Fix Corruption of the BIOS?

Similar Questions

• Corruption of the BIOS to the Satellite M40

  Hi all.

  I have an old laptop Toshiba Satellite M40 with damaged BIOS which of course does not start. TI powers drop down 3 sec after power, which means that it does not pass the test STATION. I understand various forum that it is not the competence of technicians ASP and I'm not ready to hear things like 'replace maother Board' of these guys.

  I heard talk about techniques that can reflash the BIOS in the CMOS memory using a floppy drive loaded with a version of BIOS.

  The computer is in pretty good condition, including a new 80 Gb HD and was working fine until I tried to update the BIOS. I think it should be fix and spend a few hours on it.

  Any ideas on the issue were greatly appreciated.

  Hello

  I'm afraid that you are ready to hear just a positive thing or what. Are you here to have the real discussion or you want to hear a fairy tale. You wrote in your ad that the BIOS is damaged. I guess that you know very well what should be done with pieces of damaged equipment.

  How you want to reflash the BIOS if your laptop is running in only 3 seconds. Please be serious.

• outcome of the corruption of the bios HP g61 - 420 ca

  Hello

  Please give me a solution to replace my corrupt bios. Has been turned off during an update of the bios from windows.

  Thank you.

  reteece wrote:

  Hello

  Please give me a solution to replace my corrupt bios. Has been turned off during an update of the bios from windows.

  Thank you.

  Windows does not have the BIOS update.  Could you please provide more details on the problem.  You receive an error when you start up the computer?

• Satellite M40 - how to reflash the BIOS with the same version?

  Hey guys read the forums trying to find a solution for my problem. After that I reformatted the hard drive with the original CD every time you restart computer that wifi will go down, even if the switch is turned "on" and will not come on until you turn off manually and powered.

  The last time I fixed it by the BIOS update (newer) 1.70 this time I can't reflash BIOS since it's flash-based window and it verifies that I have 1.70. I reinstalled the latest drivers and software for all. I have searche too many old BIOS files if someone older mind Sending via 1.60, 1.50, for this computer would be nice greatrly it is M40 (PSM40E), it is the model with the video card Nvidia 6600.
  Or any idea how can I reflash 1.70 again?

  Thank you, Daniel

  Hello!

  Flashing the BIOS with an equal or older version is not possible. Therefore, you must go to an authorized service provider.
  Technicians can relfash with a same or older version.

  If you don't know where is the nearest ASP you should look on the Toshiba site. There you can search for it.

  Good bye

• How to check the version of the BIOS is not damaged on Equium A60

  I have another thread in regards to IEEE 1394 host controller usually start and other strange questions for Equium A60.

  Regarding above, I feel THAT BIOS can be altered that I cut two pins to get rid of power according to the tried and tested instruction on another site, the BIOS password. Properly deleted BIOS password! Password requirement has occurred after that the computer is not used for a long time. Maybe the short circuit with a paperclip to cause corruption of the BIOS? Computer note seems to maintain time and date so battery CMOS OK?

  Can I reflash the BIOS or require special equipment? Any help appreciated more

  Hello!

  Why would you say that the BIOS is intact?

  If you have downloaded the BIOS Toshiba it s not intact. Toshiba doesn't offer these BIOS versions, they would be tested before.

  The BIOS (for example with an older version), you can reflash t. This can make an ASP (authorized service provider). If you wish, contact your local ASP. Only, they know to do this and will not get such textbook because it s a user to user forum.

  Good bye

• Cannot find switchable graphics mode in the bios.

  Hello. I have 6b04er for HP Pavilion dv6 laptop. I want to switch to fixed mode in the bios to use only discrete videocard (6750 m). I've updated the latest version of the bios for my device, but I can't yet find "switchable graphics mode" option in the bios. Help, please!
  Thank you.

