PAGE_FAULT_IN_NONPAGED_AREA
Hello
When I went to put my PC Windows XP standby last night, I saw a message to shut down my PC in order to install a Microsoft Update, so I stop the PC. This morning, when I tried to start my PC, I get a blue screen with white letters indicating:
"A problem has been detected and windows has shut down to prevent damage to your computer.
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is installed correctly. If this is a new installation, as the manufacturer of your hardware or software for the windows updates you might need.
If problems continue, disable or remove any newly installed hardware or software. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart computer hyour, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical information:
STOP: 0 X 00000050 (0 X 80098004, 0 X 00000000, 0X00000001, 0 X 80515103)
I tried to make it start in safe mode and other modes, but I always find myself with the same blue screen saying the same thing as above. Any ideas?
Thank you
Hi bahvol,
I suggest you follow the steps mentioned by 'LThibx' in the thread http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1.
-------------------------------------------------------------------
Naveen
Microsoft Answers Support Engineer
Visit our
Tags: Windows
Similar Questions
-
"iastor.sys page_fault_in_nonpaged_area" even in recovery image
On my brand-new U840, after installing all the thing I need, I thought it will be nice to use the SSD for Windows SWAP file. SYS (4 GB on a 8 GB partition)... and everything went well. Then I thought will be nice to use to use the rest of 24 (unpartitioned) Go for something else. In Ubunt (was unavaible in Windows!) I have formatted these 24 GB in ntfs and after startup I got a nice blue with screen
.....
iaStor.sys
PAGE_FAULT_IN_NONPAGED_AREA
....
I tried everything (delete the new partition... all partitions on ssd... by default in the BIOS... Turning off some Intel setting in BIOS)... * Windows does not start... even drive HARD recovery... even the recovery of USB *...I'M STUCK! ... Any ideas?
Kind regards
StefanStand by.
Did you install the recovery image using created recovery key USB and set the mobile o factory settings? -
Satellite L350-171 - PAGE_FAULT_IN_NONPAGED_AREA message
My laptop has developed what seems to be a hardware problem.
Whenever I turn it on it displays a blue screen of death.PAGE_FAULT_IN_NONPAGED_AREA
Tecnical Info * STOP: 0 x 00000050 (0x89b00000, 0 x 00000000, 0 x 00000000, 0x8dc8ed23)I think it's the hard drive, as I deleted it from the laptop, put it in an external hard drive enclosure and I connect each pc to the almost immediately blocked.
Y at - it any sort of way, the hard drive. And if I replace it how can I get the OS on it since I have no recovery disks.
> Is there any sort of way the hard drive. And if I replace it how can I get the OS on it since I have no recovery disks.
You can use a common HARD SATA 2.5 disk. This type of HARD drive should work in L350.
It seems that you didn't create a disc of recovery in the past. Right?Well, in this case, you will need to order a recovery disc reinstall system which has been pre-installed by Toshiba.
This disc can be ordered here:
http://backupmedia.Toshiba.EU/landing.aspx -
HP Mini 210-4000 blue screen of death PAGE_FAULT_IN_NONPAGED_AREA Error
I've been up and down the Forums here with no specific luck, unfortunately, so I'll ask even if this has been asked and solved in another part of the site that I may have missed.
I'm trying to untangle HP Mini Notebook a friend, model HP Mini 210-4125sa. The machine starts well enough until last week, when it was suddenly decided to blue screen.
The text of the error message displayed in the BSOD reads as follows:
PAGE_FAULT_IN_NONPAGED_AREA
TECHNICAL INFORMATION:
STOP: 0 X 00000050 (0X87E40000, 0X00000000, 0X00000000, 0X92442B13)
I can't start after loading Windows 7 - the load bar screen makes two fifths upwards and that's all.
I had thought to try to recover the operating system, if possible, of what is apparently a recovery partition that is created on the hard drive (I have not worked with these machines before, unfortunately), but I can't figure out how to get to that partition before the typing error.
In addition, after trying to download a piece of software of HP USB recovery Flash Disk Utility, I realize it seems necessary to use it in fact of the computer laptop itself, that is not possible.
Having begun to run various tests on board in the menu of the BIOS, the hard drive Test failed just apparently (more specifically the hard drive part optimized DST test), with ID GGBXXV-66A75U-MFPX0J-61VV03 failure (I don't know if this information is useful but am nevertheless understood). HP unfortunately were not a lot of help as they wil only offers unique support technician call for forty pounds, or to take the laptop away for repair, which cost almost as much as the original of the material costs. Of course, I prefer to try and resolve this issue myself but have hit a bit of a wall at the present time. Any suggestion would be great at this point.This test equipment for the hard drive is a gift died of a faulty element. A failed hard drive is a show-stopper.
