Otos Zeiss 28 mm F1.4 lens no data at PS CC?

I got today the goal of Otos Zeiss 28 mm F1.4 and I can not found the lens in the PS CC.

Anyone know when it will be to add?

I want to use the correction to the correction of the objective data and remove the color.

9.4 ACR is current

Tags: Photoshop

Similar Questions

For the OS (SELP1650) 16-50 lens correction data

AfterShot Pro has the ability to correct lens distortions, but lacks data for the SELP1650 lens. Data should be available as my NEX 6 corrects the raw file as a jpeg with straight lines. Can I get the data somewhere? Looks like I need 3 parameters (a, b, c) to multiple focal lengths.

Any ideas?

Thanks - Mike

Yours is the most recent version of IDC. I did some tests with IDC using the same equipment you have. The option of distortion of the objective on IDC is indeed gray when you use the NEX-6 with a target of SELP1650. For further research, distortions of lens on IDC will be available if you use a lens compatible with Compensation lens with the camera.

This option is available to be used with the E-mount lenses on a NEX camera. It is not supported for other types of lenses. In addition, the LensComp. : option distortion on the camera can be set to Auto and cannot be set to Off, even with a few E-mount lenses.

If my post answered your question, please mark it as "accept as a Solution.

EOS lens Registration Tool

What is the registration of EOS lens tool?

I suspect he was part of a recent update my software of Canon. When it is enabled, it will not start and says that my XSi camera is not recognized. The EOS Utility recognizes the camera.

It is a full frame or a newer model or version of the Canon camera?

Thank you. A lot of good information here.

Canon EOS Rebel XSi

EF - S 17-55 f2.8 IS USM

EF 24-105 f4L IS

EF 85 F1, 8 USM

EF 50 f2.5 Macro

Sigma 400 f5.6

It is for the newer model cameras. It allows the lens correction data must be downloaded to the camera.

RAW image recording / lens aberration correction

My question concerns how important image recording quality when considering to use the lens correction data. Although one of the EOS Utility Manual mentions how Digital Photo Professional can solve peripheral aberrations, it refers only to color corrections only for images like the FIRST recorded. What, exactly, are the choice of good recording quality and evil, regarding their correlation with correction data that the software uses to correct aberrations?

Peripheral illumination correction simply corrects optical vignetting is inherent in many lenses. In other words, it corrects the neighbors of illumination in the whole image, where without it the corners and the edges of the picture may be a little darker than the center of the image. It is more common in the wide angle lenses.

Correction of distortion and chromatic aberrations are only applied in camera when you process RAW files in JPEG format. So, in other words, if you want them to do behind closed doors you must have the camera set to produce JPEG or RAW + JPEG for these fixes to apply.

The same corrections can be applied in post-processing of Canon Digital Photo Pro RAW conversion software. If you have corrections allowed behind closed doors, then allow the DPP software treat 'in the know', he will apply them same as if it was behind closed. Alternatively, you can manually cancel the corrections in post processing.

Many other post processing RAW conversion software can do similar. For example, Adobe Lightroom (Adobe Camera Raw) is a correction of the lens profiles built in which can be applied automatically, as well as manual controls for three types of correction. Software DXO lens correction software still seems more advanced.

If done in post-processing, the result of RAW conversion can be a file type other than 8-bit JPEG, for example 16-bit TIF or PSD, etc.. If the treatment is done behind closed doors, you can get than JPEG files.

I hope this makes sense.

***********

Alan Myers
San Jose, California, USA.
«Market softly and carry a great lens.»
MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & EXPOSUREMANAGER

Lens distortion made in camera in the NAVE - Lightroom will recognize this?

According to the title really.
On a Nikon D7000 (and other cameras) you can set it to correct the distortions of lens known behind closed doors.
If I open then such a nave in Lightroom it will recognize?
Thank you

Real lens correction data are not included in the NAVE, just file a few tags on what the goal was used.

Using these tags, software Nikon applies to the corrections Nikon version. Adobe applies to corrections Adobe version. This type of corrections are applied after that someone interprets Converts raw data into an image.

