Unable to get double printing to work. new HP Officejet 6500 has e-all-in-one.

Similar Questions

• Pages come out White HP Officejet 6500 has e-all-in-one printer.

  I have a HP Officejet 6500 a e-all-in-one printer (product # CN555A), and I had problems printing for a while.   I'm working on Windows 8, although the same problem occurs with a Windows 7 laptop that I use sometimes.
  Printer goes through all the movement of printing and pages come out sometimes very thirsty or Virgin (illegible). At the beginning, once in a while it would happen, and once the printer is rested for a few days, it works again. Now it happens all the time and I can't print.  I did ALL the steps of troubleshooting hp and nothing works.   A few days ago, I managed to have it print a little darker, but it mainly printed in gray-greenish, but after the second page, he just disappeared again to nothing.  I think it may be something on the channels contained in the cartridges of ink to the page or something like that.  Can someone help me understand this and the difficulty of my printer?

  Thank you
  )

  Considering that the yellow is almost full and is printing very well, there is actually a small chance that the low level of ink you see (approx. 25%) this is dried up in the cartridge itself.  Think of the ink as a former condiment that has been in your refrigerator for a long time.  When there are more things in the container, it is less likely to dry up, but when you have only a little inside, the air-to-ink ratio increases the chances of this being actually what caused this.

  Although it is cheaper to do the printhead of soaking, it's also much more risky than buying the new ink first.  I highly recommend making sure that you have replaced the low ink cartridges before trying the latest possible stage.

  Certainly, it is probably due to cleanups of printhead, print tests and other basic troubleshooting steps that caused you to be low on ink in the first place.  Maybe double check on the return policy of the store about the ink you buy maybe not a bad idea, either in case you do not buy, does not print, you are soaking the print head and then it also fails.

  Better to be prepared for the worst but hoped that the simplest solution is the best one (Occam's razor) is what I mean by all this.  Keep me posted on what you decide to do.  * fingers crossed *.

• HP Officejet 6500 - E709n: power adapter for the HP Officejet 6500 - E709n wireless all-in-one printer

  I need a new power adapter for my HP Office 6500 - E709n.  Does it matter if I buy an adapter for a model E709a?  Will it work on the E709n?  The power adapter E709a looks identical in the photos.  Thank you.

  Hello

  In fact, they use the same adapter as shown:

  http://support.HP.com/au-en/document/c01636617

  Note: Make sure the 2 sections

  Models all in one HP Officejet 6500

  and

  Power specifications

  Kind regards.

• The double-sided printing functionality does not work on my Officejet 6500 has more.

  Initially, it worked, but now it doesn't.

  Please read this post then provide some details.  What printer model? What operating system? You may need to enable the duplex module, as described in the Duplex printing Vista/Windows 7 Guide.

• HP Officejet 6500 has more all -: want to print, get fax screen etc.

  I am trying to print a document, shows data, fax sending fax etc how do I cut the portion of the printer fax?

  @dman51

  Assuming that the full feature software is installed, the following may be enough to solve:

  Set as the default printer

  I don't know how 'disable' the fax software - if you do not set the parameters, fax is essentially disabled the fax program does nothing - useful or harmful.  You need a landline connected to use fax - leave the disconnected landline and fax is essentially disabled.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Error 1053 of the print spooler for HP Officejet 6500 a Plus All in One printer

  I get this error every time I try to install this printer. When I try to start the spooler in Services file, this error pops up. I ran a diagnostic and found that there may be errors of registry key in some files, but I don't kn Ow how to get rid of them. I tried every way start the print spooler, but he won't let me. Other diagnostic tools do not work because I can't even install the printer of dam. Help!

  The print spooler is a Microsoft services so that they would be the best people to talk to.  Most likely, the registry keys for the print spooler has not installed right.  My advice would be to format and reinstall the OS, but you can see what Microsoft has to say before doing this.  They may know a solution for this specific error.  Here is a link to a discussion I found on Microsoft Community on this issue.  I hope this helps.

  Print spooler starts windows 7 error 1053

• Analysis application does not work for HP Officejet 6500 has more.

