P158sa Pavilion: Pavilion of the p158sa screen replacement

Similar Questions

• 2014 Pavilion pass the recovery screen

  I have a HP Pavilion model 17-e019dx running Windows 8. Whenever I turn it on, it stops with a blue screen that says:

  Recovery

  Your PC needs to be repaired

  A required device is not connected or is not accessible

  0xc000000f error code

  When I press on enter to 'Try again' it back with:

  File:\Windows\System32\winload.efi above the above error code.

  I tried the recovery and after a LOT of waiting time, it always comes back to the above screen. I also ran all the diagnostics that are available on the laptop and all come back normal. I don't have the disks or the original documents that I "received this laptop as a 'gift/curse' of another frustrated individual who he bought earlier this year. It seems to be under warranty through 12/14, but I have no purchase receipts, so I don't think I can take it anywhere. It is, however, saved for me.

  Help, please!

  You can order your support page recovery media. Scroll through the list of software drivers to see the possibility of ordering:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=6627485

  BTW-check status guaranteed here:

  http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us&LC=en & LC = in

• HP Pavilion Notebook 15-N031sa: screen replacement which model

  I want to make sure I buy the right led display for my model.  I have some difficuly to find the product that any help would be appreciated.

  Hello

  Please use part number on page 96 of the Guide Service and Maintenance on the link following (the first):

  http://support.HP.com/us-en/product/HP-Pavilion-15-notebook-PC-series/5401225/model/6521594/manuals

  Kind regards.

• HP Pavilion p6823w: the HP screen resolution

  So I just recently installed the preview of Windows 10 and I ended up getting very large screens as usual. So I used some old drivers when I was looking for them for Windows 7. I installed all the drivers that I kept and time stand, auto screen resized itself and it was 1600 x 900, which is the size of my screen. Overview of Windows 10 being in beta, there was a lot of bug so I decided to remove 10 Windows and install Windows 8.1. When I tried to use the same drivers, the screen remained the same at 1280 x 1024.

  How does this work again? Auto, Windows 7, Windows 8 and Windows 10 works resize screen, but not the Windows 8.1? WIndows 8 and Windows 8.1 do not have the same modules? How that even make any sense. And what makes it all even funnier how will Windows 10 preview (Beta) can pick up and automatic resizing with the same drivers in Windows 7 and Windows 8?

  Well. Might as well scratch or close this message. My computer no longer works because I wanted to was to resize the screen resolution and now my BIOS killed my computer. Sigh...

• display fades, but in the second screen it works correctly

  display fades but when we display the display to the second monitor it works properly...

  Thank you.

  If you happen to have some technical skills, then you can buy a replacement screen and replace it yourself. You can find a replacement screen online for less than $100.00. Use a search engine like Google or Bing with HP g6-2304tx as the search keywords.

  It is on the track only inexpensive to fix the problem. If you have done by a PC repair shop, it will be more expensive. Try Insidemylaptop.com to get the LCD screen replacement instructions.

• How do you get and replace the hp pavilion 3CR3050D6K LCD flat screen 20-b010

  Pavilion 20-B010 screen has been damaged and is cracked. I would like to get a replacement manual or instructions on execution of Assembly and disassembly.

  Hello @VB_Richard,

  I understand that you need to replace the LCD screen on your desktop HP Pavilion 20 - b010 all-in-One PC and you would like a manual or instructions on how to perform the installation.  The number of product of the screen, you'll need is 652255-001, which is the 20 "TN N-glare W - LED Non - ZBD Sam 250nits. With regard to the steps needed to install it I am you provide those below:

  Before you begin: remove the back cover and bezel.

  Removal of LCD Panel Kit

  1. place the entire middle frame on a smooth flat surface.

  

  2 detach the connector from the LCD backlight to the LCD.

  

  3. remove the four screws that attach the LCD Panel to the Central frame - the screws will be on the high or low or the sides of the Board according to the manufacturer of Panel. Each manufacturer will have its own stencils for the location of the screw holes.

  

  4. partially lift the bottom of the middle frame off the LCD screen.

  

  5. unplug the LVDS cable from the Control Panel before completely up the average frame off the LCD screen.

  

  Replacement LCD Panel Kit

  1. to install a new LCD Panel, align the top of the middle frame on the LCD Panel.

  

  2. connect the LVDS cable to the LCD screen.

  

  3. lower the average frame completely on the LCD screen.

  

  4. replace the four screws on the sides or the top and bottom of the Panel to fix the Panel on the Central frame. Use the location of the screws to the stencil for the manufacturer of the Panel that you are installing.

  

  5. replace the backlight of the LCD screen connector.

  

  If the new LCD Panel comes from a different manufacturer that the old LCD Panel, remove old backlight converter card connector and install the new connector on the card. The jury has stencils indicating the location of the connector backlight by manufacturer.  Configure the jumpers on the card of converter to match the Panel manufacturers. Painted stencil on the chassis of the Middle table configuration of rider by the manufacturer.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• HP Pavilion Elite HPE-555sc desktop PC - will not get past the first screen of the BIOS

  Hello

  Since yesterday my PC, a HP Pavilion Elite HPE-555sc desktop computer, does not start. It freezes at the start screen "HP".

