P10-304 Satellitensystem showing 2 CPUs

Similar Questions

• Malfunctioning USB P10-304

  I have P10 - 304, well, it was workin fine until a few days back when printing, the printer showed a communication error msg thought I tried to turn it on n off it did not work, I tried to uninstall n then reinstall the printer but on installation, the computer does not recognize the printer if the printer can be installed on other comp. I tried another printer , but it will not be recognized, Device Manager shows the usb ports are ok, but the computer doesn't always recognize I try to install new hardware usb port.
  What is bad guy

  Hello

  I guess you tried defferent USB ports? I mean connect the printer to the other port/s you have on the PC?
  Same problem?
  If Yes, then please try something simpler, like a keyboard or a mouse USB. Always the same problem? If Yes, then it's a hardware problem, but to be sure, pick up the PC. !!! Note Please! : all data will be lost!
  If no to closest to you more top question, is your drawing also power USB printer? Maybe you should try using a HUB adapter-based between?
  If no to question in the foreground, then try a different USB port and check the other advice in my text above.

  Good luck

  Tom

• Satellite P10-304: replacing a WLan card - can I the same WiFi chip?

  Hi all

  got a satellite P10-304 of a companion here.
  He said the free thread never worked on it and hes had it years and someone else has already looked at and changed the TNA wireless card.

  Basically, she acts only as the wireless switch does not work and it remains permanently off the coast, although the drivers install correctly and map also shows ok. Simply disconnected.

  Now, I thought, okay, I'll take a look because I'm pretty good on the old hardware. Has taken apart and this you know, switch has been bent and not up. I handed the place, checked the switch and stop positions with a multimeter to check the switch worked and he was doing his job perfectly.

  Now it still doesn't.
  I guess it is now due to the fact that as I said, the map has been changed since its origin to a processor intel pro jobby.

  My question is, I'm right, do I just need to get the same card that was originally in it. I assumed that when the switch is set correct return, that I solved it.

  Hello

  The WiFi card must be activated bu switching the switch TO the position (the LED must illuminate) and in addition, you should choose the WLan antenna using the FN + F8 key combination.

  Please check this!

  Notes; go to Device Manager-> properties-> Advanced tab Wlan card
  There you can check if the WiFi is enabled as well.

• Satellite P10-304 - update Windows 7 problem

  I have a Satellite P10 304 to 2003 which has Windows XP, but I need to update for obvious reasons. I bought a copy of Windows 7 (32 bit) and installed without any installation problem, however I can't update Windows.

  I reinstalled, deleted the hard drive and reinstalled again. Tried the stop and start the Windows Update utility.
  Downloaded the stand-alone Windows Update.

  Updated the BIOS to V2.0 and downloaded the Toshiba Service Station application (who says no update is necessary).
  All this without success.

  My hopes were raised when I saw that the Station Service for Windows 7 32 bit software was available for the P10 304 but I am now at a loss.

  Anyone know if this laptop can be upgraded to Windows 7 and how to get updates of work?

  Help is welcome.

  Peter

  I'm sure that installation of Windows 7 update problems are not specific to Toshiba problems even if you use the Toshiba laptop.

  From my point of few, you should check the Microsoft support pages to find the solution.
  For example this:
  http://Windows.Microsoft.com/en-us/w...#1TC=Windows-7

  Just a tip: I had some problems in the past to install updates because of the antirust software. He locked the installation of some essential updates and after you disable temporal, updates could be installed...
  Missing Service Packs might concern the single installation of patches.

• Recovery disk does not work on Satellite Pro P10-304

  A few days ago my Satellite P10-304 is not start, so I used recovery CD and got the machine works like new.
  Yesterday it wouldn't boot.
  Some thing on an ethernet cable unplugged error message, so I tried recovery CD because there is no data to lose.
  It won't work, to come up with an error message "GDISK (E) no such fixed disk - 1" then "error number 11030, invalid destination drive.

  Can anyone help me to get it booted/recovered please?
  I'm not fussed on something special for this old laptop, just a second computer for the kids to do their homework on.

  Hmm. sounds like a HARD drive failure
  Have you checked if the HARD drive has been recognized in the BIOS?

  > Something on an Ethernet cable unplugged error message.
  I guess you get an error PXE - E61 starting at startup.
  This message appears if the laptop tries to boot from LAN.

  This could happen if there are no other sources of boot as HARD drive, etc.

• Satellite P10-304 - replacement of the drop-down list

  Will SR-2512 in a P10-304 work.

  Hello

  Call the partner in your country. They can give you more information about the compatibility of the discs.

• Satellite P10-304-DVD-ROM/CD-RW questions!

  Hello world

  I own one of the original computers Satellite P10-304, which has a DVD-ROM/CD-RW combo drive. For these last months, we have one or two problems with that. It was a little skittish in which CD it reads, but in the last days he almost completely stopped read correctly (audio/data) CD / DVDs. He doesn't seem to know they are there. However, the Player opens and runs well, as if it were playing the CD, but nothing happens on the PC.

