Palm Centro will not turn on

Hello

I bought a Palm Centro refurbished about 7 months ago. In recent days he refused to turn on at all, so far I have tried pulling the battery for anywhere from 5 minutes to 30 hours and putting again. Same thing every time, the red light comes on, the screen remains blank.

I have left this phone hoked up to wall charger for more than 12 hours in a row and am quite sure that it is not a battery problem.

Some information about this phone:

For a little more than a week before that it would scroll through hotsync indefinitely without any cables that are attached. I would like to pull the battery plug it back and the hotsync cycle jump upwards as soon as he end of initialization, it would then stay in hotsync display 'connect to computer' I would press cancel, after a few mintues it would, then he would cycle all over again.

He also seems to be corrupted in the diary entry, but appears not hardware related.

The phone is originally a reman, I purchsed it about 6 months ago and within a few weeks, I noticed that the power button was less than perfect, I ignored a month ago, when she started to I have to pull the battery to end a call the button would not register to hurry.

I called AT & T and was told that because this AI a reman, they offer only a warranty for 90 days (written near the middle of the team of specialists).

Any suggestions are appreciated gratefully.

I doubt simple moisture could cause it to fail--it usually involves the lower part of the phone is dipped in the liquid or a good splash on it.   Users to use hair dryers on low, or ask the phone (with battery removed) under a desklamp which releases gentle heat.

WyreNut


Message relates to: Centro (AT & T)

Tags: HP Tablets

Similar Questions

  • Palm TX will not stop

    Palm TX will not turn off after a soft reset. After the soft reset, the screen is stuck on the "Palm Powered" gray screen and stays there.  Time to do a hard reset? Was chicken so far.

    Did the warm reset several times but no luck. Did the Hard reset and the Unit came through very well. Happy I saved enough recently and had my photos duplicated in the card slot. Thanks for your help!

  • TREO 755 P HEEEEEELLLLLLLLLP! Phone will not turn...

    Lately my 755 p will reset on its own, but it always comes back to the top it's very annoying. Juice my phone reset itself again, but now it will not turn back. It keeps going back and forth between the 'electric access' screen and the "palm". I took out the battery and left for several minutes, but I still get the same screens. Anyone has any suggestions on how to fix this shit? I'm really starting to hate this phone.

    You will need to hard reset the unit. KB. Palm.com enter article 887

    Message relates to: None

  • I have 6 phone is dead.  Will not turn back on

    I have 6 phone is dead.  Will not turn back on

    See Troubleshooting in the paper support. If your iPhone, iPad or iPod touch won't turn on - Apple Support

  • Tecra M9 - sometimes that it will not turn on

    Hello.

    I have a Toshiba Tecra M9 who has a problem. Sometimes it will not turn on. You must remove the battery and press the power button. When it loads will work fine until I have move or take it upward and then hangs and crashes. Then, you must take the battery out so he can turn it back on if it will be in all.

    I tried to reload xp, tried without battery, tried a known good ram in both slots, a different hd and took part to see if I can see something loose, I have now run out of ideas.

    any help would be good

    Thank you

    Hello

    Which is really strange, buddy... In my opinion, that sounds like a hardware problem, what do you think?
    You should contact a technician for laptop (authorized service provider). Guys can verify and Exchange defective equipment parts. Maybe a mailfunction of the motherboard or the CPU

    By the way: you have updated your BIOS? If this is not the case, to do this, first!

  • I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

    I went to pay my own Bill Bill of my family, now nothing will work if I'm on WIFI, no internet, my IMessage/Facetime will not turn on. I've tried everything. Help?

    Honestly, this sounds like a problem of carrier. Are you able to make/receive calls or send and receive text messages? I would first check with the carrier to make sure that your phone is still set up to use mobile data. Something was accidentally deleted when they merged your bills.

  • K010 ENVY: my laptop will not turn off

    Hello

    When I shutdown/hibernate/standby/resume my laptop, it will die completely.

    All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

    And when I try to Hibernate, everything is ok, but I have the same problem.

    Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

    After manual turn off, when I turn it on again, everything works correctly:

    -If hibernation: OS will continue to last situation.

    -If start/stop: OS works normally without error or warning.

    After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

    Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

    Is there a parameter/software to check and fix my problem?

    Thank you

    Hello

    You are welcome

    On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

    You can use the following method to install an earlier version of the driver IMEI.

    Download driver IMEI on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

    Disable your wireless card (should be f12 ).

    Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

    When finished, restart the laptop.

    If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

    https://support.Microsoft.com/en-GB/KB/3073930

    Kind regards

    DP - K

  • installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online

    NEW HP computer bought in September, already updated to Windows 7 with HP upgrade kit. I installed Windows 7 for 30 days works very well. Now I want to activate. Get this error 0x800700D code... Windows 7 not WILL NOT turn ON NOW online. Also can not get a pop window to activate by phone. HP says that I must fully restore Windows Vista x 64 Home Premium AGAIN at the factory all MICROSOFT updates, and THEN... so I can reinstall Windows 7 upgrade. Why now only after 30 days Windows 7 refuses to ACTIVATE! Nothing but run between Microsoft and HP > Please HELP without having to reinstall EVERYTHING on my computer.

