Unable to connect to laptop after name change

Similar Questions

• Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Hello

  Try the methods below to solve the problem.

  Method 1:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 2:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  http://support.Microsoft.com/kb/811259

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• Unable to connect Adobe cloud after update the expiration date of credit card

  Unable to connect Adobe cloud after update the expiration date of credit card.

  The activation server show that CC has expired on 21 September, 2015. Please renew the subscription if possible or re-purchase.

  The best option will be to contact Adobe support for this.

  Concerning

  Stéphane

• Unable to connect to the MKS: (name of user and password) Login incorrect

  I am trying to use the VMware workstation 12, connect to the server feature but I get this error message.

  My desktop pc (host) is running windows 7 and running VMware workstation 12. I shared one of my virtual machines. I have activate port, 443, 902 and 903 on my router. I temporarily disabled my firewall.

  When I try to connect to my laptop running Kubuntu and Vmware workstation 12 host, I am able to connect to the host, I am able to see my shared VM and I am able to turn on and off but that's about all. I can not actually use the virtual machine, because I get the message in the title.

  Can someone help me? Thank you.

  Found a solution.

  In the host (windows)

  Open Notepad as administrator

  Edit the file in:

  C:\ProgramData\VMware\VMware Workstation\config.ini

  Change:

  Authd.client.port = "903".

  TO:

  Authd.client.port = '902 '.

  Save

  Unable to connect to the MKS: Login (user and password name) incorrect - Spiceworks

• OfficeJet Pro 8600: Unable to connect printer OfficeJet after update Win10

  I had my Officejet pro 8600 perfectly connected wireless to Win 7 for several years.

  After the update to Win10, I am unable to connect to the printer. The printer status shows that driver is not available.

  I checked Win10 and Adobe by other suggestions from the forum. both are up to date with the latest version.

  I uninstalled and reinstalled the printer Win10 driver and the download driver HP. None succeeded.

  Run the convenience store Win10 shows that the print spooler cannot be started. He is set to start automatically, but is currently stopped. I can not start it manually, and it does not start after a reboot.

  The fixed! I found the following information on a page of the Microsoft Help forum:

  Thanks to http://www.registryrecycler.com/blog/2013/12/how-to-fix-printing-error-in-windows-8-1/ for the fix.

  Apparently, the Windows 8.1 updates had the same problem.

  Editing the registry is necessary. Make sure that you have a backup of the registry before making changes.

  • Press the keys Windows + R on your keyboard to open the run box.
  • Type regedit in the box run and press Enter to open the registry editor.
  • Confirm the UAC message by clicking on the Yes button.
  • In the left pane of the registry editor, expand HKEY_LOCAL_MACHINE to find the key below.
  • SYSTEM\CurrentControlSet\Services\Spooler.
  • While the spooler key is highlighted, you can navigate the right pane to assign the value DependOnService.
  • Double-click the string value to change the data.
  • The data in the value field should contain the text saying RPCSS, followed by http in the next line.
  • Select and delete the letters http and click OK to save your changes.
  • Leave the part of RPCSS to the value data as it is written.
  • Close Registry of Windows and restart your computer.

• vFoglight unable to connect to vcenter after disabling sslv3 7.0

  Y at - it a patch for vfoglight 7 which allows for connectivity to vcenter TLS?

  After you disable SSLv3 in vcenter, foglight is unable to connect.

  [Quartz [0] - 90] ERROR com.quest.agent.esx.task.RelationsTask - error when running: ERROR: VI SDK invoke exception: javax .net .ssl .SSLHandshakeException: remote host closed connection during handshake

  java.rmi.RemoteException: VI SDK invoke exception: javax .net .ssl .SSLHandshakeException: remote host closed connection during handshake

  at com.vmware.vim25.ws.WSClient.invoke(WSClient.java:183)

  at com.vmware.vim25.ws.WSClient.invoke(WSClient.java:125)

  at com.vmware.vim25.ws.VimStub.retrieveServiceContent(VimStub.java:1409)

  to com.vmware.vim25.mo.ServiceInstance. (ServiceInstance.java:85)

