Output to chronology in movie problem

Similar Questions

• Output to the pixel ratio problem

  A bit of a newbie here with a problem. I do in fact just an exercise in a book and I'm a little confused about something.

  I have a composition that I put for NTSC D1. I imported images .swf created at 720 x 534, wider format final to take account of the stretch. Once inside the AE, I form the comp images. Now, the images in AE looks stretched. I understand however that when it is used in the video material that will look correct.

  So, I made the composition in a .mov file. When I consult this file, the animation is is more tense. I expect this to always look stretched on my computer screen and that if this video was broadcast on a TV or other video would look right.

  
  I don't understand why the .mov is not stretched more. Can anyone help?

  Thanks in advance.

  It seems that it is just a Quicktime setting.  QuickTime is set the output that see you so that it doesn't look like stretched by default.

  There is one "opening in line with:" option window > show movie properties.

  This article has shown the way:

  http://www.digitalrebellion.com/blog/posts/why_does_quicktime_report_a_different_resolutio tswan.html

• Audio output using the USB connector problem

  I use a USB connector to connect with Audio output. It's because my headphones Jack does not work.

  It worked without problems so far.

  My problem is that there is no output from my laptop to this USB device. The music plays and can be heard on the laptop. Connections (USB device & son) of the laptop work.

  I'm ising Vista home versio

  Any ideas?

  Try this:

  With the USB speaker connected, right click on the speaker icon on the tray (right), left click on 'sounds '. On the tab 'Read' the USB speaker should be listed, click to select it, and then click the button "set as default". Click the OK button to exit.

  Alternatively, you can go to control panel, Sound.

• HP ENVY 15 Notebook PC: Touchpad and erratic cursor movement problem

  My cursor shows erratic all over the screen movements while trying to move from one place to the other. This happens when I use my touch pad to control the cursor. After showing the erratic movements, it starts clicking Cesti on the entire screen. Clicks are random, and the movement of the cursor is also random.

  I tried to update my driver and everything, but the problem is still not fixed. Help regarding this situation is very welcome.

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  Looks like you are facing difficulties to solve problems with your laptop Touchpad

  We will surely help you with this

  Steps to drain the static charge and load the BIOS default settings to solve the problem

  Step 01. Turn off the laptop

  Step 02. Disconnect the power/AC adapter and also remove the battery too

  Step 03. Press and hold the power button of the laptop for a minute

  Step 04. Now re - insert the battery back in and plug again the power supply/adapter

  Step 05. Start Notepad and keep pressing the F10 key during startup to access the BIOS

  Step 06. Once you get the BIOS, please press F5 or F9 key to load the default settings for the BIOS

  Step 07. Now press ESC/ESC. Save Changes and Exit - Yes

  Step 08. Now, please wait until the unit load the Windows operating system

  Now please download and reinstall the drivers from the touchpad for your laptop on the Site of HP Support

  Please click on this link to find several troubleshooting steps to solve this problem

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Burning windows movie problem?

  Help, please!

  CHRISTMAS GIFT!
  My film and tried to burn it on a DVD-R and said that there is a burning problem. I tried 3 discs! What I am doing wrong? It's a system windows media audio/video file.
  Help, please...
  Thank you!
  Jen

  Help, please!

  CHRISTMAS GIFT!

  My film and tried to burn it on a DVD-R and said that there is a burning problem. I tried 3 discs! What I am doing wrong? It's a system windows media audio/video file.

  Help, please...

  Thank you!

  Jen

  =====================================
  No guarantee... but if you use Windows DVD
  Maker, the following information may be worth a visit.

  It is possible that one or more of your source files are
  but corrupted by disabling all filters in DVD Maker
  before burning the DVD can be worth a try...

  See the following article:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll waaay down for...) What to do in case of problems)

  If you're still having problems and that you have created the
  Project Live Movie Maker and saved in the WMV
  film format in a folder on your hard drive...

  The following freeware can burn a video DVD very easily:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  Freemake free Video Converter - how to burn video DVDs
  http://www.Freemake.com/how_to/how_to_burn_dvd_video

  Good luck...