  Curiously, I then looked on the list of the system, and the DVD-ROM/CD-RW driver had an excalamation mark. Even more curiously, the pilot was called TOSIICA! DWD something or other, when I'm sure it should have been DVD TOSHIBA etc.etc. Following the instructions, I uninstalled and then tried to reinstall, but it does not appear now when I try to add hardware.

  Confusing.

  I would be very grateful if anyone has any suggestions?

  See you soon,.

  Ian.

  Hello

  It looks like a car damage registry entry.
  But that is only my suggestion. The other possibility is broken (lens calibration problem) by car.
  You say that you have already removed the drive from the Device Manager, but the peut t OS recognizes the drive again. Well, in this case one of the possibilities is to use the System Restore tool or retrieve the device with the recovery CD.
  But if the drive is broken recovery procedure doesn t help. In this case, only the replacement of the drive can solve this problem.

• Satellite P10-304 combo DVD drive replacement

  I need to know what combo dvd/cd-rw are compatible with my p10-304. It came with a sd-r2412, but it does not read DVDs more. I'm trying to get a replacement, but I must be sure that it will fit and work. can someone give me a hand? Thank you

  [Edited by: admin January 22 06 09:03]

  Hello

  You can find compatible readers on this site
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/options_and_accessories_search.jsp?z=16&service=EU & selOptionCategory = 4699

  for example the modular Bay DVD-R/RW Drive (PA3295E-1DV2)

  Good bye

• P10 - 304 - no display after wake up

  Hello
  I sometimes have a display problem with my P10-304. Panel display won't wake up
  After waking up from hibernation or suspend-to-RAM. Blue led power is on, HD and CPU fans are working well.

  I have preinstalled, xp of origin with v6.4.10.4485 nvidia display drivers) and upgrading the bios (1, 90 - WIN)

  In this case, I have to turn off the machine and _delete hibernate data_ to start windows.

  What should I check to fix this upward?

  Greetings
  Jarek.

  Hello

  Well, it s strange. It's not easy to say what can be the problem.
  It would be very interesting to know if the problem will occur if you retrieve the BONES with the recovery CD Toshiba delivered.
  Did you use a Toshiba video driver or a driver nVidia graphics?

  You must use the graphics driver Toshiba because this driver is designed for the use of the laptop and it s something different as a driver of nVidia.

  Good bye

• P10-304: matter of procedure strange recovery

  I'm a technician + certified PC a customer brought the laptop (Satellite P10-304) to me after she had taken this back to the place she bought. They said she needed a new hard drive. I inserted the DVD of recovery for the A60 (is the only recovery DVD she brought with her) and image the laptop when he went at the start would go to loading windows, he would crawl to take 30 minutes to start. Something is happening with the hard disk transfer rate.

  I think it's the hard drive controller OR there is some chipset driver not get loaded from the recovery DVD as it's the fake recovery DVDs. I used Windows XP Home OEM CD as well, but the same problem occurred.
  Any suggestions would be helpful.

  Hello

  In my opinion, you are trying to recover the device with a bad recovery CD.
  As you said you have a recovery for a Toshiba A60 laptop CD and the unit is a Satellite P10-304. These are two different workbooks and to retrieve the device you need exactly the right recovery CD.

  I suggest contacting the after-sales Service of Toshiba partner. Here, you can order the medium right of recovery.

  Good bye

• Satellite P10-304 - memory upgrade

  Hello

  could someone tell me where to buy additional memory for my laptop?
  It has 256 MB. At the time were reading autour is better and possible to just buy a 1 GB and remove 256 and put in the same dwelling.

  Thank you any help welcomed.

  Hello

  Satellite P10-304 supports the * 200-pin PC2700 (333 Mhz) DDR SODIMM * modules.

  It seems that it would be possible to upgrade to 2 GB RAM max and that's why you can use 2 x 1 GB modules.

  Welcome them

• Satellite P10-304 - need driver for "multimedia audio controller".

  Hello

  I had to reinstall the operating system on laptop Satellite P10-304 PSP10E ORCJM-EN, but I do not have the drivers for the hardware. I can't find the drivers for the "multimedia audio controller" on the Toshiba site:
  NES http://UK.Computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=UK&mode=allMachi & action = search & teddProduct = 526 & selShortMod = 356

  All suggestions will be welcome.

  Thank you very much
  Mark

  Hello Mark

  I guess what you're missing is driver sound.
  Please also check document Setup Instructions and install all the stuff after this installation order. It is very important.

• Satellite P10-304 and recovery procedure

  Hi all
  I have a problem with my Toshiba Satellite P10-304, the problem is that I can't plant recover, it does not boot up to windows xp, so I need to recover it, in any case. When I put in the recovery of 1/2 disc it works fine. recovery comes to ask...

  '1... recover the entire hard disk.
  2... mode Recovery expert
  3... exit ".

