Palm Centro - Logging off Internet

Similar Questions

• Palm centro completely off

  my palm centro was about half of its battery life. I was on a call and when I'm done I went to plug my phone. It makes a beep funny and completely off now. I see the little red light in the corner, but I tried to remove the battery, and I tried to hot sync only and I got refill for quite awhile and still nothing. It is quite dead. can someone give me some ideas on how to solve this problem? or maybe what has caused this?

  Oh and I have no 3rd party software on it except that it came with and it's about 3 months of sprint.

  Thank you.

  Hello and thank you for using the Palm Help Forums!

  If the device is loaded and does not when you press the power button (red button) you need repaired or replaced.

  Message is about: Treo 800w (Sprint)

• Palm Centro Vodafone - unable to connect to the Internet

  Hello

  Day before yesterday I bought a Palm Centro. The internet does NOT work and everything. When I tried to connect, I get the following error message:

  Incomplete installation. Please check your network settings (0x121A)

  If I put the same SIM card in my Samsung and Blackberry handset, everything works fine. One can show a few lights on the same?

  Would be grateful for your quick response!

  With our thanks!

  CentroKid

  The error that you declare States in order to check these settings on the Centro. If they are correct and that the SIM card works in another phone, I would say a hard reset to return to the centro to factory settings and then try again.

  The hard reset erases all data on the Centro so make sure that you have Sync to back up your data.

  Click on the following link for the Web page of kb.palm.com for the article about reset procedures.

  http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=887

• When a user logs off Windows 7 x 64 session, the rest can not access the internet until the restart network card

  Hello! I found a problem with my system: when a user logs off Windows 7 x 64 session, the rest can not access the internet, until restarted network card. Reinstall NIC driver did not help. Problem appears on a built-in adapter, in the motherboard and a separate PCI card too.  Same router via its web interface is not accessible. Windows cannot automatically fix this problem after trying to diagnose a problem with his problem Diagnostic tool. After the diagnosis in the DETAILS window, MORE tests, it displays a message like this "computer remote can not receive a connection via the Internet (HTTP) Service Port". "Unplugging" a corresponding Local network connection and then reconnect solves the problem immediately. Switching between users, when two of them are connected do not cause this problem. Important: the problem occurs in the account of the user who was logged on the system FIRST after the PC was on, when the user disconnected on newspapers of a SECOND. If the SECOND user is logged in and the FIRST user disconnects, SECOND can still access the internet. It depends only on the sequence of the user's record, not on the particular user name. And one more interesting fact: after each user registered on and outside just for once, the problem seems to disappear until the PC is turned off and turn it back on!

  System details:

  Motherboard: ASUS P8Z77-VLK
  CPU: Intel Core i7 3770 K
  RAM: 8 GB
  OS: Windows 7 x 64

  Hi, Mahesh,

  and thank you very much for your help! Update firmware driver and router LAN did not help me get rid of my problem, but greatly improved my experience of networking in general. Anti-virus software was not guilty, also, but! I found the "iControl" network software, installed as part of Sogiciel 'AI Suite II' (that came on the CD of motherboard ASUS driverssoftware), runnning and causing not only the problem mentioned above, but would also decrease upload speed up to 0.3 MB/s, when download passes to nearly 100 Mbps! Moreover, searching the Internet, I have found a lot of complaints about the behavior of this software, so that people watch you the occasional installation of this piece... sweet ;) As "iControl network" has been uninstalled (not only turned off in the settings of 'Ai Suite II'!), I'm totally happy with my system performance.

  Best regards
  Greg

• Ntuser.dat locked by system after log off

  tons of stuff on the internet about this but no real difficulty. We currently use roaming profiles on a 2 k 3 Server for our Citrix configuration. We met the issue of temporary profiles created because the ntuser.dat file is locked by the system in their ordinary account profile. This has actually been a problem for several years to the contract and I am now cleaning.

  We have the GPO to set to point to a share to store profile data, refers to the configuration of the roaming profile.

  first thing I noticed was tons of SID keys under HKLM\Software\Microsoft\Windows NT\Current Version\Profile list. I deleted all these keys and profiles on the servers of applications under Docs & settings. now on the first login my account has been created on the server, SID created key. after disconnection of application, he removed key SID in the registry, writes data to the profile on hand but profile left on application server because ntuser.dat has been locked. then, the next time you connect, it starts to create profiles of temperature.

  Maybe it's a little much info for the real problem at hand, but I wanted to explain the Setup here incase it helps.

  does anyone have a solution for this?
  UPHClean is not an option because we use roaming profiles. they are always locked.

  or does anyone have a script that I could use that force a version of the log off?

  any info would be much appreciated. Thank you guys

  Hello

  You can ask your question in the TechNet Forums: http://social.technet.microsoft.com/Forums/en-US/home

  Thank you.

