Video output Qosimio G20 S problem - NTSC TV

Similar Questions

• The dvd on the s-video output display problem

  I think I am doing something stupid, but I can't understand it.  I used my T40p for many years, inclunding using the vga external display monitors and digital projectors player.  For the first time, I wanted to use it to view DVDs on a TV using the s-video output capacity.

  I activated the s-video and connected to the tv without problem.  My office is correctly displayed on the TV.  However, when I use the dvd playback software to show a dvd, the tv does not display the content.  The content of the dvd shows correctly on the computer screen, but not on the TV screen.  If I use the view "full screen", nothing shows up on the TV.  If I show only the dvd in a window, then everything on the desktop is shown properly on tv, except the dvd window is blank.  Yet once, it appears correctly on the computer screen.

  I have tried various software to media, including intervideo WINDVD and Classic Media Player player.  I tried PAL and NTSC discs.  No difference.

  I think I'm missing something obvious.  Any ideas appreciated.

  T40p 2373-G3U, 1600 MHz, 1 GB RAM, WinXPP SP2.

  1400 x 1050 with ATI Mobility Fire GL 9000 LCD display adapter display.

  OK, I solved this problem myself.  The solution is to use a configuration that uses ONLY the external display.  Apparently if you enable the output s-video, but do not turn OFF the LCD screen, the video card only then produces the dvd on the LCD, not s-video content.

  There are two ways to select the s-video output only.  Go to settings-> control panel-> thinkpad configuration.  In the window of thinkpad configuration, at the top left, there are five buttons to activate different display configurations.  One of them is "tv only".  If you click this button, the LCD of the computer stops, and the s-video output became active.  Showing a dvd in this configuration using intervideo WinDVD or other programs video display shows the contents of the dvd to the TV via the s-video output screen.

  The other way is to implement a model of custom view using the Director of 'presentation', which is accessible from the 'thinkpad configuration' window described above.  It is available under the "view" dropdown  I created a custom method called 'dvd' that automatically sets the external screen in 640 X 480 resolution.  This is consistent with my standard TV ntsc resolution and avoids the need to change the display resolution before you activate the s-video output.  I choose this plan using the key FnF7 is quick and easy.

  Hope this is interesting to someone out there.

• Satellite A300 - possible port VGA - not problem of video output

  I use my VGA port in two main locations, at home to connect on an old television set via a PC/TV converter and work to connect directly to a projector.

  This week he suddenly stopped working on both at the same time. I tired to another laptop in the projector to work and it works great. I also tried different tracks. The problem is certainly my laptop (which is now almost 4 years).

  The most likely thing seems to be what is ' t the plug itself. If I plug something inside Windows (7 Ultimate) is work that is an additional monitor, but the projector/TV no signal. I've tried all the obvious things, hit F5 makes no difference, and the Windows settings have not changed. The resolution and refresh rates are properly defined. I try to avoid the standard answers on the verification of all the things that I already checked!

  Now I have a HDMI port on the side, the probability is that just buying a VGA/HDMI adapter and using this port will solve the problem? I guess if it's just a physical problem with the VGA port so it will, but the problem would be a graph problem or your motherboard, and if it is will this affect the HDMI port, but also the VGA port?

  Port VGA is an analog video output. HDMI is a digital output.
  Two are different and not related them to each other.

  So I don't very well if a HDMI adapter-> / m VGA would work properly.
  Maybe it works but only with a lower resolution. So in my opinion, FullHD is not possible. However, I think that you will need to test it with your laptop.

  Usually, you can use an adapter like HDMI to DVI or DVI to HDMI smoothly.

  With regard to the question of VGA output.

  Well, usually the Fn + F5 should pass between the internal and external production. It should work with VGA and HDMI port. Maybe it's just a software related issue.
  In your case, I will try to uninstall and update the display driver. Maybe it helps.

• Video input with Qosmio G20-108 problems

  Hello
  I try to connect a video recorder/player for my Qosmio G20-108 and have had no luck so far.
  Tried the red-yellow-white cables that came with the laptop, can get sound via the laptop, but no image.

  Then tried the input cable tv/satellite of the RGB output on the video via Media Center but can't get the laptop to tune into the video signal - just says there is no signal detected even when the video player is on and play a tape.

  Any ideas anyone?
  Thank you, Rob.

  Hello

  Qosmio G20 supports a port of 4pol TV In great video (S-video) and a TV S-video output port!
  Don't mix these two ports!

  He must connect the VCR to the * TV * S-video port!