  I choose the number one, once I kicked a a similar scree comes up saying...

  "Attention!"
  The contents of the hard drive should be removed
  1... Cotuninue
  2 Cancel... ".

  Yet once I press number one to continue. Now once I have this button the screen goes black and a message reading...

  ' GDISK (E) no Suck disk fixed - 1.
  Status
  GDISK (E) No. suck fixed disk - 1"

  Teh screen turns off again and toshiba screen flashes for less than a second and goes off again, with the words

  "!!!!! ERROR!

  Press a key to continue. "

  Once I press any key, the screen remains black with this message now on the monitor.

  "Date: Fri Aug 1 12:51:36 2005.
  Number of error: (11030)
  Message: Invalid Destination drive

  -------------------------------------
  "[PgUp] / [PgDn] [ESC].

  Once I Press esc, this screen comes up and it's been I can't go any further.

  X:\ >

  X:\ >

  It comes to have I'm stuck and can't get that much. I do not think that when recover what it is supposed to go that far, but there is, y at - it another way to reset the laptop may be a reset button on one of the panels under somewere I'm missing or batch should be thrown in the trash. Any help would be greatly appreciated and well thanks. A response as soon as possible would be great, thanks in advance.

  James

  I am sorry to say that it resembles a discarded HARD drive.

  You can boot from a floppy drive and see the HARD drive at all. If you can, then I suggest trying to format the drive in this way and then tries again.

  If this isn't the case, then you should get a new drive.

• Satellite P10-304: bad sectors on the disk - how to fix?

  My drive HARD drive bad sectors developed and replacement needs, does anyone know how to do this?

  My model is a P10-304.

  In addition, Windows will not start upward in my old HDD because of bad sectors and the drive is protected by Norton and back, does anyone know how to bypass or disable round trip

  Hello

  I found these tips how to disable the Norto Go Back tool.
  You can uninstall it from your computer, disable GoBack to your laptop press 'space' GoBack screen button and select the option "disable" GoBack.

  Follow these steps:
  1. reboot your computer.
  2. when the Norton GoBack splash screen appears, press the SPACEBAR.
  3. in the Norton GoBack boot menu, click on disable.
  A message informs you that disable Norton GoBack erases history and you will not be able to run the hard drive or hard disk restore advanced restore until Norton GoBack is turned back on.
  4. click on Yes.
  5. click on continue.
  Your computer restarts automatically, and Norton GoBack is off
  After restarting the laptop, I recommend once again using the following key: CTRL + ALT + G.
  Immediately press on and hold the keys Ctrl + Alt + G after restarting the laptop you. A message you giving the possibility to force the removal of GoBack master boot record. Press F to force the removal of GoBack master boot record.

  If failure of keys Ctrl + Alt + G in the first time then try this again for three or four times until you get the prompt to remove the master boot record of GoBack.
  Finally, restart the computer.

  To fix bad sectors on the HARD drive, you could boot from the XP CD to use the console of "repair".
  And then use the CHKDSK /p command to repair the bad sectors.

  Good luck

• USB 160GB HDD - Satellite P10-304 doesn't see 127.9 GB

  Can someone help please, I bought a new 160 GB Seagate Momentus HDD.

  I put in a USB enclosure and connected, but when I go to Paragon Disk Copy he can see a disc unformatted 127.9 GB.

  If I right click on 'My Computer' and use 'Manage', it says I have a unknown 128 GB drive connected.

  I updated my BIOS to the latest available from Toshiba (2, 00 - WIN) dated 27/04/06 (on the Toshiba site "last updated on 27/04/06"). However, in the information system, he says: "BIOS Version/Date TOSHIBA V2.00, 28/12/2004", correct version but date looks old? on the site Web of Toshiba the last BIOS (V1.60) is listed as: last modification 15/12/05?

  Does anyone know if the Bios allows more than 128 GB of disks?

  If the answer is no, what are my options? If I go ahead and copy the disk it will work as usual, but as a 128 MB drive? Later if a new Bios is published, allowing disks of large capacity will be the full space available or should I take a disc image, reformat the hard disk and then copy the image (only have a record of this great would mean that I have to use another PC to achieve this).

  Its a real pain, ideas or thoughts?

  Many thanks Tony

  Laptop: P10-304 running XP Home.

  Hello

  I m not 100% sure if it has something to do with the BIOS.
  I think that it s simply a matter of calculation.
  HDD dealers calculate with 1000 and they must calculate with 1024. But the difference is still to oversized

  Please also check the size of the HARD drive in the other sense. After the fixing of the external HARD drive, you could right click on the HARD drive and check the properties.

  BIOS:
  Y, please read the more info section. You'll find info that the 1.60 BIOS update is only for the satellite P10 series models that contain "PSP13E" or "PSP16E" in the model number and version 2.0 of the BIOS update is only for the satellite P10 series models that contain "PSP10E" in the model number.