P6-2378 7.1hd audio?

Similar Questions

• Media Player 12 on windows 7 is unable to play sounds on mpg file created using arcsoft total media 3.5

  in question .mpg files use the audio codec of arcsoft. These same files play with sound on wmp 11 Vista ultimate on another machine. Both have total media 3.5 installed.

  These .mpg files also do not play in the computer of windows 7 using win 7 media center or film maker.

  WMP 12 shows that the arcsoft audio codec is installed.

  In addition, some .mpg files created by ArcSoft show no video or audio in wmp 12, but work correctly on vista with wmp 11 system.

  a noticeable difference in technical support for windows media information is the presence of Microsoft MPEG-1hd Audio decoder under the mpeg/dvd filters in the list for wmp11 but not wmp12. I am unable to find this codec for installation.

  any suggestions on how to find sound would be greatly appreciated. Thank you.

  Addendum: other mpg which were extracted independently of Arcsoft files also do not play sound in wmp 12. The property indicates the same audio codec association of arcsoft. Tried to uninstall and install the window media components but no change.

  Thank you!

  I had the same problem one solved it just by setting filter audio decoder arcsoft merit for 0 x 600000 with Gspot.

  JDCR

• Satellite L670-1HD - problem with audio interfaces USB 1.1

  Hello

  I have a Toshiba L670-1HD with an Intel HM55 chipset, and an Intel Core i5 460M processor. I use this machine for my music software and that's why I use different audio interfaces external and USB-MIDI-Controller with build in audio interface like Mixvibes U - Mix Control Pro (http://www.mixvibes.com/content/u-mix-control-pro). These built-in audio interface are connected via USB 1.1. Always when I use this audio interfaces interfaces crash audio internalt - the sound is cracked very hard and there are noises in. The controller of all crashes sometimes too.
  When I use another interface audio as an audio interface Hercules DJ Trim 4 & 6 (http://www.hercules.com/uk/DJ-Music/bdd/p/102/deejay-trim-4-6/), which is a USB 2.0, everything works fine. No crashes, no cracks and no noise.
  You could say now that there is no problem and I should stick to the Hercules interface if it does no problem. The problem is that the Hercules is an audio interface only, there is no controller in it with which I can control my music software.

  I've updated all the drivers from the support page of this site without success. Is there a solution available or the Toshiba knows this subject? Am I the only one having this problem?

  Would be nice if a Toshiba official support employer could respond to this message. But this does not mean that I don't want to read somethng submitted by the user for which an index - all Board/Council/recommendation is welcome.

  Thanks in advance for the help!

  See you soon,.

  Stefan

  Hello Stefan

  In my view, you see the problem from the wrong point of view.
  Toshiba and each laptop manufacturer offer product and hardware and software support. So if there is a general problem with the functionality of the material you are by Toshiba on the right address.

  You use a third party and that you have some problems. Do you really believe Toshiba should support you and help to get this external peripheral work? In my opinion not. On the market, there are thousands of different devices and laptop computer how of the manufacturer must be able to test each of them and offer a solution?
  Something like that is definitely not possible.

  In my opinion, you should communicate with Mixvibes and ask for help. They have the best experience with own product and I presume that they are testing the features on different PC/laptop platforms.
  They should know how the device should work on new laptops with USB 2.0.

  It seems silly now, but Toshiba has nothing to do with it. If you have a general problem with the USB ports and they don t work with different devices that Toshiba should ask for help.

• Pavilion P6-2378: keyboard driver

  Hello, I have just completed an update of Windows 8 and lost the on-screen order of volume that would normally show on the upper left of my office to win 8.  I was wondering if someone could provide me the SoftPack containing the keyboard for my Pavilion P6-2378 Desktop system driver? I already watched all the drivers available, but the keyboard driver wasn't there.  Thank you in advance!

  Hello, I, m you just answer myself (to see and help) that I found the answer to my problem in a previous post.  Most of the credit goes to:

  Dunidar, who said the previous displays the following:

  "I understand as your controls audio keyboard are disabled and you are looking to reactivate without performing all of the computer." You should be able to restore by simply reinstalling your Audio drivers. You can do this by downloading and installing the IDT High Definition Audio Driver for your computer. »

  So I uninstalled the existing driver and reinstalled the original driver of the HP pilot area.  I have also told me on another site to run the following batch program after the installation of the driver and before a reboot:

  off @echo
  departure of kbdhid sc config = request
  output

  This helped my keyboard volume controls and volume screen to work.  The batch program, run before a restart, has also worked to restore the volume on-screen display when the keyboard volume buttons still work.