  to com.vmware.vim25.mo.ServiceInstance. (ServiceInstance.java:69)

  at com.quest.vmware.api.connection.VIService.connect(VIService.java:60)

  at com.quest.vmware.api.connection.VIService.login(VIService.java:82)

  at com.quest.agent.esx.task.ESXAgentTask.connect(ESXAgentTask.java:178)

  at com.quest.agent.esx.task.ESXAgentTask.run(ESXAgentTask.java:116)

  at com.quest.agent.esx.ESXAgent.runTask(ESXAgent.java:407)

  at com.quest.agent.esx.ESXAgent.esxRelationsCollection(ESXAgent.java:469)

  at sun.reflect.GeneratedMethodAccessor42.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at com.quest.glue.core.services.EquivalenceInvocationHandler.invoke(EquivalenceInvocationHandler.java:70)

  at com.quest.glue.core.agent.AgentInteractionHandler.invoke(AgentInteractionHandler.java:186)

  to com.sun.proxy. $Proxy55.esxRelationsCollection (unknown Source)

  at sun.reflect.GeneratedMethodAccessor42.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at com.quest.glue.core.agent.scheduler.CollectorCallback.invokeCollector(CollectorCallback.java:162)

  at com.quest.glue.core.agent.scheduler.CollectorCallback.execute(CollectorCallback.java:130)

  to com.quest.glue.core.scheduler.quartz.QuartzScheduler$ ScheduledTaskSequentialJob.execute (QuartzScheduler.java:716)

  at org.quartz.core.JobRunShell.run(JobRunShell.java:202)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:895)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:918)

  at java.lang.Thread.run(Thread.java:662)

  2015-09-01 15:25:31.798 ECHO FATAL [Quartz [0] - 90] com.quest.agent.esx.task.RelationsTask - the agent could not establish an SSL secure connection to the VirtualCenter.  Please check your configuration of the agent in order to ensure a connection correct information has been entered.

  2015-09-01 15:25:31.798 ECHO

  Thank you

  Hi JLAPRADE,

  I read a similar case, it seems that the problem could be solved either:

  1) that allows SSLv2Hello to vCenter, or

  (2) upgrade to the latest Foglight/Agent managers to the latest version.

  Regarding the #1 option:

  Client configuration file updated the vpxd.cfg in vCenter. It's the line that needs to be changed:

  TLSv1

  To add the SSLv2Hello Protocol, the client he added after a comma:

  TLSv1, SSLv2Hello

  This solves the problem for this client, but you can check with VMware.

  If the problem persists after trying these solutions or if you have problems, their implementation, please open a request of Service (SR) with the support and mention this thread.

  This is where an SR can be created: support.software.dell.com/create-service-request

  Concerning

  Gaston.

• Unable to connect the laptop to the printer in a home network

  I just installed a HP Pavilion dv4 laptop, running windows 7 (64 k) and a router Linksys E-1000 of wireles in my home network, consisting of an HP pavilion a6150y desktop, running MS Vista Edition home premium (32 K), to which a HP Photosmart C4280 printer is connected via a USB port. All internet and e-mail functions work perfectly across the home network, except that I can't print from the laptop to the printer. I understand that the C4280 should function as a print server through the Desktop, but I can't print from the laptop. Heterogeneous operating systems cause inability to print from the laptop? Any suggestions?  The laptop has no problems printing to the C4280 when connected directly via a USB cable to the printer.
  Troubleshooting: I ran across the network installation procedure, but nothing helped. The printer has never worked since installation of network components House (e-100 of Linksys and the HP dv4 laptop) anyone can propose a solution?

  First of all, you need to set file/printer sharing and share the printer. If you have already done this and can successfully transfer a file both ways between the two systems, ignore the information of networking at the end of this post. Then you download from the site Web of HP for Windows 7 64-bit print drivers.

  http://welcome.HP.com/country/us/en/support_task.html

  Install the printer on Windows 7 computer and it should be considered during the installation procedure. If it isn't, then install the printer as a local printer instead. To do this:

  Go to the computer to which the printer is connected. Note the name of the computer that you will get to the control panel > system > computer name. Now in the Panel, go to the printers. Find the printer in question, right-click, and then click Properties. Note the name of the share. Of course you must have already set up file sharing / print on all computers involved and share the printer.