Enigma of lens metadata

Not really a problem of ACR, but I have a thorny problem in need of Smart minds and I can't imagine a better place to ask...
I have a Nikon D800 and a few lenses. I shoot RAW and send pictures on my Windows PC using Bridge. I process Raw images in the latest version of ACR & Photoshop.
Today, I noticed that for the last few weeks, bridge shows no data model to aim for my new images. Anything until the end of February is correct, but the next March 19 shooting and later just a white in the field of the lens.
However, once you load this image in ACR, it is recognized.
I even installed software from Nikon, and he agreed.
I was wondering if it was something to do with bridge being updated recently at 6.2, but I would have thought that this would affect all images, new and old. I have even a few images uploaded manually, in which case the photodownloader was at the origin of the problems - no difference.
I was wondering if the Nikon Lens Distortion data (2,009 to 2.013) firmware update caused the problem. If I could downgrade to the latest version, that could help, but I can't find the file. But anyway, cab and ViewNX have no problem, the model of the reading lens. Why it only affects bridge?
I'm puzzled. You are the cleverest people with such things, do you have any suggestions?

I found a setup.zip for ACR 9.4 and had to manually extract and rename the plugin to archive.

I'm now with ACR 9.4 and the details of the lens are back!

Prob HttpConnection BlackBerry running in the Simulator

I want to call a url and get the response of the url of my Blackberry App data. For this, I use HttpConnection. Here is the code I use:

Import net.rim.device.api.ui.container.MainScreen;
Import net.rim.device.api.ui.UiApplication;
Import net.rim.device.api.ui.component.LabelField;
Import net.rim.device.api.ui.component.Dialog;

Import javax.microedition.io.Connector;
Import javax.microedition.io.ContentConnection;
Import javax.microedition.io.HttpConnection;
import java.io.DataInputStream;
import java.io.IOException;

SerializableAttribute public class TestApp extends UiApplication {}

private screen _mainScreen;

private static TestApp _app.

public TestApp() {}
_mainScreen = new MainScreen();

TestField LabelField = new LabelField ("hello world");

_mainScreen.Add (testField);

pushScreen (_mainScreen);

C HttpConnection = null;
DataInputStream tell = null;

try {}
System.out.println("0");
c = (HttpConnection) Connector.open ("http://www.google.com");

System.out.println("1");
int rc = c.getResponseCode ();
System.out.println("2");
If (rc! = HttpConnection.HTTP_OK) {}
throw new IOException ("HTTP response code:" + rc);
}
System.out.println("3");
say = c.openDataInputStream ();
System.out.println("4");
int len = (int) c.getLength ();
If (len > 0) {}
data Byte [] = new ubyte [len];
dis.readFully (data);
} else {}
int ch;
While ((ch = dis.read ())! = - 1) {}
//...
}
}
} catch (Exception e) {}
e.printStackTrace ();
} {Finally

try {}
If (say! = null)
tell. Close();
If (c! = null)
c.Close ();
} catch (IOException e) {}
e.printStackTrace ();
}
{} catch (NullPointerException e)
e.printStackTrace ();
}
}

}

Public Shared Sub main (String [] args) {}
_APP = new TestApp();
_APP.enterEventDispatcher ();

}
}

When I try to run the code in the Simulator, I get ' 0 ', then ' 1' and after that, after much time "no trace of the stack" doesn't appear in the debug window, and as soon as the text makes its appearance, level with the text app becomes visible in the Simulator screen. There is no problem in the internet connection in the Simulator, I set up the Wi - Fi and I tested it I open any Web site in the browser. What is the problem in my code?

You must start MDS

MDS is service or bridge to connect to internet for simulater

install MDS and run it solve

Download now

Download picture of snapshot...

I'm new on java and ripe, but appreciate any help you can provide...

I is currently developing an application and you need to download an image on a server using the POST method (php server-side). I used the examples found in the documentation and the Forum and I am close but not quite there. The code runs without error, but there is no to reach the php script. I can upload an image through the browser using the same php and it's successful, so I don't think that the problem is with the php.

A couple of other keys...

-Tests on storm Simulator (4.7)

-Image (imgData) data is an array of bytes directly from VideoControl.getSnapShot (with jpeg encoding)

-The Simulator is connected to the internet via the MDS Simulator

EDIT: realized that my getResponseCode calls were prematurely flushing the output stream, if no data has been

sent, if they have been removed. However, maintaining connection expires all trying to empty or getResponseCode with

data to the output stream. The previously successful empty stream, I got a response from the php script error so I don't know

only one connection can be established on the server.

