Overlay/opacity problem?

Hello

I can't with 'borders' perceptible compositions existing within a main Composition.

I have created 3 distinct flare compositions and brought the main composition (sky). I reduced the size/scale of flare and placed them in different places on the screen. However, they have noticeable "borders". I played a bit with opacity and where changed in order of hierarchy, lights are placed in the composition but it makes no difference.

I have attached a jpeg image to illustrate the problem.

Can someone advise?

Screen Shot 2015-12-22 at 12.19.12.png

I have to differ with Dave and Mylenium on this problem. You have a Catch 22 with the standard lens Flair. The size of flair is calculated according to the size of the layer. Lens flair extend not also beyond the boundaries of the layer. If creating a solid that is 5 times the size of your computer and scale down to 20% is adapt the computer and you apply lens flair, the size of the lens flair will be exactly the same as a lens flair applied do a solid which is the size of the model and the scale to 100%. There is no work around that will not solve this problem because the flair of lens is calculated based on the size of the layer and the flair of the lens will not extend beyond the boundaries of the layer. More layer, the greater the flair of the lens.

COMP 1 is the default lens flair applied to a layer 5 times the size of the model and scaling to fit, Comp 2 is the default lens flair applied to a solid that is the same size as the model and 100%. They are the same size.

Growth limits will not work with the flair of the lens. Before dialing or nesting that a huge model will not work either because the flair of the lens will not extend beyond the boundaries of the layer, and if you do the largest layer then the lens flair will get bigger.

The only real solution is to control the size of the lens with the brightness flair and check the position with the centre of Flair. You need to rethink your approach or create your lens flair using a different technique.

Tags: After Effects

Similar Questions

  • opacity problems

    A layer with a 50% opacity has the same appearance as a layer to 50% of filling?

    Yes, Brett N... They must be the same, but since were not, I knew something was wrong. I think I found the issue and hope that this discussion is available to help someone in the future.

    Under PS color settings I had "Blend RGB colors using Gamma" Checked. It has been verified according to a suggestion of our professional lab.

  • opacity problem

    Hello Forum.

    IM lowering the opacity of a layer that has an object and its affecting all other layers like well.also the text will drive.

    Why would he do that?

    Hello peter.

    I went to Edit > space fusion of transparencies, and when I changed the RGB color mode, it has worked like I wanted to.in CMYK mode all this had a different aspect of opacity.

    Thank you.

  • Modal window Blues

    I read through the posts here and also tried to follow the blog here: http://monkeyonoracle.blogspot.com/2010/07/modal-pop-up-with-dynamic-actions.html

    I think I have the hard part covered, i.e. Add jQuery selector attirbutes, trapping events, etc. So I'm able to get the code from the dialog box when you click the desired column (in fact, ago conditional logic if only certain lines trigger the jQuery selector). It all works very well.

    The problem is that when the window of the modal dialog box is open, the iFrame is always empty. Here is the code (for the most part plagiarized) to the pop-up window of the modal window:
    /* prevent default behavior on click */
var e = this.browserEvent;
e.preventDefault();
/* Trigger JQuery UI dialog */
var horizontalPadding = 30;
var verticalPadding = 30;
$('<iframe id="modalDialog" src="http://www.google.com" />').dialog({
   title: "Select Margining Method",
   autoOpen: true,
   width: 700,
   height: 300,
   modal: true,
   close: function(event, ui) {apex.event.trigger('#P2_AFTER_MODAL','select',''); $(this).remove();},
   overlay: {
       opacity: 0.5,
       background: "black"}
}).width(700 - horizontalPadding).height(300 - verticalPadding);
return false; 
    In the beginning, I created another window of APEX with a report about this and put this link. I then, as you can see above, coded hard to google just to see if it was something on my page or my session or other. However, even if this returns an empty iFrame. It's that get made when the previous code is run:
    <iframe id="modalDialog" src="http://www.google.com" style="width: 670px; min-height: 0px; height: 270px; " class="ui-dialog-content ui-widget-content">
</iframe>
    The strangest part is that when I look at the HTML code in the development of Chrome within the iFrame tag tools, I see a node named #document. In #document, I see pairs (empty) to:
    <HTML>
   <HEAD></HEAD>
   <BODY></BODY>
</HTML>
    However, since they are all empty Chrome may just not bother to copy them to the Clipboard.

