Over Pro 8600 black line vertically when printing from charger only

Similar Questions

• HP Officejet Pro 8600 - black lines when copying, colored scanning lines

  Hello

  I have a HP Officejet Pro 8600. When I try to copy from glass, copy of ADF, I get black lines going the length of the pages. Whenver I scan, once more, the glass or ADF I get lines colored, ranging from the length of the analysis. I called HP customer service and the representative told me clean the glass and part inside of the ADF, but the problem still remains. No idea if this is a common problem? More important still, how fix it.

  Do a hard rest on the printer. Let the printer and unplug the power cord. In doing so, it will remove the lines.

  When a solution is found, please indicate the position that solves your problem.

  If I have solved your problem, please do not hesitate to provide laurels and make sure that you mark this thread as provided solution!
  Although I work for HP, my messages and responses are my own opinion and not of HP

  Valerie, printer Agent

• Office Jet Pro 8600: Black Line on my 8600 Pro JO

  Im having the same problem as many have had over the years. I was getting several lines back when I scanned and copied files (not when you printing from the computer, seems to only happen when I use the feed. I did what others said and it disconnected a surge protector and left it unplugged for two hours. After, lines of light disappeared but a dark one is still there. Ive cleaned the rollers or at least tried. How to hide the car for him give a good clean, if that's what continues. Thank you.

  The document here can help solve the black lines to scan using the ADF on your HP Officejet Pro 8600 Plus.  From my experience this is almost always caused by a specification on the thin glass on the side left which is used for scanning using the ADF.  Cleaning of this area as described in the above document should solve the problem.  If the initial cleanup does not resolve the problem, it can help to shine a bright flashlight almost parallel to the glass.  For a line on the left side of the printed page, the place will be toward the front of the printer, if the line is on the right side of the document, it must correspond to a specification to the rear of the printer.

• HP Officejet Pro 8600 missing some bullets when printing

  HP Officejet Pro 8600 for young or skips lines especially bullets when printing.  This isn't a problem of ink.

  The documents that are printed look fine except some lines especially bullets Miss.  Always the same lines/bullets Miss.

  I tried printing from Win XP, 7 and 8 - all have the same problem and the same senses are missing.  The print view looks very good.

  This happens when you print items from the internet.  I use Chrome on all computers.

  I have the latest software, drivers and firmware.

  Copy the information in Word 2007 prints without problem I printed documents pasted unchanged IE. no change, the format or the police.

  Print a PDF file has no problem.

  I've had the printer for 5 months.  The computers are the same during this period.

  I only noticed this problem in the last few weeks - after print a recipe and trying to follow, I noticed lack of bullets a receipt detailed ingredients.

  I have unplugged the printer and plugged back in - the problem persists.

  Please help with this frustrating problem.

  OK fine and yes I think it's a matter of Google Chrome as well. Let me know your results when you get a chance.

  Enjoy the updates!

• HP Officejet 8040: White line, do not print, vertically when printing from HP Officejet 8040 all in one.

  The white line appears when I print. This has nothing to do with the scan or copy.

  It's about everything that I print and sound always vertical and in the same place.  The Interior of the 8040 seems pretty locked. Not much to go and see what it could be at this place in the printer. I ran the vacuum cleaner at least 5 times and the alignment of 3 times. Help, please.

  

  The problem you see may be caused by a spot on the MICR band.  You can clean the Strip as shown in the here document coding.  Be aware that the coding Strip is fragile and there are fine lines, printed on the Strip that are essential to the proper functioning of the printer.  Be very gently when cleaning of the band, if you're too vigirous band (and printer) will be damaged.

• HP Officejet Pro 8600 - computer gives error when printing

  I use a computer acer laptop with Windows 8.1.

  My HP Officejet Pro 8600 has a month or 2 without printing because a (then all) of my ink cartridges were empty.  Sometimes I tried to print something forget it, and I would like to get a notice of this ink had to be replaced.

  Last week I replace the cartridges, I had the "Thank you for installing authentic HP ink" pop up on my computer, but I still cannot print.  I get a box pop up at the top right of my screen which indicates the printing error.  No other information is given on what is the error.  All I can find says that the printer works normally.

  I ran, I print head cleaning and it printed a nice test page.  I was able to scan a document to my laptop, so I know that they can communicate with each other.

  Although my clients appreciate getting electronic reports, a paper copy must always be sent.

  Any help would be greatly appreciated.

  Hi, try to run the HP Print & Scan Doctor program. (link)

• HP Officejet Pro 8600: HP Officejet Pro 8600 cut header/footer when printing duplex

  Hey guys, frustrating problem slowing of my work, appreciate anyone who takes the time to volunteer expertise.

  Print single sided, my Word template prints very well. Select "print on both sides", "flip long edge ' and the footer no longer appears in the preview before printing (or printing) more the header is visible only half (and half printed).  Microsoft have no idea (when did ever right?).

