With the help of WRT160N with Time Capsule

Hello!

I recently put in place the router on my existing network that uses Apple's Time Capsule. I chose the option 'use this with existing router' vs 'replacement of the existing '.

I have a main tower and laptop. The laptop connects fine to the new network on the WRT160N and find the shared main tower connected to the Time Capsule network. But the Tower cannt see the laptop shared.

I noticed that the IP address ranges are different bewteen the two networks. The Capsule is 10.0.1.X while the WRT is 192.168.1.X. This has nothing to do with why a computer can not see the other?

Thank you!

~ GST

The connection that you have enough to make his name as a cascade.

Follow this link how connect 2 routers to each other.

Tags: Linksys Routers

Similar Questions

  • With the help of Apple's Time Capsule with Lightroom

    Hi, I just bought Time Capsule thinking that all my photos may be wireless sync or searchable using Lightroom. However, when I tried to open the catalog in Lightroom on Time Capsule, it is said that he can not use network drive! WHAT A BUMMER!  I always hope that there should be another way so that I could use my Time Capsule in Lightroom and do my usual regular fabrics, manage my photos and editing wireless (if it's going to be slow, is very WELL!)

    Please advice if someone has an idea to solve this problem...

    Thank you!!

    You can have all your photos on the Time Capsule disk, but the catalog must be on another internal drive or external.

  • Cannot view or connect to the Wifi network of 5 GHz with Time Capsule from Apple 5th generation

    I have a new Apple Time Capsule 2 TB with 802.11ac network support. I have setup my base station in order to disseminate the 2.4 GHz and 5 GHz network SSID. I have 2 apple (iPad Mini and Macbook Pro) time devices can see and connect to Terminal 5 GHz network however I have also a Lenovo Vibe P1 phone (dual band wifi supported) and Samsung Galaxy Tab S compressed (dual band wifi supported) and these devices cannot see or connect to the network of 5 GHz of Base Station. I also have a Cisco router that has a dual-band support and all my devices can see and connect to the network of 5 GHz of this router.  So I wonder why I have this problem with time capsule?

    I have reset my base twice station and it is a new device purchased last month.

    Any help or suggestion is appreciated.

    Did you use the SMB compatible names for everything...?

    That is to say the alphanumeric short, without spaces and Pure...

    for example base station name... TCgen5

    name TCwifi wireless

    Have you also used the password corresponding to these requirements... but can be between 8 and 20 characters.

    If so, then you must give a different name to 5 GHz and delete the password and test... If it's not yet connect the test manually on channels 36, 44, and 149 for example if you are in the USA...

  • How can implement you not with Tim Capsule and AirPort their simulation on the iMac?

    Hello

    How can implement you not with Time Capsule and AirPort their simulation on the iMac?

    I don't know what you're asking.

    AirPort Extreme is a wireless router.

    A Time Capsule airport is an AirPort Extreme with a built-in hard drive for data storage.

    An iMac is a Mac computer.

    An iMac is not a wireless router, so he is unable to perform the functions of a wireless router.

  • Need help to set up Time Capsule to extend the current U - pay Wi - Fi.

    I am trying to extend my current Wi - Fi signal from AT + T U-Verse. I have a time capsule 1 TB and a Macbook Pro w/Retina Display. When I go in the most convenient airport Configuration it allows me to select "Extend a current network" but who is she won't let me go. The only option that it allows me to move forward with is to create a new network. I do not have the ability to plug directly into the router as I rent and do not have access to the actual router, just the Signal Wi - Fi. Please help with suggestions. I tried a factory with the time Capsule hard reset and still nothing. Thank you.

    Sorry, but the time Capsule and other Apple routers will expand only wireless network that is provided by another router from Apple.

    Another way of saying the same thing, it's that if you want to extend wireless network using an Apple product, you will need two of them... a close Uverse router/modem connected using Ethernet and set up to "create a wireless network"... and another airport located remotely to "extend a wireless network.

