page of the partition, and then move to exel

Similar Questions

• stop the machine, and then move?

  Is it possible to pause a virtual machine, and then remove the vcenter inventory, then add it to the inventory from another host?  Can reactivate the machine?

  As far as I know to remove the inventory virtual computer, it must be turned off

• Size of the partition and Index Local

  Hi all

  Database information: 11.2.0.3 64-bit Linux. It is a 3 RAC Cluster node.

  I recently partitioned a Parent and child tables as PARTITION of REFERENCE set. The parent table has been RANGE - partitioned. The first partition is on an integer column and the beaches are 0-1000, 10001-2000, 20001-30000 and so on. The secondary partition is on a date and it is partitioned for each quarter.

  I created a local index as follows (faullt2vehicle, offboard_load_date, record_type, Column_Y).

  Here's an example query I will carry out, where the date is covering 2 secondary partitions

  select  * from gets_tool_Fault t where fault2vehicle                                      = 12195
  and offboard_load_date                                 BETWEEN TO_DATE('2015-04-01 00:00:00', 'yyyy-mm-dd hh24:mi:ss')
  AND TO_DATE('2015-07-01 00:00:00', 'yyyy-mm-dd hh24:mi:ss')
  AND record_type                                        IN('FLT','STP','HC','EGU','EOAEQP','CEL')
  

  When I generate the plan explain below is the output

  Plan hash value: 2702285198
  
  --------------------------------------------------------------------------------------------------------------------------
  | Id  | Operation                           | Name               | Rows  | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
  --------------------------------------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT                    |                    |   386 | 76428 |   244   (0)| 00:00:03 |       |       |
  |   1 |  PARTITION RANGE SINGLE             |                    |   386 | 76428 |   244   (0)| 00:00:03 |     2 |     2 |
  |   2 |   PARTITION RANGE ITERATOR          |                    |   386 | 76428 |   244   (0)| 00:00:03 |     7 |     8 |
  |   3 |    TABLE ACCESS BY LOCAL INDEX ROWID| GETS_TOOL_FAULT    |   386 | 76428 |   244   (0)| 00:00:03 |    10 |    18 |
  |*  4 |     INDEX RANGE SCAN                | GETS_TOOL_FAULT_C7 |   386 |       |     7   (0)| 00:00:01 |    10 |    18 |
  --------------------------------------------------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     4 - access("FAULT2VEHICLE"=12195 AND "OFFBOARD_LOAD_DATE">=TO_DATE(' 2015-04-01 00:00:00', 'syyyy-mm-dd 
                hh24:mi:ss') AND "OFFBOARD_LOAD_DATE"<=TO_DATE(' 2015-07-01 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))
         filter("RECORD_TYPE"='CEL' OR "RECORD_TYPE"='EGU' OR "RECORD_TYPE"='EOAEQP' OR "RECORD_TYPE"='FLT' OR 
                "RECORD_TYPE"='HC' OR "RECORD_TYPE"='STP')
  
  

  If you observe the optimizer is currently to identify the partition, and then the secondary partition, but what is confusing to me, this is why the restricted PREMISES index scan scans all secondary partitions for a given partition. The partition should be not even as a value from PARTITION RANGE ITERATOR of 7 and 8.

  Interestingly, when I provide a date range which is in single partition the pruning is happening correctly
  
  Plan hash value: 3457799067
  
  --------------------------------------------------------------------------------------------------------------------------
  | Id  | Operation                           | Name               | Rows  | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
  --------------------------------------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT                    |                    |     1 |   197 |     4   (0)| 00:00:01 |       |       |
  |   1 |  PARTITION RANGE SINGLE             |                    |     1 |   197 |     4   (0)| 00:00:01 |     2 |     2 |
  |   2 |   PARTITION RANGE SINGLE            |                    |     1 |   197 |     4   (0)| 00:00:01 |     7 |     7 |
  |*  3 |    TABLE ACCESS BY LOCAL INDEX ROWID| GETS_TOOL_FAULT    |     1 |   197 |     4   (0)| 00:00:01 |    16 |    16 |
  |*  4 |     INDEX RANGE SCAN                | GETS_TOOL_FAULT_N1 |     1 |       |     3   (0)| 00:00:01 |    16 |    16 |
  --------------------------------------------------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     3 - filter("RECORD_TYPE"='CEL' OR "RECORD_TYPE"='EGU' OR "RECORD_TYPE"='EOAEQP' OR "RECORD_TYPE"='FLT' OR 
                "RECORD_TYPE"='HC' OR "RECORD_TYPE"='STP')
     4 - access("FAULT2VEHICLE"=12195 AND "OFFBOARD_LOAD_DATE">=TO_DATE(' 2015-04-01 00:00:00', 'syyyy-mm-dd 
                hh24:mi:ss') AND "OFFBOARD_LOAD_DATE"<=TO_DATE(' 2015-06-01 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))
  

