with value of lead and the delay and make average and the gap between the values
  

  ID          TYPE     NUM     NAME     BEG_MP     END_MP     VALUE
  10001103N     3     1190001     WST     0.000     0.220     12800 ---> Lag value
  10001103N     3     1190002     WST     0.220     0.440     12800 ---> Lag Value
  10001103N     3     1190003     WST     0.440     0.820     12800
  10001103N     3     1190003     WST     0.820     1.180     12800
  10001103N     3     1190004     WST     1.180     1.220     13800 ---> Avg(12800,14800)
  10001103N     3     1190004     WST     1.220     1.300     13800 ---> Avg(12800,14800)
  10001103N     3     1190005     WST     1.300     1.420     14800
  10001103N     3     1190005     WST     1.420     1.550     14800
  10001103N     3     1190006     WST     1.550     2.030     14800 ---> Lead Value
  10001103N     3     1190006     WST     2.030     2.660     14800 ---> Lead Value
  10001103N     3     1190007     WST     2.660     2.780     14800 ---> Lead Value

  create table AVG_TABLE
  (
    ID     VARCHAR2(20),
    TYPE   NUMBER,
    NUM    NUMBER,
    NAME   VARCHAR2(10),
    VALUE  NUMBER,
    BEG_MP NUMBER(6,3),
    END_MP NUMBER(6,3)
  )
  ;
  
  insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
  values ('10001103N', 3, 1190001, 'WST', null, 0, .22);
  insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
  values ('10001103N', 3, 1190002, 'WST', null, .22, .44);
  insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
  values ('10001103N', 3, 1190003, 'WST', 12800, .44, .82);
  insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
  values ('10001103N', 3, 1190003, 'WST', 12800, .82, 1.18);
  insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
  values ('10001103N', 3, 1190004, 'WST', null, 1.18, 1.22);
  insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
  values ('10001103N', 3, 1190004, 'WST', null, 1.22, 1.3);
  insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
  values ('10001103N', 3, 1190005, 'WST', 14800, 1.3, 1.42);
  insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
  values ('10001103N', 3, 1190005, 'WST', 14800, 1.42, 1.55);
  insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
  values ('10001103N', 3, 1190006, 'WST', null, 1.55, 2.03);
  insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
  values ('10001103N', 3, 1190006, 'WST', null, 2.03, 2.66);
  insert into AVG_TABLE (ID, TYPE, NUM, NAME, VALUE, BEG_MP, END_MP)
  values ('10001103N', 3, 1190007, 'WST', null, 2.66, 2.78);
  commit;

  Hello

  Use LEAD and LAG when you know exactly how far is the target line (for example, if you know the desired value is on the next row).
  If you don't know exactly how far is the target line, then FIRST_VALUE and LAST_VALUE are more likely to be useful.

  WITH     got_neighbors     AS
  (
       SELECT     avg_table.*
       ,     LAST_VALUE (value IGNORE NULLS) OVER (ORDER BY beg_mp)          AS prev_value
       ,     LAST_VALUE (value IGNORE NULLS) OVER (ORDER BY beg_mp DESC)     AS next_value
       FROM     avg_table
  )
  SELECT       id, type, num, name, beg_mp, end_mp
  ,       COALESCE ( value
               , ( NVL (prev_value, next_value)
                 + NVL (next_value, prev_value)
                 ) / 2
               )     AS value
  FROM       got_neighbors
  ORDER BY  beg_mp to f
  ;
  

  Riedelme is correct: LAG LEAD (as well as FIRST_VALUE and LAST_VALUE) can return only the values that are there (or that you give as default values). This means that you can not solve this problem with these functions alone; you need something else (as NVL, above) to provide value when the function does not find it.

• Color fill problems

  Is anyone else having problems with the fill color of the cells?  Once I have fill a cell, I often can't change.  It is super glitchy.  It will allow me to change the color maybe once out of ten, or perhaps when I close and re-open the page... or maybe not at all. Curious to know if this is a bug known or just my bad luck.  Thank you!