  0.75 from the top header

  0.35 bottom footer

  (NB. the two characters 100% on single-sided and about two weeks, both printed fine on double-sided also). Date: July 15, 2015

  Hello again @Matt_Roberts,

  Thanks for getting back to me!

  If you have been able to print double-sided with no problems before using the same printer and the computer, it is unlikely that the machine itself has suddenly become incapable.

  What I think, is that it has something to do with the driver on your computer. Windows 8 has an annoying habit to install multiple instances of the driver for your printer. For example, even if you have installed the printer with the complete HP software, because the operating system can see the wireless printer, it can automatically install a driver from Windows update as well.

  So here's what I suggest we try. Check your printer for several "HP Officejet 8600" icons file.

  1. From your desktop, right of slide to unlock bar charms, or press Win key + C on your keyboard.
  2. Select settings in the bar on the right.
  3. Select Control Panel
  4. Under hardware and sound, select devices and printers.

  We will remove all software and start over. Right-click on each icon that you see for your 8600 (even if there is only one) and select the device you want to delete or remove.

  Once the printer has been deleted. Restart your computer. Then, download and run the HP printer installation wizard. It will automatically detect your product and install the latest driver available from HP package.

  Hope this helps! Fingers crossed.

  

• Office jet pro 8600 how default to black ink only when printing from my ipad

  Is it possible to set an option to print the black ink only when printing from my Ipad 2?
  When I use the print icon the only option that shows is double page. I would like to be able to print in black only.
  I can set this option when you print from my pc...

  Hello

  AirPrint does not support black ink only printing, however the HP ePrint app allows it.

  Note that the option is available only for documents (for example Office, PDF, Web pages and emails files), but not for the Photo files.

  You can find the steps to obtain and use the application in the document below:

  http://support.HP.com/us-en/document/c01616126

• cant WiFi connection HP Officejet Pro 8600 e-all-in-one printer to internet

  I can't get WiFi HP Officejet Pro 8600 e-all-in-one printer connect to internet... at least I think that's the problem. I followed all the instructions on the HP print and Scan doctor as well as solve problems of failure to install HP. My router is working fine for everything else and I entered the router the static address for the printer.  It seems that my printer thinks it's connected to my WiFi (Ihave WPS it several times), but when I type there nothing appears in my IE IP address. My router does not see the printer either. I have the latest driver installed on my computer. I suspect that this may be a router problem: new Asus Double 450 Mbps N Router router (dual - band, but it appears my router uses the 2.4 Hz band to connect with WPS). Windows 7 64.

  Any help is appreciated!

  Hello NRHII,

  Welcome to the HP Forums!

  I understand that you are unable to connect the Officejet 8600 via a wireless connection. I will do my best to help you! I would recommend power cycling the router, the printer and the computer:

  (1) turn off your printer
  (2) unplug the power cord at the back of the router
  (3) restart your computer
  (4) wait less than 60 seconds, reconnect the power cord to the router
  (5) turn the printer, wait for the computer to turn on

  The wireless light blinking on your printer? If so, please reconnect the wireless on your printer using the Wireless Setup Wizard: (this information is declared here.)

  1. On the touch screen of the printer, press the right arrow key ( ) to display the second navigation screen.
  2. Tap the Installer icon ( ).
  3. Tap network , tap the wireless configuration wizard , and then press continue . The printer looking for available networks.
  4. Tap the name of your network and then press OK .
  5. If you are prompted, enter the password for the network, and then press OK . The printer connects to the network.

• HP Officejet Pro 8600 e-all-in-one printer - N911a (cannot control the size of the item being analyzed).

  Hi all

  HP Officejet Pro 8600 e-all-in-one printer-N911a, XP operating system. It's all new today and I'm very aware of this new stuff. (I'm older)

  My old Scanner from HP (HP Scanjet G 4010) let me resize my photos or obituaries that I put in a genealogy program. When you try to analyze recent articles in my program, in that I have a small image to the left of the page with the rest of a page 8 x 11 white.

  Is it possible to implement on this 8600 or am I missing something?  Any help or ideas appreciated.

  Thank you

  Glen

  Hi oorwill44,

  Welcome to the Forums of HP Support! I understand that you are not able to control the size of the scan, you make your HP Officejet Pro 8600. How did you install the software for your computer that is running Windows XP? How do you scan, you scan the front of the printer, or you use the HP software on the computer?

  Please take a look here: how Scan: Windows XP

  I hope this helps, let me know if you have any questions.

  Thank you

• Office Jet Pro 8600: photographic paper Miss Feed print a half or quarter page

  I am trying to print photos, using HP and photographic paper inks.   Print only hafl or quarter-page, waste.  Cannot find listed anywhere problem.  Printer test page came out OK

  Hello @WrenJ

  Thanks for posting on the HP Forums!

