Other users cannot access the Internet
Tags: Dell Products
Similar Questions
-
Original title: I have two users on Vista. We get to the top with windows can not access the specified device path.etc. The other has no problem
The second user cannot access the internet. Can't access window appears. The other user is not problems.
Hi Rickravel,
1. what type of account you use?
2. This only happens when you access Internet?
3. when the problem started?
4. you remember to make changes to the computer before this problem?
Step 1:
You can start in safe mode with network and see if the problem occurs in the account.
You can see the following link to start in safe mode with network.
Start your computer in safe mode
Note: Restart the computer to boot into normal mode.
Step 2:
If you use Internet explorer, then you can try to disable add ons and check if it helps:
Run Internet explorer with no Add - ons. Steps to open Internet with no mode of modules:
a. click on start
(b) in the search box, type in Internet explore
c. Select Internet (no add-on mode)
If you were able to access the Web site without any problems, then the module may cause the error.
You can read the following article and try the steps to activate the modules individually determine which Add - ons may be the cause of the problem.
How the modules of the browser affect my computer?
Hope this information is useful.
-
Remote user cannot access the internet
Hello
I have a problem with my remote vpn users. They can't access internet after they establish the vpn connection. I read on the split tunnel and I think that its set up right, but his does not.
Please if you have time take a look. I have attached my asa 5505 configuration
Best regards.
your split tunneling is configured correctly, but group policy in which will done this configuration is not applied to the tunnel-group:
tunnel-group monitoring_vpn_group General-attributes
Group Policy - by default-monitoring_vpn_policy
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni -
I am able to access the web pages, but other programs cannot access the internet.
This problem started a few days ago. It is not my router. If I try to go in the network and sharing Center it just freezes. I have absolutely no idea how to fix this.
Try a system restore to a Date before the problem began:
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
-
Hello
My problem is my WiFi says its connected but I can't browse or access the internet.it just tells me "unable to connect to internet computer is not connected to the internet", but my wifi says 'connected'.i tried to go to the cmd prompt and typed in "netsh int ip reset resetlog.txt c:\" goal it shows me "reset failed.access is denied .he don't s no user specified settings to be reset to zero." please "» What can I do?
Thanks in advance.
Hello @jerome256,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.
I understand that you are having a problem with your WiFi and wanted to help you!
You are trying to access WiFi through router? If you are connected to your wireless network, but cannot access the internet, then the problem may be with the router. Check that the router is connected to the internet. If you have more than one router, then you can ensure that you are connected to the correct router. You can also try unplugging the router for about 30 seconds, and then reconnecting it. Please consult the following document, as it can help solve the problem for you:
HP PC - Troubleshooting wireless network and Internet (Windows 10)
Please let me know if this information has been helpful by clicking the thumbs up below.
Have a great day!
-
Cannot access the internet on a network Windows XP when Windows 7 goes to sleep
Original title: Windows 7 Windows XP network problem.
I replaced a Windows XP computer on my node 4 (2 PC, printer 2) cable network with a Windows 7 computer. When the Windows 7 computer in mode 'sleep' the other (XP) computer cannot access the internet. A message appears that there are 2 computers with the same IP address. If I wake the computer 7 fine. That is what it is? I agree not all files between the computers.
Hello
It is usually the case when, for example, a router is off, but one or more of the devices connected to the router are left on.
The devices to retain the ip address assigned to them, but when the router starts up again it has no knowledge of this. If when you start one of the other devices, the router can assign an ip address already in use. Concrete example that I reproduced with my router and the PC...
- Start the router, then boot PC1 and PC2 - the router (192.168.1.1) will allocate for PC1 192.168.1.2 and 192.168.1.3 to PC2
- Turn off the router, then turn off PC2, restart and shut off again
- Put the PC1 to sleep
- Start the router and PC2, the router does not PC1 and allocate 192.168.1.2 to PC2
- PC1 to wake up and there still 192.168.1.2 who now is a confrontation with PC2
Other ways to reproduce this situation may also be possible.