Maybe my timeout is too short... but the image is<>

My guess is that there is a mistake in my format for the message into several parts or something with the connection.

The relevant code is attached. Any help would be appreciated.

Thank you

Parks

String boundary = "---------------------------4664151417711";StreamConnection s = (StreamConnection)Connector.open("http://myserver/test.php;ConnectionTimeout=300000;deviceside=false");

HttpConnection conn = (HttpConnection)s;conn.setRequestMethod(HttpConnection.POST);

conn.setRequestProperty("Content-Type", "multipart/form-data;boundary="+boundary);conn.setRequestProperty("Content-Length", ""+String.valueOf(imgData.length));

//int responseCode = conn.getResponseCode();

ByteArrayOutputStream out = new ByteArrayOutputStream();OutputStream finalOut = conn.openOutputStream();

//responseCode = conn.getResponseCode();//if (responseCode == conn.HTTP_OK) {//     log("HTTP connection O.K.");//} else {//     log("Response Code: " + String.valueOf(responseCode));//}

String newLine = "\r\n";out.write("--".getBytes());out.write(boundary.getBytes());out.write(newLine.getBytes());String contDisp ="Content-Disposition: form-data; name=\"file\";filename=\"Image.jpg\"";String contEnc = "Content-Transfer-Encoding: binary";String type ="Content-Type: image/jpeg";out.write(contDisp.getBytes());out.write(newLine.getBytes());out.write(type.getBytes());out.write(newLine.getBytes());out.write(contEnc.getBytes());out.write(newLine.getBytes());out.write(newLine.getBytes());out.write(imgData);out.write(newLine.getBytes());out.write("--".getBytes());out.write(boundary.getBytes());out.write("--".getBytes());out.write(newLine.getBytes());finalOut.write(out.toByteArray());out.flush();//log(String.valueOf(conn.getResponseCode()));out.close();finalOut.flush();finalOut.close();

InputStream is = null;is = conn.openInputStream();

char buff = 512;int len;byte []data = new byte[buff];do{     System.out.println("READ");     len = is.read(data);

     if(len > 0){          System.out.println(new String(data, 0, len));     }}while(len>0);

System.out.println("DONE");_startPush = false;

I eventually determine that it was a problem with the MDS Simulator, I was using and not my code. At first, I used the stand-alone MDS Simulator, but once I started using the MDS packed with the individual JDE, my data began to flow.

Thanks for the suggestion, if.

Parks

ReadFully method example HttpsConnector

Hello

I'll have a bit of a dilemma with the InputStream class. The code example Blackberry 5.0 API HttpsConnector uses a method that does not seem to be implemented in InputStream, shown below:

If (len > 0) {}
data Byte [] = new ubyte [len];
int actual = is. readFully (data);
...
} else {}
int ch;
While ((ch = is.read (())! = - 1) {}
...

}
}

ReadFully method is not implemented in the class InputStream (5.0 API). Could someone shed light on this for me please?

Best,

N

I think you'll find that 'East' is in fact an instance of DataInputStream.

Phone Droid of Pix for the PPTP VPN

I tried to set up a PPTP VPN between a Droid phone and a performer 6.3.5 Pix code. As much as I can say the configuration is correct and I can open the vpn pptp fine from my laptop however the Droid refuses to connect. Here is the relevant configuration.

VPDN droid group accept dialin pptp

VPDN group droid ppp authentication pap

VPDN group droid ppp authentication chap

VPDN group droid ppp mschap authentication

VPDN droid Group client configuration address local vpnpool2

VPDN group droid pptp echo 60

VPDN group of local authentication client droid

VPDN group droid username * password *.