Hard drive optimized DST part of the test), with ID GGBXXV-66A75U-MFPX0J-61VV03 failure (I don't know if this information is useful but am nevertheless understood) This is important information.
A corrupted NTFS (hard drive) volume can also generate the "error PAGE_FAULT_IN_NONPAGED_AREA" stop message.
-
BSOD once a week PAGE_FAULT_IN_NONPAGED_AREA Server 2008
Can someone help me with this? I have an Acer EEE PC running Windows Server 2008 R2 and around once a week, I get something like this (see below).
PC made that act as an FTP server and a Remote Desktop server to which I log on remotely. I ran the update of windows a few weeks ago, but no change. Please it makes me crazy that the machine is in a remote and difficult to access.
Thanks much for any help!
A problem has been detected and Windows has been shut down to avoid damage
on your computer.The problem seems to be caused by the following file: hal.dll
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you've seen this stop error screen,
Restart your computer. If this screen appears again, follow
the following steps:Check to make sure any new hardware or software is installed correctly.
If this is a new installation, ask your hardware manufacturer or software
the Windows updates, you might need.If problems continue, disable or remove any newly installed hardware
or software. Disable the BIOS memory options such as implementing caching or shading.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options and then
select Safe Mode.Technical information:
STOP: 0 X 00000050 (0XBBEC0000, 0X00000000, 0X00000001, 0X8186BCF3)
HAL.dll - address 0x81bd950c base at 0x81bd2000 0x47918a38
We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.If you are overclocking stop. (chances are if you are unsure if you are, you are not) aTo allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump". We need at least 2 FILES DMP to diagnose and confirmThe procedure:* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.* Zip up the copy.* Join ZIP archive to your message by using the button (attachments) "trombone". (if available on your site, MS has this)* Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.Link to find out how to download below.To ensure the minidumps are enabled:* Click Start, in the search box, type: sysdm.cpl, press ENTER.* On the Advanced tab, click Startup and recovery... Settings button.* Make sure that automatically restart is unchecked.* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.* OK your way out.* Reboot if changes have been made.Please also run MSinfo32 and download the output as well.To run MSinfo32 please go to start > run > MSinfo32Go to 'file', 'save' and download the PDF is saved with the DMPSystem specs are extremely useful then please include everything you know.
Blue screen view and that crashed are often wrong and should only be used in case of emergencyTeam Zigzag3143.com -
PAGE_FAULT_IN_NONPAGED_AREA (50) - Windows Server 2008
Hi Microsoft supports the team.
We have Windows server 2008 sp2 enterprise edition-32 bit, once a week, we started receive "PAGE_FAULT_IN_NONPAGED_AREA" error message on this subject. What error come server stops responding and blue screen came up with the error message above, after that, you need to restart the server to begin to work in!
Please find below the log from the dump file:
--------------------------------------------------------------------------------------------------------------------------------------------------Loading dump file [C:\Windows\Minidump\Mini080312-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are availableSymbol search path is: D:\241 RND\Symbols\Extracted
Executable search path is:
Could not load the ntoskrnl.exe, 0n2 error Win32 image
WARNING: Unable to verify timestamp for ntoskrnl.exe
ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (8 procs) free x 86 compatible
Product: LanManNt, suite: TerminalServer company
Computer name:
Kernel base = 0x82a18000 PsLoadedModuleList = 0x82b2fc70
The debugging session: 23:11:57.714 on Thursday, August 2, 2012 (UTC + 01:00)
System Uptime: 9 days 15:17:21.963
Could not load the ntoskrnl.exe, 0n2 error Win32 image
WARNING: Unable to verify timestamp for ntoskrnl.exe
ERROR: Module load completed but symbols can be loaded for ntoskrnl.exe
Loading the kernel symbols
...............................................................
................................................................
............
Loading user symbols
Loading unloaded module list
..........
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************Use! analyze - v to obtain detailed debugging information.
Bugcheck 10000050, {f2a45048, 0, b 82, 94299, 0}
The kernel symbols are FALSE. Correct symbols to do the analysis.
