P5E - VM HDMI with network card Atheros and ICH9R chipset.

Similar Questions

• ESXi5 with network cards 10 and 2910al-48 HP

  Hello Forum,

  My question is how to configure the vSwitches with 4 uplinks to the HP switch.

  To switch HP network ports are trunked. What do I need to configure something at the vmware?

  concerning

  DEPENDS ON PHYSICAL NETWORK CONFIGURATION IF THE PHYSICAL ETHERCHANNEL SWITCH IS CONFIGURED, THEN ONLY YOU CAN USE THE IP HASH STRATEGY OTHERWISE IF IT IS NOT CONFIGURED, THEN YOU CAN USE THE PORT ID THE BASE POLICY.

• Can I use an adapter of lightning and HDMI with my iPhone cable and connect it to my TV without messing up my AT & T U-verse services?

  Can I use an adapter of lightning and HDMI with my iPhone cable and connect it to my TV without messing up my services AT & T U-Verse?

  Why have something to do with your Uverse services?

• 9174 OR with 2 cards 9233 and 1 card 9234

  I want to use a 9174 OR-DAQ with 2 cards 9233 and 1 card 9234, 9233 card allows us to sample up to 50 kech. / s and the 9233 up to 51.2 kech. / s. Now, we start the sampling at the same time. We work with 12 microphones, four in each card. It does not matter if each card samples at a different pace, we only need the highest possible in all cases. The problem is that we have not found a way to do this with the DAQ 9174 materials. When you have completed a task of sampling, it seems that sampled to 51.2 kech. / s with all cards, even with the 9233. What can we do to accomplish this task? Thank you in advance.

  Hi Luis,.

  You see the expected behavior.  As you have noted, the 9233 has a maximum rate of 50kS/s and the 9234 a maximum rate of 51.2 kech / s but that's only what they are capable of using their internal time base.  The 9233 specifies a max rate using a base of external time of 51.3kS / s.  When you put s and 9234 9233 s in the same spot, DAQmx chooses the fastest time base module (in the 9234 in this case) and he shares with the other modules.  This has the effect of executing your 9233 s to 51.2 kech / s and is located in the module specifications.

  I don't know why you do not want to run run the 9233 s 50kS/s, but if you wanted to you could put them in a separate task without the 9234 and they would use their internal time base to run 50kS/s.

  The other option is to define the basic source of time clock sample and the rate to a base time of one of the 9233 s.  If all the modules have been in the same spot, your 9234 would go then to 50kS/s as well.

• problem with network card with 10 Windows and Fusion

  I can't get my network card to work as I have improved my VM to Windows 10.  It shows that permits and OK in the Windows Device Manager but disabled and cannot be enabled in network connections. This happened with Fusion 7 and continues since I upgraded to Fusion 8.  I reinstalled VMware tools, remove the card and reinstalled in Windows, remove the card and reinstalled in the settings of the Virtual Machine in Fusion.  It happens both in mode 'Share with my Mac' and automatic bypass. Please advise.  Thank you.

  As mentioned in another thread: got back to Windows 7, search, and uninstall a client VPN, re-start at level to Windows 10.  Networking, then worked correctly.

• Extremely slow WRT54G navigation pages @ 192.168.1.1 - this could be a problem with network card?

  Friend of mine is having the problems of Internet connection on his main PC which is hard wired to the router, it is using Comcast cable (18Mbit) and all of a sudden today the speed fell to dialup speeds, literally, however its ONLY this main with the issue of speed pc, there are 2 other computers connected wirelessly to the router, and they run at full speed during the test on speedtest.net

  Solve the problem, I tried bypassing the router and still have the issue of speed, so I can pretty much rule out the router, but as part of my troubleshooting whenever I try to access the router configuration pages via 192.168.1.1 but it is VERY slow to respond.

  For example when hitting enter after typing 192.168.1.1 it takes about 45 seconds to view the router configuration page, and then clicking on any other tabs takes 30-45 seconds longer to respond.

  So my main question with this post, is it possible that its network card went bad? What would cause really slow access to the configuration of the router?

  The PC is under Win 7 Ultimate 32 bit and Ive tried to run the network troubleshooter, uninstalled the network card in Device Manager / reinstalled the drivers but nothing seems to work.

  I also ran Malware Bytes and the analytical results were clean.

  Any ideas appreciated!

  can you 'borrow' a card? This is the only way to be sure, eliminating hours of trial and error procedures. one of the mega electronic stores is a good source, if it solves your problem you keep the card, otherwise there is the option to return

• Windows cannot find network mode safe mode with networking cards?