    In any case, no one knows why the page does not appear in the window of the modal dialog box?

    Thank you

    -Joe

    Published by: Joe Upshaw on 8 August 2012 14:06

    Joe,

    I tried your code but had no problem, except for google.com because I can't access to my apex environment. Pages in the same application were no problem however.
    Have you checked the safety of application of attributes and if "Browser Security"--> 'Embed in executives' is set to 'Permit of same origin' or 'allow '?
    Also, if you want modal features, did you look at the Page Modal Skillbuilder plugin, which does most of the Voodoo for you?

  • region of refresh on the page parent after closing popup inframe

    Hello

    I have parent page with several regions, and one of the reports is related popup to another page using inframe. All these are works fine but now iam trying to a parent region partially regenerate after closing the window contextual inframe, I tried apex.submit (region1) but it does not work? no idea how can I update this after the closure of the window popup?

    Best regards and thank you

    Hi Gor_Mahia,

    Gor_Mahia wrote:

    Here are the details,

    application ID = 46268

    page ID = 13

    demo123/demo123

    proj2010 = workspace

    Use the links in the second column IR

    Once again thanks for your time.

    Check your application now. The interactive report is refreshing on the closure of the modal dialog box using the method of dynamic, such action described in the blog post:

    Monkey on Oracle: Modal popup with dynamic Actions

    Here are the changes:

    • Edited your action dynamic and value:

    In the section "Advanced":

    Scope of the event: Dynamics

    In 'true Actions:

    Action edited your "run the Javascript Code" and "Code" to modified:

    From:

    /* prevent default behavior on click */
var e = this.browserEvent;
e.preventDefault();
/* Trigger JQuery UI dialog */
var horizontalPadding = 30;
var verticalPadding = 30;
$('
    Image HD shows upward. The slideshow of the text plays fine. But the black boxes at the top disappears.
    Is there a solution to this? I worked on it for two days and really he leads me into the wall!
    			 
    They call them overlays for a reason. You can't put static content above an overlay.
    

    Convert them to MSS to play once automatically.
    

    Bob

  • Is this a bug? Resizing of content with an opacity box problems.

    I was wondering if this is a bug? I tried to get a box behind a text box to resize according to the amount of content that is located in an area of text above it. It works fine when the box located below the text box is set to 100% opacity. However when I adjust the box below for less than 100% opacity stop box resize with the text box. My questions are is this a bug or intended, and if it's a bug is there a workaround or will be fixed soon?

    Hello

    Thank you for bringing this place. We were able to reproduce the problem, and it was recorded as a Bug.

    It seems to be a problem when opacity is reduced in the toolbar at the top.

    However, to work around the problem, I would suggest you use the opacity under the filler panel option.

    To do this, you will need to select the rectangle in the background, and then click filler panel that appears on the right side. And you can change the opacity of there value.

    Please take a look at the screenshot below that might help:

    When the opacity value is passed to this filler panel, the property of the rectangle to resize with text is preserved.

    We recorded a bug for the issue and I hope that it will be fixed in future versions of Adobe Muse.

    My apologies for the inconvenience.

    Kind regards

    Sachin

  • Problem getting Gradient Overlay settings making GetObject of PutObject known

    Hi people,

    I'm trying to get multicolored and parameters multitranspatent for chassis (stroke, contour) and gradient overlay, layer descriptor.

    So far, I have had no problem to get settings for stroke (list of colors), list of transparency, color and transparency stops, its values RGB places and backgrounds.

    To my knowledge, it must be the same for the gradient overlay, but I'm stuck in one place.