*************************************************************************
*************************************************************************
*** ***
*** ***
Either you have specified an absolute symbol, or your debugger *.
has no information complete symbol. Absolute symbol *.
resolution is disabled by default. Please specify a *.
complete symbol module! NomSymbole, or activate the resolution *.
symbols unskilled by typing '.symopt 100 '. Note that *.
allowing unqualified symbol with the network symbol resolution *.
shares of server in the symbol path can cause the debugger to *.
appear to hang for long periods of time when an incorrect *.
symbol name is typed or the symbol of the network server is down. ***
*** ***
For some commands work properly, your symbol path *.
should point to .pdb files have the type information complete. ***
*** ***
Some (such as the public OS symbols) .pdb files are not *.
contain the required information. The contact group that *.
you provided with these symbols, if you need this command for *.
work. ***
*** ***
Type referenced: nt! _KPRCB *.
*** ***
*************************************************************************
*************************************************************************ADDITIONAL_DEBUG_TEXT:
You can run '.symfix; .reload' to try to fix the symbols path and of loading symbol.MODULE_NAME: nt
FAULTING_MODULE: 82a 18000 nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4f79a9be
READ_ADDRESS: could not get nt! MmSpecialPoolStart
Unable to get nt! MmSpecialPoolEnd
Unable to get nt! MmPagedPoolEnd
Unable to get nt! MmNonPagedPoolStart
Unable to get nt! MmSizeOfNonPagedPoolInBytes
f2a45048FAULTING_IP:
NT + c 17 299
82b 94299 394724 cmp dword ptr [edi + 24 h], eaxMM_INTERNAL_CODE: 0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT_SERVER
BUGCHECK_STR: 0 X 50
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from 82b9a7f4 to b 82, 94299
STACK_TEXT:
WARNING: Information not available stack unwind. Sequence of images may be wrong.
90e72a8c 82b9a7f4 01000001 4020 009c3f70 nt 009c + 0x17c299
90e72abc 82b9ae22 c422da20 00000006 01000001 nt + 0x1827f4
82b 95848 01000001 90e72c60 8000e8d0 nt 90e72b04 + 0x182e22
90e72b60 82b97fb7 90e72bb4 00000000 00000005 nt + 0x17d848
90e72bd8 82b9a257 90e72c60 90e72c4c 00000000 nt + 0x17ffb7
90e72c18 82b9049f 90e72c60 90e72c7b 00000000 nt + 0 x 182257
90e72d14 82b906d4 82b105a0 00000002 00000002 nt + 0x17849f
90e72d38 82c6fb01 82b1a13c 8784e020 82abdda2 nt + 0x1786d4
90e72d7c 82bedfe2 9b1e85b2 00000000 00000000 nt + 0x257b01
90e72dc0 82a56f0e 82abdca5 00000000 00000001 nt + 0x1d5fe2
00000000 00000000 00000000 00000000 00000000 nt + 0x3ef0eSTACK_COMMAND: kb
FOLLOWUP_IP:
NT + c 17 299
82b 94299 394724 cmp dword ptr [edi + 24 h], eaxSYMBOL_STACK_INDEX: 0
SYMBOL_NAME: nt + 17 c 299
FOLLOWUP_NAME: MachineOwner
Nom_image: ntoskrnl.exe
BUCKET_ID: WRONG_SYMBOLS
Follow-up: MachineOwner
-----------------------------------------------------------------------------------------------------------------------------
Can you please review and guide us more as soon as POSSIBLE.
Let me know if any other information required for the same thing.
Kind regards
Helen Shah
Hello
The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
http://TechNet.Microsoft.com/en-us/WindowsServer/bb310558.aspx
Hope this information is useful.
-
Blue Screen of Death "PAGE_FAULT_IN_NONPAGED_AREA".
Blue Screen of Death
I recently started having the blue screen of death, and this is the error message I get. PAGE_FAULT_IN_NONPAGED_AREA the problem seems to be caused later file rt73.sys
What this has to do with my wireless network card? I have a Netopia Wireless usb adapter. I unplugged it and my computer started fine but the minute I plugged it I got the screen again. not sure if this is whats causing the blue screen.
Please notify.
Thanks in advance
God bless youHello
· You did it all changes before the show?
· You have the latest drivers installed?
Check to see if the following is useful.
Method 1: You can check if this article helps.
Method 2: Download and install updates for your computer from Windows Update device drivers.
Method 3: Check your hard drive for errors.
-
PAGE_FAULT_IN_NONPAGED_AREA (nvlddmkm.sys)
Hello
I used to have a BSOD, DRIVER_POWER_STATE_FAILURE, which fixed by updating my Nvidia driver. Now I keep having PAGE_FAULT_IN_NONPAGED_AREA (nvlddmkm.sys). I don't know if it's the problem of the driver, but it's really annoying. My computer freezes at random about 2 - 5 times a day. While watching videos, playing games, surfing on the web and just being AFK. I studied the problem a lot and I have not found a solution for it.