  Best regards

• Satellite 5105 and 5205 video output bad piece (US)

  The video output is good on the 5105.

  The image on the LCD will not give a complete picture. Thirdly, the bottom is either hidden or replica the upper third of the image. Most likely, I see a drooping white or gray. This occurred when starting, too.

  I replaced the LCD screen with another of a deceased 5205. This time, only the first third shows an image. The lower 2/3 seem to be blackened.
  In addition, the Toshiba Spalsh screen logo does not appear at startup (maybe it's because it's in the field of electricity failure).
  I have not checked the State of the screen LCD 5205. I also forgot to connect this laptop to external video, when I used the
  5205 LCD.

  I just want to confirm the video cable needs replacing.

  I would like to know how completely detach from the Palm of the lower chassis. I read the instructions provided by the sticky thread. I'm stuck at the point where he seconded the palmrest except for the area around the speakers ' top'. Better yet, should what cables I detach before completely disassemble the palmrest?

  Once this is done, I intend to replace the video cable, but I also see what looks like a metal shield in the middle of the laptop. Any thoughts on treatment that, too?

  Blurred image of 5105: http://img526.imageshack.us/i/toshiba510501.jpg/
  Then the lower part is gradually degraded: http://img29.imageshack.us/i/toshiba510502.jpg/
  and: http://img196.imageshack.us/i/toshiba510504.jpg/
  and go: http://img262.imageshack.us/i/toshiba510503.jpg/

  Then I rebooted the 5105: http://img196.imageshack.us/i/toshiba510505.jpg/

  The 5205 is even more colorful!

  http://img12.imageshack.us/i/toshiba520501.jpg/
  http://img150.imageshack.us/i/toshiba520502.jpg/
  http://img262.imageshack.us/i/toshiba520503.jpg/
  http://img526.imageshack.us/i/toshiba520504.jpg/

  I'm afraid I forgot to test the video output on the 5205.

  I also posted this on Notebook Review.

  Thanks for reading!

  Hello

  I; m afraid; It looks a bit like a graphics card problem...
  If replacing the screen did not help the GPU could be affected.
  In this case, the motherboard should be replaced. It would be the worst case, because a motherboard is the most expensive part for laptop.

  In addition, you will not find any what manual disassembly here on the Toshiba page.
  These manuals are not for use public and created only for the technicians of the ASP.

  But the world wide web contains lot of information and I would recommend to google for some details.

• Video output distorted on Qosmio F10

  Hello

  Until recently, my video output on my Qosmio F10 function works beautifully. When I connect my laptop to the TV the other day, using an s-video cable, the image had turned very distorted. The TV picture flickers and sometimes disappears completely.

  My laptop has the graphics card Nvidia GeForce FX Go5700 and I changed no settings what so ever of the point in time when the video output was working properly.

  To debug, I bought a new s-video cable and an adapter SCART. The use of these I've eliminated that the s-video TV in the port is the problem. It seems to me that if something is wrong with the signal from the graphics card.

  I would be very grateful for a diagnosis on this issue.

  Thank you and best regards,

  Johan

  If you are quite sure that the cable is ok, so it could also be a problem with the connection. Maybe lose plug or something like that.
  However, as a first step, you may try to update the page Toshiba graphics card driver.

  It would be very interesting to know if such question will appear on the new OS recovered

• Equium A200 - 1V0 DVD Player error impossible of video output to an external device

  Hello
  I use my Equium A200 1V0 laptop with Vista Home Premium, and whenever I try to watch a DVD using the preinstalled Toshiba DVD Player software, I get the following error...

  "Unable to video output to an external device. Please spend your
  display the buttons on the unit by pressing the Fn + F5 after the end of the application. »

  I do not have an external monitor, and have never had a. (By pressing the Fn + F5 buttons does not work, because...) I have not attached external devices!)
  The software used to work properly, and I have not changed the settings at all.

  I have now tried to reinstall with the latest download from Toshiba, but the problem remains.

  Any thoughts would be accepted with gratitude.

  Bufster

  Hello

  I found a boyfriend of the solution.
  How?

  I searched simply here in the forum and found this thread!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726

  Jack Black has posted a link to a useful Toshiba doc that says that this error is related to the Realteck sound driver.

  Update the audio driver and you must solve this problem!

• Qosmio F10 - 136 and D-video output

  I have a Qosmio F10-136, I want to use the D-video output with cable SCART. I ve tried to change BIOS, VIEW the section, but through the various options it s PAL (SCART) NOT. Only PAL (S-Video), 525 p. 750, 1125i, 525i NTSC (US), NTSC (Japan).
  My BIOS version is 1.20, I've followed the instructions of the FAQ5300XK0012R01 and TSB4A00TK000MR0.