  Thank you

  Jayadeep

  1. your index (faullt2vehicle, offboard_load_date, record_type, Column_Y), your query has a predicate based on a beach on the second column in this index, which means that the order of the index that must be examined is dictated by this predicate and each row in the range must be considered (filtered) to check the third predicate.  Basic guideline on the column in the index you are ordering for more effective use: If you have columns where predicates are always equal put these columns at the beginning of the index, the columns where predicates are usually based on a beach go towards the end. You seem to have been misled by reviews 'the prefix local index' stick to your two columns of partitioning at the front of your index - which should NOT be an automatic choice for the local index: see this note ( https://jonathanlewis.wordpress.com/2011/02/28/prefixed/ ) comments that follow and OTN article it is linked to.

  2 since you have two indexes that start the same way (this goes with the local prefix again) you made easy for the optimizer to choose the index (for you) is clearly evil. That's why behind the choice of the optimizer is probably another example of an issue that I spoke a few days ago: Re: Composite index + map selection N1 your index is probably greater than the index of C7, and the order of the entries in the C7 index probably makes the data much more dispersed that it really is (i.e. high clustering_factor).

  Concerning

  Jonathan Lewis

  PS (update):

  If there are many rows for each fault_id, then you must create an index from fault_id with 'compress 1' (or compress N if the first columns of the index N are repetitive).

  When dealing with range partitions do not forget that the high value partition is never reached in the document, do so based in the form "date_col BETWEEN date1 and date2", use the form "date_col > = dateX and date_col»< datey"="" or="" you="" may="" find="" that="" you="" are="" accessing="" one="" more="" partition="" than="" you="" hope="" to,="" and="" in="" some="" cases="" that="" may="" mean="" "multiple"="" (i.e.="" 2)="" when="" you="" were="" expecting="" 1="" (and="" the="" optimizer="" is="" much="" better="" at="" estimating="" costs="" for="" a="" single="">

• Open a local copy or move on the server, and then disconnect while the task is running until the end

  RNOS6 running on RNDU600 +.

  Looking to start a local copy or move of the large collection of files on the server, and then disconnect the PC while the task is running until the end. For example, to move a branch of several hundreds of GB of small files from one share to another, or copy them to a share.

  Seems to make my PC (in wireless) is inefficient as each file seems to have sent to the PC first, then return to the NAS.

  Is there a way of ordering on the NAS, so that it can continue the operation even if the PC is disconnected?

  Have you tried to make using the web administration page?

• When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

  When we turn on my wife's ipad, a box of red line begins to jump around the screen, and then a pale red stripe moves back on the screen. Any ideas on how to stop it? Thank you

  The standard specifies:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• The video file can be published to the specified location. Check that the publishing location is still available, that there is enough free space on the disk, and then republish the movie again.

  It happened once before, but it somehow went away after I restarted my laptop. I restarted my laptop, this time, but it has not worked.

  ~*~

  OK, so I just finished put a video together. It consists of a Hypercam 2 record (which means it's a .avi file), a PNG image, text and a song (which is a WMA file).

  ~*~

  I save the file, and then click Publish Movie. Everything goes well until the last step where the video is actually published. The window made a break for a while before you receive the following message;

  ~*~

  "Cannot complete the movie publish .

  The video file cannot be published to the specified location. "Check that the publishing location is still available, that there is enough free space on the disk and then republish the movie again."

  ~*~

  I know there are a lot of free space on the drive on my laptop (it's an Inspiron 1520), and that there is nothing wrong with any of my files. I tried to change places without result. It simply doesn't get it. It would be a great help to me if someone could tell me what is the problem :)

  ~*~

  Thank you very much

  Len

  Microsoft Windows Movie Maker is not to let me publish my movies

  Hello

  I suggest you try the steps mentioned in the link given below.

  Error message when you try to publish a movie using Windows Movie Maker in Windows Vista: "cannot complete publish movie.

  http://support.Microsoft.com/kb/930435

  Additional information:

  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

• When installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system?

  Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.

  Original title: used to install Windows 7

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also check Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  J W Stuart: http://www.pagestart.com

• Illustrator art Council moves to the right of the app and disappears. I'd appreciate the help. I rebooted the software and then my macbook pro, nothing helps.