I turned on him debugs following:

Debug ppp negotiation

Debug ppp io

Debug ppp PAPU

Debug ppp chap

Debug ppp error

Debug ppp uauth

Debug vpdn event

Debug vpdn error

VPDN debug package

I've narrowed the problem down to the following message is displayed, but I'm not sure what this means:

PPP xmit, ifc = 0, len: 22 data: ff03c021040100120104057802060000000007020802

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: sending xGRE pak to 97.145.147.41, len 38, 18 seq, ack 8, data: 3081880b00169c450000001200000008ff03c021040100120104057802060000000007020802

Xmit Link Control Protocol pkt, action code is: Config request, len is: 11

PKT dump: 0305c2238005062affcd96

LCP option: AUTHENTICATION_TYPES, len: 5, data: c22380

LCP option: MAGIC_NUMBER, len: 6, data: 2affcd96

PPP xmit, ifc = 0, len: 19 data: ff03c0210102000f0305c2238005062affcd96

Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: sending xGRE pak to 97.145.147.41, len 35, 19 seq, ack 8, data: 3081880b00139c450000001300000008ff03c0210102000f0305c2238005062affcd96

outside PPTP: pak xGRE 69.0.0.60 Recvd, len 52799, ack 805406731

PPP rcvd, ifc = 0, pppdev: 1, len: 28, data: ff03c02101010018010405780206000000000506990009f607020802

Pkt RCVD Link Control Protocol, action code is: Config request, len is: 20

PKT dump: 010405780206000000000506990009f607020802

LCP option: Max_Rcv_Units, len: 4, data: 0578

LCP option: ASYNC_MAP, len: 6, data: 00000000

LCP option: MAGIC_NUMBER, len: 6, data: 990009f6

LCP option: PROTOCOL_HDR_COMPRESSION, len: 2, data:

LCP option: ADDRESS_CONTROL_COMPRESSION, len: 2, data:

Xmit Link Control Protocol pkt, action code is: Config Reject, len is: 14

PKT dump: 0104057802060000000007020802

LCP option: Max_Rcv_Units, len: 4, data: 0578

LCP option: ASYNC_MAP, len: 6, data: 00000000

LCP option: PROTOCOL_HDR_COMPRESSION, len: 2, data:

LCP option: ADDRESS_CONTROL_COMPRESSION, len: 2, data:

PPP xmit, ifc = 0, len: 22 data: ff03c021040100120104057802060000000007020802

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: xGRE pak to 97.145.147.41, len 38, seq 20, sending ack 9, data: 3081880b00169c450000001400000009ff03c021040100120104057802060000000007020802

PPTP: soc select returns mask rd = 0 x 8

PPTP: cc rcvdata, socket fd = 3, new_conn: 0

PPTP: socket closed, fd = 3

PPTP LNP/Cl/11/11: Session destroy

Narrow, peripheral PPP going = 1

PPTP: cc awaiting entry, max soc fd = 2

If I read that correctly, this is the Pix rejecting the configuration proposed for the Droid phone?

Any suggestion or help would be greatly appreciated.

I'm having exactly the same problem. We receive this reply with debugs on PIX 6.3

Any help would be appreciated.

PPTP: socket select return 0 fd

PPTP: cc awaiting entry, max soc fd = 3

PPTP: soc select returns mask rd = 0 x 1
PPTP: new peer fd is 4
PPTP: created tunnel, id = 23

PPTP: cc rcvdata, socket fd = 4, new_conn: 1
PPTP: cc RRs 156 bytes of data

LNP 23 PPTP: CC I have 009c00011a2b3c4d0001000001000000000000030000000300010000616e6f6e796d6f757300000000000000000000000000000000000000000000000000...
LNP 23 PPTP: CC I have SCCRQ
LNP 23 PPTP: version of the Protocol 0 x 100
LNP 23 PPTP: framing caps 0 x 3
LNP 23 PPTP: carrier caps 0 x 3
LNP 23 PPTP: max channels 1
LNP 23 PPTP: firmware rev 0 x 0
LNP 23 PPTP: hostname "anonymous."
LNP 23 PPTP: vendor «»
LNP 23 PPTP: CC O SCCRP
PPTP: cc snddata, socket fd = 4, len = 156, data: 009c00011a2b3c4d000200000100010000000003000000030000120057462d50495800000000000000000000000000000000000000000000000000000000...