• sequence of images to mov problem

  In photoshop, I'm trying to export image sequence to file mov 25 fps.

  But whatever the framerate I choose what it will export it at 30 frames per second.

  "I created a flash 25 fps 375 images duration animation: 15 sec.

  exported to image seq

  imported for seq image in photoshop and export it to mp4 @25 fps. but the video length comes to 13sec bases on 30 frames per second.

  Is there a solution to this?

  Yes, it's a problem with image sequences. You will need to use another tool to convert files...

  Mylenium

• A small animation for export of a high-resolution movie - problem.

  Hi all

  I got myself deeply in this issue and I would like someone to get me any type of solution.

  You know when you've spent days days working on something for a client, the deadline is yesterday and suddenly, it seems that this is going to lose and the client will kill you?

  This kind of problem.

  I'm almost done work this short cartoon and the plan is that export to a movie file. Of course, this must be high resolution (at least 720) and must stay all sounds.

  I stupidly chose to work in the document of 640 x 360 size, thinking it will make my pc work faster. I created all in vectors, so do not see why, that shouldn't make me export a video of any size.

  Some research I've done suggests that I am out of luck here. Can I export of larger size than the original, but it's all "pixelated" and nasty looking.

  Seems to me that the only solution is to increase the size of the document and start enlargin of hundreds of layers one by one. This would - case best screenplay - cost me a few days of work, but most would probably ruin the animation and get me stuck.

  It's really something that I think is super easy to do, so I hope that my case is not altogether lost.

  Anyone have any good ideas for me?

  Thank you in advance!

  ELB

  If the file has no actionscript have you tried to turn it into a movieclip in another file and enlarging it?  If she has no Actionscript, have you tried to load dynamically in another file and resizing after loading?

• Flex 'move' problem

  I'm currently doing a picture of banner for a site like kijiji. The image must pass through the banner to the right to the left, so I use an element of 'move', the problem is that speed is not constant, when it starts the move going (example) 100pixels/seconds, when he approaches the increase in the speed of the middle and after the Middle, speed decreases, basically, it seems to be as an acceleration of the reduction/deceleration rules.
  
  Is there a way to define a constant speed to the moved item?

  THANK YOU :D

  easingFunction = "{Linear.easeNone}", you must import the library of easing.* for this, this suppression the acceleration/deceleration of the movement to keep speed fixed. "

  Thanks again.

• My computer does not have an audio output. There is no problem with the speaker

  I tried to connect many speakers, but none worked. I don't know if the problem is with the pilot.

  I open the CPU and found that nothing is wrong with the connection.

  Hi Madeleine Richard.

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  Method 1

  See the link below and run the fixit tool available, check if it helps.

  Diagnose and automatically repair audio playback problems

  http://support.Microsoft.com/mats/AudioPlayback/

  Method 2

  If the previous step fails, then I suggest that you manually download and install the latest sound card drivers by visiting the sound card manufacturer's Web site and check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• The output of a script redirection problem

  Hi guys,.

  I used the script get.vievent of vsphere powercli console example "modified for the last 24 hours registered users"

  Original screenplay:

  C:\PS > Connect-VIServer-Server 10.23.113.41

  $events = get-VIEvent - MaxSamples 100

  foreach ($event in $events) {if ($event.fullFormattedMessage - match "user)}

  (connected.*)@\b\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}\b') {Write-Host ("User

  "+ $matches [1] +" connected to: "(+ $event.createdTime)}}"

  When I ran the output to the console is:

  Vcops of the user connected to the: 21/03/2016 04:50:41

  Vcops of the user connected to the: 21/03/2016 04:20:21

  Backupsvahcs of the user connected to the: 21/03/2016 04:01:37

  Backupsvahcs of the user connected to the: 21/03/2016 04:01:36

  Backupsvahcs of the user connected to the: 21/03/2016 04:01:36

  Backupsvahcs of the user connected to the: 21/03/2016 04:01:31

  Vcloudum of the user connected to the: 21/03/2016 04:00:22

  Vcops of the user connected to the: 21/03/2016-03:50

  Vcops of the user connected to the: 21/03/2016-03:19:39

  Vcloudum of the user connected to the: 21/03/2016-03:00:25

  Vcops of the user connected to the: 21/03/2016 02:49:18

  Vcops of the user connected to the: 21/03/2016 02:18:58

  So far, everything is beautiful!