All devices on your network must have a unique ip address, where the warning message.
If you get this situation once again, the solution is to turn off all devices, including the router, then restart the router, then restart all devices connected to the router.
To avoid this, you may be able to put ip Reservations for your router address which will ensure that all devices connected to the router always get the same ip address (unique). If you are unsure how to proceed, we will need your router brand and model to help.
Tricky
-
XP Home only 2 users can access the internet
I have a laptop Dell Inspiron 1300 Windows XP sp3. I'm the only user for a few years until I've added my son as a different user (with administrator privileges).
I have been using a USB WiFi dongle with success.However when my son connects, it cannot access the internet - not even with a link of ethernet wired router to wide band.I can ping sites like yahoo.com, but not access via a browser.Help, pleaseThank youDavid E.Hi David,
1. what browser do you use to visit Web sites?
2. If you are using Internet Explorer, then what is the version?
3. What is the error message when you access a Web site?
4. what security software is installed on the computer?
I suggest you try the following steps if you use Internet Explorer to browse.
Method 1: How to reset Internet Explorer settings
http://support.Microsoft.com/kb/923737
Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
Check if the problem persists.
Method 2: Create a new user account
The user account may be damaged and because who you may not have access to the Internet. I suggest to create a new account and check.
To add a new user to the computer
If the problem does not occur in the new user account, and then transfer the data from the old account to the new account.
How to copy data from a corrupted to a new profile in Windows XP user profile
http://support.Microsoft.com/kb/811151
Let us know the results.
-
I have Vista Home Premium and trying to connect to a WiFi spot, I get the message "linked to limited accessibility" and I cannot access the internet. I understand this is common for Vista and there is a fix for this problem, but want to make sure that I get the right one and can't seem to find anything referring to this issue on the Microsoft site
Hello
This problem happens only when connecting to a particular place for the WiFi?
You can follow the suggestions and check out them.
Method 1
You can read the article.
Message when a device on a Windows Vista-based computer uses a network bridge to access the network: "connected with limited access".
http://support.Microsoft.com/kb/930517
Method 2
Disable IPv6.
Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
NOTE: You should do this for each network connection.
Method 3
Temporary disable your security software.
Disable the antivirus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Enable or disable Windows Firewall
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
Note: Software antivirus and firewall can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attack.
Method 4
You can reset the TCP/IP stack.
How to reset the Protocol Internet (TCP/IP)
-
internal hosts cannot access the internet w / L2L configured tunnel
The internal hosts behind the ASA cannot access the internet with a configured tunnel to L2L. The L2L tunnel is mounted and passing traffic correctly. However, the internal host cannot access the internet through the ASA. I think I have my NAT watered somewhere. I can't even a host statically mapped to the internet. It might be because I'm used to having a WAN IP to the external interface which differs by the CIDR block assigned by the ISP. In this case, it's all together, with the ASA outside interface occupying the first available address.
We have been assigned a CIDR range x.x.x.64/28. x.x.x.65 is my front door and my first usable est.68, by the PSI (I guess what they utilisent.66 et.67 for internal use). External interface of the ASA est.68 and I'm trying to get NAT others. I'm Polo all DHCP clients internal and have some static entries as well. Below is the relevant NAT config. Yet once, all traffic passes above the tunnel properly, but not from inside to outside. If more information is needed, please advise.
interface outside
IP address x.x.x.68 255.255.255.240
NAT-control
Global x.x.x.69 - x.x.x.77 2 (outdoor)
Global 1 x.x.x.78 (outside)
NAT (inside) 0 access-list sheep
NAT (inside) 1 10.10.10.0 255.255.255.0
public static x.x.x.69 (inside, outside) STATIC_NAT_EXAMPLE netmask 255.255.255.255
internal access-group interface inside
Route outside 0.0.0.0 0.0.0.0 x.x.x.65 1
internal to the 10.10.10.0 ip access list allow 255.255.255.0 any
! Remote LAN is 192.168.10.0/24
access-list sheep extended ip 10.10.10.0 allow 255.255.255.0 192.168.10.0 255.255.255.0
Can you post a "show sysopt run?