  Hello.

  When I try to access a Safe Mode with network I can not connect to the Internet, because windows can not find any network adapters. But it is perfectly fine in Normal Mode. I tried to uninstall and reinstall the NICs without success. What can I do? I need help badly.

  Or is it simply not not in safe mode with network and will rather /normal/Mode safe.

  BTW, my laptop is model Vaio series S 2011.

  Thank you very much.

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet in safe mode with network. Please correct me that I misunderstood.

  Please provide us with additional information by answering a few questions below, this will help us better solutions to the problems.

  -Why are you trying to connect to Internet in safe mode with networking?

  -Do you get any error code or error message?

  I doubt that the choices you make in the options of safe mode takes you to the safe mode and the insecure with networking mode.

  Please do the following and check if you are able to boot into safe mode with network.

  a. restart the computer and press the F8 key during reboot, until you get the Advanced startup options.

  b. in the boot advanced options, use the keyboard to select safe mode with network and press ENTER.

  c. This will start the computer in safe mode with network. Once the computer has been started, check if you are able to connect to the Internet.

  For reference:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Please try these steps and if the problem persists, please tell us so that we can help you.

• Re: problem with network card and display

  Hi all

  I recently got Tecra S11 - 11H.

  A few days windows was updating procedure. After restart external monitor connected to dsub connector changed display Resolution 1600 x 1200 (from a native 1920 x 1080). In my frustration, I tried system restore as windows update creates restore points. There were losses of document in the process, but I was NOT able to restore the laptop to the previous state.
  Using the nvidia Control Panel, I get internal resolution of 1920 x 1080 to external monitor ONLY when toshiba lcd is turned off.

  Now, I have 10 seconds delay between http requests. And that is unacceptable. What are my options here? Update includes changes to the firmware? In the cases where I decide to reinstall Windows 7 all over again with recovery disk, which will fix something.

  Please help me!

  Hello

  > Don't update includes changes to the firmware? In the cases where I decide to reinstall win7 all over again with recovery disk, which will fix something

  N ° it includes any firmware changes. Yes, reinstalling windows with the recovery disc will fix your problems as preconfigured values. In Windows, update option, clear *, Install updates automatically *, you can check the updates yourself and choose to install.
  Before beginning a new installation, remove the installed windows updates recently and download a display and a Lan driver of the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] if it solves your problem, you don't need to perform a new installation. If not, do it.

• problem with intel proset & atheros and M30X

  Hello

  I have problem with Intel PROSET. When I opened this program can't do anything just because my Wireless 2200 BG is not be listed in "network components. Moreover in Atheros I'm not able to do anything as well. It can suggest the problem with the driver, but I managed to connect to my friends wireless net. What can be wrong?

  I have my own installation of Win XP SP2 with all drivers and programs of Toshiba tools & utilities. (I had the same problem with recovery of victory)

  Thank you in advance for your help!
  Happy user of T M30X

  Hello

  I guess you have INTEL Wireless Card. After installation of SP2 to check if there is some conflicts in your device manager. You can update driver for the wireless card. It is always good. :)

  As BOB said go to https://eu.computers.toshiba-europe.com (then adapter & download of drivers and downloads).

  It is driver for your Intel (V. 8.0.12.9000W2BG) wireless card. Install it and check is there no conflicts in Device Manager.
  If this is not the case, turn your wireless card and FN + F8 to enable the wireless connection.

  If you re router wireless works correctly and if your WLAN has a name you see now. I know it's sometimes very complicated to establish the connection, but you must try all the options.

  Please let us know if you are creating your successful login.

• Pavilion dv7-6b78us: network card missing and other drivers on HP Pavilion dv7-6b78us Entertainment Notebook PC

  Hello

  I have a problem with this laptop that I got. He had Windows 7 Home Premium (64-bit) and has been reinstalled in Windows 7 Ultimate (32 bit), and reinstall the drivers missing after.

  I found the similar thread that has the same hardware ID, but links to the drivers do not work for me.

