There is no beep when connected to USB port

Similar Questions

• Help! My Sansa Clip + is no longer recognized by my PC when connected by USB port!

  Reading, the latter time, ' said, 'written' only when connected. Normally, he alternates between the 'Reading' and 'Writing' when it is connected to the PC and, therefore, it USED TO BE recognized by the PC in these conditions. The device is not recognized in Windows Explorer as a device or disk as usual. I use Windows 7. The device is not recognized by Windows Media Player synchronization purposes: I can't synchronize playlists of music more.

  You try to reset by pressing the power button / stop 20 seconds does not help.

  Using different USB ports does NOT help.

  The cable using different USB does not help.

  Another computer has NOT appeared.
  

  SOLVED BY TECH SUPPORT CHAT: Here is the conversation with the restorative troubleshooting following steps:

  Jonathan Bailey is me:

  Kyle Ahmed is the man of SanDisk tech support:
  

  
  

  Of the troubleshooting information for "not recognized by PC.
  ***************************************************************************

  Kyle Ahmed: Please tell me the exact model, color, and the ability of your Sansa player?
  Jonathan Bailey: black, Sansa Clip +.
  Kyle Ahmed: Please provide me with the ability as well?
  Jonathan Bailey: I think it's a 4 GB
  Kyle Ahmed: Please tell me when and where did you buy this drive?
  Jonathan Bailey: Citrus Heights, CA, Jan 2012 target
  Kyle Ahmed: If I understood you correctly, your drive is not getting recognized by the computer?
  Jonathan Bailey: No, it is not when connected by USB.
  Kyle Ahmed: Please tell me, are you using Windows 7?
  Jonathan Bailey: Windows 7
  Kyle Ahmed: I understand. Please connect the player to the computer.
  Jonathan Bailey: It should say READING and WRITING.
  Kyle Ahmed: very well. If you please, right click on computer and select manage.
  Kyle Ahmed: Click Device Manager in the left pane.
  Kyle Ahmed: Sansa player will be displayed in the right-hand of Device Manager: 1. USB mass storage device
  (if the player has MSC) 2. portable (if the player is set to MTP mode)
  Jonathan Bailey: he is profiled as a Portable device Sansa Clip + 4 GB
  Jonathan Bailey: a yellow exclamation point icon
  Kyle Ahmed: right click on the drive with the error indicator and choose uninstall.
  Jonathan Bailey: icon done, went
  Kyle Ahmed: In the top menu, click Action, and then select search the hardware changes.
  Jonathan Bailey: said device still WRITTEN in reading
  Jonathan Bailey: said ball driver software not properly installed
  Kyle Ahmed: very well. Please disconnect the player from the computer.
  Jonathan Bailey: ok, says still WROTE
  Kyle Ahmed: Please press on and press and hold power for 20 seconds to turn it off.
  Kyle Ahmed: Then, press and hold the Center button while connecting the device to the computer.
  Kyle Ahmed: It is on the first view the drive between the up/down/left/right button.
  Kyle Ahmed: This allows the computer to recognize the drive as a removable storage as well
  You should see it in the devices with removable storage section in the computer.
  Jonathan Bailey: it says CONNECTED then he says SAN Disk alternately
  Kyle Ahmed: Check if the drive is recognized by the computer.
  Jonathan Bailey: there is now a SANSA CLIPP (F): in my Windows Explorer navigation pane
  Kyle Ahmed: It seems that pilots of the PSG of your computer went corrupt due to which your
  Player is recognized not earlier. In this case, what you have to do is to reinstall Windows Media Player or
  change the USB mode of the player to MSC permanently solve the problem. But the MSC mode will not allow you
  by creating playlists with Windows Media player to transfer songs from your player.
  Jonathan Bailey: Windows Media Player Sync now recognizes "SANSA CLIPP"
  Jonathan Bailey: I need Windows Media Player synchronization capability or the Sansa is not good for me.
  Kyle Ahmed: Jonathan, please check if the player is displayed under the Portable devices or with
  Removable storage in the computer (Explorer)?
  Jonathan Bailey: It's showing under devices with removable storage in the computer (explore).
  Kyle Ahmed: Please disconnect the player from the computer.
  KKyle Ahmed: Please activate the drive.
  Kyle Ahmed: Then go to settings > system settings > USB mode.
  Kyle Ahmed: Then in the player's main menu, go to settings > system settings > USB mode.
  Kyle Ahmed: PSG and click the Center button to confirm.
  Kyle Ahmed: very well. Now, connect the drive to the computer and check if she gets recognized or not.
  Jonathan Bailey: OK now recognized as his former self again.
  Kyle Ahmed: If the player is now recognized and alos appear in Windows Media player, I'm wrong?
  Jonathan Bailey: I have not checked the media player yet
  Jonathan Bailey: it is recognized in Explorer
  Kyle Ahmed: Please disconnect the player from the computer.
  Kyle Ahmed: To check the version of the Firmware of the player.
  Jonathan Bailey: ok, it says REFRESHING YOUR MEDIA
  Kyle Ahmed: very well. I would like to know once you are in the main menu of the player.
  Kyle Ahmed: Go to settings > system settings > Info.
  Kyle Ahmed: Give Me the version of the firmware of the drive please.
  Jonathan Bailey: Version V01.02.16A, isn't it?
  Kyle Ahmed: It seems that the version is up-to-date.
  Kyle Ahmed: The reason why it took more time to update the media earlier must be because of the large amount
  songs that have been transferred, which can take the time to read.
  Jonathan Bailey: OK, for 2 500 songs, it usually takes about 15-20 minutes
  Kyle Ahmed: I understand.
  Kyle Ahmed: You have faced a temporary problem that was solved by resetting the player and refreshing the drivers of your computer.
  Kyle Ahmed: You should not face additional problems.