PPTP: cc awaiting entry, max soc fd = 4

PPTP: soc select returns mask rd = 0 x 10

PPTP: cc rcvdata, socket fd = 4, new_conn: 0
PPTP: cc RRs 168 bytes of data

LNP 23 PPTP: CC I have 00a800011a2b3c4d00070000c111175f000003e805f5e1000000000300000003200000000000000000000000000000000000000000000000000000000000...
LNP 23 PPTP: CC I have OCRQ
LNP 23 PPTP: call id 0xc111
LNP 23 PPTP: series num 5983
LNP 23 PPTP: min bps 1000:0x3e8
LNP 23 PPTP: max bps 100000000:0x5f5e100
LNP 23 PPTP: carrier type 3
LNP 23 PPTP: framing type 3
LNP 23 PPTP: recv victory size 8192
LNP 23 PPTP: ppd 0
LNP 23 PPTP: phone len num 0
LNP 23 PPTP: phone num «»
LNP/Cl 23/21 PPTP: CC O OCRP
PPTP: cc snddata, socket fd = 4, len = 32, data: 002000011a2b3c4d000800000015c1110100000000fa00001000000000000000

PPTP: cc awaiting entry, max soc fd = 4

outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: sending xGRE pak to 70.199.49.15, len 35, seq 1, ack 0, data: 3081880b0013c1110000000100000000ff03c0210101000f0305c2238005065366bd1e
Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: xGRE pak to 70.199.49.15, len 38, sending seq 2, ack 0, data: 3081880b0016c1110000000200000000ff03c021040100120104057802060000000007020802
Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: xGRE pak to 70.199.49.15, len 35, sending seq 3, ack 0, data: 3081880b0013c1110000000300000000ff03c0210101000f0305c2238005065366bd1e
outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: xGRE pak to 70.199.49.15, len 38, sending seq 4, ack 1, data: 3081880b0016c1110000000400000001ff03c021040100120104057802060000000007020802
Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: xGRE pak to 70.199.49.15, len 35, sending seq 5, ack 1, data: 3081880b0013c1110000000500000001ff03c0210101000f0305c2238005065366bd1e
outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: xGRE pak to 70.199.49.15, len 38, sending seq 6, ack 2, data: 3081880b0016c1110000000600000002ff03c021040100120104057802060000000007020802
Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: xGRE pak to 70.199.49.15, len 35, sending seq 7, ack 2, data: 3081880b0013c1110000000700000002ff03c0210101000f0305c2238005065366bd1e
outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: xGRE pak to 70.199.49.15, len 38, sending seq 8, ack 3, data: 3081880b0016c1110000000800000003ff03c021040100120104057802060000000007020802
Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: xGRE pak to 70.199.49.15, len 35, sending seq 9, ack 3, data: 3081880b0013c1110000000900000003ff03c0210101000f0305c2238005065366bd1e
outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: sending xGRE pak to 70.199.49.15, len 38, seq 10, ack 4, data: 3081880b0016c1110000000a00000004ff03c021040100120104057802060000000007020802
outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: sending xGRE pak to 70.199.49.15, len 35, 11 seq, ack 5, data: 3081880b0013c1110000000b00000005ff03c0210102000f0305c2238005063391d9ff
Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: xGRE pak to 70.199.49.15, len 38, seq 12, sending ack 5, data: 3081880b0016c1110000000c00000005ff03c021040100120104057802060000000007020802
Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: xGRE pak to 70.199.49.15, len 35, seq 13, sending ack 5, data: 3081880b0013c1110000000d00000005ff03c0210102000f0305c2238005063391d9ff
outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: pak to 70.199.49.15, len 38, seq 14 xGRE sending ack 6, data: 3081880b0016c1110000000e00000006ff03c021040100120104057802060000000007020802
Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: xGRE pak to 70.199.49.15, len 35, seq 15, sending ack 6, data: 3081880b0013c1110000000f00000006ff03c0210102000f0305c2238005063391d9ff
outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: sending xGRE pak to 70.199.49.15, len 38, 16 seq, ack 7, data: 3081880b0016c1110000001000000007ff03c021040100120104057802060000000007020802
Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: xGRE pak to 70.199.49.15, len 35, seq 17, sending ack 7, data: 3081880b0013c1110000001100000007ff03c0210102000f0305c2238005063391d9ff
outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: sending xGRE pak to 70.199.49.15, len 38, 18 seq, ack 8, data: 3081880b0016c1110000001200000008ff03c021040100120104057802060000000007020802
Outdoors - PPTP xGRE interface: Out paket, len PPP 19

outside PPTP: sending xGRE pak to 70.199.49.15, len 35, 19 seq, ack 8, data: 3081880b0013c1110000001300000008ff03c0210102000f0305c2238005063391d9ff
outside PPTP: pak xGRE 69.0.0.60 Recvd, len 16366, ack 805406731