    Here is the hierarchy I found of Getter (I gave the names to the descriptors to relieve me read the code)

    //============================================================

    sPSActionDescriptor-> Make (& descLAYER);

    sPSActionDescriptor-> Make (& descEFFECTS);

    sPSActionDescriptor-> Make (& descGRADIENT_OVERLAY);

    sPSActionDescriptor-> Make (& descGRAD_FILL);

    It should contain lists for color stop

    //=============================================================

    However, I don't find a way to get the descGRADIENT_OVERLAY of descEFFECTS.

    Corresponding getter PutObject looks like:

    error = sPSActionDescriptor-> PutObject(descEFFECTS,'GrFl','GrFl',descGRADIENT_OVERLAY);


    I had found the "GrFl' navigation headers is synonymous with enumGradientFill:


    #define enumGradientFill 'GrFl' / / typeFrameFill OF the LIBRARY

    Isuppose think I shoul use a conversion method. I tried something like

    error = sPSActionControl-> StringIDToTypeID ('GrFl', & runtimeClassID);

    but I suck.  Am I missing something. When I worked with edge effect, this was the situation: Descriptor hierarchy

    //==============================================================

    sPSActionDescriptor-> Make (& descLAYER);

    sPSActionDescriptor-> Make (& descEFFECTS);

    sPSActionDescriptor-> Make (& descSTROKE);

    sPSActionDescriptor-> Make (& descGRAD_FILL);


    It has lists for the stages of color

    //======================================================================

    Here descSTROKE had descriptor I called descGRAD_FILL that contain multicolored and multitransparency information. But I had no problem pulling on his class being classFrameFX key keyFrameFX so following code works.

    error = sPSActionDescriptor-> HasKey (descEFFECTS, keyFrameFX and hasKey);

    If (error) goto returnError;

    If (hasKey)

    {

    error = sPSActionControl-> StringIDToTypeID ("classFrameFX", & runtimeClassID);

    If (error) goto returnError;

    error = sPSActionDescriptor-> GetObject (descEFFECTS, keyFrameFX, & runtimeClassID, & descSTROKE);

    If (error) goto returnError;

    }


    Big problem boils down to the question of HOW TRANSFORMER PutObject line

    error = sPSActionDescriptor-> PutObject(descEFFECTS,'GrFl','GrFl',descGRADIENT_OVERLAY);


    At the GetObject line.

    Thanks in advance for any help you can give me.

    Kind regards

    Momir Zecevic


    Of course getter just war.

    I was just mistake somewhere, but here computer how it works:

    error = sPSActionControl-> StringIDToTypeID ('GrFl', & runtimeClassID);

    error = sPSActionControl-> StringIDToTypeID ('GrFl', & runtimeKeyID);

    error = sPSActionDescriptor-> GetObject (descEFFECTS, runtimeKeyID, & runtimeClassID, & descGRADIENT_OVERLAY);

    And voila, works.

    Feel so stupid.

    Kind regards

    Momir

Maybe you are looking for

  • Download Airport utility

    Tried to download the Airport 6.3.1 utility for mac, but get this: "Airport utility cannot be installed to this disk. Th version of Mac OS X on this volume is not supported. "I have MAC OS X 10.11.6

  • Headphones plugged, but the speakers are still playing sound - HP ENVY M7 - J020DX

    had plgged earphones in, but again his spell of the speakers. Ive got pregnant by default everything, and Yes, they are completely plugged in its really annoying...

  • Cannot run recovery CD on satellite because of the hacker attack

    I would be grateful for any help on this. My equium has been hacked and the hacker has created an environment where: I can't uninstall nortonI can't write to cdI can't change the registry and many other ailments that not allowing the recovery disc in

  • Number of processor

    Hello again, I met another confusing problem again... On this link, it says that my computer "Supports Intel Smithfield Pentium D processors with bus front end 2 x 1 MB L2 cache and 800 MHz. http://www-307.IBM.com/PC/support/site.WSS/document.do?lndo

  • How can I get malware, Rootkit.MBRWhistler.B (Boot_image) removed from the computer?

    Every time you start computer, F-Secure antivirus protection (provided by the Charter cable) informs that a virus was found and removed. History of virus removal indicates the malware is, Rootkit.MBRWhistlerB (Boot_image).  Even if the opinion indcat