    Since you say that you can not access the Uverse router, that will make things very difficult.

    The only thing that peut work would be to add an AirPort Express and configure it to 'join' the Uverse wireless network. When she did this, it can then provide an Ethernet signal to the time Capsule, which in turn can be configured to provide your own private network.  In other words, the AirPort Express would act as a wire-to - Ethernet without 'bridge' to ensure the Ethernet connection that requires time Capsule.

    If you decide to try this, it would be a good idea to understand the return policy of the store on the AirPort Express before you buy. With unusual game like this, the only way you will know if it will work in your home is to try in your home.

  • process step by step new airport express from apple with time capsule base of connection (cable cat 5 150 Ft) with late 2008 macbook

    I would like a step by step process apple a new airport express with time capsule base of connection (cable cat 5 150 Ft) with late 2008 macbook.

    Connect one end of the long Ethernet cable (we assume that you have already tested the cable to make sure it works correctly) one of the three ports LAN <>- on the Time Capsule to the WAN port on the AirPort Express "O".

    We assume that the AirPort Express is new, is powered OFF... and has not been previously configured.

    Turning off the Time Capsule

    Wait a few seconds

    Put in the Time Capsule market and let it run a full minute

    Power of the AirPort Express and run a full minute. Currently, the indicator light of the Express slowly flashing orange

    On the MacBook, click the WiFi status menu icon and search for a list of the new AirPort access point

    Just below this list, click on AirPort Express

    Who will get the "Assistant" operational configuration. It will take a few seconds for the wizard to analyze the network and offer the correct setting in a display that will look like the example below, except that you can see your cameras and the name of your wireless network.

    In short simple name you want to call the AirPort Expressof type... .as OfficeExpress, for example

    Click Next

    Watch the next screen carefully to confirm that the AirPort Express is in place to extend using Ethernet, which confirms that the installation wizard recovers the wired between the Time Capsule and AirPort ExpressEthernet cable connection, so the settings correct configuration will apply.

    When you see the message Setup is complete, click done. Close the installation window, and you're done.

  • Have problems and questions with Time Capsule were addressed in any significant way. Reluctant to buy according to your comments.

    Have problems and questions with Time Capsule was dealt with in a meaningful way? Reluctant to buy according to your comments.

    Apple did not have any material changes to the time Capsule to nearly 3 years. The only change that has occurred in the last 18 months or so is a firmware update to address security issues.

  • Problems with Time Capsule

    I have problems with our time Capsule. My husband and I have Macbook Pro (from 2012). We use a Time Capsule as our backup disk but not our wireless router (we use the router provided by our internet service provider). We have configured like this for over a year and it is usually worked fine. In the last month, we had problems with backups does not happen. Currently, computer of my husband has saved in about 2 weeks, and mine has not backed up in 2 days.

    It seems that our computers lose their link with time capsule. If I go to the finder, the shared drive appears under "shared", but if I click on it to connect I get a message that says "connection failed." Airport utility shows the time Capsule but has a yellow triangle next to it that says "device not found."

    If I unplug the Time Capsule and plug it in again, it reconnects. I did this earlier this evening and was able to access the shared drive and make a return to the top. But a few hours later, this subject has disappeared again. I tried to do this same thing - unplug, get the rear connection, only to lose it again a little later. Any thoughts on what could be the problem? The Capsule was bought the same time than computers.

    I guess what surprises me is that you had no problems up to this point.

    Your computer must connect directly to the Treasury Board. Ethernet or wireless... It will break things especially in the BONES later if you do not.

    Do you have recently move you to el capo... ?? That could have triggered the problem.

    I lost the link but in apple of one document stated finally that you connect directly the computer now... because of the bad DNS in the operating system.

    If I unplug the Time Capsule and plug it in again, it reconnects. I did this earlier this evening and was able to access the shared drive and make a return to the top.

    That's why you get this nonsense. He is able to find the backup if DNS is renewed due to reset... After a few hours it is lost again.