  Spoody Hello, welcome to the Forums of HP. Your laptop should have an option in the BIOS to set fixed mode. Use this document to refer to the screenshot of the BIOS and let me know if your the same section
  (Skip the link title): OpenGL Applications cannot use discrete GPU

  Here's the switchable graphics overview. See the section "Determine whether your computer has switchable graphics" and let me know if this indicates you have switchable graphics: all of the switchable graphics or dual GPU

  Let me know the results.

• How can I fix corrupted BIOS? tx2500

  My tx2500 gives the double LED flash that signals that a corrupt BIOS.  According to this URL you can 'restore BIOS backup shipped (jumpers).'  If anyone has any idea what that means and how to fix my computer, I would be very grateful.

  Here are two possible ways to restore this BIOS:

  =====================================================================================

  Option: see if your system can restore the BIOS:

  Select your laptop in this list of tx2500 series

  Reach:

  Solve a problem > (vivid RAM) memory / motherboards / BIOS > BIOS / UEFI > restore the BIOS

  For example, if the HP Pavilion tx2500 CTO is your laptop, then this is your Page: restoration of the BIOS

  ---------------------------------------------------------------------------------------------------------------------------------------

  -Option Use UEFI environment to restore BIOS

  • Go fill stop condition (all).
  • Press the power button and
  • Immediately press the ESC key to enter the "Start Menu"
  • Select "F2" to open the advanced systems HP Diagnostics menu screen
  • Select the BIOS / Firmware management

  --------------------------------------------------------------------------------------------------------------------------------------

  Option - Download the BIOS of your laptop Web page - software file and downloads section

  • Extract the contents and put the files on the root of a USB key
  • Connect the USB key to a USB 2.0 on your system
  • Plug the power adapter.
  • From a complete stop condition (all off).
  • Press the power button and
  • Immediately the Windows key while tapping the button 'B '.
  • The process of updating the BIOS should start
  • Follow the prompts to restore your BIOS, use the BIOS file on your USB

  THANKS to erico

  for this information!

  Also erico:

  There are another thread here in the forum where it is covered. There are a few in the wire between the members, but there is also valuable information there.

  ===================================================================================
  

  I hope this helps!

• Windows 8 fingerprint reader no longer works (need to Flash the BIOS to fix)

  I have a DV6-7014nr bought around September of 2012.  I have upgraded to WIndows 8 when it first came out.  I had no problem with the reader of fingerprints on Windows 7, but do not use for a long time.

  As the subject says.  I can run it for a few weeks (on Windows 8), and the fingerprint reader stops working.  None of the biometric devices are listed in the Device Manager.  If I try to load the driver, it does nothing, as if the player is simply not there the responsibility of the driver closes just (with no message).

  Peripheral Biometirc in the Panel control says there is no biometric device found and simplepass opens without the fingerprint reader recognized.

  The only thing that solves this is my BIOS which comes Insyde to re-flashing. It is noted in the setup of the BIOS relating to biometric devices.  I have just discovred that BIOS update solves a problem because there was an update that I applied.  Have to reapply the update of the BIOS to fix this seems excessive to us.

  Added March 29, 2013:

  I just re-applied the BIOS two days ago and already the figerprint teader plug working again.  I tried a hard reset (because I saw that as a solution previously, and it is easier and faster to re-flashing the BIOS).  Who has shut down, remove the battery, now the power for 30 seconds button, boot the system without the battery.  He has not fixed the problem and I can't even understand why the fingerprint reader keeps disabling.  A re-BIOS flash solves the problem, it seems that the problem must be with the BIOS software.  Oh I also had turned off the "Allow windows to turn off the device to save power" for the biometric device before he went kaput.  It doesn't stop of is suckier.

  There must be a better way.

  Thank you

  Hello cjwh888,

  Try to restore your BIOS then use Recovery Manager to restore your software and drivers.

  Please let me know if it helps.

  Good luck!

• HP EliteBook 745/755/725 G3: Missing 'Label restore electronic tool' to fix the POST error boot in the BIOS 1.08

  The latest BIOS for the HP EliteBook 745/755/725 G3 made reference to a 'restoration tool electronic Label' to remove a MESSAGE error after flashing the BIOS to 1.08.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7815285&swItemId=ob_160552_1&swEnvOid=419...