• D1370 "Scan type not the Remote Scan value... "Why this error when connected via USB

  Printer D1370 MF w / usb on win7 x 64 machine connection.

  I understand that when networked, I owe to the printer and manually press , then then before you scan using the software MF Toolbox on my PC and then must go to the printer once the scan is complete and cancel this setting manually before I can print or use other functions. What is total pain BTW...

  However, I also have a MF6530 and can scan directly from MF Toolbox without manually change the setting of the printer when connected via USB.

  So, I would like to connect one of my PC via USB for scanning to eliminate the requirement to manually configure the printer for the mode. But, when I do this I always get the error "type of analysis is not defined for [Remote scanner] on the device" even though I am connected via usb.

  1. I do something wrong when I try to scan via a usb connection that causes the error "remote scanner?

  2. that this has something to do with D1370 being a network printer. My MF6530 isn't a network printer.

  3 is there a manual for the software MF Toolbox? The manual on the installation disc is for 'Send email' and 'Store to Shared Folder. The manuals provided in the box do not address MF Toolbox. There must be a detailed operating manual provided by Canon for this program?

  4. What is the error Code 162,0,0?

  5. where is the complete list of the error codes for MF Toolbox.

  6 help!

  Hi monza.

  I know that this issue is frustrating and I'll be happy to help you.

  The new imageCLASS machines are designed so that you can select an option to scan the machine.  There is no way to set a default scan on this computer option.  You will need to select [Remote scanner] or [computer].  This is to ensure that your device correctly handles the scan project.  For this reason, the ability to program a specific mode is not available.

  Although an extra step to make, an advantage to choose the mode desired for a respective scanning can ensure that poor communication of scanner does not occur if it was programmed to a different mode.

  The 162,0,0, the error indicates the Toolbox does not detect the scanner mode "Remote Scanner.  Scanning is not supported with a connection on the USB hub, as the hubs can cause communication problems, trying to transmit data to the computer.  We recommend a direct connect between the printer and the computer.  Once you have connected the printer directly, perform the following steps and check if you receive the same error 162,0,0:

  1. Check that the MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
  2. Select [Remote scanner], then press [OK].  The display reads, "remote scanner. Waiting in line... ».
  3. On the computer, open the MF Toolbox and select [PDF].
  4. Click the [START] button green on the window [PDF].  The machine begins to deal with the scan.

