OT: How to boil water
QUESTION: How can a boil water?As I woke up this morning a glorious remains filled with dreams of adventures of swagger and triumphs of the oratory that it dawned on me that maybe about to boil water advisories guidance are in order.
I sympathize with those who may not be sure of the intricacies involved in the execution of this task, but I assure you it is not so difficult that you have been led to believe by others in this forum who seek only when monetary gain these questions.
Being the teacher reluctant and moderator of all in this forum, I enjoy myself and my knowledge to this troop under par of its inhabitants who walked through daily life, yet understand the blessing conferred to them by the access to my keen perspective and source of knowledge.
I go out of my way to explain in order to help, because surely the water where you live would require boiling to consume safely. Fear not, I do not fun or insinuate that live you in a lower area on the social totem pole which I am familiar and have flourished, a lesser and more dirty existence than me, but what about kinder, I'm just looking to help.
As the crescendo builds and develops its peak you expect my instructions, I remember the Magna Carta Libertatum (great Charter of freedoms), originally published in the year 1215. The Magna Carta required King John of England to proclaim certain rights (pertaining to the nobles and barons), to respect certain legal procedures and accept that his will could be bound by law.
I'm afraid that many of you will not understand the relevance of the Magna Carta in regards to menial tasks at hand. The shifting, restless State of water molecules as they begin the transition from liquid to steam. Trust me, even if beyond of your limited scope of reasoning, it was truth.
Don't worry, I understand the ramifications and know in my heart of hearts that you are best served by my sharing. Unfortunately, I do not know if my attempt to educate may have fallen on deaf ears. The ears of those who are so blinded in their tradition as to reject the ranting of all new to this pool. Unfortunately, I was hooked and if I whipped valiantly, I am taken to the trap.
I have indeed been attacked unceremoniously and suffered a lot.
However, for my own your self will be true, I make their way forward through the barriers you put it to me in order to remain isolated and misinformed.
Yet here, Laertes! On board, on the Board of shame!
The wind is located in the shoulder of your sail,
And you are stay was for.
There... my blessing with you!
Unfortunately, I just started what will surely be a long thread. A dangerous business for me, and I'm ready to move stealthily but the forest of your remarks. Intention in the goal and neglected far all the attackers, as my cause is just.
It's not my fault that I couldn't give you directions for boiling water, pure and simple.
It takes more than that.
A certain word building and rhyme to help those of you less in stature understand completely.
It is my duty, my vocation, to guide you.
Alas, dear friends, I have to retreat to the adventure more joyful.
Don't worry, I won't abandon you.
I promise you a final of Grand proportions, where you will receive the knowledge promised in the title of this thread. I look forward to your applause.
:-)
"Sonjay"
Using CSS for this would not document validation fails.
News:C5CFF74A.4CC45% [email protected]...
> 28/02/09 13:56, 'David Powers' wrote:
>
> Wrote:
> I don't have your PHP skills guys, so what about:
>>>
> * [water = ' boil'] {celcius:99.97; fahrenheight:212 ;}}
>>
> Yes, of course, it's the way CSS to do. However, I think that the W3C
> had to have a day off when he decided the rather
> non-conventional spelling for celsius and fahrenheit. ;-)
>
>
> And of course, the CSS is subject of presentation. Boiling water is on behavior,
> therefore javascript must be used if you wanted to validate.
Validataion and best practice are two different things.
> CSS should
> don't be used to style the appearance of boiling water.
Good point though...
Thierry
Tags: Dreamweaver
Similar Questions
-
How to save water activities such as swimming or kayaking?
How to save a water activity like swimming or kayaking in my training or activity tracker - new shows
Hello
I would not watch in water its splash proof not 100% water proof.
See you soon
Brian
-
How to test water damage/spill? Minor IdeaPad Z510 water spill
Hi all! I am a new Member, so please do not hesitate to correct and inform me of the mistakes that I can do on these forums!