  This is hardware ID to the missing drivers-

  Display adapters-

  Standard VGA graphics card

  PCI\VEN_1002 & DEV_6760 & SUBSYS_1659103C & REV_00
  PCI\VEN_1002 & DEV_6760 & SUBSYS_1659103C
  PCI\VEN_1002 & DEV_6760 & CC_030000
  PCI\VEN_1002 & DEV_6760 & CC_0300

  Other devices-

  Ethernet controller
  PCI\VEN_10EC & DEV_8168 & SUBSYS_1659103C & REV_06
  PCI\VEN_10EC & DEV_8168 & SUBSYS_1659103C
  PCI\VEN_10EC & DEV_8168 & CC_020000
  PCI\VEN_10EC & DEV_8168 & CC_0200

  Network controller
  PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086 & REV_00
  PCI\VEN_8086 & DEV_0084 & SUBSYS_13158086
  PCI\VEN_8086 & DEV_0084 & CC_028000
  PCI\VEN_8086 & DEV_0084 & CC_0280

  PCI device
  PCI\VEN_10EC & DEV_5209 & SUBSYS_1659103C & REV_01
  PCI\VEN_10EC & DEV_5209 & SUBSYS_1659103C
  PCI\VEN_10EC & DEV_5209 & CC_FF0000
  PCI\VEN_10EC & DEV_5209 & CC_FF00

  PCI Simple Communications controller
  PCI\VEN_8086 & DEV_1C3A & SUBSYS_1659103C & REV_04
  PCI\VEN_8086 & DEV_1C3A & SUBSYS_1659103C
  PCI\VEN_8086 & DEV_1C3A & CC_078000
  PCI\VEN_8086 & DEV_1C3A & CC_0780

  SM Bus controller
  PCI\VEN_8086 & DEV_1C22 & SUBSYS_1659103C & REV_05
  PCI\VEN_8086 & DEV_1C22 & SUBSYS_1659103C
  PCI\VEN_8086 & DEV_1C22 & CC_0C0500
  PCI\VEN_8086 & DEV_1C22 & CC_0C05

  Controller Universal Serial host
  PCI\VEN_1033 & DEV_0194 & SUBSYS_1658103C & REV_04
  PCI\VEN_1033 & DEV_0194 & SUBSYS_1658103C
  PCI\VEN_1033 & DEV_0194 & CC_0C0330
  PCI\VEN_1033 & DEV_0194 & CC_0C03

  Unknown device
  USB\VID_138A & PID_0018 & REV_0078
  USB\VID_138A & PID_0018

  Unknow device
  ACPI\HPQ0004
  * HPQ0004

  I use another desktop search and post, but I'll be able to use a flashdrive to copy and install to laptop, right?

  Thanks much for any help.

  NataLapa

  Hi there @NataLapa,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP Support and wanted to give you the information you need. I understand that you have a HP Pavilion dv7-6b78us laptop , and you need all the drivers for it.

  There are two ways to get all drivers updated for the HP Pavilion dv7-6b78us Entertainment Notebook PC. You can use the wizard help HP to download all the drivers for your laptop. Or you can use the HP Pavilion dv7-6b78us Entertainment Notebook PC driver web page and choose the drivers you want to download.

  Please follow these troubleshooting steps, re-post and let me know how everything went.

  Thank you!

  Have a great day!

• R5 - 471 T - 71W with wireless card Atheros QCA61x4A unable to reach linkup with Linksys WRT1900AC AC

  Hello, I have laptop Aspire R5 - 471T - 71W with the NIC of the Qualcomm Atheros QCA61x4A wireless. I have the Linksys WRT1900AC wireless router configuration to support the chain of 80 MHz, I have the latest Firmware & drivers for installed devices. Run Win10 pro on the Aspire. Even in the same room that the WRT1900AC router, longs it reached only 802.11n connection speed. How will I know if I'm actually in 802.11ac and Win10 falsely reported my connection speed using the details of the network & sharing Panel as 300Mbps?

  Hello Jordan,.

  Thanks for the pointer... I had two bands with separate SSID. Channels of communication were also in automatic. What I didn't have was the network Mode in the joint framework. Documentation of Linksys seems to be lacking on how these parameters affect the configuration of the WRT1900AC AC speed.

  I am now at 866,3 Mbit/s.

  Thank you for your prompt and accurate diagnosis of the root cause.

  Steven Sutherland

• PROBLEMS WITH NETWORK CARD

  device: hp pavilion g6

  Serial No.: g6t - 1 d 00

  I have re installed windows 7 Home premium 64-bit and now, having problems connecting to the internet

  I tried Device Manager and its exclamatory markson showing yellow

  1. ethernet controller

  2. network controller

  3. PCI device

  4 PCI simple communication controller

  5. SM bus controller...

  Please send the appropriate links for the download...