  Hello

  Is your unit pre-installed with original recovery media and if the display driver is original Toshiba designed one?

• Satellite P300D - no image through S-video output

  Hello!

  I can't image through my S-video output to the TV. VGA and HDMI works fine, but my TV is old and I don't have that kind of input to TV.
  The laptop recognizes TV on cable, but I can't go from a primary and secondary display.

  (satellite P300D - 12L)

  Hi bgjerg,

  Usually you can pass to your TV by using the FN + F5 key combination.
  More if you use the S-video output, you can set parameters in the display driver. There, you can choose between NTSC and PAL. It s on your TV depending on what setting you need.

  Check this box!

• Satellite L750D - no video output HDMI on TV external

  I have a L750D Satellite and a SyncMaster Smart TV

  I want to connect my laptop to the TV with an HDMI cable.

  When connected, my laptop detects the TV and it can create an extended desktop, but the TV says no signal.

  I tested the TV with another laptop and it works fine.

  I deleted the display driver and was able to get some videos on television but the color was bad and the option of extending has been disabled. In addition to this, I was unable to change my screen resolution.

  I installed the latest drivers provided by Toshiba which is dated 05/09/2011. Same problem, no signal.

  Any suggestions on a fix?
  There latest video drivers that I can download?
  AMD offers I go here for the drivers.

  Any help is appreciated.

  Hello

  I assume that you have installed Win 7. Right?

  > I installed the latest drivers provided by Toshiba which is dated 05/09/2011
  There is a new display driver released on 13/04/12 [AMD display driver v8.911.6 Windows 7 - 64 bit: http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 6463 & selSh ortMod = null & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 81347 & OSI D = 30 & driverLanguage = 42]

  Install this one.

  In addition, you need to install other tools such as Toshiba Value added Package, AMD display tool, ATI Driver Sound as well as driver Conexant audio and other.
  Then you should be able to use the FN + F5 to switch to the external video output

• Cannot find my Satellite L350 - 10 H - external full HD video output

  Hello everyone.

  I have a problem with my satellite L350 - 10: when I try to join a second external monitor in full HD.
  Actually Im only able to duplicate my laptop with the same resolution (1440 x 900) display.

  I cannot set a Full HD resolution for my Samsung external monitor system.
  I don't think that can be a limitation of the Chipset because I can do that with all my laptop older, I have at home.
  Now the strange thing is that when I try to search for a driver on the Toshiba site, my model just do not exist!

  I put the serial number and the website doesn't recognize the model, and then in the list, this model do not exist.
  It is: * TOSHIBA SATELLITE L350 - 10 H *-WINDOWS VISTA HOME PREMIUM operating system

  Someone also has this model? How can I reach a full hd monitor?

  Hello

  First of all, if you take a glance on the European Toshiab driver page, then you will notice that the driver search engine does not contain the sub model numbers but series numbers this means that you need to check the model number and then could find the right drivers.

  As far as I know the laptop Satellite L350 - 10 H belongs to the series of PSLD0E.
  You can find the drivers for this laptop if you would choose L350 PSLD0E.
  Easy. Isn t it?

  Now, back to your video output;
  As far as I know there is a Mobile Intel GL960 Express Chipset.
  I have the same chipset and I can use the external monitor perfectly.
  But I installed the Intel graphics driver actually the driver preinstalled on my laptop didn t contain some resolutions
  That's why I recommend the Intel page and download and install the driver for the Mobile Intel GL960 chipset.

  After the new reboot, you should check if you can choose the resolution.

  Welcome them

• HP Pavilion Elite HPE-400Y no video output.

  Hello

  I have a HP Pavilion Elite HPE-400Y computer that I had stored (unplugged) in a bedroom closet bedroom for almost a year.  It was working fine when I put it in storage.

  This past weekend, I wanted to use, so I plugged in and connected to an analog VGA monitor well known on the integrated motherboard video VGA analogue connector.  When I turned on, there is no video on the monitor.  I searched the HP support site and found a statement that said "built into the graphics card or the card PCI Express x 16 slot are usable at once; they are not usable at the same time. "This computer came with a 5450 PCI express X 16 video card installed.