    What operating system do you use?

    My recommendation is to put on wireless and a link to the direct of TC...

    A TC Gen4 purchased in 2012 is now at least 3 years and let me tell also your reliable stage... you are now at the stage of growing decrepitude of old people. It might work correctly for a year or two... It can suddenly die tomorrow... but more likely will fade into the sunset.

  • The update of the firmware bricked just my time capsule.

    I followed the prompt to update the firmware today and I got a 'did not finish' message type. (I don't remember what it was because I just clicked on past)

    'The airport' (which is my Time Capsule) is now Undiscoverable. I rebooted all the usual culprits (router, computers, time capsule) and did a hard reset on the time capsule itself, but still can not find airport utility "" my TC.

    Now, I'm stuck in a dystopian nightmare of the 1980s with all the promises of technology and yet none of its features.

    Help!  (I write from my phone. A device that I've recovered from the future)

    I rebooted all the usual culprits (router, computers, time capsule) and did a hard reset on the time capsule itself, but still can not find airport utility "" my TC.

    If you Hard Reset the TC, it is normal that AirPort Utility cannot find the TC... given that AirPort utility displays only devices of the airport that have already been configured.  The TC is not configured, so it's a Station of Base AirPort "nine" with the default settings.

    Start over and set up the TC to help "Assistant" Installation of Apple on your Mac or your iPhone / iPad.  After the back if you need some advice on this.

  • need help to set up Time Capsule with hub of sky

    Hi, I bought time Capsule and followed the instructions re. Connection cable internet hub in wide band directly on port WAN on TC. And yet nothing is happening outside orange flashing and message of airport utility saying it could not connect to the internet. I bought an Ethernet cable, just in case and tried to connect it to LAN to LAN, and I was able to create a 'network' but always seeing flashed. Can anyone help? Thank you!!

    El Capo can be really rotten networking.

    The skyhub is a router... I think it's okay... If you connect a computer directly into it, you should have internet?

    The TC may work very well in this configuration.

    Ethernet connector of skyhub LAN WAN TC as you did originally... correctly.

    So I highly recommend ethernet to the computer... because it helps no end. And even to pass the airport utility to use ethernet instead of wireless.

    Here (if obvious really that you would have ethernet under other Wi - Fi... don't know why I found totally by chance?)

    The configuration... make the TC must go to bridge mode...

    It is Off (bridge mode) on the network tab.

    And you need to create a wireless network with a different name to the skyhub.

    You can probably do it manually now without too many problems.

    And even without ethernet connection... Although reliable then ethernet is streets ahead wireless.

    Click on the TC icon in airport utility.

    Click on change... at the bottom right on the summary.

    Now you can fix it up. Click on the network and make sure that it says Off (bridge mode) I posted my configuration, but you do not follow that... I just allows you to see where everything is.

    Click on wireless and fix that up.

    You can even click on the base station and correct the name and the master password... so that all the names are short, without spaces and alphanumeric pure.

    NOT RECOMMENDED APPLE NAMES that are FALSE.

    If you have an ipad/iphone the iOS version of the utility is often better to get this right than the Mac version... particularly in the later version of the Mac OS.

  • Impossible to extend the existing wi - fi with time capsule airport

    Hello

    I have one Capsule of airport TB 2 hung on an Ethernet in my study (lower level).

    I already have an existing wi - fi network to ISP modem/router to my media box provided at the top level.

    In addition, I have an Extender provided by the ISP of lower level.

    I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.

    I tried several times to do so, but either it freezes up or creates its own network despite the

    mode bridge as stated in Airport utility.

    Guide gently with the method or Protocol correct to put that in place.

    Thank you

    Jay

    I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.

    It sounds like you may try to extend the network of your "main" router wireless

    The time Capsule will not be able to extend wireless network if your 'main' router is also an Apple AirPort base station.  Or... in other words if your 'main' router is not an Apple product, then the time Capsule will not be able to extend wireless network.