Today, the water was accidentally reversed on my keyboard and trackpad. It wasn't a lot of water but not bad. Water is set on the keyboard for maybe 5 seconds until I could wipe it (following a shock what to do). The water does not go through the keys at all. I immediately turned off the computer after it.
My question is, now I'm on the laptop, all the keys and everything work properly, I don't notice any significant change in processing speed and all the ports work. How would check any damage of the waters of the oil spill? I've had this laptop ~ two months ago and certainly wouldn't return now since I have a lot work in progress. It is useful to send, how long still will take, it will be under warranty, if not how much will it cost?
Thank you for anyone who reads this, or even attempts to answer one of my questions! This community of love!
MakarovZachaev wrote:
Hi all! I am a new Member, so please do not hesitate to correct and inform me of the mistakes that I can do on these forums!
Today, the water was accidentally reversed on my keyboard and trackpad. It wasn't a lot of water but not bad. Water is set on the keyboard for maybe 5 seconds until I could wipe it (following a shock what to do). The water does not go through the keys at all. I immediately turned off the computer after it.
My question is, now I'm on the laptop, all the keys and everything work properly, I don't notice any significant change in processing speed and all the ports work. How would check any damage of the waters of the oil spill? I've had this laptop ~ two months ago and certainly wouldn't return now since I have a lot work in progress. It is useful to send, how long still will take, it will be under warranty, if not how much will it cost?
Thank you for anyone who reads this, or even attempts to answer one of my questions! This community of love!
Am I in your shoes I would be first turns upside down the unit so that the KB's down. I would then blow hot air in the keys remotely using a hair blower/dryer. After that I will begin to open the unit to check further for everything SIP of water by. Blow the additional hot air to ensure that everything is dried up. After that, I'd start checking the AC adapter and the battery according to the recommended procedure in the hardware Maintenance Manual.
-
How to remove water marks of trial version of first 14 elements
Hello
I did the first 14 elements trial version. I saved my work. Then, I bought the download. I would like to finish my work, but there the fallen on "TRIAL VERSION" water mark. How can I remove that please?
Thank you.
Bunny
Go to the folder (or folders) where your Premiere Elements project PREL or files are located and delete the folder Adobe Premiere elements preview files. Then restart the program.
If the program invites you to a link to preview the files, click the option to skip the previews.
-
How to create water ripple effect?
Hello
I tried a lot of different tutorials on how to create a ripple effect of water, similar to the picture attached to this post. However, none of them came close to what I want. Redfield offers a free plugin for Photoshop (Windows), but unfortunately, she also don't give me the same result desired thin, slight undulations.
Does anyone know a good tutorial / plugin / program that might be useful to me? Thank you!
You might want to try the plugin 'Flood' of Flaming Pear", it gives good control of the waves, ripples, etc. and will easily create what is shown in your attachment.
http://Photoshop.pluginsworld.com/plugin.php?directory=Adobe&software=Photoshop&plugin=201
-
Hello
I need to make the water from the shower, when you click on shower.
And the water should stop after 5 seconds.
The code is below.
Water flows well. But I fail to stop it.
I added a timer that starts when the shower is clicked. And must stop the flow of water after 5 seconds have elapsed.
With the lines
If (stop = true)
{
break;
trace ("Break");
}
It looks like the for loop breaks right from the start, from the first second. But not completely, somehow 1 or 2 drops are fluid.
Without these lines, nothing happens when the time is up (5 seconds click on the shower). The water just flows.
Can anyone help? How to stop water flowing after 5 seconds and cleaning of the table and stage of water drops?