  However, the 5450 PCI express X 16 video card only has a digital DVI and I wanted to use a loose analog VGA monitor.  So I powered it turned off and physically removed the 5450 PCI express X 16 video card.  Then I unplugged the power cord and removed the CMOS battery for a few minutes.  Then I replaced the battery and applied again to power.

  I still do not get all analog VGA video out of the motherboard, not even the BIOS messages it is first energized.

  I also tried to integrated edge connector with a DVI equipped, monitor.  Still, there is no video output.

  So I removed the power and re-installed the 5450 PCI express X 16 video card that has only a DVI connector.  I connected to a monitor DVI equipped and applied again to power.  There is still no video output was two well-known instructors.

  When I turn on the computer, the fan power works, processor and fans of casing run, the blue led on the switch is lit and not blinking.  The Green LED on the motherboard is on.  The Green orange and activity led Ethernet link light are on.  There are no beeps.  I can hear the hard drive starts to work.  I have no video output.

  I use a HP USB keyboard and a USB mouse.  The red LED at the bottom of the mouse is not on.  The shift lock and lock lights number do not light when you press the corresponding key.

  This computer has spent more time of storage that it has been used.  It worked even when stored in a bedroom closet in bedroom.  I checked all the wire connections on the motherboard, with no improvement.

  I would like any suggestions to get this working of the computer.  I wonder if the motherboard has somehow that went wrong.

  Thank you for your help.

  Hello Big Dave,

  Thank you for answering my question / problem.

  I am aware that I can not use an analog VGA connection on the motherboard for a digital DVI input on my LCD monitor and vice versa.  I tried two different montors both analog and digital connections on the motherboard.  I tried to communicate clearly, but I guess that I don't have.

  It is unimportant, now that I've found that HP recognizes that my computer model had a drawing or a manufacturing defect that causes the exact symptoms I am having.  There is here a link to HPs extended warranty program that describes the patterns and symptoms:

  http://support.HP.com/us-en/document/c03199423

• HP Envy 700 - 056. needs of s-video output

  problem: output s-video necessary on this HP Envy machine 700-056

  any suggestions? for example a PCI card with s-video output?

  Hello

  Looking to capture input-output video or simply?

  S-Video graphics cards are pretty much out of manufacturing.  Search for a 9500 GT from NVIDIA if you want to output.  MS Windows 8 shows compatibility with the 9500 GT from NVIDIA.  There are several models of 9500 GT listed as compatible.

• Some of my F keys on my laptop no longer work. Fixing of the F keys would be great, but at least it is another way to switch the video output?

  Original title: screen toggle main F

  Some of my F keys on my laptop no longer work. Therefore, I can't turn my screen to another monitor (IE. TV.)  Fixing of the F keys would be great, but at least it is another way to switch the video output?

  Hello

  Have you made changes on the computer before this problem?

  Step 1: Check if you are able to use on-screen keyboard function keys and send back the same.

  Step 2: The following article can help you in the selection of the display.

  How to configure and use multiple monitors in Windows XP
  http://support.Microsoft.com/kb/307873

• Video output Vista professional S has stopped working

  I use a s video cable to the back of my PC to my home theater receiver. The video output was previously, but stopped. I always receive sound but it is via a separate coaxial digital cable. I tried other sources in the entrance of the receiver box and winning photo through them isn't a problem with the receiver box. Any suggestions on what may have caused this?

  Hi gc1971,

  Thank you for writing to Microsoft answers Community Forums.

  1. first of all, check that the s-video cable is correctly.

  2. open the "display settings" in your Vista computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  3. make sure the TV is set to the s-video input.

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  You can also click on the link for more information about connecting TV to your computer

  Connect your computer to a TV

  http://windowshelp.Microsoft.com/Windows/en-us/help/2a2cde13-B60C-4F2F-b9da-4a433cc51ca91033.mspx

  Note: Make sure that your display card drivers are updated to the latest version available.

  Given that this issue has started recently, you can also try to do a system restore to a point at the TV-out worked very well.

  To restore the operating system to an earlier point in time, follow these steps:

  Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  In the System Restore dialog box, click on choose a different restore point and then click Next.

  In the list of restore points, click a restore point created before you started having the problem, and then click Next.

  Click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Click on the link below for more information on restoring the system

  System Restore: frequently asked questions

  http://windowshelp.Microsoft.com/Windows/en-us/help/517d3b8e-3379-46C1-B479-05b30d6fb3f01033.mspx

  I hope this helps.

  Let us know if you need more assistance.

  Kind regards.

  Nicolas Mathieu

  Visit our Microsoft answers feedback Forum and let us know what you think.