  According to the release notes: "NOTE: for systems that do not comes with BIOS version 1.05 or later, this utility may be required if the BIOS has been updated.» Visit the page of the BIOS and drivers on www.support.hp.com and follow the instructions using the Restore tool from HP on the electronic label. »

  This tool can be found on the support Web site.

  If flashing the BIOS is causing this problem for systems shipped with a version of BIOS before 1.05 why is the tool not available to correct the problem?

  Better question is why was - this BIOS update published at all if it can cause a system to stop for 15 seconds during POST if you do not have the correction tool POST message as described in the release notes and the POST message?

  Version 1.01 of the electronic Label restore tool has fixed my problem.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_162255_1&lang=en&cc=us&hprpt_id=HPGL_ALERTS_1873677&JumpID=em_alerts_us-us_Mar16_xbu_all_all_641843_1873677_LaptopsandHybrids_routine__/

• BIOS corrupted in the new motherboard for computer laptop g6-1050sv

  I have a pavilion laptop G6. Earlier I had replace the motherboard with a new one. He is working finebut now when I try to open it I got the bios corrupted message. I hit enter and after the reset, I had a black screen and the capslock key blink twice. I tried several solutions (Windows key + B before departure), but I got a black screen. Anyone know how to update the bios with USB STICK? I tried to put the files from the last root forlder of the flash bios update, but did not work. Any suggestion?

  the motherboard is a month old. The laptop is g6-1050sv

  I tried the following solution

  1. I removed the power cord

  2. I removed the laptop battery

  3 unplug the cmos battery

  4. I waited for 5 minutes.

  5. plug the power cord

  6. press the power button

  do all of the above steps I finally I saw again the message of the bios corruption.  I did not support a button any. I just waited to start loading windows. After loading, I've updated the bios to the latest version. Now the laptop works well, but I have another problem.

  When I install Intel HD drivers screen fill in with points of light. If remove drivers and load the default windows drivers everything works fine. Any suggestions?

  I create new threat here

• Get error when trying to backup on USB: the willing backup of a file system drive corrupted. Fix it using the verification tool disk errors, or choose another backup location. (0 x 81000008)

  Original title: what is the disk error checking tool

  I am creating a backup on a USB key, I bought recently. But when I do an error apears that the backup was not successful, and then this error appears "the backup target K:\ device failed with the following error:"

  The backup disk has a corrupted file system. Fix it using the verification tool disk errors, or choose another backup location. (0 x 81000008)"
  SOMEONE PLEASE HELP!

  I am creating a backup on a USB key, I bought recently. But when I do an error apears that the backup was not successful, and then this error appears " the backup device target K:\ failed with the following error: "

  The backup disk has a corrupted file system. Fix it using the verification tool disk errors, or choose another backup location. (0x81000008)"

  SOMEONE PLEASE HELP!

  Hello

  This error can occur if there are problems of system files on the drive selected for the backup file location. Have you tried to save the backup to a drive or another location? Please try the following to fix the disc
  [1] method: Using Check Disk to find the files corrupt
  • In the start menu, look for invites
  • Right click on command prompt and select run as administrator
  • When the application starts, insert the following text and press ENTER: Chkdsk.exe/f/x k:
    Where we mean K:  the disc damaged.

  NOTICE: Check disk is maybe not able to lock the drive and launch the operation if the disk contains files required for Windows to run correctly. It asks if you want to schedule a check disk at the next startup upwards instead.
  Thank you
  Have a nice day :)

• ENVY 700-430qe: ENVY700 - 430qe.doesnt start.cant go into the BIOS. HOW TO FIX BIOS USB WITH HOTKYES?

  Hello!

  The last time to check other HARD drive I change in the BIOS ACHI to IDE

  checked the HARD drive and IDE to AHCI back... accept and

  restart the PC

  And now

  When I start my PC it doen't boot.

  After the news on the video card, I see only round blue "HP".