  Now, go to the remote computer to which you want to add the printer. Control Panel > printers > add printer

  Click Add a local printer. Click on create a new port. The default value in the drop-down list box is Local Port. Don't change that. Click Next. A dialog box appears for you request that you enter a port name. Type in the \\FullComputername\SharedPrintername

  ex: \\mycomputer\HPDJ (that's why you wrote the names of computer and printer in the first step)

  Click Next. In the manufacturers list, select the correct printer manufacturer and the correct printer model in the Printers list. Under "do you want to use this printer as default printer select"Yes"(if you do!). and click Next. When asked to print a test page, select 'Yes', then finish.

  If you have not already created your LAN file/printer sharing:

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  The Windows 7 network type must be on "Home" or "work". The type of Windows Vista network must be on "private". "Public" is for when you are connected to an Internet connection 'foreign' as an Internet café, at Starbucks or a hotel, etc. In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  In Vista, turn on password protected sharing.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. In XP, you can run the Network Setup Wizard or just enable file sharing / print in the Windows XP firewall exceptions. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  XP - set up Windows to automatically connect (MVP Ramesh) -http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  MS - MVP - Elephant Boy computers - don't panic!

• Unable to connect to laptop using the microsoft account

  Try to connect to computer laptop microsoft account and he said: I can not connect at this time. Change password etc. After several attempts can usually be connected but so annoying - try again now after 50 minutes. You have to go on another computer (apple!). What is going on. I want more convenience

  Hello

  I'm sorry to know that you can not connect to the computer. Let me try and help you with this problem.

  (1) you have an active network connected to the PC?

  (2) did you do with the last changes made to your computer before this problem started?

  (3) are you able to connect to Microsoft online account? https://account.live.com/

  (4) using an Internet connection wired or wireless?

  This happens usually if there is a network connection problem or it could be a temporary problem.
  
  First, if you are a using a wireless connection, please connect your PC to a wired connection and check if you are able to connect.
  If this does not help, you can reset the password and check that helps. You can connect to the Microsoft website https://login.live.com/ account and reset the password, and then check.

  Let us know the result. If you have any other questions, we will be happy to help you.

• Unable to connect my laptop XP Prof on printer Officejet J6450 AIO usb (in network)

  Due to some problems of scanning, I have reinstalled my AIO on my USB port of office instead of the old Dell (Windows 7-64) ethernet link. However, I'm unable to connect from my laptop with XP Pro. I downloaded and installed the latest version of the software of full J6450 and can do a test print, but cannot access the printer through the center of Solution, that's why the scanner and other features are not available from the laptop. Also, is anyone know hence the hp software file is extracted to so I can re - run the Setup file?

  The IOA has a w/l button, so I'll try an instalation w/l on the laptop.

  Hello Tracer_C

  Thanks for responding. The error was 'the scan cannot be performed because another program or computer uses... ". "The w/l installation was successful, after that several unsuccessful attempts. (I accept the blame for it). After 2 or 3 tries, I noticed the obligation to connect the printer to the USB port of the laptop to install the drivers. Apres_que the drivers have been installed the software it reset the network, and it does not connect until I plugged in the printer on the desktop).

  I thought I could do a no-w/l installation, but it is just as well, because I don't often print the laptop anyway, so I can keep the w/l off on the router function until I need to print from the laptop.

  I found the installation for Xp folder: C:\Documens and Settings\Temp\7Z***.tmp\Setup.exe Settings\nom of utilisateur\Local.

• Unable to connect IDE device after upgrade to 10.3.1

  Hi all

  I had updated the BlackBerry smartphone to 10.3.1, and after the upgrade, I am unable to connect my machine to Momentics IDE or deploy an application on the device of comand prompt.

  When I try to deploy from the command prompt, I get the following error.

  Error: Cannot connect: Connect to /169.254.0.1:443 timed out. Please check IP address settings for the target. You may have to reboot the target.
  

  Development on my device is set on IT.