NVIDIA GeForce GT 640M 2 GB of VRAM
64-bit Windows 8
Acer Aspire V3 - 571 G
If the problem is not resolved, I'm going to get it fixed, it is still under warranty. Although it is like 100 km by bus... :/
Hi LG33,
I do not think that you have owned this camera very long, so I'll assume that the graphics card is not defective. This is usually caused by a driver problem. I would say do a refresh on your system (no data loss) by following the steps listed here: http://windows.microsoft.com/en-CA/windows-8/restore-refresh-reset-pc
Try it, if you still have questions after probably have a hardware problem.
-
G ' Day,.
I have the following problem with windows XP Professional.It does not boot the operating system window, it sends the message, "WINDOWS/SYSTEM32/CONFIG/SYSTEM FILE CORRUPT" AND THEN IT RESTART itself AGAIN, APART FORM THE PAGE_FAULT_IN_NONPAGE_AREA MESSAGE SHOWN below, WHO COMES up like a BLUE SCREEN OF DEATH MESSAGE of ERROR:.THE SCREEN OF DEATH ERROR MESSAGE BLUE SAYS:Page_Fault_IN_NonPAGED_AREASTOP: 0 X 00000050 (0XEE91DDB8, 0 X 0000001, 0000002 0 X, 0X80891D7E)HOWEVER, when I swap the two different slots memory sticks, I received the following error message:STOP: 0X0000007E (0 X 0000000, 0XC000005, 0XF78D6198, 0XF78D6498)I WOULD BE CORRECT IN SAYING THIS, THIS SEEMS TO SUGGEST A FAULT OF SEMICONDUCTOR MEMORY IN ONE OF MY STICKS OF MEMORY 1024MBYTE.If YOU can help, please advice on probable cause or problem.FredNo chance is this is a driver.
We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
If you are overclocking STOP
You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
Please follow the instructions for posting at this link
To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".
The procedure:
* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
* Zip up the contents of this folder
Please, upload to skydrive or a file sharing service and put a link to them in your next post.To ensure the minidumps are enabled:
* Click Start, in the search box, type: sysdm.cpl, press ENTER.
* On the Advanced tab, click Startup and recovery... Settings button.
* Make sure that automatically restart is unchecked.
* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files
http://www.osronline.com/article.cfm?article=545
-
Hello
I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday. To do this, that every time I try to start the system.Whenever I try to start it gives options to start in safe mode, safe mode with network, safe mode with prompt etc., but all these options find you on the same blue screen with the error mentioned above, then it tries to restart with the same behavior over and over again.
Any guidance will be appreciated. Thnx Nick
Hello
If you meet this new,
http://mikemstech.blogspot.com/2011/12/troubleshooting-0x50.html -
It is so what happened, I was playing my video game, then my computer went this blue screen and froze, so I unplugged the computer and restart, but after he showed the microsoft logo, he went into this blue screen during the second half and restarted, so I tried safe mode, but it didn't start either , so I tried to not turn off when the error occurred, or something like that, then I got the code PAGE_FAULT_IN_NONPAGED_AREA, STOP: 0 x 00000050.
can anyone help, pls?Hello
If you encounter this again, here is a starting point for troubleshooting,
http://mikemstech.blogspot.com/2011/12/troubleshooting-0x50.html
-
Original title: need help with the blue screen issue
My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.Hello
1. Since when are you facing this problem?
2. you remember to make changes to the system?
3. do you get an error with this error code?I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.
Method 1.
I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
Description of the Windows XP Recovery Console for advanced users
http://support.Microsoft.com/kb/314058
b. perform a disk check.
How to perform disk error checking in Windows XP
http://support.Microsoft.com/kb/315265Method 2.
I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
How do I recover from a corrupted registry that prevents Windows XP startup
http://support.Microsoft.com/kb/307545I hope this helps.
-
I get error page_fault_in_nonpaged_area, I can not even to start windows in safe mode, I can't really afford to lose everthing on my laptop, it did not come with any disk, I have not installed new hardware, only the new software is Google Chrome with a few Add-ons for it, laptop Dell with Windows XP Please help
I don't really know what to do, I can't access the windows at all, please help
Hello
To retrieve your documents, you can download a program called knoppix that you can put on a cd. Then boot on this cd. They copy the documents on another device. Here's a link for you help do - option 3
MyPcHealth - free tools
-
Please help send the laptop to repair costs more than the laptop... can I now an expensive paperweight? I remember well, here are the details:
-bsod STOP: 0 x 00000050 (0xE967206E, 0 x 0, 00000002 00000000, 0X836A8510)
-tried to restart, all options on F8 does not.