  I should be able to provide suggestions to try to help with the 8600 Officejet and printing photos.  You said that is not printing the entire page.  This occurs when printing from a specific program or all programs?  You have the full features of HP software and drivers installed for the Officejet 8600?

  Here is a document for changing the settings to print in Windows 7 to ensure that the parameters are properly changed for the specific print job.  If you print from Adobe Photoshop or another program then I suggest you save the image as a. JPEG and trying to print from the Windows Photo Viewer.

  If you still experience the problem I recommend uninstalling and reinstalling the HP software.

  To uninstall the HP software, click here: uninstall the HP software

  To download the software for Officejet 8600 click here: driver and software complete features Officejet 8600

  Please post back and let me know if this worked for you!

• Printing blank pages when printing from Word 2007, WordPad and Notepad, print well other programs

  Weird printing problem

  Good, in Windows Vista and using a printer HP Deskjet 645c with the updated driver, here's the weirdness:

  When printing from Word 2007, Wordpad and Notepad, the sheet through the printer appear in print, but no printing actually takes place. Same for the two existing documents and those newly created. On the other hand, everything prints normally IE8, Firefox and Adobe Reader. Reinstalled the printer driver and also to delete the Word data key in the registry. No love. Automated ran, troubleshooting of MS, but still no love because he found no problem. Someone at - it a good idea? Seems there must be something in common between Word, Wordpad and Notepad, which I suppose are at least somewhat in the code, or perhaps in the way they approach the printer driver.

  Hi TNCharlie,

  (1) I want to clarify if you arejust I try to print the text or insertion of objects into Word and WordPad?

  Fonts and graphics damaged can cause printing problems in Word/WordPad

  (2) using a wireless printer?

  Check to see if it makes a difference if connected.

  Step 1: This test in word

  1. open a new blank document in Word.

  2. on the first line of the document, type the following text:

  = Rand (10)

  3. press ENTER. This inserts 10 paragraphs of the sample text.

  4. try to print the document.

  5. If the document prints correctly, replace it with another font or insert a clip art image, a table, or a drawn object

  Step 2: Don't know if you have tried this fixit, please run the fixit available in the link below and check if that makes a difference

  Problems printing and printing errors
  http://support.Microsoft.com/GP/printing_problems/en-us

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit ourMicrosoft answers feedback Forum and let us know what you think

• folds of 7612-printer Officejet 11 x 17 Paper 3 "from the top when printing from my computer

  Name of product-Officejet 7612.  Operating system - OS X - Yosemite (10.10.1) for my desktop and OS X (10.6.8) for my laptop.  Problem when printing from a Mac machine in the Officejet 7612 on paper 11 x 17, it will always create a mountain/valley fold all the way across the top of the sheet about 3 "from the top.  The folds will be straight through.  Whether it's origami, it would be the perfect machine.

  When I print from the control panel of the printer (for example a printing of print quality, or something www.hpeprint.com like news or some other print it will print properly with no fold either.)

  It seems as if this in case of instructions from the computer to the printer to print, he gets in a hurry to get the document creating the folds, but when it comes to the machine itself, he picks up the paper gently.

  Any thoughts?

  Hi @Bodija ,

  I see that you have problems when printing on 11 x 17 size paper of Yosemite, but you can print the thin material and ePrint test page. I will definitely do my best to help you.

  When you print from the computer, you can print on letter-sized paper or are you just had the problem with the paper 11 x 17?

  Here is a document to clean the rolls of paper to see if that will help.

  A "Paper jam" error displays on the e-all-in-one printer large Format HP Officejet series 7610.

  Go to Solution 5: clean the rolls of paper.

  Using the full feature software drivers?

  Series 7610 Wide Format e-all-in-one-HP Officejet full feature software and drivers.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet 7612)
  
  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  If you still have problems with it is software related, try the following steps.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try to print again.

  How the name of the printer was placed in printers and Scanners?

  If you need help, let me know.

  Have a wonderful day!
  Thank you.

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• OfficeJet pro 8600 black vertical lines of print when copying

  I got a new of OfficeJet Pro 8600 a couple of weeks, and it worked fine until today, when I tried to copy something. I can always print from my pc and scan without problem, but when I try to copy a document (if I load it into the tray or put it on the scanner) the page comes out covered with black vertical lines of different sizes. It seems that this isn't the ink or the scanner since I can print from my pc and analysis very well.

  Help, please!

  This unit is plugged into a wall outlet directly? If this isn't the case, then try to connect the unit to a wall outlet directly.

  The 8600 Officejet Pro has built in the surge protector and double this feature may cause some problems.

  Also, try to reset the printer hard:
  * Unplug the unit while the printer is on
  Disconnect the other end of the power cable from the wall socket direct
  * Wait 30 seconds
  * Plug the unit to the top

  Let me know if it helps.