Palm Pre doesn't connect to the computer
When I plug my Palm Pre in my computer it just load it, I used to get pictures on my computer, but now it will not work! Any suggestions?
You've restarted yor device? Go to Device info, reset the Options, select restart. If this does not work you can try an Erase Apps & data in the same menu. Remember this will erase all PIM data on your device and your device will have to be restored from the backup data from any source you use; Google, the profile of Palm etc.
Tags: HP Tablets
Similar Questions
-
HP Officejet 7610: HP Officejet 7610 doesn't connect to the computer
Hello.
Recently my 7610 Officejet printer has started to behave strangely. First wireless seems to be lost and I need to start using a cable connection. These days the scan function is not available for the analysis of the function of the computer is not available. The message reads - could not connect to the printer.
Today, I downloaded the latest drivers from your page and tried to reinstall the printer. Here I met the dilemma in which the printer is not found in anyway - not via a wireless connection, or via a cable. I looked in two of these threads:
However the proposals did not help as all the network settings appear to be as described. If you need information let me know.
Best, Rolands
Hello
Thank you for using the HP Forums.
Suggest that your uninstall and reinstall the software with FULL, follow these steps:
1 uninstall the software from your computerCan you try this program to uninstall Microsoft and then reinstall the software features FULL again?
https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...
2. download and save the software COMPLETE features (do not install online)The following resources will help you:
http://123.HP.com/us/en/
Keys to your printer model, operating system and download the software with FULL.
3. install the FULL feature software "saved".
Hope that helps! -
Palm TX connects to the computer via WiFi for Hotsync
I tried the network Hotsync on all my computers, XP, Vista 32 and Vista 64 (which started the whole attempt) and the device fails to connect to the computer, even if I set the IP address.
My wireless network see the Palm and I am able to access the Internet through it, but it does not connect to my computer. Any suggestions?
Here is my Wifi Hotsync help file:
WiFi HotSync with a TX
1. on your PC, locate the Manager HotSync (small HotSync icon in the lower tray of the right tool on a Winbox). Click top and check 'Network', then click again and select Setup.
2. choose the network at the top tab in the window that opens and locate your HotSync name in the list. Make sure it is checked.
3. press the button of TCP/IP and look for the IP listed for "main PC address. Write it down.
4. turn on the Wifi on your Palm and you connect to your router.
5. on your Palm, select the HotSync program and press the word "Network" over the HotSync icon in the middle of the screen. Below, enter the IP address that you noted in step 3. (Include periods!).
6. tap the HotSync icon big above the IP address and hang in there!
7. If you stand and nothing happens try a HotSync cable, then retry the HotSync Wifi. Sometimes, information is to be transferred from your PC once you check the network option. Also, don't forget to watch for any activity of firewall ask you questions about "HotSync.exe tries to access your hard drive" etc. You may need to define a rule to allow him to.
On your TX, check these settings in the drop in Hotsync:
Modem Sync: network
LanSync: LANSync
Network configuration: (Wifi should be listed as one of the networks)
WyreNut
Message edited by WyreNut on 02/11/2008 10:59 -
Hello
So I'm working on a LT desire that has been upgraded from Windows 8.1 to 10 recently and it is this message on the login screen "the device is not connected to the computer. Insert the authentication device. We can't identify what it means or what needs to be done to clear the screen. The user States that the fingerprints of impression of BIO sensor doesn't seem to work either. I looked in the Device Manager, and I see a Synaptics PS sensors (WBF) listed here and is properly installed. I even updated the driver of sensor ep on the support site of the desire, and we still see on the login screen.
Y at - it no information or help to clear this message?
We also note that the number on the keypad lock seems to be disabled during startup of windows 10 upwards. Before on windows 8.1 has been activated. Is there any setting to 10 to keep the active number lock.
The user says if 10 can be made to work well, then we can go back to 7 or 8.
Please notify.
Thank you for your time.
Seems to have been resolved in re - install the software HP Simple pass then go and reconfigure the settings. Message no longer appears on 10. User LT installed with 7 however. Best decision.
