P2314T, tactile function no longer works

Similar Questions

• HP Envy 100: Scan function no longer works on my printer

  Recently moved locations and had to re set my PC. Since then the scan function no longer works. I get the error message 'Scanner reported an error', 'Impossible to log on to the device. I've uninstalled and reinstalled the drivers from HP, I checked the internet connections and all work. Actually had a lot of problems earlier with the printer and the scanner re wireless connections but hoped to have finally overcome these.

  Is not part of the problem, but a real complaint about what is the purpose of wireless devices when they never work as well as the peripheral ethernet connected, someone really need to get it sorted .

  Can someone help me please to get my back operational system. I surgent now as it is on paternity leave and need to get some issues administrative doen at home in the next few days.

  Thank you very much

  Hello HevnLgh.

  The problem is now fixed and the printer and the scanner work. Don't know exactly what corretced it if it took time for the steps previously mentioned to kick but I also tried to use the wi - fi protected installation set-up that exists on the printer and somewhere between all these steps, the connection between the pC and the printer has been restored.

  My very kind thank you for your efforts. I click the congratulations and accept it as a solution.

• my shortcut function no longer works

  I have an Inspiron (dell), the windows vista pc. I used to have a feature called function "create shortcut". All I would do is make a right click on a page link / I want on my desktop at the start, and a box would pop up asking me "do you want to put this link (ex: www.amazon.com) on your desktop? Then I click Yes, and then he... Don't know what happened, but it no longer works.   Does anyone know how to get it back? It was so easy and useful.

  Thank you!

  Hi MarshaGriffin,

  ·         What happens when you try to create the shortcut?

  ·         Did you made recent changes on the computer?

  ·         What version of IE are you using?

  I suggest you try the methods mentioned below and check if it helps.

  Method 1: No detection system file checker (SFC).

  http://support.Microsoft.com/kb/929833

  Method 2: Try to create a new user account profile and check.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem is resolved by the above method, then you might have a corrupt user profile. Follow the article provided to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• JavaScript function no longer works on Playbook

  I have an index.html page that is linked to several other pages html (back and forth). They have all of the following functions in them. It worked perfectly, when I had 4 pages [got the javascript popups and browser open link], but as I added more pages (now 7), this kind of has stopped working.  My index and the pages loads properly but when I click on the button/image to open the browser, the application crashes, no pop ups + no browser. When I tried the pages on my webbrowser on laptop, I get my pop up windows...

  I'm fairly positive that a 1 Ghz Duo processor Playbook can handle a MB 6 App...

  Anyone know what I'm doing wrong?

  

  UH... my email client no longer works so I restarted my playbook.
  Strangely, after restarting my app work now...

• Satellite U300 - keyboard shortcut functions no longer work

  Recently, I had a problem with Norton 360 and used their online support, where they take control of your computer. The agent was able to disable certain functions, including functions such as Fn + F4 - hibernation access key and also to disable the drop-down menu at the top of the screen indicating the functions of the keys when the slider is at the top of the screen, or you make a Fn + function Fnumber.

  Although turn it on to Norton, I've been several times, they seem unable to reactivate these functions.

  No idea how to do that, anyone?

  Hey Buddy,

  I put t know what support does exactly Norton, but in your case I would reinstall Toshiba Value Package added. This package controls the keys FN and Flash cards that you can see if you press a FN key.

  The latest version, which you can download here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  I hope it works for you! :)

• GUI volume and function no longer works

  Volume GUI does not show, probably because of the function keys to control volume does not not (Fn + F11/F12)

  It stopped working after the installation of the hate iTunes

  Windows 7 operating system

  Is there a way to restore this function as it is very useful?

  Apparently iTunes had deleted ATKACPI driver and hotkey-based utilities. Today restored and functional.

• Paste my function no longer works. Turn it off. I can't right click and paste or control c. What should I do?

  I was able to copy / paste with no problems until today. None of the functions copy or paste work no matter how I use them. If I pointed out and use the C command or if I right click it shows copy but will not display the function paste. V control does nothing. nothing shows up on the clip board either, so it is really a problem copying. Thank you

  Hello

  Does the problem occur with all programs?

  If the problem occurs with all programs, and then follow these steps:

  
  Step 1: scan Run SFC (System File Checker) on your computer.

  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
  b. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  c. at the command prompt, type the following command and press ENTER:
  sfc/scannow

  For more information, please refer to this Knowledge Base article: How to use the tool troubleshooting missing or corrupted System File Checker system files on Windows Vista or Windows 7

  
  Step 2: check if the problem occurs in a new user account.

  Refer to this article for help:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

• EventListener ('click', function () no longer works

  I worked on a script that has hundreds of radio buttons in groups, and the groups are on the tabs.  They have worked very well and work all my event listeners.  I even created for the loops to reduce the number of listeners, I need but I need 1 loop for each group, so I think I'm overwhelming Illustrator because they have suddenly stopped working together.

  Is there a limit to how many event listeners can have?  Also is there a limit of line of code because I'm already up to 1406 line and I've got to way to go, I do a script to put an end to all the scripts for the company I work for has all the options and can do whatever they want in the same place.  I would post all the code, but it continues to launch error m5 and I don't know if its part of the issue of the names or if it's just for a long time.

  How about you, you start with a table at the beginning of your building UI, like: radio buttons var = [];

  And, whenever you make a new button to add to any location, you can set the button to this table.  Once completed, the window of your user interface, you can now go through your custom table and not by the window UI elements.