Thanks in advance!
import flash.display.MovieClip;
import flash.events.Event;
import flash.utils.Timer;
import flash.events.TimerEvent;
var WatertropArray: Array = new Array();
var WaterArea01: MovieClip = new WaterArea();
var WaterBorder01: MovieClip = new WaterBorder();
var timer: Timer = new Timer (1, 5000);
var stop: Boolean;
var i: uint;
Shower.addEventListener (MouseEvent.CLICK, waterFlowStart);
function waterFlowStart(event: MouseEvent): void
{
addChild (WaterArea01);
WaterArea01.x = WaterArea00.x;
WaterArea01.y = WaterArea00.y;
WaterArea01.alpha = 0;
addChild (WaterBorder01);
WaterBorder01.x = WaterBorder00.x;
WaterBorder01.y = WaterBorder00.y;
WaterBorder01.alpha = 0;
Stop = false;
timer.addEventListener (TimerEvent.TIMER, waterFlowEnd);
Timer.Start ();
addWaterdrops();
Shower.removeEventListener (MouseEvent.CLICK, waterFlowStart);
}
function addWaterdrops(): void
{
for (var i: uint = 0; i < 100; i ++)
{
waterDrop var: MovieClip = new Waterdrop();
addChild (waterDrop);
waterDrop.x = Math.round (Math.random () * stage.stageWidth / 1.5);
waterDrop.y = Math.round (Math.random () * stage.stageHeight / 3);
waterDrop.alpha = 0;
waterDrop.rotation = - 12;
WatertropArray.push (waterDrop);
trace ("drops of water added");
moveWaterdrops();
}
}
function moveWaterdrops(): void
{
waterDrop00.addEventListener (Event.ENTER_FRAME, water flow);
}
function waterFlow(event: Event): void
{
for (var i: uint = 0; i < WatertropArray.length; i ++)
{
WatertropArray [i] there = 8;
WatertropArray [i] .x += 5;
trace (i);
If (WatertropArray [i] .hitTestObject (WaterArea01))
{
WatertropArray [i] .alpha = Math.Random ();
WatertropArray [i] .scaleX = Math.Random ();
WatertropArray [i] .scaleY = .scaleX [i] WatertropArray;
}
If (WatertropArray [i] .hitTestObject (WaterBorder01) |) WatertropArray [i] .x > stage.stageWidth | WatertropArray [i] there > stage.stageHeight / 2).
{
WatertropArray [i] .x = Math.round (Math.random () * stage.stageWidth / 1.5);
WatertropArray [i] there = Math.round (Math.random () * stage.stageHeight / 3);
. Alpha WatertropArray [i] = 0;
}
If (stop = true)
{
break;
trace ("Break");
}
}
}
function waterFlowEnd(event: TimerEvent): void
{
trace ("TIME OVER");
Stop = true;
stoppTrue();
}
function stoppTrue(): void
{
for (var i: uint = WatertropArray.length; i > WatertropArray.length; i-)
{
Remove (i);
}
}
function remove(idx: int)
{
removeChild (WatertropArray [idx]);
WatertropArray.splice (idx, 1);
trace ("removed");
removeChild (waterDrop00);
trace (i);
}
I should be an int, not a uint.
-
Hello!
My printer will not print correctly. A self image explenatory (notice how the text is wiped out; also happens when you print plain text):
What can I do? Thank you!
In the paper here troubleshooting steps can help solve the black print is not correctly on your Officejet 4636. According to your printing it seems that you have a defective black cartridge.
If the first three steps of troubleshooting documents do not resolve the problem, you can try the cleaning cartridge manually as follows: take a cup of coffee and put 1 "very hot (not boiling) water in it. Remove the black print on the printer cartridge and put nozzles in the water for about ten minutes. After soaking, remove the cartridge and blot dry electrical contacts, and then reinstall the printer and run a cycle of cleaning, and then print a test page.
-
Photosmart Plus B210a print or copy black
My B210a Photosmart more to print or copy in black mode 'Copy' or 'Print PC'. Black cartridge is almost new and has worked for 2 weeks; color cartridges are between 25% and 33% of ink left. Colors will be printed, and there is no error message. Wireless printer works from a PC with Windows Vista.
Help, please.
Hi, if the printer is on a thing of warranty that may be worth soaking the print head...
(1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
(2) remove all ink cartridges, then remove the print head Assembly.