  Using HP Recovery will return the computer to factory condition... including the OS Windows7 and all the drivers and software HP Recovery partition. Please use the support of HP recovery, you created when you first you computer Configuration. If you create this media, please see DVD - SP1 de Windows 7 64 b + Supp 2 Recovery Kit or contact official HP, via the Portal Support HP's worldwide, to order a support of HP recovery for your computer.

  IF you try to install Windows from a generic Windows 7 installation disc, you need to install a lot of drivers available from the page of CTO Notebook PC drivers HP Pavilion g6t - 1 d 00

  1. Local Area Network (LAN) Driver Realtek

  2. ??? (Please provide the ID window material)?

  3. Realtek card reader driver

  4. Intel Management Engine Interface Driver (MEI)

  5. Intel® Chipset Device Software (INF Update Utility)

  Please message the Windows Device Manager (text only) "Hardware ID" of all remaining missing or unknown devices, as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• SCO UNIXWARE 7.1.1 install vSphere 4 (ESX 4) ERROR problem with network card

  Hello

  I try to install SCO unixware 7.1.1 on vSphere 4.

  Install and configure sco OK after installation OK, but after you configure NIC SCO is dead

  PANIC: Integer zero-divide trap in kernel mode

  When I disconnect the NIC so unixware run OK

  Thank you

  This looks like a known bug of UnixWare.  You must install SCO UnixWare Maintenance Pack 5 before setting up networking.

  Please see the section of the Guest operating system Setup Guide for SCO UnixWare 7.  In particular:

  Note To avoid a kernel panic, install MP5 before performing any configuration network on UnixWare 7.1.1.

• Satellite A30 - what wireless network cards are supported?

  Have a computer Satellite A30 laptop-404, I wonder what kind of card Mini-PCI Wireless would be compatible with my PC?

  Found this one for example.

  Gigabyte GN-WI01GS MINI PCI ADAPT 802. 11B / G BASE of RALINK CHIP SNM

  Anyone who knows what other types could be used?

  Hello

  Hmm, well I've never heard of Gigabyte WLAN cards and I don't know laptops that are equipped with these cards.

  I checked Toshiba Web site and some Satellite A30 models shipped with a card Atheros and Intel WLAN. So, I recommend buying a those manufactures wireless network card.
  For example Wireless LAN Mini PCI card (2, 4 GHz, 802 11 b) PA3212U-3MPC should be compatible.

  Good bye

• HELP Please: problems connecting to Google Chrome or Internet Explorer: think it has to do with my network cards

  My computer works perfectly except that I can't connect to the internet using Google Chrome or Internet Explorer. Internet works fine.  I have another computer that is connected to the same network, and it works fine.  Also my signal strength is optimal. When I try to go on Google Chrome, it says that the web page is unavailable & the reason why is error: 105 (net: ERR_NAME__NOT_RESOLVE) the server is not found.  When I try to use the Internet, I get this message:

  Device is not working properly because Windows cannot load the drivers required for this device (Code 31)
  I've tried everything and looked at other forums. I went into Device Manager and tried to update the driver, but whenever I do it just says that all updates are already made.
  I really feel that my problem has something to do with network cards. When I go to Device Manager and discovered the network adapters 13 different adapters appear. The 1st is Atheros AR5007 802. 11b / g Wireless Adapter and it looks like it works very well but there are 11 different (Microsoft 6to4 adapt #10) (all have different # s, 10,11,12,14,15,16,17,18,20,5,9) there is (NVIDIA nForce Networking Controller)
  I think the problem is with the Microsoft 6to4 adapters because win I right click & then click on PROPERTIES of each adapter says: State of the device, this device is not working properly because windows cannot load the drivers required for this device. (Code 31) So, is to "find solutions", says & when I do that nothing happens, a message flashes on the screen that says: "Could not load driver software" and that windows is looking for information, but nothing ever happens.
  Can some1 please help me! My computer worked fine and both Google Chrome and still worked and then out of the blue it just stoped working. Any information would be very useful

  wisports,
  Thank you for visiting the Microsoft Answers community forum.

  You have found the source of your problems.  You must remove or uninstall, all the cards of 6to4.  Also delete everything that said map Tunnel or card miniport WUN.  Also uninstall or disable, Internet Protocol version 6 (TCP/IPv6) Properties tab on existing network cards.

  Once you have done these things, restart the computer and make sure that the 6to4 adapters does not return.

  Let us know how it works for you.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.