  Then I recommend to download and install the e-manual for the device to your computer.  It gives very detailed instructions on each of the functions of the machine.  The e-manual should be included in the manual on CD-ROM supplied with the machine.  If you are unable to access it from there, please click the link below to download the electronic Handbook:

  imageCLASS D1370 - Brochures & manuals

  I hope this information is useful for you.  However, if you need more assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• BlackBerry Smartphones phone hangs when connected via USB

  Hi I have a Pearl 8120. There is a problem where the phone will break if I connect it to some PC via USB.

  When I say that it blocks the screen turns off and the red light stays on. To recover from this point, I have to unplug and reinsert the battery.

  But for example if I connect it while the PC is not started in Windows so it will not crash.

  When I connect the phone via a charger cable is also very good, and never, it hangs on my own PC at home.

  Is there a way to fix this?

  Hi, it seems that too much effort for reload software blackberry at this stage.

  Although I solved the problem by changing the option "Auto enable mass Storage Mode when connected" guest.

• BlackBerry smartphones can not sync - device blocks when connect to usb

  Help!  Cannot connect my curve on my desk.  When I connect with usb, the device stops and does not connect to Desktop Manager.  Support of Sprint and blackberry are no help and tell me it's the computer.  I have followed all directions on the support site bloackberry for a clean uninstall of Office Automation, including deleting registry keys, make sure that windows is up-to-date, etc. - still not connect.  Have xp pro on this desk.  Other devices like cameras connect seamlessly via USB.  The Device Manager shows all the ports are enabled and work correctly.  Help, please.

  response to the original poster (months later):

  Finally my computer guy and I thought about it. There were two conflicts on my PC at the origin of the problem.

  First of all my photo editing software NEGLIGIBLE adoble a dot nox file nokiamanager which is in contradiction with the blackberry desktop software.

  Then the int reminders right start menu for my back up utlities for external hard drive is also in contradiction with blackberry desktop software.

• Satellite L310 - D4010 Windows XP crashes when connecting external USB HDD

  Hi friends

  I use the L310 - D4010 Windows XP machine.
  When I connect a USB external hard drive with it, it crashes. Nothing works after that.
  Please help if any similar problem with one of these in the computer toshiba laptop.

  Thanks in advance
  Joy

  Hello

  This happens with all the external USB device. for example the USB?

  You updated Win XP to the last State?

  Have you tried to connect external USB HDD to other machines with Win XP?

• BlackBerry smartphones can not see memory card when connected to USB

  At the same time whe connected to the USB port I could choose 'My Computer' and see the memory card but cannot be.  I can't see also it when it is connected to the Desktop Manager.  The device is connected and sync, but I have you will not access the memory card.  The only change I've made lately lazy tent.  It worked fine for awhile, but I deleted the application to try to recognize the card memory again.  On the BB, I can see all the photos and music on the map, the only problem is when connecting to my laptop.  I put in mass storage mode.  Any ideas?

  Cool!
  I'm glad that you fixed it.
  Please solve the thread so that others can find your answer faster.
  Thank you

  Bifocals

• Ports USB U2312HM works not when connected to USB 3

  I use a U2312HM to work, but when I plug the USB connector to a USB 3 port on my laptop, the USB 2 ports on the monitor are not recognized. Device Manager shows it as an unknown device and no drivers to install can be found. When I use a tool like slim or driveridentifier drivers it doesn't ID the device but shows not all compatible drivers.
  When I connect the monitor to the only USB 2 port, I have on my laptop that hub is USB monitor comes to life, but I'm already using this USB port for another purpose. Can anyone tell my where I can find the correct drivers?
  I'm running Windows 7 Pro SP1 on a Dell Latitude E6530, processor Intel Core i7 3770QM with 8GM ram.

  Kvwielink,

  Install this driver, restart when done, repeat the test.