-
I just bought a copy of a license 3 reviews for QuickBooks Pro 2010. I can connect 2 computers on the home network very well. But when I try to connect computer (network) a 3rd to my machine to share the file, I get the error message. "No more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept." How can I connect my 3rd computer?
I read the article in the following link, to change the value of the EnableConnectionRateLimiting, but I do not see this key.
http://support.Microsoft.com/default.aspx/KB/969710I currently have Windows Vista Home Premium SP2, 64-bit edition.
Hello
Thanks for the response back.
The command explained in article http://support.microsoft.com/kb/314882 if applies also for Vista, we have been able to run the command.
Some possible causes for failure Remote Desktop connection are:
a. authentication level is low/disabled.
(b) the port of remote desktop can be blocked by a firewall.
c. remote connections might not be enabled on the remote computer.
d. the remote computer may be asleep or hibernating.
e. e user account doesn't have a password.
f. the remote computer may be too busy to accept more connections.To resolve all of the above causes, follow the steps listed under "I can't connect to the remote computer:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problemsI hope this helps.
Kind regards
Syed V
Answers from Microsoft supports the engineer. -
My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.
Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...
-
iPod classic connects to the computer
Hello
I have an iPod classic, since 2005.
It will charge from the grid, but when you plug it into the computer it does nothing... Does not make a noise, does not load... Nothing, only thing that happens is that when you disconnect the computer screen lights illuminates... tried all USB ports, still is not, tried 3 computers, does not work on any...
so I tried 2 more iPods, an iPod classic in 2004 and it worked fine. Tried an iPod nano of 2007 once again absolutely worked well...
really annoying me now that I want to sync music on the classic...
tried resetting the iPod, tried to run in the other mode keeping the home button and menu, press the button home-and play... None of them worked either
Jake
When you "recharge sector" (which I assume means an adapter of any), are you using the docking cable that you use with the computer? When you connect iPod from 2004 and 2007 iPod nano to the computer, you use the same USB docking cable used with the iPod in 2005?
Is the power supply adapter ("hands") accomplice of old load powering FireWire supported, not USB load? Accessories older load use FireWire instead of USB charging, which has a different voltage and uses different "pins" on the dock connector. An iPod from 2005 (probably a 5th generation "video" iPod) to connect to the computer via a USB port, but it can recharge using the USB or FireWire power.
If you can confirm that the port host USB cable to connect the iPod in 2005 is good, my guess is that the 2005 iPod dock connector will not properly connect to USB power. It can be worn or damaged. Therefore, it does not connect to the USB port on the computer. However, it always connects to FireWire, so she received the adapter (which feeds the FireWire).
Use a flashlight to look inside the iPod dock connector, to visually check for damage, corrosion, dust or debris.
-
How long it take restore iphone when connecting to the computer
How long it take restore iphone when connecting to the computer
Is based on the amount of data to restore. How long do we have?
GB
-
Hai, my ipod shuffle when it is connected with the computer, it flashes orange light. If I remove without light and music. Even I kept connected all day with my laptop for charging. But without success. Is it possible to change the battery?
If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.
Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support
If the problem reoccurs after the restoration, it's probably a battery worn. Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small. Not easy to work on. This web site has repair guides
https://www.iFixit.com/device/iPod_Shuffle
and parts are available from sources like eBay.
Apple 'serve' the shuffle, if it's the 4th gen (current type). Rather than change the battery of your device, you get a replacement unit. According to this document, out-of-warranty fees are $39
Pricing of the Service - The Apple iPod Support
NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.
The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.
-
Perform a hard reset when you are connected to the computer?
Hello
my iPod Touch G 6 seems to have momentarily buggy so I connected it to the computer, after he had died and needed a charge. He didn't start the loading of the iPod screen, so I did a hard reset while it was still connected to the computer. When he turned his back, I had to enter the password on the iPod to unlock the screen before you start synchronizing with the computer.
Desire to do harm to the iPod? I accidentally unplugged before ejecting several times, so I'm just scared.