(3) gently put the printhead nozzles down in water and soak for 5 minutes.
(4) remove the print head and gently dry the electrical contacts.
(5) replace the print head in the printer and then reinstall the ink cartridges.Can you please let me know how you go?
Thank you
Ciara
-
Printhead Photosmart Plus B209 problems
I have the printer above, just more than a year. My ink was low so I replaced it, printed the alignment page, he went up and scanned, then it went to "the installed print head is not intended for this printer, or it can be damaged.
I followed the instructions for the cleaning of the specified areas-no chance. Unplugged for 10 minutes and not turned back on - no chance. clean once more-quit.
Does anyone have a solution?
The cost of a print head?
Cost of a bat of aluminum office space?
No point wasting my money on the teleplone customer service, HP will not ship outside of US / Canada.
Thank you
Phillip
"Staring Kin Jong - it".
I thought about it! I have the same problem that everyone has this horrible impression made by HP! I took the print head and put it in a pan with boiling water. Got it out, repetition and enptied water. Boiling water erased the shit that gets stuck in this defective product. After put back, ran a printhead clean and everything was perfect again. Black ink was printing. Please spread the word! There are forums everywhere on this printer. Please tell everyone how to fix it!
IT's FIXED!
-
DeskJet F4480: full black print cartridge still does not print black. Colors OK.
What the title says. All of a sudden my Deskjet F4480 does not print black. All cartridges are almost nine (changed recently, bought at Staples). Colour printing is OK. Print a page with black text and results in only the images printing color images. I only went through all the steps of cleaning cartridge several times, no difference. There is no error message, just black not appear do not at all.
And... Here is the solution.
Funny how I found an explanation of the problem and how to fix it on a different printer manufacturer's Web site, but not on HP... But I digress.
The black cartridge has been blocked. The way of difficulty is:
1. remove the faulty cartridge from the printer.
2. place a small amount of boiling water in a cup (about 1/4 in.) and dunk of the print head (the part where the ink comes out) in warm water for a minute. Do not immerse the entire cartridge in hot water, just the print head.
3 take it out, pat against a paper towel, observe the model ink left in the cartridge on the towel. If too little / interrupted, dunk again in hot water for another minute, pat again. You want to get an unbroken line of ink through the length of the print head. Repeat as needed (I did 4 times total).
4 cartridge Pat dry everywhere, put it back in the printer, run cleaning cycles (1 - 2).
5. If still not good fixed, take out the cartridge and repeat 2 (I had to do it again).
You will lose little ink, cartridge of bad and good a well (you can not run cycles with only 1 cleaning cartridge), but at least you won't have to throw a nearly full cartridge.
-
My otherwise perfect deskjet 3325 has been standing idle for a few months.
I am now in a situation where I have TO use it again.
Apparently, there is ink in the cartridges, BUT the paper comes out of the Virgin, even after several CLEANING operations.
HOW?
Hans Bonnesen
Birkebakken 25
3460 Birkerød
Try to remove the cartridges and soaking them for 10 minutes with the nozzles immersed in about 1 "of very hot (but not boiling) water. After soaking, remove the cartridges and dry smooth contacts with a material free of fluff as a clean coffee filter.
Once the cartridges are delivered to the printer, the cleaning cycle was performed three times. If there are signs of black or color, then you can be the successful performs cleanup plus three cycles. If, after the first three cycles of cleaning there is still no trace of the printing press, then probably the cartridges don't were not properly parked when the power has been removed and you will need fresh cartridges. This printer has integrated in the ink cartridges and if necessary print heads cartridges get the printer operation, assuming that it was working very well before their storage.
-
My Officejet 7000 Wide Format has stopped printing black. I replaced the cartridge, cleaned the heads, aligned the cartridges but nothing. Nothing prints in black, but all my controls HP tell me that everything is fine. Help, please. I really love this printer and got lost in my work without him.