  When I try to go into the BIOS and press F10 I can see only

  

  It's her! Feeze!

  I removed all the cards PCI and HDD - ho help.

  I have zero CMOS - no help

  (When I start the PC the LED HDD desktop Flash two short time and OFF)

  LED WiFi miniPCI WiFi card too

  If I insert the USB key for sturtup LED on USB drive flashes)

  Seems to me that something wrong with the BIOS or HARD disc controller...

  Now, I think that CD/HDD is not recognized

  but I hope that USB still works

  Please help me find the difficulty of the BIOS the USB drive procedure and shortcut keys.

  Before I read something 'PowerButton + Windows key + B'... but can't find it :-(

  Thank you.

  Hi there @BobMarley

  I understand you are looking for assistance for the recovery of the BIOS by using the shortcut, or by using a USB key. I'm happy to help you with this.

  Here are two documents for you to check. Of course, the first is specific to desktop computers and covers the shortcut key. The other property that for laptops also includes a section on the use of a USB device.

  Desktop HP - BIOS recovery

  HP Notebook PC - restore BIOS

  Also on the support forums, there is a process described by @HaggisCat, you can find of use in the preparation of a USB flash drive. You will need to have the correct BIOS softpaq to go with it.

  How Flash BIOS without HP Partition tools

  At the time I'm posting, there are few maintenance forum, so I can't find the correct file, but it should be found here under the BIOS of the page section software and drivers: HP ENVY - 700-430qe CTO desktop

  I hope this helps. Let me know if you have any other questions.

• Corruption of the HP Envy Ultrabook 6-1090eo bios

  Hello! I am new to the forum and have som issues with my laptop.

  The system freezes and I rebooted the computer and now blink twice caps lock. The screen is totally black and I can't do anything. I read a lot on the net for a solution, but nothing has helped yet. I installed Support HP UEFI environment for a kingston 1gig memory and placed the bios (01894.bin) file in bios\current. I also put in the root and everywhere else but nothing. My question is what should I name the .bin fie? In the platform.ini file, it says:

  [Platform_Check]
  Flag = 3
  PlatformName1 = AA
  PlatformName2 = BB

  I tried (both top/lowerlower) 0489.bin aa.bin bb.bin and also changes the ending at .fd file.

  I do not have the original partition on my hard drive so I can't restore frome there. I ordered a restoration of HP usb key, but it will take som time it happens.

  Andy tool (phoenixtool) cannot open the bios file, so I can't decipher the bios file to search for a character string containing the name of the file

  The pc seeks on the USB, but only for a few seconds and then the caps lock will begin to Flash.

  Really hope you guys can help out me!

  Sorry for my bad English and thanks in advance!

  Best regards, Linus

  I have sucsessfully now recovered my BIOS

  I used the sp57337.exe for Hp ENVY 4 & 6 and generated a BIOS file. GIS and. File DEC with Andy tool. I loaded the file generated on \BIOS\Current and \BIOS\Previous and used the Windows key + B to load the file on my USB key. After that, I have updated the BIOS to the latest version.
  
  Thanks for your help anyway!

• I think I have a virus that modifies my boot sequence in the Bios. It only happens some of the time when I re-boot. I have to go in and change this back to fix it.

  My computer is 2009, and I have a MSI motherboard. My operating system is Windows 7. Thank you

  Hello

  1. What is the number of brand and model of the computer?

  2. do you get an error message? If Yes, what is the full and exact error message?

  3. were there any changes or updates made on the computer?

  I suggest you to restore the default settings of the BIOS (Basic Input Output System).

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk

  I suggest you contact the manufacturer for help with the BIOS settings.

  In addition, refer

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

• Jet 7 Tablet 5709: HP Jet 7 touch screen does not work in Windows even if it works in the BIOS menu advanced starup

  Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.

  I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.

  It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?

  Hello Moronihah,

  You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?

  That's what you need to do first.

  Then, you have to go to the HP website and install the drivers on your USB.

  Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.

  HP Software and Driver Downloads

  You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.