• Computer not finding networks, stuck on the Logging Off screen in Vista

  For the past two weeks, if I simply close my laptop while it is running, most of the time when I try to open it up my wireless network does not connect automatically. I have to click 'Connect to' in my Start menu and manually connect to the network. The only problem is, sometimes it will fail to find a network and when I try to manually go to 'Connect to', it does nothing. Nothing comes up at all. I have to restart my computer. Once I try to restart, it sticks on the screen "Logging Off". I also tried to disconnect just opened a session back, but it's still stuck on this screen. I am then forced to make a hard closed down by holding down the power button.

  Any ideas?

  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Hello
   
  1. you broadcast the SSID of the wireless network?
  2. have you idea of changing the settings of the preferred wireless networks?
   
  Method 1.
  Try to change the order in which your computer connects to the network.
  The list of networks connected to before is sometimes referred to as your preferred wireless networks or your preferred list.
  a. open manage wireless networks by clicking the Start button, click Control Panel, click Network and Internet, click Network and sharing Center, and then, in the left pane, click on manage wireless networks.
  b. your saved wireless networks is displayed. To change the order in which your computer connects to networks, drag the networks upwards or downwards in the list.
  c. to change preferences for the network, right-click the network, and then click Properties.
   
  Method 2.
  Also, check out the articles below and check.
  http://TechNet.Microsoft.com/en-us/library/bb726942.aspx
  http://support.Microsoft.com/default.aspx/KB/929661
  
  Method 3.
  Also the question of trial in the State of clean boot and check. You can also check the shutdown problems in the boot.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   
  Method 4.
  Also check the eventviewer on stop error logs.
  Type eventvwr.msc/s in the address bar.
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

  For more information on event viewer, see the articles below:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Palm Centro 690 - for Verizon

  Hello - I hope someone can help me - I recently received my new Palm Centro Verizon's time which I had for a week now - the problem I encounter is - there are moments that I hit the power button and it lights without problem and there are others that he did a hard reboot - WHY is it that - am I hitting something to turn off completely it?

  There was 2 times already that I have to remove battery and put back on in order to activate the Palm - and

  There has been a couple of times that I've heard almost static, noise and then it goes to a hard reboot-

  Can someone explain to me why this did that?

  Thanks for any help you can offer – I really happy with this unit but if it's something that I can't count on so I'll have to return eventually.

  Thank you all for your help - I don't have your responses so far - but one of the things I did today was to go to verizon and they does not change the phone to me.

  I'm now load - later, I call the 1-800 palm # which is free installation support - I'm nothing to do with this new blow - until I talk with someone, and they also talk through it.

  Thanks again!

  Message relates to: Centro (Verizon)

• Close, do NOT restart, Firefox, WITHOUT reboot (or log off) Windows.

  I want to stop, NOT reboot, all open Firefox windows and tabs, WITHOUT reboot (or log off) Windows. That's all. Thank you.

  Have you tried one of them:

  • the orange button Firefox > output
  • File menu > exit

  If Firefox does not correctly close, he may be suspended during the cleaning process. This article has a few suggestions for this: Firefox crashes or does not - how to fix.

• Windows Vista will not install device driver for Palm Centro

  My PC Windows Vista can't find info from device driver to install my new Palm Centro.  I downloaded the latest version of the Palm software.  Any ideas?  Thank you!

  What version of Vista you have?  32-bit or 64-bit?

  64-bit cannot sync via a cable - only via a wireless (BlueTooth or IR) method.

  Wyrenut

  
  

  Message relates to: Centro (AT & T)

• Brazilian firmwre level Palm Centro

  Hello

  A few years ago Palm released a update for the Brazilian version of Palm Centro that solved a problem whit incoming calls freeze BOUNCING.

  I have the files needed to update the ROM but I forgot how to start the Palm Centro from SD card, as update procedures indicates that it will take to copy all of the files on a SD card and start the phone to the card.

  Can anyone here tell me how to start the Palm Centro from SD card?

  Try the Palm/HP knowledge base article:

  http://KB.hpwebos.com/wps/portal/KB/common/article/5919_en.html

  It happens to be for Sprint phones, but the procedure of update of map memory is detailed.  Hope that does this for you

• Palm Centro will not turn on

  Hello

  I bought a Palm Centro refurbished about 7 months ago. In recent days he refused to turn on at all, so far I have tried pulling the battery for anywhere from 5 minutes to 30 hours and putting again. Same thing every time, the red light comes on, the screen remains blank.

  I have left this phone hoked up to wall charger for more than 12 hours in a row and am quite sure that it is not a battery problem.