  -BH

  Hi the Heeler border,

  How do you try to change your fillings? What Version of numbers do you run?

  I remember that in the past the Palace of color would work not all means the way I expected. I think I've changed my ways and I think that numbers can also work a little differently. I'm under 3.6.1 numbers in El Capitan.

  When I click in a cell to change the fill, if the color palate is open it is not related to the filling of this cell, even if it displays the same color. I need to reopen the mouth with the selected cell, or choose one of the colors in the Palace of popup.

  

  Quinn

• Change the color of cell based on the text in another cell.

  Hey everybody, hoping that I can get some advice. I searched autour and finds only advice exceeded on a previous version of a number.

  I use 3 numbers

  

  Very simple question, in the hope of a simple answer

  Above is what I want the result to be.

  The "Number" column is a pop-up menu with a list of different text. I wish that the color of cell status change depending on which element is selected.

  I looked in the conditional highlighting, but it doesn't seem to be what I'm after. I would be able to get this working with formulas or a mixture of both?

  Thanks in advance for your help.

  Hi .adams,

  I do not understand the cells that you compare to get a color. It is a cell in the left column or a cell in the right column?

  Please tell us your overall goal: 'what' you want to do, rather than "how" to achieve this.

  More information, will lead to a solution.

  Kind regards

  Ian.

• In the main screen blackBerry smartphones, in time, I have a small globe with a 1 next to this icon

  In the main screen, under the time, I have an icon of small globe with a 1 next to it.  It is the same size and color as the icon of the envelope for email.  What is - this and how do I clear it

  Hi and welcome to the forums!

  Please go to the button menu and message queue, view folders.

  Check each file and be sure to check WAP push and browser

  messages.

  Thank you

  Bifocals

  Don't forget to adjust your thread.

  Put the check mark in the green box containing your answer! Thank you

• CS4 Question of color fill

  Trying to paint for use on a new layer fill color, I get the message that I can't perform this action without rasterize the layer first. When I hit Cancel, it tells me "could not use the can of paint because the content of the layer is not directly editable. The problem is that I don't want pixelation. Specifically, what I want to do is create new color fill layer (say red), allows you to complete with black to create a mask by the Red transparent until with a white brush color over the paint. And, conversely, when using a black brush, red is "erased" and goes back to transparent.

  I did it in CS2 and CS3 without falling on an error. I hope it's just missing me something basic and new in CS4.

  Please let me know if I need to provide more information.

  On the fill color layer, there are two icons: one for the padding on the left and one for the mask on the right. Click on the mask. When the mask is active, it has double lines on the corners like this:

  

  Now, you will be able to fill it with black and achieve what you want.

• Captivate 8 - small gaps between objects and the end of the slide?

  Hello

  I have a selection of objects on a slide and have noticed that there is a very small gap (less than 0.1 seconds) between some of them and the end of the slide.  This applies only to certain objects. All objects are set to falter (via the timing tab) and the deficiencies mean they fade sometimes slightly different, which is really irritating.  This seems to happen even if I manually set the timings of the object (again via the timing tab) so that each object must be on the slide for exactly the right amount of time.

  Has anyone seen this problem before?  If so, is there a way to bypass?

  Thank you!

  

  

  I figured out, and now I feel very stupid!

  The problem with objects is not the tail was because I changed the zoom on the timeline, from 100 to about 80%.  Return to 100% causes the objects to align again.

  The problem with the objects fading out at the wrong time was not related and because I had accidentally changed the duration of the effect of 0.5 second to 0.1.

  Thanks for your help anyway!

• in the color fill layer is go gray instead of sellected color

  Hi, did anyone know what is happening with the color fill layer? an exclamation point appears over the top of the half, that is the new color and a block on the lower half, and when I click ok the color fill layer is always grey

  I suspect that you are in grayscale. Go to Image > Mode and change to RGB.

• Problems with gradient fill.

  Problems with gradient fill. Do not know how to choose the gradient circles between outer circles still especially when there are more than 3 colors.

  

  Hello

  It should be a little easier than trying in landscape orientation. Who help me?

  Thank you

  Ignacio