Try this command to enable proxy arp.
No outside sysopt noproxyarp
-
cannot access the internet after upgrading to firefox 30.0 on windows 7
After the upgrade to firefox 30.0 on windows 7, cannot access the internet. FF 30.0 works OK under Vista
Sometimes it's because of your security software thinking that the upgrade may not be legitimate. You can consult this article: problems connecting to websites after Firefox update.
-
Broadband went down for several days but was back on property that still cannot access the internet
Went away for two weeks and return to find internet and landline phone at the bottom, contacted bt which were going out but it all came back to the top, light on bnroadband but still cannot access the internet! Any answers please...
Contact your ISP to solve problems.
-
I have 2 laptops and one desktop. Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help. I use Windows XP
Hi JessaRoy,
· The computer connected to the network or are they computer autonomous?
· What is the number and the model of the computer?
· What is the service pack installed don the computer?
· What is the full error message with the error code, that's all?
· What are the steps you tried to solve the problem?
Try the steps from the link below: to test TCP/IP connections by using the ping and the commands net view: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true
With regard to:
Samhrutha G S - Microsoft technical support.
-
I am faced with a kind of strange and unusual error. in my office, the internet is accessible with the proxy server. without him we cannot access the internet. However, there is a laptop computer on which some time the internet is accessible only when I leave the proxyserver only on that machine... any idea?
Hello
Work on a domain environment?
Changing the proxy settings is something that you usually only have to do if you connect to the Internet via a corporate network. By default, Internet Explorer automatically detects proxy settings. However, you may need to manually set a proxy with information supplied by your network administrator.
If you are on a domain environment then please post the question on the link mentioned below using:
http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads -
cannot access the internet from the desktop
I am able to access the internet through the application of start page, but cannot access the internet from the desktop page. The convenience store has not detected a problem. Does not work via Wifi or wired broadband direct.
Hello
Are you using the right Internet Explorer?
There are two more separate... From the start screen and another completely different for the office.
-
Hi, I need Installer back CC Adobe (photoshop, lightroom, bridge). One of my mac cannot access the internet.
Is there a link for an installer for them offline?
I found that this is a link to the forum discussions " http://trials3.adobe.com/AdobeProducts/PHSP/16/osx10/Photoshop_16_LS20.dmg?PID=2159997 " ' but it does'nt works for me. "
It is said
Access denied
You do not have permission to access to " " http://trials3.Adobe.com/AdobeProducts/PHSP/16/OSX10/Photoshop_16_LS20.dmg ? "on this server.
Reference #18.cd72afc3.1450863956.3ab05b71
N ° 1)
Click on the link below and 6 CS download page opens, DO NOT download anything from there, just keep it open
https://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html
If we do not keep CS 6 page open, you will get the access denied error.
Step 2)
Click on the link below:
http://trials3.Adobe.com/AdobeProducts/PHSP/16/OSX10/Photoshop_16_LS20.dmg
Maybe you are looking for
-
How to find out what the police are actually using Firefox?
How to find out what the police are actually using Firefox?Inspect the element don't say what substitute fonts.
-
Pavilion 15: admin or power on password
Admin or power on password, code 67607610 help thank you
-
Need help with closing Hotmail account
Hello world... Im trying to close my account but now I get this error. One or more paid services or a Microsoft Points account is linked to your account. To close this account, make sure each service is canceled and your Microsoft Points account is c
-
What happens if you install a fix it, that was not necessary?
for example, I tried to fix it he 50123 for Windows .NET Framework But then discovered that the fix was NOT necessary, While running that set when there is no computer mess?
-
There is no beep when connected to USB port
everything else works