  Updated the script:

  $fecha = get-date-Format D

  $todayMidnight = (get-Date-time Minute 0 - 0 - 0 second). AddMinutes(-1)

  $events = get-VIEvent-start $todayMidnight.AddDays(-1)-finish $todayMidnight.AddDays(-0)

  $events | foreach ($event in $events) {if ($event.fullFormattedMessage - corresponds to ' User(.*) @\b\d {1,3} \.\d {1,3} \.\d {1,3} \.\d {1,3} \b connected ') {Write-Host ('User' + $matches [1] + "" connected to: "+ $event.createdTime")}} |  out-file c:\ReportesvCENTER\test.txt

  When I run the script, I get:

  PowerCLI C:\PS-Scripts >.\loggedin1.ps1

  Unexpected token 'in' in expression or statement.

  C:\PS-Scripts\loggedin1.ps1:9 char: 29

  + $events | foreach ($event in < < < < $events) {if ($event.fullFormattedMessage)}

  (- match to ' User(.*) @\b\d {1,3} \.\d {1,3} \.\d {1,3} \.\d {1,3} \b connected ') {Write-Hos

  {{t ('User' + $matches [1] + "" connected to: "+ $event.createdTime")}} |  > c:\Repo

  rtesvCENTER\test.txt

  + CategoryInfo: ParserError: (in: String) [], ParseException exception

  + FullyQualifiedErrorId: UnexpectedToken

  PowerCLI C:\PS-Scripts >

  But if I do not include the hose before foreach:

  PowerCLI C:\PS-Scripts >.\loggedin1.ps1

  An empty pipe element is not allowed.

  C:\PS-Scripts\loggedin1.ps1:9 tank: 209

  + foreach ($event in $events) {if ($event.fullFormattedMessage - match "User(.*))}

  ") @\b\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}\b connected ') {Write-Host ('User' + $mat

  (ches [1] + "connecté à:" + $event.createdTime)}} | < < < > < c:\ReportesvCENTE

  R\test.txt

  + CategoryInfo: ParserError: (:)) [], ParseException Exception)

  + FullyQualifiedErrorId: EmptyPipeElement

  And if I modified the script again:

  $fecha = get-date-Format D

  $alluser = @)

  $todayMidnight = (get-Date-time Minute 0 - 0 - 0 second). AddMinutes(-1)

  $events = get-VIEvent-start $todayMidnight.AddDays(-1)-finish $todayMidnight.AddDays(-0)

  foreach ($event in $events) {if ($event.fullFormattedMessage - corresponds to ' User(.*) @\b\d {1,3} \.\d {1,3} \.\d {1,3} \.\d {1,3} \b connected ') {Write-Host ('User' + $matches [1] + "" connected to: "+ $event.createdTime")}}

  $alluser += $events

  $alluser | Select the username, IP address, Createduserid, FullFormattedMessage |  out-file c:\ReportesvCENTER\Usuarios-conectadosPav-$(Get-Date-f yyyyMMdd-hhmm)-$fecha.txt

  I send the output to a file, but I do not send the result equal the console.

  Can someone helpe please?

  Thank you

  Carlos

  You must use Write-Host sparingly. instead of trying to Write-host using Write-Output. You can also build the string without Write-Host IE "User $($matches [1]) connected to: $($event.createdTime).

  Don't forget that write-host may not be redirected to a different output, just like the Format cmdlets.

  I could write this using an object as output and put it into a function.