  Concerning

  I had mode developer cross checked several times, but without success.

  Problem is solved.

  I deleted the data unit and then installed the upgrade pushed by Blackberry. Magic happened and it started working.

• Unable to connect to a network error - change wifi profile native default

  Unable to connect to my network. When I try to see my network it says wifi native default profile

  
  Original title: change the profile default native wifi

  Hello

  Thanks for posting your question on the Microsoft Community Forums!

  From the problem description, I understand that you can not connect to the wireless network.

  For a complete list of the steps to try, see the tutorial wired and wireless on this page.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/is-is/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  It will be useful.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Unable to connect to WIFI after upgrade windows 8.1

  Hello

  I fortunately was connection to my wifi at home last night before my HP Pavilion notebook updated to windows 8.1 g7. Now, I can only connect via ethernet cable.

  I called Microsoft Support and I was told that my wifi driver was outdated and must be reinstalled. I had a look at downloads available for the network drivers, but I'm not sure how to establish that that I need... There are 4 options.

  In the Device Manager > network adapters, it there was only one pilot who needed according to this update. The Realtek PCle FE Family controller. When I checked the updates here is said that it was updated successfully, but I am STILL unable to connect to the internet.

  Microsoft say it is a problem of HP, not them. Help, please.

  Thank you

  Hello

  My suggestion: using Device Manager to uninstall the Wireless driver and reboot the machine. Machine should say new hardware installed and find the good jerking for you OR you can download driver Realtek (wireless) from the above link and reinstall it.

  Kind regards.

• OfficeJet Pro 8610: Unable to connect 2 laptop HP Officejet Pro 8610

  I have 2 HP laptops each with Win7 (64 bit) SP1 and I'm trying to connect to the computer laptop 2nd in an OfficeJet Pro8610 to print wireless.  I tried using the CD rom and download the drivers online but I can connect this laptop to the printer.  I get to a point where the login process requires the printers claim id code but when I enter the code I got a message that this code is already in use (the other laptop is connected wireless) and in order to connect, I have to delete the other laptop.  I am at a loss here because I had both the same laptops connected to my old 6700 OfficeJet and could print without any problem installing wireless at all.

  What I'm missing here with the 8610?  Thank you

  Alkymst

  Alkymst

  The code you enter is likely to set up ePrint for the printer address.  Once this has been done it is not necessary to do it again.

  An alternative is that the laptop is connected directly to the printer with direct wireless wireless.  In this case, you will need to disconnect the laptop computer from the printer to use the other laptop.

  A better configuration would be to connect the printer to your router wither wireless or cable LAN cable.  It would give the IP address which you can find by pressing the front panel of the printer to the printer (if the printer is in mode "sleep"), then tap the wireless at the bottom of the screen.  This will bring up the LAN wireless status, where you can find the IP address of the printer.

  You should be able to set up the printer with the driver available at http://www.hp.com/go/toolsinstallation wizard.

• Unable to connect to LTE after firmware update

  My D5833 could connect to LTE after upgrade to Android 5.0.2. However, it can not longer after the new firmware updated to 23.1.A.1.28. I tried to turn off the phone, remove the SIM card and insert the return; tried flashing using flashtool, none makes it capable to connect to LTE.
  All the tips to solve the problem

  Try to manually add the APN settings and also get a new micro SIM card.

• Unable to connect my laptop to the new wireless printer - error "installation failed" after entering my password/security key (WPA)

  I just bought an Epson printer. I went through the installation process on my laptop but I get the "Failed to install" error message after entering my password/security key (WPA). I am with BT and my home hub I have "Wireless Key", "PIN WPS wireless" and "Admin password" - which is it? I tried all three and not joy. Help!

  It is almost certainly looking for your "wireless key".

  The WPS Pin is only used if the printer supports "Wi - Fi Protected Setup" - which it probably isn't, and the "Admin" password is used to access your BT home hub to make configuration changes.

  In addition to identifying what wireless Epson printer you have, you can either

  • b changes to the configuration of the printer from a screen on the front or
  • (b) to connect to the printer by an Ethernet cable or
  • (c) to connect to the printer with a USB cable?