-No installation disc available as it was only an upgrade to vista (tried the upgrade disc, didn't work)
-recovery disk proven system of point of sale without success.
-every time we it reboot go to the black screen with the bar where the green bars run on the side but always goes back to bsod.
-System is an ACER EX4630-4126
-BSOD popped up all while surfing internet
-is the new software installed spybot s & d
-can not run memtest because it does not start up vista
-tried running the memory diagnostic tool but it shut down on me before completing the diagnosis
Any help would be greatly appreciated. I'm not much of a person of the laymens terms computer wouldn't greatly appreciated. Thank you.
Ainjel Hello,
This occurs generally early in the boot process. For example, the problem may occur shortly after the splash screen appears, and you will see a black screen with a moving progress bar. Specifically, this problem occurs generally when the system tries to load the i8042prt.sys driver. The problem only occurs in certain hardware configurations.
You need the installation disk so that you can try to perform a system restore which is the WinRE recovery environment and then once you are able to start, you can try to install the fix below:
Error message when you start a Windows Vista-based computer: "STOP: 0 x 00000050 PAGE_FAULT_IN_NONPAGED_AREA".
http://support.Microsoft.com/kb/939720
Do a restore from WinRE system:
Kind regards
Savan Microsoft technical support.
-
Blue screen 0 x 00000050: "PAGE_FAULT_IN_NONPAGED_AREA".
original title: blue screen: "PAGE_FAULT_IN_NONPAGED_AREA" on Vista
Hello Microsoft answers site,
I recently acquired a blue screen message "STOP: 0 x 00000050 PAGE_FAULT_IN_NONPAGED_AREA" on my Windows Vista home premium SP2.
I have all ready a startup repair and haven't had no effect.
There is a fix for this KB Article (s): 939720, seems that there is a great risk if something is wrong.
I was wondering, if I had to re - install SP2 and have a chance to solve this error. It would be worthwhile to re - install SP2 or it won't do a thing, and I should just go ahead and do the fix?
Any help would be fantastic! =]
-eplalo
In the control panel select Problem Reports and Solutions (problem of type in)The START searchbox), go to the history of the problem, your mistake right click and chooseCheck the Solution. You can also examine the details and see the exact textthe error here.In administrative tools, choose the reliability and performance monitor andClick on MonitoringTools then the reliability monitor (type of reliability in researchat startup). This list is a chart of the software installs, uninstalls, Windowsupdates and crashes by date. See if your plant started to occur afteryou installed or uninstalled something.You can clean bootTroubleshooting http://support.microsoft.com/kb/331796Also check what happens if you log on under a different name?Follow these steps to exclude material failures.Type of memory in the start search box, and choose Diagnostic memory. This willtake a few minutes.In computer discs right click and choose Properties, then the Tools tab.then click on check now. Check the TWO boxes and then click Ok. Reset. This will takefrom one day to the next.After running chkdsk (which did above) click on start - all thePrograms - Accessories - right on command prompt and choose Run asAdministrator. Typesfc/scannow--..--"Terisa_86" wrote in message news: d010380e-92e8-4bca-973f-d4a9fcbb9dcd...> My screen blue has a series of numbers, is the only one I can catch> 0x0000009F because of the short time that it is on the screen. It has happened> for some time, "dump" messages just at random on a blue screen. I had> my computer has worked to try to resolve the problem by professionals, but it> doesn't seem to have done any good. Please notify.>>>> Thank you>
Maybe you are looking for
-
Where is the technical help?
where is the help of technology? do not understand when we phone
-
Need Windows7 32 bit drivers for my Satellite U300 - 10 M
I want to download drivers for my Toshiba Satellite U300 - 10 M for Windows7 32 bit operating system.
-
Date and time of change in Windows XP?
So I have a Windows XP desktop computer. I shut down my computer, unplug it, put on an hour later, nothing happens. But sometimes if I let him stop for too long, as day 4 or more, it will be displayed this error message on the image below: http://img
-
How to detect a firewall?
I uninstalled Norton 360 and my system runs faster. However, I'm alert center of Windows security that no firewall is"currently in place" but that "Windows doesn't detect all firewalls. How do you know if there is an active firewall on my system?
-
CD and DVD cannot format or save
0 Connect you vote Windows XP - sp3 teacher with NEC DVD +-RW and CD-R/RW Samsung. After update 09/06/10, lost all data interfaces account limted to restore them, were still available. But... I can read CD and DVD discs, but cannot 'format', it is no