OTP-S790 HDMI Audio separation issues with DVD

I bought the S790 use the double projection 3D for my Onkyo TX-SR875 HDMI is HDMI 1.3, not HDMI 1.4 compatible. HDMI 1 the S790 is directly connected to HDMI 1 input my capable 3D Panasonic PT-AE8000 projector and 2 HDMI is connected to the Onkyo receiver, including monitor output is connected to HDMI 2 of the projector for use with all other sources. Audio separation is granted on the system setup menu. I updated the version of the M13 software S790. R.0460.

When you look at Blu - ray discs, I can get the audio to work, but I have to go momentarily to input HDMI 2 of the projector (probably then the Onkyo can complete the HDMI handshake) and then I can go back to HDMI 1 of the projector entry while I have the video. Audio (usually Dolby Tru - HD or DTS - MY) remains locked and everthing is fine.

During DVD playback, and following the same procedure described above, audio (usually Dolby Digital or DTS) lock with the receiver when I switch to HDMI 2 on the projector, but when I go to 1 HDMI for the video, the receiver audio dropouts. I tried several disks such as the Lord of the rings and Spider-man.

Anyone encountered this problem or knows what could help the got? I put the menu selections include:

Control for HDMI-Off

HDMI: Connected to TV - Off

Display auto-off

Screen Saver-Off

As a matter of interest, if I enable Audio separation on 'Off' mode, I get only audio stereo, Dolby Digital not.

Any help would be appreciated. Thank you!

Hello Rick,

Try the following settings in the Blu - ray drive:

  • Set an output HDMI Deep Color as OFF.
  • Define SBM (Super Bit Mapping) as EXTINCT.
  • Set the Mix Audio BD setting as OFF.

Please mark it as "acceptable Solution" If you find this information useful.

Tags: Sony Products

Similar Questions

  • Compatibility issue with DVD Maker and Windows Media Player

    I was helping a friend with his DVD Maker and after successfully completing a DVD (music and images) using Windows Media Player music on our second attempt, he indicated that there was a compatibility problem with the music that he snatched from Media Player. He said that it would not accept the ".wma" format.  How do fix us the problem?

    I was helping a friend with his DVD Maker and after successfully completing a DVD (music and images) using Windows Media Player music on our second attempt, he indicated that there was a compatibility problem with the music that he snatched from Media Player. He said that it would not accept the ".wma" format.  How do fix us the problem?

    I'm no expert in this area, but I think that you used the wrong application, namely Windows Media Player.
    A month ago, I did 2 DVD with images and music. Here's what I did...
    Open Windows Movie Maker...
    1. I imported images in the timeline.
    2. I imported the music (wma in your case) file to Audio column / music.
    3. I have synced it so that the images and the music would start and end at the same time.
    Note : If you already have the video file with import loan, then simple music video to the timeline and go to step #4.
    4. I clicked on publish on DVD.
    Windows DVD Maker wil pop up. You know the rest of the steps.

    t-4-2

  • Split HP 13 x 2: Audio/video issues with Windows 10

    I'll start by saying that before the Windows 10 update, everything works perfectly.  After the update, I tried to watch a video on youtube and found that the video would not play properly, it would freeze and jump back more and more, and the sound was essentially just a humming noise.

    Since the problem started I tried to reset the PC, reinstall all the drivers I think (I had to do anyway after resetting the PC because there is no sound afterwards) and generally tinker with settings as far as I can find.  I discovered that this problem only occurs with microsoft browsers, doesn't happen in chrome or firefox, and the same audio problem is present with Candy Crush.  I should also say that he has no problem playing music, Pandora works great.

    Audio and video work perfectly well if I run a bluetooth speaker, but through the computer speakers or headphones, and it starts buzzing and start/stop.  Yesterday, I found that when I took off the passage of the tablet to the computer (it's a 2 in 1) audio began to work very well.  Thinking it was a problem with additional hard drive in the keyboard, I unchecked the option to activate the disc for the drive cache, allowing to solve the problem temporarily until I rebooted the computer, and now he is back not working not not and is no longer works in the mode of just Tablet even after the passage of the disk caching on for additional drive which makes very little sense to me.