  $events = get-VIEvent - MaxSamples 100

  Function Get-UserLogins

  {

  [CmdletBinding()]

  Param

  (

  [Parameter (Mandatory = $true, Position = 0)]

  $Events

  )

  foreach ($event in $events)

  {

  If ($event.fullFormattedMessage - corresponds to ' User(.*) @\b\d {1,3} \.\d {1,3} \.\d {1,3} \.\d {1,3} \b connected ")

  {

  New-Object - TypeName PSObject-property @{' user ' = $Matches [1]; "} {LogginTime'= $Event.CreatedTime}

  }

  }

  }

• Size of output to chronology doesn´t photo match the size in the source monitor

  I am a new user of adobre first cc. I am facing a problem when I open an image (picture of adobe photshop) in the source (adobe first) monitor, the size is appropriate, but when I drag to the timeline in order to create a sequence pictures didn t keep the size that I capture the source monitor. In general, they are smaller than in the source monitor. Could you help me?

  Hi Pedro,

  Please, do a right-click on the image and choose framesize greatness.

  Thank you

• Path of frustrating movement problem

  I'm trying to animate a text layer to simply move on the screen in a straight line between three keyframes.

  When I drag the text from the second to the third position, a curved path appears spontaneously, to take it too far beyond where I want it to go. If I try to drag it to where I want, it creates a path that goes past this point and then double back on itself and back again.

  I tried again and again to get rid of this little path, but it won't go away. I deleted the layer and keyframes and made the again, I rebooted several times AE without saving the changes, I even restarted my computer, but whenever he comes back. I'm at my wits end.

  Help, please.

  Thank you.

  See this FAQ entry.

• PreProCs4 rendering with imported QuickTime Movie problem

  I made an animation of colors... hand drawn frame by frame in Flash CS4.  I exported the file as a QuickTime movie and it imported into CS4 Pro Prem.  It was fine until I made.  Now that the previous and after the images appear as shadows on the actual image as it moves on the screen.  Am I missing something?  I read in my Flash instruction book How to export animations so they can be used in Prem Pro so I don't understand why this is happening.  Help...

  Have you speed up or slow down the images in the Pr?  Regardless, uncheck mixture of framework for the clip and see if things improve.  Mixture of frame's context menu.

  -Jeff

• fusion of movement problem 2.0.6

  I just upgraded to a bigger hard drive and now can't get the Fusion to work.  When I try to open it, a license window opens, asking my serial number, with the line "this copy of VMWare Fusion is not yet registered."  I get the serial number, it takes me to the password of my computer window.  I get my password, and it goes back to the licenses window.  Nothing else happens.

  Fusion worked week last on my smaller hard disk.  I have the same operating system (Mac OS 10.6.8) and all the rest.  All of them work.

  Please help me to get back to work on the merger.

  Thank you-

  Marc

  Since you're using an old version, I recommend you to manually download the latest version 2.0.8.

  Sign in to your myvmware account and access this link

  https://my.VMware.com/group/VMware/info?slug=desktop_end_user_computing/vmware_fusion/2_0

  Try to activate after installation of this.

  For more details, see this article

• Video output Qosimio G20 S problem - NTSC TV

  Hi all

  I have a Qosmio G20-110, bought in the United Kingdom and problems of video output via the S-video cable to a flat TV in US I have the image but it rolls down very quickly. When he does that, I played video clips AVI on windows media player. I followed the Nvidia Setup program to get the result on portable computer LCD screen and tv screen synchronized, and that's ok, except for the picture of rolling. I don't know if there is a problem with the NTSC output - is this still a problem when watching digital videos on your laptop? - or if it's a different kind of problem. Any advice much appreciated.

  BTW, I read elsewhere on the forum that the media center TV works in the country of purchase - not the case with my laptop, I've watched television successfully both in the United Kingdom (PAL system) and the United States (NTSC system).

  Is it possible to check or change the type of output via s video cable?

  Hello

  I have no experience with a standard NTSC TV but AFAIK the PAL signal supports 50 Hz and supports the NTSC 60 Hz signal.
  Maybe it has something to do with your problem.

  You will find the detailed description:
  http://en.Wikipedia.org/wiki/NTSC

  However, in your case I would recommend BISO settings.
  In many of the BIOS version, you can pass the video parameters between NTCS and PAL.

  PS: I recommend you to test the video output also on different TV s to make sure this isn't a TV related issue.

  Good luck