  Illustrator art Council moves to the right of the app and disappears. I'd appreciate the help. I rebooted the software and then my macbook pro, nothing works

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  MacBook is the material.

  Is what system this?

  Any improvements installed in the system? Well is the material?

• Hi, well, I want to get the creative cloud cuz I need for my career as urgent, but I will change my phone soon, so my question is... can I install in my pc, and then move them to another without paying again or something?

  Hi, well, I want to get the creative cloud cuz I need for my career as urgent, but I will change my phone soon, so my question is... can I install in my pc, and then move them to another without paying again or something?

  Yes.

  You can install an unlimited number of computers.  You can connect to up to two computers at any time (and you must be connected to use your cc programs).

  It's quick and easy to sign in and out, so there is no downside on the use of the cc on different computers.  legally, only the licensee is authorized to use the subscription of the cc if you can't share your programs with another person, but this is the only restriction.

  you have just installed you are the application of cc desktop on any computer you use, Download Adobe Creative Cloud apps | CC free trial Adobe

  Connect, connect and disconnect activate Cloud Creative applications

  Use the desktop application to install your programs of cc.

• "The drive where windows is installed is locked. Unlock the drive, and then try again. »

  Have a laptop Envy M6-K010DX. Due to a problem of the internet while improving to win 8 to 8.1, the PC does not start correctly, and Windows Explorer will not load. Has decided to "Refresh" of the operating system and is gone to F11 restore utilities. When I go to the utility of refreshment and follow the prompts that I reach a message that says, 'the drive where windows is installed is locked. Unlock the drive, and then try again. "I was looking for support for the unlocking instructions and apart from some commands bootrec (which did not work - probably because I don't have a Win 8 disc) not much is available.

  The only access I have for execution of orders made by the tasks Manager command-line and F11. What is this 'locked' drive, anyway? Someone at - it any information on that?

  Hello Lara.

  IF you have updated from 8 to 8.1 and the process was interrupted during installation, this may damage the disc and therefore locked error. "Refreshing" the system would not be the answer that you need to clean install Windows 8 again. 8.1 update can break the bond of the recovery partition, especially if it has become corrupted as indicated.

  You must clean up the installation with the recovery discs, you must have created before you updated to 8.1.

  In addition, if you do not have the recovery disks, you can buy a set of HP or install a regular copy of Windows 8 and then update the drivers manually. HP has the Windows key now integrated into the bios.

  This forum is used on a voluntary basis and is not maintained by the HP Support for substitution of contact.

  Your message looks like not it was even 24 hours old before you decided to delete it from the original computer?

  I'm sorry to hear you had to do this.

  If you need to HP support, you must contact them directly to your country or region.

  Contact HP-Assist phone USA | HP® official site

  Contact HP worldwide | HP® official site

  Good luck with the new computer.

  Any brand or model you purchased now, don't forget to create the recovery disks/drive.

• When I try to send a picture through Windows Live Mail I get an error message telling me to delete the picture, and then try again.

  When I try to send a picture through Windows Live Mail I get an error message telling me to delete the picture, and then try again.

  original title: RECEIVES the MESSAGE of ERROR WHILE SENDING AND RECEIVING PHOTOS

  Hello Jane,.

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

   

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• When playing xbox live and someone turns on the laptop he loses the connection to the server and then resets modem

  when im playing left 4 dead 2 versus and kids turns to the top turn of the page to play counterstrike he says: interruption of the connection to the server and then resets my modem or router

  I had the Charter to come out, they ran the new line and I always have problem help me please

  Hello

  ·         What operating system do you use?

  Step 1:

  I suggest you to update the firmware of the router on the manufacturer's Web site and verify that it helps. For more information on how router update contact your router manufacturer's support site.

  Step 2:

  Try to assign the static IP address for an Xbox 360 and the laptop and check if it helps.

  To assign a static IP address for your laptop:

  one) click Start > Control Panel > network and Internet > network and sharing Center and click on change adapter settings.

  (b) select your network adapter. (if you have more than one list) Right-click on the adapter and choose 'Properties' from the list.

  (c) under "this connection uses the following items," click once on "Internet Protocol Version 4 (TCP/IPv4) to select it and then click on the button 'Properties'.

  (d) click the radio button for "use the following IP address:" enter the static IP address, you want to use in the IP address box.

  (e) press "Tab" when you are finished and that the "Subnet mask" value should automatically populate with the correct value.