    Please go to http://www.microsoft.com/genuine/ and click on the button to validate Windows, and then restart your computer.

    If you were not able to validate, follow these steps:

    1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

    -Online Windows XP: double-click the executable file to run the tool.

    -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

    2. after running the tool, click the Windows tab and then click on copy to the Clipboard.

    NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

    3 start a new post in the appropriate Microsoft Genine Advantage forum and paste the results of the WGA diagnostic data in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine

    4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • MSN will not turn on it just says: upgrading, but the upgrade entirely custom install it... GETS about 58% then freezes

    MSN will not turn on it just says: upgrading, but the upgrade entirely custom install it... GETS about 58% then freezes

    Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

    Your problem has nothing to do with the Windows Update feature. Contact MSN Support. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Have VFC Z216Gx/b, which suddenly will not turn on.

    Have VFC Z216Gx/b, which suddenly will not turn on. AC is on but nothing happens when you press the button 'on '.

    Hello Bob,

    Welcome to the community of Sony.

    Try to perform all the steps here: https://us.en.kb.sony.com/app/answers/detail/a_id/35540/c/65%2C66/kw/35540

    If the problem persists, contact Sony Service support here: http://esupport.sony.com/US/perl/service.pl

    Kind regards

    Miguel

    Note: If my post answered your question, please mark it as an "accepted Solution".

  • my laptop will not turn on after a recent windows update

    Windows recently did an automatic update on my laptop and need to reboot to complete. However, it will not turn on at all now. I tried to run the install disc and used to attempt to repair my system and yet it is said that it is not repairable. Ive also tried to restore to a previous point, and yet, he won't do that. Help!

    Hello

    1. the updates are was?
    2. what exactly happens when you try to start the computer? You get the error message?
    3. What are the error messages that you receive when trying to run the system restore or Startup Repair?

    Step 1: Use the option last good Configuration see and check if you are able to boot to the desktop.

    Reference: http://windows.microsoft.com/en-US/windows-vista/Using-Last-Known-Good-Configuration

    Step 2: Check if you are able to boot into safe mode and send back the same.

  • My laptop will not turn off...

    My laptop will not turn off, even if I push the power button for 10 seconds.  The only way is to get out my battery and unplug the unit.  It started immediately after an update about two weeks ago?

    Hello

    ·         This happens even when the power chord is connected?

    ·         What is the brand and model of the laptop?

    Method 1:

    I suggest you to check the power settings on your laptop in safe mode.

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

     

    Method 2:

    I suggest you put your computer in a clean boot state, and check if the problem still persists. Click on the link below to find out how to perform the clean boot in Windows vista.

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

     

    Method 3:

    I suggest updating the latest video drivers on the manufacturer's Web site, click on the link below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/automatically-get-recommended-drivers-and-updates-for-your-hardware

    Check out these links for help:

    http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

    I f the problem persists I suggest you to contact the manufacturer of the laptop and check if it helps.

    Kind regards

  • my printer will not turn off

    Office Jet 6500, wireless, printer will not turn off.

    Disconnect the power from the back of the printer for 30 seconds.  Plug in and turn on.

  • Pavilion dv2415nr laptop. It will not stop. I downloaded the software and it will not turn off.

    I have a laptop dv2415nr Pavilion and it will not turn off.  I recently downloaded some security software and it is not stopped since the download.

    Hello

    I recommend that you make sure you have your license key for webroot. Uninstall the software and reboot. If that solves the problem, it's time to go to the Webroot support and ask their tech support that it.

    Kind regards

    ERICO

  • 7 slate screen will not turn

    The screen will not rotate from portrait to landscape when I turn it on.  Any suggestions?

    As in the other thread, slide down from the top. Click the icon which is a "lock" with arrows around it.

    Also can you please let us know when you need this rotation? It seems that it is locked during the first installation, but it is unlocked once that is finished.

Maybe you are looking for

  • several structures of event

    Experts, No harmful effect of having two event Structures, one in the main BD delivery of user interface events (button presses, menu etc.), another running into a Subvi loop, handle events of the user? My reason for doing is also blocking calls UI (

  • Flying fast command on my Canon 7 d is not in M aperture setting.

    Quick wheel on my Canon 7 d is not controlling the speed of opening or the shutter in M.  Tried to change it to operate on the main dial and manually opening and shutter work independently when I do change, but the quick control wheel will not contro

  • With the help of WRT160N with Time Capsule

    Hello! I recently put in place the router on my existing network that uses Apple's Time Capsule. I chose the option 'use this with existing router' vs 'replacement of the existing '. I have a main tower and laptop. The laptop connects fine to the new

  • How can I recover missing Windows Vista themes?

    My operating system is vista Home premium, but I realized it lacked the themes except the classic windows theme. How can I get these themes in return?

  • Remove win 8 and install win 7

    I bought a new computer I have fried the old he came with win 8 I want to format the new HDD and install win 7 I have the os install disk