    So, the first question to ask here would be... What is the number of brand and model of your router "main"?

    If you intend to leave the time Capsule connected to your main router with an Ethernet connection, the Capsule must have the maximum value of "create a wireless network.  If you use the same wireless network name and password using your 'main' router, Time Capsule will provide additional wireless coverage in the area where it is located.

  • Anyone having problems with the modem from Cox and Time Capsule

    Hello

    Lately my internet falls down every day or every two days with Cox. I have reset the modem, the time capsule, the routers extreme apple, etc. shut down and restart my whole network. I called Cox every two days to refresh the modem.

    I heard that I may need to reconfigure my Time Capsule (acts as a router) to avoid this problem.

    No one knows what to do here?

    Thank you

    Please, try the following:

    Open the AirPort on your Mac utility (Finder > Applications > utilities > AirPort Utility)

    Click on the image of the time Capsule

    Click on edit in the window that appears

    Click on the Internet tab at the top of the next window

    Click the Internet Options button at the bottom of the window

    Make sure that the IPv6 configuration is set to Local link only

    Click on save, if you make changes, then click Update at the bottom right of the window

    When Cox fully implements IPv6 (they are not), you may be able to return to the automatic configuration.

  • Connecting the Apple TV with Time Capsule

    Hello

    I have a Time Capsule and I can access its content (videos, photos, docs) perfectly to the iPad/iPhone app "Filebrowser".

    However, I don't know how can I access Time Capsule Medal from Apple TV to open files remotely.

    Is there any application specially designed for Apple TV for this?

    The Apple TV is 64 GB latest generation.

    Thank you very much

    Try the VLC application. According to the guff, it should be able to find network SMB-based sources that the TC can do.

    https://9to5Mac.com/2016/01/12/VLC-for-Apple-TV-2/

  • I have an imac with time capsule - I want to save two pc laptos have the network. How to map a network drive?

    How to map a network drive, so I can save my two portable pc on my imac time capsule?
    Thank you

    Hello

    I suggest you to refer to this link and check if it helps:

    http://support.Microsoft.com/kb/308582

    It will be useful.

  • Need help to set up Time Capsule with surfboard SBG6580... wifi or extender?

    I just got my Time Capsule and trying to figure out if I should use as my wifi router, or keep my SBG6580 active and e TC allows to extend my warranty.

    Any recommendations?

    In addition, how? Online instructions do not seem to be very clear.

    Thank you!

    I will always recommend to use your Time Capsule as a router, it will be much easier to access and manipulate, unless really, you need to report more coverage.

Maybe you are looking for

  • Minitour dc5100 - installation nvidia geforce 6200 PCI - problem

    HelloI have an old HP Compaq DC5100 minitour, and I wanted to put in a graphics card instead of using the onboard gfx as windows kept alert me that I was running on system resources, and video memory.So after hunting around the net for a PCI card (PC

  • work is ' t Bluetooth

    Please help me? I use HP r007 TX with windows 8.1. I have already installed driver bluetooth (because I have seen that it is in the form of Device Manager as I gave bellow): Bluetooth: MediaTek bluetooth adapterMicrosoft bluetooth enumeratorMicrosoft

  • Kein bei his youtube

    video YouTube is fine with mozille firefox, but there is no sound.What should do?

  • HP 2840 AiO cannot print in Windows 8.1

    I just got a new Asus laptop. It came with Windows 8 and I made a clean start 8.1.  When I do a search for printers, he finds the HP 2840 on the right IP port and installs the driver.  But when I try to print a page, it appears an immediate message t

  • Simulator of corrupt

    I suspect that there is a simulator corrupted on the RIM website BlackBerry® device simulators v5.0.0.405 (ATT 9700) http://swdownloads.BlackBerry.com/downloads/contactFormPreload.do?code=060AD92489947D410D897474079C1... It downloads only 20 MB and i