Outdoors - PPTP xGRE interface: Out paket, PPP len 22

outside PPTP: xGRE pak to 70.199.49.15, len 38, seq 20, sending ack 9, data: 3081880b0016c1110000001400000009ff03c021040100120104057802060000000007020802
PPTP: soc select returns mask rd = 0 x 10

PPTP: cc rcvdata, socket fd = 4, new_conn: 0
PPTP: socket closed, fd = 4

PPTP: cc awaiting entry, max soc fd = 3

Element ARRAYROLES is undefined in a CFML referenced as part of an expression structure.

Here is my code:
```
<cfif StructKeyExists(cfData.data[i], "inherited_roles") || IsArray(cfData.data[i].reader_roles)>
  <cfset arrayRoles = "reader_roles" >

  <cfif ArrayIsEmpty(cfData.data[i].inherited_roles)>
  <cfset arrayRoles = "inherited_roles" >
  </cfif>
  <cfloop index="p" from="1" to="#arrayLen(cfData.data[i].arrayRoles)#">
     
  </cfloop>
</cfif>
```
And this is the error I kept getting.
Element ARRAYROLES is undefined in a CFML referenced as part of an expression structure.
The error occurred on line 07 when I (cfData.data [i] .arrayRoles) #arrayLen #.
Any suggestion is appreciated

Well, I think I got it working now.
```
    
  
     
  
  
  
   
```
Looks like the len(cfData.data[i].reader_roles) not test if the table is empty or not. I don't know why the ArrayIsEmpty does not work in this case.

LR 6 for Sigma 150-600 contemporary profile

If I want to activate the profile correction, LR 6.1.1 does not detect my Sigma 150-600 of the contemporary lens. I have to select the manufacturer of lenses, and is then LR.
It looks like LR is looking for lens bad data, or the wrong goal data are stored in the image file.
My camera is a Canon 5 d Mark III with the latest firmware.
The goal of data displays profile list options drop-down dialog box is "Sigma 150-600mm F5-6. 3 DG OS HSM C015".
The EXIF data in the image are "150-600mm F5-6. 3 DG OS HSM | Contemporary 015 ". If I activate the Display Options display the parameters of the lens in the overlay of information, develop, this is what is displayed in LR.
Anyone know if the problem is the EXIF data, LR does not have the correct information, lens, or something else? A way to solve this problem?
Thank you.

Hi John,.

Please check the threads below.

allowing lenses correction for all THE photos during their IMPORT? -Lightroom Forums

Lightroom 6 not recognize lenses: retouching Forum: Digital Photography Review

It will be useful.

Kind regards

Mohit

My Art Sigma 50 mm 1.4 lens is recognized as a Zeiss lens!

My question is: How can I force which is default Sigma lens?

The bug has been fixed in the meantime. It has been assumed that Zeiss and Sigma use the same lens id. Adobe need to work on another method to determine the correct goal.

I got a new lens a Carl Zeiss and now in lightroom I lost resolution and all the information of the camera when I post a picture! The camera is a Sony a7R can you help me?

I got a new lens a Carl Zeiss and now in lightroom I lost resolution and all the information of the camera when I post a picture! The camera is a Sony a7R can you help me?

Look at the base this workflow

Carl Zeiss lens vs 'G '.

I've been away from Sony for many years and the view that all recent devices come with a 'G' goal instead of an objective Carl Zeiss.

Someone can give information me on the finer points / detractions of two lenses?

Thank you

Igloo

G Sony lenses are optical large opening using professional photographers, and they are exceptionally useful in low-light situations. The glass used, are of the highest quality and has minimal chromatic aberrations and distortions. Regarding lenses Carl Zeiss, they, too, offer high quality lenses and have a rich legacy of the optical design for imaging purposes.

Otos Zeiss 28 mm F1.4 lens no data at PS CC?

Similar Questions

Maybe you are looking for