  Some information about this phone:

  For a little more than a week before that it would scroll through hotsync indefinitely without any cables that are attached. I would like to pull the battery plug it back and the hotsync cycle jump upwards as soon as he end of initialization, it would then stay in hotsync display 'connect to computer' I would press cancel, after a few mintues it would, then he would cycle all over again.

  He also seems to be corrupted in the diary entry, but appears not hardware related.

  The phone is originally a reman, I purchsed it about 6 months ago and within a few weeks, I noticed that the power button was less than perfect, I ignored a month ago, when she started to I have to pull the battery to end a call the button would not register to hurry.

  I called AT & T and was told that because this AI a reman, they offer only a warranty for 90 days (written near the middle of the team of specialists).

  Any suggestions are appreciated gratefully.

  I doubt simple moisture could cause it to fail--it usually involves the lower part of the phone is dipped in the liquid or a good splash on it.   Users to use hair dryers on low, or ask the phone (with battery removed) under a desklamp which releases gentle heat.

  WyreNut

  
  

  Message relates to: Centro (AT & T)

• Unable to HotSync Palm Centro with Desktop

  I had problems with my Windows XP Professional operating system, with SP 2 installed, & had to reinstall.  Before that my operation of HotSync Palm Centro worked perfectly.  After the reinstallation of the operating system & the Palm HotSync software starts but stalls just after that it starts as follows:

  HotSync progress:

  Package installer makes

  Installation

  Install made Service models

  Install to card made

  HotSync Exchange made

  Agenda is

  Agenda (progress stops at this point to no.

  Address Book synchronization all natural)

  Address book

  To do list

  To do list

  Block-memo

  Block-memo

  Addit

  Media

  Note:

  In the progress of HotSync duplicate entries

  The version number of Palm OS Desktop or HotSync Manager is 7.0.2

  The version of the Palm OS software running is 6.2

  My phone is a Palm Centro AT & T.

  I have done a clean uninstall including registry keys deleting & reinstalled software Palm OS 6 times & followed all the needs of technical support for troubleshooting with nothing doesn't.  I also did a soft reset of my phone for several minutes elapse before replacing the battery.

  I'd appreciate any help you could provide in order to solve this problem.

  Thank you

  Phil

  [email protected]

  I found the solution to this problem with another Member of this forum.

  I downloaded the free program DbFixIt of Pimlico Software, Inc., www.pimlicosoftware.com, & was able to install it on my Palm Centro.  I ran the program & it removed 2 problems of the Calendar database.  After that, the HotSync operation took place without problems.

  
  

  Message relates to: Centro (AT & T)

• Satellite M200 won't stop "Logging off."... »

  Model: Toshiba Satellite M200
  OS: Windows Vista Home Basic

  Problem: I tried to restart the computer and it will not stop "Logging off."... "I tried to turn the computer off and restarting, but every time I restart it I always get the «Off login» window... "and the turning circle that indicates that he is still trying to close the session.

  I would be grateful for any advice on how to close the bloody thing and restart. And, no, I don't have a boot on my disk but have access to a PC so that I could download and burn a.

  TIA

  I think that it s something wrong with the operating system on your laptop
  And in this case the new resettlement would help to solve such problems small system.

  > And, no, I don't have a boot on my disk but have access to a PC so that I could download and burn a.
  I put t know why your laptop did not with the Toshiba Recovery CD, but it would be desirable to restore it to factory settings in order to check whether it is useful or not.

  Good luck

• Windows Vista hanging at "Logging Off" of the prcoess judgment stage.

  At the stop, Windows went to automatically install updates and shut down my Dell portable computer. But he is now stuck at the step "Logging Off" and not shut down, even after hours. When I stopped manually and restart, it just goes back to the "Logging Off" screen and I can't do anything else. Several shops here have said they need to do a thorough cleaning of the hard repair disk in order.  Really? Is there another way to get the computer to block this process?  Thank you.

  Amanda,
  If you are still having this problem then validate with what version of Windows you are using.  First thing to try is to start on the Advanced Boot options , and select the last known good configuration.  If this does not work, then try to start safe mode.  Let us know the status.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista - stuck on logging off the screen

  I have this same problem with Vista Home Premium that others have had.  When I tried to shut down the computer laptop last night, he is stuck at logging off-page - with the active circle always renewable.  After 20 minutes or so I was tired so close by using the power button.  This morning when I turned on the laptop, he went to the same page of disconnection. 3 hours later, it's still there!  My technical knowledge is, to say the least, "limited."  I tried to open safe restart mode and pressing F8, as suggested on other threads, but which didn't work - I can not go beyond the logging off the screen. How can I solve this?

  I had the same problem... This method works.

  Turn on the computer and when the screen shows recovery Windows press the space key.

  You will be presented with 2 options - either to continue with system resume or to remove the Hibernation file and start with primer system - choose the second option - you're fixed!