Paintings of the ADF will not refresh

Hello

I am a beginner of the ADF and I use JDev 11.1.2.2.0.
It's my "set up." I got a page fragment (jsff) that has 3 legs, on the first 2 there are two 2 the two tables and one exists on the 3rd.
Every table has an additional column where there is a commandbutton control.
When you press the button, a record is deleted in the table this table DB.

What I've tried so far:
-Partial trigger for the button on the table
-Partial target in my grain of support
-Refresh my entire page using:
          FacesContext fc = FacesContext.getCurrentInstance();
          String refreshpage = fc.getViewRoot().getViewId();
          ViewHandler ViewH =
          fc.getApplication().getViewHandler();
          UIViewRoot UIV = ViewH.createView(fc,refreshpage);
          UIV.setViewId(refreshpage);
          fc.setViewRoot(UIV);
But not a single trick works.
When I run my new page (Undeploying and deploy again), I deleted the records disappeared.

Any suggestions?

get the handle to the table iterator. .to leave who get the ViewObject then use executeQuery().

DCIteratorBinding binding = ADFUtils.findIterator("ViewIterator");
ViewObject vo = binding.getViewObject(); // you can as well execute the query for the iterator also - binding.executeQuery();
vo.exeuteQuery();

Tags: Java

Similar Questions

  • Office jet pro 8500 a: copy using the ADF will not work.

    I place the document in the top loader, it seems to be recognized by the machine, when I press the copy, it makes a funny noise but the document doen't go through the driver and the machine ask me to reload the document. A copy is fate. I checked if any blocking or jamming of paper but it's all clear.

    Been through the different troubleshooting steps, but nothing helped.

    Thank you very much

    Hello FROGYBEAR and welcome to the Forums of HP, I hope you enjoy your experience!

    I see from your post that you are experiencing supply problems.  I would like to help with that!

    I recommend you to perform a power reset. Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

    I would also suggest using this document on When you use the ADF, one "original jam: clear jam and press OK' Message displays on the all-in-one."  I understand the questions you see are a little different, but the steps should help solve that.

    Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

  • Different applications of the ADF will not work in the same browser window

    Hello
    When I recorded with an application and then open another browser window and I just record in the second request. Back to first and take any action and it shows error, as if my session has expired.
    I put a ViewHandler method sobreescibe restoreView (FacesContext FacesContext, String viewId) as follows:

    UIViewRoot root = null;
    root = parent.restoreView (FacesContext, viewId);
    If (root == null) {}
    root = createView (FacesContext, viewId);
    }
    Returns the root;

    But this solution is temporary, because I need to create a view of all the data you had in the PageFlow, for example, the results of a search.

    Anyone know if this is a bug in the adf, or have I missed some settings?

    The versions that I work with are:

    JDeveloper: 11.1.1.3.0
    WebLogic Server: 10.3.3.0
    ADF:
    Oracle-Version: 11.1.1.3.37.56.60
    Oracle-Label: JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660
    Oracle-Builder: iibuild on asbld15 Linux

    Hello

    I had a similar problem. I solved this way:
    -create the weblogic.xml (deployment descriptor Weblogic--> located in JDeveloper when you tap new "Général Deployment Descriptor") for your ViewController project.
    -set the cookie path to a unique name (for both apps)

    example:

    

  
    /myapp

    and the demand for /myOtherApp ;)

    Martin

  • Changes to the template will not refresh dependent files

    I check a file template with its dependent files to my server using Dreamweaver FTP. I'm making some changes and save. It is supposed to invite me to update dependent files. But it doesn't work. If any changes are applied to the set of files by using the template. I also tried to update the pages manually by clicking Edit > templates > update of the Pages... But DW is looking in a different way to find models, rather than search in the directory where the server is installed. What is the best way to make this work?

    Is your site correctly defined in Site > Manage Sites?

    You have the file Template.dwt in a folder models in your local site?

    Are you sure this is the right model for this project?

    You have all the child pages in your local site folder?

    It is important to understand that the models do nothing on the web server.  They are the property of DW and only work on files of your local site.

    Nancy O.

  • Apps will not refresh when installing Apps is disabled in the Restrictions.

    I am limited to the installation of applications on the iPhone of my son.  The few games I welcomed will not refresh automatically.  I have to go over obstacles and activate app install and then perform the update.

    Is there a way to get around this - I have auto update turned on, but the Restrictions appear to substitute.

    Is this a bug?

    Right - if you have restricted the Installation of applications, it will limit any installation, including the installation of updates.

    Sorry,

    GB

  • HP 8500 has more scan not scan - I hear a fast spin and the book will not draw in the charger

    HP 8500 has more scan not scan - I hear a fast spin and the book will not draw in the charger. I tried a reboot, including disconnect the motor from the power analysis. A software update was just pushed through today as well, but the problem with the scanner was before this update. This update took place after the power has been turned off, then on again.

    The problem occurred this morning during a prior scan + back. I heard a click or pop/fast spin, something that indicates something was wrong, when he tried to feed on the 1st backsheet through for the scan of the back. Now, it won't take what anyone, even to make a copy using the feeder.