  It only allows me to enter the BIOS and it meets no other entry.

  I thought it might be the motherboard.

  Is anyone know about this problem? Is it already happened?

  It comes to my PC

  My PC was already supposed to be an upgrade, but I would like to know if this can be corrected before I create a new.

  I knew no more probably is not on warranty.

  Thank you.

  Hello

  Which is usually caused by a corrupt BIOS. You can clear the CMOS. Sometimes, but not always, which solves the problem.

  It is of the card mother reference web page.

  Look for the clear instructions of the CMOS. The instructions do not specify this, but it is best to remove the RTC battery before performing the clear procedure of CMOS.

  While the RTC battery is out and the PC unplugged, press and hold the power switch of the PC for about 15 seconds. When you replace the RTC dough the + must be facing upwards.

  Best regards

  ERICO

• HP Pavilion dv6: System recoovery after replacing the HD because of the disk hard 301 error

  I have problems with the original of my HP Pavilion dv6 PC hard drive portable. I get an alert (SMART disk error 301) every time that I reboot, but I can still load my Windows 7.

  I just bought a new hard drive (SSD SATA3), but I would like to recover my original OS using my license key.

  How can I do? Should I create a partition on the new disk (D, copy the contents of my RECOVERY disc and use Esc + F11 after reboot?) Do I need a recovery CD/DVD? In this case, can I create one of my system?

  Thanks in advance.

  Hello
  
  Drive smart error 301 indicated fall drive hard/failed hard drives
  
  If you have recovery disks, no need for product key, insert the disc after replaced by the new fair SSD & insert the recovery disks to reinstall everything, including the recovery partition.
  
  You can also order HP recovery discs
  
  You must ensure that the size of the SSD is equal to or greater than the size of the previous HARD drive to perform successfully the recovery discs recovery.
  
  If you have not created recovery disks, you can create one - http://support.hp.com/us-en/document/c01867418
  
  Back up all your personal data now first.
  
  Thank you

• HP Pavilion g7: gel g7 HP Pavilion at the game and video, loading screens

  So, he started like 3 months ago when I got my laptop back from repairs. I wanted to play a game (Splinter Cell: Conviction) via Steam. I turned on the game and saw the intro, but with no sound. Then, it turned out to be black. I waited 2 minutes before it loads. He loaded, fortunately. But then, when I started to play the game, it happens again. A mission has been loading and I could see the game loading icon, but for 3 minutes. When the game started, it was OK. But then, in a cutscene, it happened again. I saw the picture of the main protagonist, but no video or sound. This has happened in each cutscene and loading screen. Even when I'm dead in the game, it happened. Almost all of my games on Steam to do this (Splinter Cell: Conviction, Batman: AA, Injustice). On the other hand, there are few games that don't do this (the origins of Batman Arkham, Splinter Cell: Blacklist, Batman: Arkham City).

  Two months earlier, the problem to grow. Even videos on Youtube and all the other video portals are the same thing. I see the screen on a video and the videos on the right, but the video does not play. I have to wait 2 minutes until it loads. Every single video. He then starts, plays and plays. But, when I stop in the middle (anywhere) and then want to watch further, the loading is here again. It takes again like 2-3 minutes.

  But the worst is the multiplayer games. I have it be based on Payday: The Heist. Let's say I made a lobby for other people to participate. Then I press "start the game". The loading screen strikes again. All the players in my lobby connection let go me. When I join a game of others, I play like a minute, and then it happens again. It stucks (I can hear the soundtrack) and then told me that I lost the connection to the host. Some games do not have this (Minecraft, Portal 2), but some do (Payday: The Heist, Batman: Arkham origins). There is no connection problems, my brother has a PC and its internet connection in these games is perfect.

  When I want to open a file, it's OK. Opening files is not a problem.

  When I tried to think about it, I thought that the problem is in the sound. Thus, in Splinter Cell: Conviction, I tried something. Every time there is a loading screen, I turned the sound on my laptop. The screen was completely normal, loading took only 5 seconds. I was very happy, but when I tried a second time, it did not work. And third, fourth, fifth...

  Currently, the problem gets bigger. I can't read some of my favorite games of co - op and etc. The loading is very annoying. I'll be very happy if a solution will be found.

  Sorry for my English, I am from Czech Republic.

  Hi @Thomas_Ber ,

  Thank you for visiting the Forums HP's Support and welcome. I saw your question about your HP Pavilion Notebook g7 and the problem with the speed. Here's a document on improving your system.

  Make sure that all updates are completed within the control panel or click the Windows key and start typing the laptop settings, then go to update.

  You could try a refresh of Windows 8. Please read the entire document before performing. This could restore all the settings on the PC.

  Here is a link to faq support with steam. They might have a solution to this problem.

  Please let me know how it goes.

  Thank you.