    At this point, I'm completely confused.  All updates have been downloaded and applied of HP and Microsoft, I can find.  I hope someone has an answer! Thank you.

    Oddly enough, the following solution does not work a few weeks ago, but now, at least for me. Solved my problems of video playback as well.

    https://www.YouTube.com/watch?v=jWoIYi1LTPA

  • 13 d-0016nl envy: problems with the HDMI audio

    Dear Sirs,

    Due to some problems with an engineering program I had to reinstall Windows 10 on my laptop. The version of Windows is the same of the one installed on the laptop when I bought it. Before the laptop with HDMI audio installation worked fine, but then, while the HDMI video continues to work well, the audio turns off directly from the laptop, such that the cable was not connected.

    I tried to activate the 'reproduction devices' HDMI connection, but I'm not able to do this because it's as if the cable is not connected, and the HDMI connection icon appears as gray.

    I tried to update the audio driver, but it didn't work, so I tried to download and install the latest version of these drivers from the hp site but neither this worked.

    Can you help me? The laptop is quite new and I would like to solve this problem without using 2 different cables to connect also a speaker with a cable to the because the HDMI does not work as it should.

    Thanks in advance,

    Martina.

    You are the very welcome, Martina.

    It would be the graphics driver you need install the HDMI audio driver...

    This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

    http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74569.exe

  • HP ENVY laptop - 14-j153ca: HDMI Audio Driver not installed?

    I am reported a new problem associated with the HDMI port on my laptop HP ENVY - 14-j153ca I bought ~ 6 weeks ago.

    My HDMI provides the video component from my laptop when streaming from a video output on my HDTV (1080 Panasonic 42 "). But last week, the associated audio signal is not be included in the transmission to the audio control on my HD (via HDMI to the TV port). It was working properly before HDTV using the HDMI port, but now is not. HDTV works

    I do not know what sparked the question, but I checked for a driver when studying the sound card details and has not seen a driver for audio support HDMI.

    The computer works normally, and the only software change was the installation of protection software AVG antivirius on 3 February 2016 (expiry the software McAffee test supplied with the machine).

    It would be appreciated if you could help and advise what is required to fix this problem with the lack of HDMI audio during the flow of a video output on my HDTV.

    Thank you.

    Kind regards

    RWA.

    Hi there @waterbob,

    Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the HDMI. I'll be happy to help you.

    Here is a document to helpTroubleshooting HDMI screen and sound Issues.

    Please keep me informed of the progress of things.

    If you need help, let me know and I will gladly make all that I can to help you.

    Please let me know if that solves the problem by marking this post as "accept as a Solution.
    To simply say thank you, click the Thumbs up below!

    Thank you.

  • Satellite Pro A100: CD/DVD player will not play the audio CD or video DVD

    People,
    I have a Satellite Pro A100, with a RUG * a DVD-RAM UJ - 841 S Drive.
    It will read fine data disks, but refuses to play with the audio CD or video DVD.

    I tried to uninstall & Re-Installing DVD - RAM Driver;
    That got rid of the "IO error" that I received, unfortunately I don't notice the full error: S.
    He now just doesn't see the drive. Someone at - it ideas?

    I did a full windows update, and the Toshiba Diagnostic util tell me anything useful except "Fail" :(

    I found a thread in this forum that describes a similar theme:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19747&MessageID=72404

    Sometimes this error is displayed because the player does not support the environment.
    Always it is every way is supported by readers and I think that in the user manual, you will find an index CDs or DVDs compatible

    Maybe the drive is defective and can not calibrate lens in the right position.
    But this laptop is not very old, and I can't imagine that the drive is defective
    However, nothing is impossible.

    What you can do is to carefully clean the lens and see that it will help.

  • HP pavilion p6630f supports output via connector dvi - d to dvi - d to hdmi audio adapter?

    HP pavilion p6630f supports output via connector dvi - d to dvi - d to hdmi audio adapter?

    Hello

    The DVI does not support audio.  You must use a separate with the DVI cable audio cable. There are DVI cables that do not have an extra audio cable in the same sheath, but they are usually not sold in most retail stores.