  My OS is Windows Vista 64-bit. Image of Windows service is not running. I followed the steps to start the dependency services. Still will not start. Error message 1068.     Any suggestions?

  Hello FixN

  Try the following steps to ensure that all services are running. RPC end point mapper may not show it seems have found under Windows 7 but not Vista. You are using Vista as the original poster?

  1. type services.msc in run or search and files program
  2. scroll the page up to the WIA Windows Image Acquisition
  3. make sure that the service is running. Click on stop and then restart to ensure
  4 restart the computer
   
  Restart the services of dependencies:
  1. Click Start, in the search box type "services" without the quotes.
  2. scroll down until you see Windows Image Acquisition (WIA).
  3. double click on it and go to the Dependencies tab.
  4-2 services must be listed.
  5. close this window and look for the remote procedure call (RPC).
  6. make sure it's on manual or if it is enabled automatically, just leave it. Make sure the service is started.
  7. go to hardware detection kernel and Double click.
  8. set the Startup Type to manual and click on apply.
  9. you should be able to start the service by pressing Start.
  10 now, you are done and the Twain Manager must work and gives you is not a mistake.
   
  Check the dependencies or sous-dependances:
   
  Right-click WIA (Windows Image Acquisition) by selecting the first properties, and then click the Dependencies tab. It should list: remote procedure call and detection of Harward Shell
   
  Under the CPP he then list Launcher process for the Service DCOM and RPC Endpoint Mapper to go back to the main list services.msc and then right click, will launch all the items listed as dependencies or void dependencies under WIA

• OfficeJet 6500 has 710n all LEDs on the front panel are flashing and nothing works. Any suggestions?

  As indicated in the subject line, all of the lights on the front panel are flashing and nothing works.  Will not communicate via cable or wireless. Green light is visible on the power supply. Suggestions?

  It seems that the printer needs to be reset.

  Cut the power to the printer for a minute. Reconnect the power to the printer and turn it on.

  Does have an effect?

• My new HP Officejet 6500 a does not appear in the printers and faxes

  The HP Officejet 6500 a printer is a wireless all-in-one with fax, print, copy, scan.  I don't intend to use the fax and who did not put in place.  But what displays in the start menu > printers and faxes is the fax but not the printer.  So I can't select it is my default printer.  This is the main problem.

  Which is OK - when I print (with the help of this device or another my printer), since the print page I can select which printer to use and as well the new printer and fax are displayed here.

  Misc info: my other (old) printer is HP psc 1300 all in one, is not wireless and includes a fax machine.
  I have Windows XP SP 3 v.2002.

  Hi desert Ginny,

  I suggest you to install the drivers by downloading it from the following HP support link and check if it helps:

  Download drivers - HP Officejet 6500 has e-all-in-One Printer series

  Also, take a look at the following link:

  Failed to configure a network printer by default for all Windows XP users

  I hope this helps.

• I can't get my printer to work

  I can't get my printer to work. It will not print anything it is on and connected but does not print.  A sign error appears when I click on printers and devices, and wrote that a document keeps the printer from printing, however, it's the doc that I just tried to print, so I cancel, and then it shows that the printer is ready, but when I try again, the same thing happens.

  I can't get my printer to work. It will not print anything it is on and connected but does not print.  A sign error appears when I click on printers and devices, and wrote that a document keeps the printer from printing, however, it's the doc that I just tried to print, so I cancel, and then it shows that the printer is ready, but when I try again, the same thing happens.

  First, clear the print queue of the printer.  If that doesn't work, post back with the complete error message, the brand and model of the printer, how it is connected to your computer and the version of Windows you have, including the service pack.

  Clean the print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line (don't forget the quotes)

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

• How to install (gdiplus.dll) to get the printer to work?

  HP Presario cq62 notebook, HP deskjet 3845, windows7, error message reads as follows: gdiplus.dll is missing. How to install this to get the printer to work?

  Hi RDT49,

  Gdiplus.dll error messages may appear when using or installing some programs when Windows starts or shuts down, or maybe even during a Windows installation.

  The context of the error in gdiplus.dll is a key piece of information that will be useful while solving the problem.