Thank you
Jesse
You have no damage to the iPod. If you disconnect the iPod is communicating with the computer, then you can alter the iPod and a restoration will probably be necessary,
-
Photosmart IHP 6510 - can't find the USB port to connect to the computer. It is right in front of my face? I can't find a diagram online. do not have wireless capability. With the help of MacPro with Snowleopard.Thanks.
Hello
The usb port is not #22. as seen in the picture. It's in the back of the printer on the side right hiand.
Best regards
ERICO
-
Help on the printer screen says: no connection to the computer, but is connected via a USB cable. Also prints OK, but the HP solutions Center says: ink levels not currently available; iable.
Well this thread of @greenturtle should help you with Troubleshooting.
Please let me know if the Solution Center works after doing the above.
-
I lost connection on the computer like many light wireless wireless router.
I've got three Kindle and a laptop computer, more my PC connected
Original title: I lost my WiFi connection at home in light of the route for the wireless is not lit.
Hi geraldthorpe,
Thanks for posting your query in the Microsoft Community. It seems that you have no internet connection on the computer. We can get this fixed number by systematically. It can be frustrating for you. But, don't worry, we're here to help.
We start with a few questions-
(1) what is the version of Windows installed on the computer?
(2) you are able to connect to Internet via LAN cable?
(3) are other computers at home able to access Internet?
(4) do you get any error code or error message?
(5) have you made changes on the computer?
I would like more information about the issue.
Method 1-
As a general rule, if the wireless light is not on the router means that the ability of routers to transmit wireless is lost.
The router has generally, 4 types of fires.
Power - number 1
Test - number 2
Wireless - number 3
Internet - number 4
Numbered LAN are turned on only if a network cable is connected.
If the computers are connected wirelessly, all the lights except the indicator light should light up.
I wish you perform a reset and a cycle of power to the router.
Reset the router-
You must locate a set PIN size behind the router and press the reset button with a pointed object for 10 seconds. Now, release the button and wait for the lights to come back.
Note If the wireless light is back on.
Power cycle-
I wish that you unplug the router from the power outlet main and plug it back again.
Check if the problem persists.
Method 2-
I would have you look at the article-
Network convenience stores
http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters
Method 3-
I would have you look at the article-
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
Wireless and wired network problems
We know if you need help. We will be happy to help you.
Thank you.
-
Original title: My HP Officejet 4300 Series printer not print
The mistake of the printer says "no connection to the computer. The computer error says: "the printer is offline. All necessary cables are connected. What should I do?
Hello
Have you made changes on the computer before this problem?
I suggest you try this method and check the status of the issue.
Printer in Windows problems.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
You can also refer to:
Resources for the resolution of the printer in Windows XP problems.
-
My laptop with Windows XP does not connect to the camera? How can I reconnect these?
I have my camera, a Kodak M1033, connected to the computer by a usb cable. The connection is not recognized. What I can do.
Install the software from the CD provided with the camera. If no CD not supplied with the camera, you can download Easyshare for XP to Kodak support on kodak.co.uk
Maybe you are looking for
-
How to buy an old drive recovery for HP 2000-2d29WM of 2 months?
I spent all day and half the night trying to get some help with this unwanted piece of portable. I refuse to jump through the hoops, with a person to halfway around the world that I can barely understand. All I want is a way to make a recovery for
-
What is the latest version of Ubuntu on HP 530?
I have a HP 530 and I wanted to know if he could work with the latest version of Ubuntu.
-
is this common? is there something wrong with my updater? I already downloaded the latest update from MS, but continues to be the same thing. Once it is installed correctly, there they are again offered as the two same optional updates security Ms. I
-
Tips for fixing of recovery media - X120e
Three attempts at recovery media burning for my X120e plant failed on verification to 70% with an unexpected error (rc = 9). On a cursory inspection, the DL-DVD seems to have completed the burn, but I don't want to not test this theory on my system.
-
Problem with app painted super-simple paper setting
I have a simple application, where I'm putting the wallpaper. It was based on the example of Web-works on Github, but instead of using a user supplied photo I use one that is packed in the app. Simple I have a button that when clicked calls the follo