    There are rumors on the net that ATI could have a special cable where some unused DVI pins were used to route the audio but that could also mean using an ATI video card. It would be a very strange configuration and not one I would recommend.

  • HP Probook T3L12UT #ABA G3 450: Audio driver issues after update of Windows 10 anniversary

    After upgrading the operating system Windows (10.0.14393), Conexant driver failed. No device installed. Also in the Device Manager, Intel High Definition Audio is missing a driver. Cannot find a copy (grouped with another driver... video perhaps).

    In any case, fixed the problem of driver Conexant by completely uninstall Conexant Audio ISST and re-install.

    Now, my only problem is that the audio does not turn off to a HD TV plugged into the HDMI port. Video is fine, but no sound. HDMI does not show well in Audio devices.

    Any ideas? HDMI port connected to the Intel High Definition Audio device?

    The device for the device ID Intel HD Audio are:

    INTELAUDIO\FUNC_01 & VEN_8086 & DEV_2809 & SUBSYS_80860101 & REV_1000
    INTELAUDIO\FUNC_01, VEN_8086 & DEV_2809 & SUBSYS_80860101

    Thank you

    Ed ski

    Hello:

    Yes, the Intel HD audio device that needs the Intel graphics driver reinstalled.

    I propose this option to install the driver, because sometimes simply reinstall the graphics driver Intel does not work.

    Download and install this free utility for files.  The file 2nd on the list is 64-bit.

    http://www.7-zip.org/

    After installing 7 - Zip, download and save, but do not run this driver Intel graphics from the support page of your laptop.

    This package provides the Intel video drivers, control panel and display audio driver for the laptop models running a supported operating system.

    FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75984.exe

    After you download the file of the graphics driver, right-click on it and select 7 - zip from the list.

    Have 7-Zip extract of: and leave it to decompress the file in the file name (sp75984).

    When this is done, go to Device Manager and click on the Intel HDMI audio device problem requiring the driver.

    Click the driver tab.

    Click on set to update driver.

    Select her browse my computer for driver software option and navigate to the driver 7-Zip created folder.

    Make sure that the include subfolders is selected and the driver should install.

    Then restart the PC, and you should be able to get audio and video from the HDMI connection.

  • OTP-S790 necessary for 4K upscaling, or is upscaling of 65-inch and a 55 inch TV 4 good K without the use of 4K

    Hello

    in a few weeks I will buy tv 65 inch Sony 4K. the question I have is the OTP-S790 who has 4K upscaling, necessary or is a very good blu - ray player?

    Do you use both outputs HDMI on the back of the drive is plugged into the tv? or do you use just 1?

    Thanks to anyone who can answer to this

    Hello BurntPopcorn-

    Thank you for posting. The BDPS790 is able to output 4K using both outputs HDMI. If you look at the TV XBR55/65X900A I would have them perform no upscaling as the Bravia engine in them is great.

  • How to create a DVD with DVD Studio Pro and an external DVD burner?

    Hello

    I am trying to create a DVD with DVD Studio Pro. My internal DVD drive no longer works. I have an external DVD burner - slim portable DVD writer. I create the project into DVD Studio Pro, and when in the program, it works fine when I "stimulate". Well, I can't burn it.  When I look for the external DVD writer in my finder, it is not and I don't know how or where to select the option so it is programmed to burn the external DVD writer. Any advice? Thank you have a great week.

    I found a thread that has addressed this issue, but does not help me to solve my problem. Meg the dog was told this to her in question written by Scott Stark. I tried his solution of generation and format, but after pressing the burn a window appears saying "insert disc please insert acceptable DVD recordable media."  I tried to use another blank DVD, it did not help. I use Word for Word, I heard that those who are the best blank DVDs, you can buy. Thanks again for your time!

  • Satellite P200 (PSPB3E) - HDMI audio driver, Windows XP Home edition

    Hello

    I use Windows XP at the moment and I can't seem to find a driver to get the sound on the functioning of the HDMI port.

    I have the latest drivers for the graphics card using mobility modder.

    The sound works without no driver install Linux ubuntu and of course on the vista build that comes pre installed on the laptop.

    Someone help out me here please :)

    Thanks in advance.