  Cause of Gdiplus.dll errors

  Gdiplus.dll errors are caused by situations that lead to the removal or corruption of the gdiplus.dll file

  In some cases, gdiplus.dll errors could indicate a problem, a virus or malware Registry problem or even a hardware failure.

  I recommend you contact the manufacture of your computer to help solve the missing DLL file problem.

• HP Laserjet Pro M251nw color: How can I get my printer to work with Windows 10

  I can't get my printer to work, it is installed, I have updated the drivers, I get a message that it is not connected - I did it is certain

  Hi @jotsol,

  I see you are having problems printing from Windows 10. I'd love to help you.

  I wasn't sure if you meant that you run Windows Update to update the drivers or downloaded the last.

  I would say to uninstall all old software of the printer, if you updated to Windows 10. Then, download and install the latest drivers from HP. color HP LaserJet Pro 200 M251 series full feature software and drivers.

  Download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically.

  How is the printer connected? (USB, Ethernet, WiFi)

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you appreciate my efforts, please click on the "Thumbs up" button below.

  If there is anything else I can help you, let me know. Thank you.

• How can Lexmark Z35, I get my printer to work with Windows 7?

  How can I get my printer to work with Windows 7?

  By looking at a site help on the lexmark, however this not is not supported under win7

• HP Officejet 6500 has MORE E709a double SIDED AUTOMATIC printing

  Hello
  My HP Officejet 6500 a PLUS E709a printer allows you to print automatically on both sides and now I have to do it manually. I tried to implement the duplex preferences automatically and the option is no longer there. I use a Windows 7 operating system

  It is now more clear...

  The HP Officejet 6500 has more (E710n) provide automatic duplex printing.

  For some reason, you have a different printer driver to a different model which do not provide for printing automatic duplex (HP Officejet 6500 (E709a).

  Be sure to remove the existing of the 6500 E709a by right clicking the icon. then click on remove the device and restart the PC.

  Click Start > all programs > HP

  Can see you the HP Officejet 6500 has more (E710n) listed?

  If so, rnter this folder and click on reconfigure device / device update / update IP address and follow the steps to reconfigure the device.

  If you can see only the HP Officejet 6500 (E709a) listed, it means that you have incorrectly installed software.

  Make sure to remove the installed printer software HP through the control panel > Profgrams and features > uninstall a program.

  Then download and install the appropriate software below:

  http://ftp.HP.com/pub/softlib/software12/COL34830/MP-86366-3/OJ6500_E710n-z_231.exe

  Kind regards

  Shlomi

• cant WiFi connection HP Officejet Pro 8600 e-all-in-one printer to internet

  I can't get WiFi HP Officejet Pro 8600 e-all-in-one printer connect to internet... at least I think that's the problem. I followed all the instructions on the HP print and Scan doctor as well as solve problems of failure to install HP. My router is working fine for everything else and I entered the router the static address for the printer.  It seems that my printer thinks it's connected to my WiFi (Ihave WPS it several times), but when I type there nothing appears in my IE IP address. My router does not see the printer either. I have the latest driver installed on my computer. I suspect that this may be a router problem: new Asus Double 450 Mbps N Router router (dual - band, but it appears my router uses the 2.4 Hz band to connect with WPS). Windows 7 64.

  Any help is appreciated!

  Hello NRHII,

  Welcome to the HP Forums!

  I understand that you are unable to connect the Officejet 8600 via a wireless connection. I will do my best to help you! I would recommend power cycling the router, the printer and the computer:

  (1) turn off your printer
  (2) unplug the power cord at the back of the router
  (3) restart your computer
  (4) wait less than 60 seconds, reconnect the power cord to the router
  (5) turn the printer, wait for the computer to turn on

  The wireless light blinking on your printer? If so, please reconnect the wireless on your printer using the Wireless Setup Wizard: (this information is declared here.)

  1. On the touch screen of the printer, press the right arrow key ( ) to display the second navigation screen.
  2. Tap the Installer icon ( ).
  3. Tap network , tap the wireless configuration wizard , and then press continue . The printer looking for available networks.
  4. Tap the name of your network and then press OK .
  5. If you are prompted, enter the password for the network, and then press OK . The printer connects to the network.