  (f) Finally, you will need to enter the IP address of your default gateway and the IP addresses of your favorite servers and auxiliary DNS.

  (g) the default gateway is the IP address of your router. The DNS addresses are usually provided to you by your ISP.

  (h) click on 'OK' to save your changes, and then click 'OK' again on the local area network connection properties window. You have now assigned to your computer a static IP address in Windows

  To assign a static IP for Xbox:

  (a) turn on the console and press "Guide" on the controller to bring up the quick menu.

  (b) go to the 'Settings' tab, then open "System Settings." The dashboard opens and the 'System settings' menu.

  (c) select 'Network settings' in the menu new. Another list of menu options is displayed. Choose "Configure network." This opens the network configuration menu, where you can set a static IP address. Note your IP address, subnet mask and gateway.

  (d) change your settings 'IP' to 'Manual' instead of 'automatic '. This will allow you to manually select your IP address and other settings. It can also erase your current settings, that's why you need to write.

  (e) change the last three digits of the IP address. Enter the same numbers for the subnet mask and the gateway that you saved in step 3. Press 'B' to exit from the menu and save the changes

• I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  Hi gullo56,

  Welcome to Microsoft Answers Community Forums.

  To help you better I would ask,

  a. If it functioned very well under Windows 7 before?

  ·         I suggest you to disable your firewall security software and check if you are able to play the game.

  From the link below, what I discovered is Microsoft Flight Simulator 3 is not completely compatible with Windows 7, but I would suggest that you follow the steps below to help troubleshoot your problem.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=combat%20flight%20simulator%203

  1. as Microsoft Combat Flight Simulator 3 is supported by Microsoft Windows Vista to function normally, I suggest you run this program in Vista compatibility mode in Microsoft Windows 7.

  For information about how to run a program in an earlier version of Windows, visit the link below,

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  2. you can also try to reduce the hardware acceleration and check if it solves your problem,

  1. Click Start-> Control Panel-> appearance and personalization.

  2. under customization, click on adjust the screen resolution.

  3. in the display settings dialog box, click the Advanced Settings button.

  4. in the monitor Properties dialog box, click the Troubleshooting tab.

  5. click on the change settings button.

  6. in the Security dialog box, click on continue.

  7 move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.

  8. click on OK.

  9. restart Windows.

  Hope this information helped you.

  Kind regards

  Arona - Microsoft technical support engineer

  --------------------------------------------------------------------------------------

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Deleting a folder gives this message: check the location of the elements, and then try again

  I would like to help to get rid of a file. The folder used to hold pictures, but is now empty. I tried the normal removal methods. I also tried to remove prompt all to nothing does not. I tried to use Fileassassin, but it will not work with a folder and also Fileboss time to rename it to 8.3 and remove it but neither work. He will agree to be cut and pasted from images of office etc but will not delete in these two places. Similarly, it can be placed in another folder but still will not remove. Move a file inside does not either.

  Suggestions welcomed!

  Check if you have full permissions in the folder and also owner if necessary. Move the folder to your desktop.  Right-click on the folder, and then click Properties, click the Security tab.  Add your username in their own right.  Click Advanced and add your username in its own right to the section of special permissions.  And then click the property tab and make you the owner.  In all three cases, remember to check the box to apply it to all files and subdirectories.  That should give you the permission to delete the file.  If this is not the case, check all the tabs property, including safety to check that nothing is checked to refuse the removal.  The following should help you with this:

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  If this does not work, tryUnlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml that removes folders and files and can work where other programs have not.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a laptop with Vista Home Premium installed. My plan is to install Win 7 and then move on to Win 10.

  Original title: Vista to Win 7 to win 10

  I have a laptop with Vista Home Premium installed.  My plan is to install Win 7 and then move on to Win 10.  I have a new full version of Windows 7 Pro SP1 with an activation key.  I have experience update to Win 10 of Win 7, but worry about the installation of Win 7 over Vista.  I guess I have to do a clean install.  There is no problem to meet the minimum requirements of 10.  Can someone give me some advice on the start-up of the conversion of Win 7?  Just insert the disk?  Everything has been backed up and it's ready to go!  Thank you.

  Since the family migration to Windows Vista Premium to Windows 7 Professional it will install a clean place, why not simply use your Windows 7 Professional product key to perform a custom Windows 10 Pro install from the go?

  I don't see the need to bother installing Windows 7 Professional.

  To learn more:

  How to download official Windows 10 ISO files

  then

  How to: perform a customized Windows installation

  To learn more:

  How to install and activate Windows 10 using your Windows 7 or Windows 8 product key