    Jon.

    I tested with my A300 preinstalled WXP and I managed to do the work.
    Before you start movie go to sound properties (Control Panel) and located in the device tabs und audio voice by default HDMI device and confirm with OK.

    After do this start the movie and I hope you get sound on TV.

    Please let me know if it works for you.

  • HDMI Audio and Windows 7

    I'm trying to connect my Pavilion dv6 on my HDTV with a HDMI cable. I make the video, but no audio on the TV speakers. The problem started after I upgraded from Vista to Windows 7. I had no problem with HDMI with windows Vista.

    I tried to date/reinstall the audio drivers from the HP website, but it does not work. I also tried to go into the control panel and change the playback device, but the HDMI audio device icon no longer appears in the playback devices dialog box. Read-only devices are speakers and headphones double independent double headphones and SPDIF (Digital Out Via HP dock.)

    How can I solve this problem? Why the HDMI device is not displayed in the reading dialog box?

    Hi all HDMI his problem solved after I installed the new windows 7, icon hdmi on the menu of display devices have disappeared.  Here's what I did and the icon go back and redo the sound work of hdmi. Graphics cards intel must be updated. The link below will take you to the site intel and it detects the updates required for your system. http://www.Intel.com/support/detect.htm run the program and install the required updates and then restart windows. HDMI icon will be back and the sound will work normal as before.  I hope it will solve the problem of everyone with the hdmi sound problem. I have hp Pavilion dv6, I'm happy to hear the clear sound crisp again of my bar of his Philips HTS 8100. Kevin www.canvasdelight.com

  • HP 15 - F039: HP 15-f039wm Notebook PC HDMI Audio w7

    W7 32 bit drivers vidio of operation fixed thanks, but when it is connected by HDMI, there is no Audio thru external hook toward the high peak is very good, no sound is there at - he a HDMI Audio Driver needed or knowledge to work with hp 15 race W7 32 bit

    Hello:

    The driver that I gave you in your other post has a record of HDMI audio driver.

    I hope that you still have the record of the driver, and in this folder, you should see a DisplayAudio file.

    You may need to manually install the driver.

    Under the category of audio, video and game controllers device, Manager there are two audio devices.

    Audio integrated Realtek and a HDMI audio device and it may be missing the driver.

    Anyway, find the audio device HD requiring the driver, click the driver tab.

    Click on set to update driver.  Select her browse my computer for driver software option and navigate to your Intel graphics display Audio driver folder.

    Make sure that the include subfolders is selected and the driver should install.

    I also zipped and tied the record of the HDMI audio driver below if you want to use it.

  • Audio jerky and Visual DVD on Windows XP

    I'm having a problem with DVD playback on my computer. I have to play a DVD on the connection to the E drive and audio and video playback is very jerky from end to end. I tried this on the connection of F: and it did not do here. I know that this isn't the drive because it will do so independently of any reader is connected to the E:. Also tried different connections, food, ATA, still another cord ATA and I always get the same thing. What is the cause and the solution?

    You say that the player plays on the e drive.

    you traded him the e drive cable, and there are still problems.

    Neither drive has a problem on the f drive.

    If the e drive has always been the same motherboard - only troquee connection cable at the end of the motor, then I'd say it's the connection to the motherboard that is defective, restricting the flow of data.

    Solution, only use f drive or buy a new motherboard.

    Of course, it is difficult to say exactly remotely without seeing anything, but that's my best guess.

  • HDMI audio problem

    RealTech HD audio drivers? Just installed cards GeForce GTS250 Zalman edition on nForce 780i SLI Mobo, integrated realtech audio output HD, win XP pro x 64 O.S. is there a way to xmit audio and vidio out on GTS 250 HDMI? Disc that came with not much of help vidio card, refer to the internet for the latest drivers @ xfxforce.com. I didn't know what I was lookin it. Too much to QVC! Basket basket, Com Man tools!

    Most of the (chip based on nVidia) Geforce video cards require that the 'Digital' audio 'motherboard' port be connected with 'internal' audio HDMI cable 'out' pins on the video card.

    It is worth noting that the HDMI audio may be limited to audio 2.1.

Maybe you are looking for