• How do I receive audio via the DVI port?

  Hello.

  I have a HP Pavilion p6-2378, that I use as a PC Home Theather. The motherboard on this model lacks an HDMI port, which is how the rest of my system connects. I use a HDMI-DVI adapter and video works perfectly, but there is no audio data. Several people told me that the sound signal can transmit through the DVI port. Y at - it a setting or a software that I have to make it work?

  Thank you.

  Hello

  This article could make interesting reading.

  As suggested above by Paul, use a discrete videocard with HDMI.

• IDT High-Definition Audio Driver Update Failed

  PC HP Pavilion p6-2378 - Windows 8.1

  Updated recommended audio driver may 12, 2014, and he could not install.

  SoftPaq number: SP66216

  Version: 6.10.6491.0Dp1

  Tried again several times, has failed every time.  Restarted three times - nope.   Checked cables.

  At a loss.  Help, please.

  Hello

  What is the error message? On my machine:

  

  Kind regards

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!

• MBA does not play audio on JBL EXTREME

  Hello

  I tried to play music on my new JBL EXTREME of blue tooth speaker that proved no problem on my phone I have 6 s +.

  However, I can't be able to remove from my Mac Book Air!

  It's 'pairs' very well with the JBL speaker sound!

  He has played from the loudspeakers of the MBA.

  No music, no audio from Youtube on the JBL; nothing!

  I run the latest version of the software, and I restarted the MBA and the JBL repeatedly.

  My MBA plays very well with my Sennheiser Blue Tooth headset, so I think that my audio settings are OK. (?)

  Someone has an idea of what the question might be, please?

  Thank you!

  Rut

  Howdy MXP 150 Patriot,

  If you're able to pair your bluetooth with your Mac speaker, but your Mac continues to stream audio from its built-in speakers, you might check to see which device is selected in now Option while you click on the Volume control () in your menu bar. You can also check in system preferences > Sound > output.

  OS X El Capitan: adjust the audio output of your computer settings

  Note If you don't see the Volume control () in the menu bar, you can add it by checking the box "Show volume in menu bar" in system preferences > Sound.

  OS X El Capitan: increase the volume upwards or downwards

  All my best!

• removed the audio tracks in logic pro can be restored

  removed the audio tracks in logic pro can be restored, has been save logic & empty folders to the folder came, I deleted the originals by mistake...

  Not if you don't have the original audio files on your hard drive.  If you have deleted original, your only hope he then restore from a backup of your system, you have a.

• You can change the tempo without affecting/stretch automatically audio?

  My workflow...

  import an instrumental, then add a tempo meter to detect the tempo... can change the tempo of the project... but OOPS, that extends the audio file... How can I change the tempo without changing the audio file? Thank you!

  Region selected: in the region Inspector, uncheck 'follow Tempo and Pitch '.

  This will separate your audio region of tempo changes.

• Audio stuttering on MBPro Sierra

  I'm on a MacBook Pro installed macOS 10.12 retina end 2013 (Sierra).  For several years, I have used a bluetooth JBL of Charge 2 for this portable audio speaker (and sometimes my iPhone and other iPhones).  He has always worked flawlessly.

  Today when I hit play on the audio iTunes began badly stuttering.  After several searches, advice and read everything that I could find (especially regarding similar issues on other versions of the operating system as El Cap, Yosemite, etc.), I did the following, without result:

  • Not matched and repaired the speaker

  • Restarted/rebooted both the speaker and the MBP

  • Reset NVRAM and SMC

  • Redownloaded and reinstalled Sierra

  • Reset NVRAM memory new

  The problem persists.

  Note: I have also been hang this portable projectors in the classroom for several years via a port mini display to VGA and have never had a problem.  Since the upgrade to Sierra, can I talk to is no longer in the spotlight (my MBP always spoke to my external monitors (via the adapter, even) but not the spotlight.  I wonder if these issues are linked, at least to the extent where they came after the upgrade to Sierra.  Thanks in advance for any thoughts.