    When I look at the roll holder bar above paper, I noticed that it does not drop down to make contact with the paper he move to the scanner itself. I remember having this problem once before - there are 2 years, while the warranty was still in effect and does not remember how it was resolved.

    Any suggestions would be welcome. I don't want to buy another printer just to get the scanner to feed again. The printer itself is fine and scan from the bed is not affected.

    For anyone interested, I sloved the problem of roller scanner do not push the paper into the ADF.

    I turned off the printer last night. Today, I removed the power cable at the back of the printer and then unplugged the power cord from the wall. It was off for about 30 minutes. I reconnect the cable to the printer and the wall, the printer running and waited about 10 minutes. So tired the charger scanner again. It worked and I don't know why.

    Yesterday, I tried a version of what I found in the documentation for HP support. He said to do, but not to turn the printer off first. He has not worked for me.

    I don't know if my path has really had no effect on the results, but it works now and I don't have to think about buying a new printer for awhile yet. I like this idea!

  • Try to burn a CD. The system will not recognize the blank disc or let me burn__

    Try to burn a CD. The system will not recognize the blank disc or let me burn... says there is no disc inserted

    Hello

    Have you tried to close all programs and then insert the disc? Restart the 1st and then try it.

    If no joy:

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • Why the clip will not play in the window of the observer?

    Hello world. It's me again. So, I just started working on a project, and the clip will not play in the window of the observer. In the timeline panel, I see that there are images to play, but the Viewer is black when I try to play. I have temporary can solve it by leaving FCPX and opening it again, but after a few minutes, the display window stops again, and it's a pain to have to do every time so I can watch a few minutes of film. Just so you guys know, do it mode multi-cam, incase that has an effect on it. Thank you very much!

    You have the options of display Angles show the value? You are in the editor of the Angle or the project timeline?

    Russ

  • I can't access my iMac, is locked and the keyboard will not connect. Magic mouse works OK. What should I do?

    Hello, how can I access my iMac that is locked and the keyboard will not match (new batteries and LED is blinckin). The Magic Mouse works OK. What should I do?

    Buy or borrow a USB keyboard and connect you with that. Once logged in go to your bluetooth preferences and pair it with the keyboard.

  • Status bar at the bottom of the screen will not allow

    Status bar at the bottom of the screen will not even when I try to activate with display > verified status bar

    This has happened

    Each time Firefox opened

    Hello Darryl.

    It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

    Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme and this one for plugins.

    If you need help with one of your modules, you will need to contact the author.

  • iPhone 6 s more. The music will not play an entire album. Just of repetitions the first track.  How can I get it to play all tracks in order?

    iPhone 6 s more. The music will not play an entire album. Just of repetitions the first track.  How can I get it to play all tracks in order?

    In-app music, press the "mini player" (the narrow ribbon at the bottom showing the song that is playing).  Which opens upward from the view of work full screen of the song being played - down at the bottom of this screen are icons for shuffle and repeat, press Repeat until the gray background disappears.

  • After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

    After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

    When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

    These must be run as administrator. If you have only one user account, you are the administrator.

    Run the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    The title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

    Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

    Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • trying to remove a Malwarebytes(anti-malware) but the computer will not be aloud, how to remove it?

    trying to remove a Malwarebytes(anti-malware) but the computer will not be aloud, how to remove it?

    See if this helps:-

    http://www.ComputerActive.co.UK/CA/download-review/2040736/remove-unwanted-software-Revo-Uninstaller-19

    If she please vote as helpful.

    I use the software that you want to remove and would recommend not removing it because 2 times last year he picked up the items that Microsoft Security Essentials does not.

  • Account of Hotmail, when I connect to the page will not download?

    Once I connect to the page will not download?

    Hello

    Please provide all the information we need to help us help you.

    How to ask a question
    http://support.Microsoft.com/kb/555375

    -------------------------------

    Answers is a peer group supported and unfortunately has no real influence on Hotmail.

    HotMail has its own Forums, so you can ask your questions there.

    Windows Live Solution Center - HotMail - HotMail Forums Solutions
    http://windowslivehelp.com/

    Hotmail - Forums
    http://windowslivehelp.com/forums.aspx?ProductID=1

    Hotmail - Solutions
    http://windowslivehelp.com/solutions.aspx?ProductID=1

    How to contact Windows Live Hotmail Support
    http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

    Windows Live Hotmail Top issues and Support information
    http://support.Microsoft.com/kb/316659/en-us

    Compromised account - access unauthorized account - how to recover your account
    http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

    Hotmail hacked? Take these steps
    http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

    I hope this helps.

  • The computer will not send messages I type, but it receives messages correctly

    Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

    the computer will not send messages I'm typing... but he recedives messages aok...

    Hey Keithkohrs,

    Usually, this means that outbound connections to the server are not properly Setup. Try contacting your email provider to ensure that your server settings are all correct. We can try to help you get the server settings appropriate if you let us know who provides your email address and what program you use as an email client.

    Hope that helps.

Maybe you are looking for