• On WRT54G2 v1 wireless function no longer works

  Only the wired PC works.  Two other laptops cannot take up any signal from the router.

  I tried flashing the new FW, reset, reboot, electric bicycle.  The router does not even appear on any PC.

  I put this router with WPA 3 months ago and worked perfectly... now deceased.

  What more to do?

  Finally managed to do work this way:

  1. On a preliminary step, has updated the firmware downloaded from this site
  2. Connected to the router via a wired LAN cable
  3. Connected to the configuration @ 192.168.1.1 page
  4. Went to one of the tabs to reset to factory settings
  5. Changed the password by default SSID and administration, WPA security and password adding value
  6. Starting my PC with the wireless turned off
  7. Opened at the request of wireless connection of PC and delete the old router connection profile
  8. Turned on the application of wireless connection on the PC
  9. Immediately saw the router THAT SSID is listed again in networks 'Beach '.
  10. A through the configuration screens to specify the security type, and password
  11. Bingo!  I'm back on.

  Better I can understand, something happened that has corrupted the configuration of the router and prevented him from associating with the PC wireless or assignment of IP addresses.  The reset settings this clears up and me got home.  Both my laptop connect now perfectly once again, quickly and @ 18Mbps!

• Windows Visa Home Premium functions no longer work after installing Norton System Works.

  • I installed Norton System Works. Almost immediately, I have encountered the following problems:
  • 1. it takes anywhere from 3 to 5 times to use the mouse to block a section for copy/cut.
  • 2 Microsoft Office Professional stops when I open a product and click on the Windows symbol in the upper left corner, rather than give me a drop-down list.
  • 3. when the angle by using Microsoft Outlook and open an email, if I click on the 'x' in the upper right, instead of close the e-mail, he leaves the program.
  • Reinstall Windows Visa Home Premium will solve these issues?
  "Bobby1728" wrote in message news: 7337c24e-0c 57-4919-88b 9 - 49dc21c72196...
  a. I installed Norton System Works. Almost immediately, I met the
  following issues:
  .....
  > g.. Reinstall Windows Visa Home Premium will solve these issues?
  >
   
  Unlikely - but removing Norton might! (followed by a restoration of the system back to)
  before you install)
  NSW is now the most overbloated, more... software again
  invented by Symantec.
   
  Before installing Norton - you made sure that your system is in a
  State to receive? -Uninstalled your old AV and run the removal
  program that is almost always necessary before installing a new AV?
   
  Have you had any problems before you install it? -have you had an asset
  infection before installing it?
   
  --
  Noel
   
   

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC

• Upgrade to version 1.2, phone function no longer works correctly...

  After the upgrade to version 1.2, when I call or receive calls, the speaker is completely silent until and unless I chose the speaker. I tried to turn the appliance works again, but still the same problem. It's a huge problem, as you can imagine: the phone works as a phone more...

  Just find it once again, this is what has been proposed.

  To fix it, simply pause the music sheet in the headphones, re-enable music. Then pull on the helmet. He will start working properly

  Original post has some other suggestions as well

  http://forums.Palm.com/Palm/board/message?board.ID=webossoftware&thread.ID=220&view=by_date_ascending&page=8

  Message edited by tagz on 09/30/2009 12:05 AM

• Tactile feature no longer works

  I have a X230t that is only a few days old.  As I was using the computer tonight, all of a sudden the touch screen has stopped responding to the entrance of my fingers or the stylus.

  Anyone had a similar experience?  All proposed remedies?

  I would like to begin by updating the drivers here:

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS003260

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS015012

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS029033

  For later use, all your drivers are located here:

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&docid=HT073834

  Let us know if that helps.

• Paste function central to the mouse no longer works after update

  I think that FireFox has been updated last night. Since then my central block the mouse function no longer works.
  I have not installed any addons or changed settings either.

  I want to talk to: subject: config > middlemouse.paste = true

  I tried it switch etc but nothing I can do, it takes. Any ideas?

  This problem has disappeared from Windows updated itself.

• Function to find Keeper blackBerry Smartphone password no longer works

  I've just upgraded to a BlackBerry Curve and was very happy when my password keeper is just this, accepted my old password and my data base. However, the search function no longer works. If I type A, is not said no password found, although I see a lot as soon as I open it. So, how one of them and password keeper works find function. It's painful, trying to get to those that begin with "Z"!

  Try a simple reboot of the device and check again.

  With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

• My touchpad scroll function does not work in Firefox 4

  4 years Dell Inspiron 1520 with a Synaptics touchpad, running XP. Just downloaded FF4 last night, now discovered that my scrolling on the touchpad function no longer works. It's very irritating. If no fix is available, how to go back to the previous version of FF?

  Try running Firefox in questions to troubleshoot Firefox in Safe Mode. If it works properly in this configuration, then one of your modules is the culprit.

  By the way, I recommend you visit the Plugins check page and update your plugins. You are potentially expose your system to attack with some versions you have installed at the moment. Their update can also solve the problem with your touchpad.

  In case the previous steps do not resolve the problem for you, you can return to the previous version and secure that 3.6.16 as follows.

  1. Go to Download Firefox v3.6.16 and download it to your desktop.
  2. Then go to add/remove programs, scroll down to Mozilla Firefox and remove it, choosing to keep your bookmarks, etc., the customizations (don't tick the box).
  3. Reboot and delete the folder called Mozilla Firefox at this location: C:\Program Files\Mozilla Firefox
  4. Finally, run the downloaded installation file.