• Get the Green Screen when I play videos on my HP Pavilion 23 Windows 8

  Hello

  during playback of videos on my HP Pavilion 23 running windows 8 all of a sudden the video screen goes green and the only way to get a video to play again is to restart the computer. It's a new computer and it has happened as we got it. all updates are set to automatic so that we do not understand what is happening! It makes us crazy! lol any help would be so appreciated!

  Thank you!

  Hello

  Try a new installation of the plugin flash/ActiveX as follows.

  First, download the Flash uninstall utility on the link below and save it in your downloads folder.

  Flash Player Uninstaller.

  Once the download is complete, close all the browser windows, open your downloads folder and run the program uninstaller.  After this has completed, restart the computer.

  When windows has reloaded, download and install the latest version of Adobe Flash. Note: You can deselect the option to include McAfee Security Scan Plus before downloading.

  When the installation is complete, restart the computer.

  ***************************************************************************

  If the above is not correct the problem, try the following.

  First of all, download and run the uninstall program of Shockwave on the link below.

  http://fpdownload.Macromedia.com/Get/Shockwave/Uninstall/Win/sw_uninstaller.exe

  After this has completed, restart the computer.

  When windows has completely recharged, download and install the latest version of Shockwave on the following link.

  http://get.Adobe.com/Shockwave/

  Once again, after the installation, restart the computer.

  Kind regards

  DP - K

• How to fix the black screen of my hp pavilion g6

  How to fix the black screen of my hp pavilion g6

  Try a hard reset, works sometimes. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall only the power cord for the first start.

  4. turn on

• How can I fix lines horizontal randomly and glitter for the LCD screens for HP Pavilion dv5 Vista?

  How can I correct random lines horizontal and glitter for the LCD screens for windows vista HP Pavilion dv5? Only, it happens randomly and can get all a few minutes at a time every few hours. The entire screen white and black and horizontal lines will appear during the flickering on the half top of the screen only. Nothing else changes. My sound is immutable, and none of my screens change the size or location. However, they may appear up and down during the flashing. Can someone give me an idea of what is wrong? I looked on Google for possible corrections, but most of them seem to be for refresh rate and I don't have a notch for this and can't change it according to the steps they offer.

  Read my initial response on what it takes to please.

  "See if this helps you:

  These lines indicate corruption graphics driver or lack of graphic material.

  Go to the HP Web site > Search a drivers and download article > search your laptop model number > your operating system > drivers for it: either video / graphic / Chipset (according to the wording it) > download and install the drivers.

  http://WWW8.HP.com/us/en/support-drivers.html

  If that fixed it, it seems to me be a problem of graphic material.

  Because it's a laptop; If under warranty, contact HP.

  If is not under warranty, contact a repair shop, local. »

  See you soon.

• HP MS235 pavilion in a single reboot after the start screen guard

  Hi all.

  can anyone help wih this problem I have with my computer hp pavilion MS235 that keeps just reboot after the splash screen.

  What happens is that the system began to hang at start up. It would take about an hour to get to the Welcome screen. could not do anything even not to make a recovery, so I put the drive in another machine and he made a new installation. but since then it just keeps restarting to the start screen. I ran all kinds chech af, but nothing works.  I'm on win 7 x 64.

  Please can someone help! Thank you.

  Concerning

  Dave.

  Start at this page: http://support.hp.com/us-en/document/bph07143

  Or here: http://www.computersurgeons.com/SearchProducts.aspx?sbt=pavilion%20MS235&bkm=Results#Results

• HP pavilion g6-1016ex the computer screen does not.

  HP pavilion g6-1016ex the computer screen does not. but when I connect to the pc display by display moniter on-site port, pc display moniter works. How can recover from this problem... ?

  Have you tried pressing F4 or Fn + F4 to switch between the views?

  If it still does not work, the following document can help you identify the problem: display problems.

• HP pavilion monitor go black after the splash screen

  When I start my pc, the splash screen appears on the monitor, but after that he's black. I can hit one of the f keys to take me to the start page or diagnosis, but when I change the path of startup and press on save, then enter it just go to the screen black I have also hit the f9 key to go to the diagnostics page and run the hp diagnostic tool edge who said past when I try to return to the screen black new go! at first I thought it was a graphics card problem so I replaced the former with a same something new, I also tried plugging three different locations on the graphics card, I started with the dvi connector with an adapter on my cable even not, it will display the start page, just go s strait to no signal , so I went on the VGA slot that has been, I can get to the start screen, finally I tried the hdmi port and again, I can get to the start screen, but then it GB Black I removed the ram and cleaned and was going to try to go to Detroit from the motherboard to the screen, but I got scared when I saw the black cap with the words DO NOT REMOVE this topic! I tried 2 different monitors just to eliminate this probability but now I am just confused ideas would be appreciated!

  Hi lostone64,

  The fact that you can see the splash screens makes me think that this isn't the video port or motherboard. My hunch is it could be a hard drive failure, operating system error, or problem of display settings. You never see a Windows screen until it goes black?

  Have you tested the hard drive or made sure it appears in the BIOS?