  Intel USB 3.0 eXtensible Host Controller Driver
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=21129

• My new Kindle Fire HD when connected to USB causes files on my external HARD drive to go away, they come back when the Kindle is disconnected and after a reboot, any help please

  If after installation with kindle, connected external HARD drive disappears

  USB ports are usually "matched" in groups, called hubs root.  These root hubs then control and distribute the power to the USB ports.  If any device on one of the two ports, the hub root, requires too much power, the other port loses power.  When a port USB Hub root loses power, the devices connected to the port 'disappears' of the Windows session.  Normally, after you disconnect the devices from the USB port and reconnect them "must" bring these.

  A free USB powered hub can help.  These allow usually additional power over USB ports, on its own USB ports.

• Computer does not recognize the phone when connected via USB

  original title: usb recogonozation

  I want to connect my phone to my pc via the usb port but its upcoming Dungeon with an error stating that my device has mafunctioned or he stopped window. can someone pls tell me what to do? Thank you very much

  As a first step, check for compatibility with Windows 7 at http://www.microsoft.com/windows/compatibility/windows-7/en-gb/Default.aspx and on the site of the manufacturer of phone support.

• To connect to the PC - tab 8W - not seen when connected via USB - Help!

  My new 8W tab is not seen by the PC connected via USB. Both are Windows 10. Help!

  Out of curiosity I will pick up an OTG cable and let you know the result!

• Code 28 when connecting a USB drive

  Hello

  I have this problem. My PC could not install any USB drive or device such as pendrives and mobile phone. Recently, I had deleted a USB that is unusable, named "vid_1f3a_pid_efe8". I tried several solutions, but none of them work like uninstalling, updating drivers and so on. But what makes me wonder is that my external hard drive works well and no problem occurs. All other devices such as mice and others will not apply to this question.

  In the hope of finding a working solution as soon as POSSIBLE. Thanks for helping those who are willing to help.

  

  Hi Nicolas,.

  Disable and re-enable all controllers Universal Serial Bus (USB) controllers.

  USB controllers represent the USB ports in Device Manager.

  To disable and re-enable the USB controllers, follow these steps:

  (a) open the Device Manager.

  (b) expand Bus USB controllers.

  (c) Note: you may scroll through the list to find this point.

  (d) the first USB controller under Bus USB controllersright click and then click on uninstall to remove it.

  (f) repeat the steps above for each controller USB is listed under Bus USB controllers.

  (g) restart the computer. After the computer starts, Windows automatically scans the hardware changes and

  (h) reinstall all USB controllers that you uninstalled.

  Also, I suggest you install the latest drivers from the chipset manufacturer's Web site and check if that helps.

  Reference:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Re: Satellite C650 - problem with the devices connected to USB ports

  Hello

  Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?

  The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.

  The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
  Thanks in advance

  Sorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...

  Post edited by: leahhw123

  Hello

  What happens with plug n play like USB mouse device?
  You are able to use an external USB mouse correctly?

  > but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
  I guess this could be a problem with the software or drivers installed.

  I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.

  In addition, you can try to install this software once more, check whether this USB problem appears again.

• Satellite P10 crashes when using the USB port

  Hi all

  I used my Toshiba 1 year without problem. Recently, I have a problem with my USB port. As sson as I have insert any USB device. The system hangs / crashes(I have to swith it off using the power switch to reboot w/o the usb device).

  I have removed/uninstalled drivers and rebooted. The laptop recognizes the usb ports and charging drivers, but whenever I insert any USB device, the system freezes again.

  Any advice will be appreciated.

  Kind regards
  Richard

  Hello Richard

  It will be interesting to know what devices you connect to the USB ports and devices has own power supply.

  It's really not easy to say what is happening here. Perhaps some device needs a little longer to be recognized. Please let us know what devices you use.

• HP Officejet Pro 8000 A809 will not connect wo USB port

  I have a WiFi with a SSID wireless but I would like to change to a different SSID.  This requires a USB connection and my wii printer not connect to my computer with the USB cable.  I tried several cables and different USB ports,

  Acctually.  If you know the IP address of the printer, you can enter in a web page and pull the top EWS of the printer (Embeded Web Server).  From the integrated Web server, you can change all settings on the new network printer wireless.  Hope that helps.