Okay, it looks like you have tried the usual troubleshooting as described here
If the printer is out of warranty, something that could be useful to fire suddenly is remove the printhead & soaking as described by Bob in the post below.
(1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
(2) remove all ink cartridges, then remove the print head Assembly.
(3) gently put the printhead nozzles down in water and soak for 5 minutes.
(4) remove the print head and gently dry the electrical contacts.
(5) replace the print head in the printer and then reinstall the ink cartridges.Can you let me know how you get on?
Thank you
Ciara
-
new black cartridge does not work. I have no error message, simply, it does not print in black.
As noted above, the printer prints just black. It is a new cartridge. Not my first rodeo, I replaced the cartridge several times, so I don't know how to do it. I get no error message. When you check the ink level, he recorded as complete. What is happening with this?
Hi, for the Olympic GAMES of 6500 try the procedure described in the link below...
http://support.HP.com/us-en/document/c01641815
Otherwise, if the printer is out of warranty, one thing that might be worth a shot is to soak the printhead...
(1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
(2) remove all ink cartridges, then remove the print head Assembly.
(3) gently put the printhead nozzles down in water and soak for 5 minutes.
(4) remove the print head and gently dry the electrical contacts.
(5) replace the print head in the printer and then reinstall the ink cartridges. -
Hello
I have the HP Photosmart C5380 all-in-One printer. It has 2 black cartridge connectors, one that looks like a bow tie on the left and the Pentagon to the extreme right.
Yesterday, I bought a photosmart HP 364 black ink for black ink cartridge slot "bowtie" and buy ink HP 364 black for the Pentagon slot. However, im trying to documents printer containing the text in black only and pages appear blank?
I tried to use HP scan doctor, but said everything is working properly.
I really don't know what could be the problem.
Thanks in advance,
Alex
OK, so if it's out of warranty one thing you can try is soaking from head of printing, such as recommended by Bob...
(1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
(2) remove all ink cartridges, then remove the print head Assembly.
(3) gently put the printhead nozzles down in water and soak for 5 minutes.
(4) remove the print head and gently dry the electrical contacts.
(5) replace the print head in the printer and then reinstall the ink cartridges.Please let me know how you go Alex
Cheers, Ciara
-
HP 3510: HP 3510 is not printing black ink
My HP 3510 print is out of black ink. I went through the troubleshooting guide and called the 1-800 number, but they ask for me to pay for the support. Even new ink cartriages do not work. All solutions?
I dipped the printer heads in boiling water for 20 seconds and dry them on paper absorbing by a youtube video. Took me days just to find a solution. Works perfectly now. Simple.
Maybe you are looking for
-
Battery and general order questions for the MacBook Pro 13 inch retina (2015)
I just bought a MacBook Pro of the retina (100% Brand new) as my first product Mac and I love it! I want to keep this laptop for as long as I can especially for the price I paid for it. Battery is my number one concern, and I want to keep the health
-
Dell Latitude 2120: Missing driver (PC1 Device) for windows 7, 32 bit
Hello, I would like to know if anyone can help me. Through the printers and devices section, I have a yellow warning mark that appears next to the icon of Dell computer. After having crossed the troubble search shooting, it came up saying: The PCI de
-
[IdeaPad Y510] Compatible Wake On Lan?
Hello I'd like to wake up my laptop with Wake On Lan, but I did not find the settings "Enabled Wake On lan in the bios". How can he do? Thank you ------------------------------- I'm sorry, I'm French, I speak very well English
-
everything about will print but gives the warning message that it cannot scan, copies or faxes
The all-in-one printer is only a month after the warranty and has suddenly stopped working. It can print but when trying to now the scanner displays a message warning saying that it cannot scan copies or faxes. Can anyone help? I don't want to pay th
-
HP 250 G3: Button brightness problems
Hello! I'we had some problems with my button for brightness. When I press the brightness button down, it will be brighter. And even with the other button for brightness. Is a hardware or software problem? Please help, it's very annoying.