  Moments after the announcement of this question, I went into my list of connection and uninstalled Knock, an application that allows to unlock the lock screen by knocking on an iPhone.  And here, the sound works fine now.

  I guess I should have posted earlier, because I found the solution immediately after.  At least the bluetooth problem is now solved!

• iPhone 7 lightning to the questions of the audio input jack

  I often connect my phone to listen to music on stereo systems for listening to music out loud. When I used to do with my 6s, I had no problem with the sound output. Since switching to the iPhone 7 that I need to use the adapter to play music, but when I do this the sound is very distorted and sometimes if you put the volume a bit higher up the music stops. Even with a lower volume, it is still quite distorted. When I use a headset with the adapter and plug the phone into my car is fine no problem and sounds. It is only when I play music on the radio.

  I talked to Apple support and they were not really able to diagnose the problem or give me a solution.

  I was wondering if anyone else has problems with the lightning to the audio jack connector or something similar? and everyone is aware of any other superior quality adapters, you can buy or if there is a fix by apple to do deal with this?

  I don't have the problems you describe at all.

  To the extent where a 'solution' by Apple, not sure there is any 'broken' to fix.  Anyway, we are users here on this forum, we would have no idea what Apple would do.  Speculation is prohibited by the terms of use of this forum.

  Best,

  GDG

• DVD player freezes when audio editing

  My application DVD player recently started crashing every time that trying to change the volume of the silent era. The laptop is a MacBook 12 "retina 2015, using an external DVD drive that has worked very well for a year. Have tried on many different DVDs and they all load fine, DVD player auto-commence, but they all open with no sound. If I try to increase the volume of 0 on the slider, the player crashes. If I try to access audio via the menu 'Options' menu does load not for Audio and audio disk configuration is similarly frozen to corruption. Other audio works fine on the machine. Any idea on what could be the problem? Thank you.

  Greetings bhan001,

  Thank you for using communities of Apple Support. It seems you want to play a dvd on the MacBook connected via an external dvd drive. Given that the application crashes using each dvd that you tried it may be a problem with the application itself. There are a few things that we can try to isolate and solve the problem.  I would recommend you read these articles, starting in safe mode disables the 3rd party applications that may interfere with the DVD player application. If the problem persists, we can try a new user to test to see if it's a matter of profile or the scale of the system.
  

  Try safe mode if your Mac does not end commissioning

  How to test a question in another account on your Mac.

  Take care.

• New Audio USB Interface lose sound on El Capitan

  Hi all!

  A few weeks ago that I upgraded my MacBook Pro retina 15 "end 2013 to El Capitan, after that my USB Audio Interfaces (Focusrite Scarlett 2i4) and Safire 6 USB stopped working properly. Both work correctly when they are connected to an iMac 5K running the same operating system.

  I can listen to Audio for some time (about 10-2 Minutes, it is always different), when the Audio starts to crush und get outs, after a certain time there is only silence "click on" come out of the speakers.

  Heres an Audio file of the sound that results from: https://www.dropbox.com/s/5nb96bmdh47kmi2/20160923%20141619.m4a?dl=0

  I already tried to reinstall OS X (starting with CMD R and reinstall OS), reset PRAM and SMC. Nothing has changed the question. Any ideas where it comes from?

  Greetings

  Chris

  It is most likely a software conflict. Note the time at which audio is running out. Open the Console and look for accidents or mistakes at this time.

  The reason why it crashes on a mac, but not the others most likely is related to differences in software installed. Run Etrecheck on touch mac and post the report here.

• With the help of iTunes audio in Keynote

  I try to use music files, I regularly bought from the iTunes Store in my Keynote presentations. But many of them (not all, strangely) I get a message saying hat the media file "xxx" is protected against copying and I'm not allowed to use it.

  I used to import files from my iTunes library (including the files purchased from the iTunes Store) with previous versions of Keynote, without encountering any problems. Now, with 6.6.2, I have this problem, and in all my presentations created with previous versions of the audio files are not found.

  Please advise: I'm a musicologist and teacher, and it is frustrating to buy audio files specifically include them in my lectures and teachings and not to use them.

  Read this KB Apple: iTunes and digital rights management