Palm profile linked to the wrong telephone number.
Mobile on my Palm profile number is related to the temporary number Sprint me issued before transferred to my exsisting number of Verizon. It doesn't seem to be a way to change this date of signature in my Palm profile on the web, and make a backup of the pre itself also not update this information. How can I fix this?
I had the same problem. I did reset my phone partail and my number is now correct on the Palm profile site.
Tags: HP Tablets
Similar Questions
-
I'm reinstalling 11 items on the new hard drive on my machine. I got reg no product of the registry on the old drive but when try to install it says it's the wrong serial number. What I am doing wrong?
Hi Phill,
Please see the links below.
Hope this will help you.
Kind regards
Hervé Khare
-
thumbnail linked to the wrong source file
I moved a large number of files outside the LR and, accordingly, have been busy to correct the links. When you try to restore a link for a particular file, I selected the wrong source file. I had the "the file you selected has a different name... still want to choose it? Without thinking, I clicked 'Yes' and now I can not understand how to fix the link. I don't want to go back to an earlier backup because, being an optimist, I kept correcting a number of additional links. Any help gratefully received. Thank you
Hi damonroad,
The only possible way here seems to rename this file outside of Lightroom so that the link would be broken again and then you can move it with the correct file.
Kind regards
Claes
-
I send the confirmation link to the wrong address. My safety is compromised?
I recently started using linux and iceweasel. I created a new e-mail account and wanted to change that I was using to synchronize iceweasel (firefox). So I removed the previes e-mail, but when I entered the new email, I send the confirmation link to a wrong email. So I'd be worried. I send back the confirmation link and entered a new password. But I would like to know, what happens when you make a mistake like that.
Thank you
Most of the users will not use the links, but there are others who...
If you quickly changed and checked the password and email
the correct data, you should be fine. -
The adobe Web site gives me the wrong serial number
I'm trying to re instal cs - 5 on my macbook pro and I can't seem to locate the correct serial number. I flamed in the adobe Web site and found a serial number in my account information. It is not good and I don't know how to find the right one. I'd appreciate any help ASAP! Thank you
Error "serial number is not valid for this product". Creative Suite
-
SQL: How to select the first telephone number for the Service to find?
Hi, can someone help me difficulty this query?
The problem is - ID is left with no phone number, a phone number and phone number. My requirement is to choose only first phone numbers and NULL values if a party who has more than one phone number. The query below is correctly picking of NULL values and unique phone numbers but also by selecting all the phone numbers for the id of group 13909 which has 3 phone numbers
It involves choosing the first phone number 416-890-0089 and limited to 416-960-8686, 647-456-3040
How to select only the first group id for the parties who have more than one phone number
Thanks in advance!
Select distinct p.party_id,
p.family_name,
p.given_name,
p.Status,
p.type,
above. Value,
PR. Role,
ad.unit_number,
ad.unit_identifier,
ad.street_number,
ad.street_number_suffix,
ad.street_name,
ad.street_type,
ad.street_direction,
ad. City,
ad.province_id,
ad.Postal_Code,
ad. Country_ID,
ad.postal_box_number,
ad.station_type,
ad.station_identifier,
ad.address_line_1,
ad.address_line_2,
ad.address_line_3,
ad.rural_route_identifier,
ad.rural_route_type,
ad. Status,
ad. ADDRESS_ID,
ad.attention
part p, ad address this contact_information, party_contact pc, pd, pr SR1CUST1.party_role party_address
Where
P.party_id = PD. Party_id
AND AD.address_id = PD.address_id
and p.party_id = pr.party_id
And (CI. Contact_Mode 't ='
Or CI. Contact_Mode is null)
AND P.party_id = PC. Party_id (+)
And PC. CONTACT_INFO_ID = this .contact_info_id (+)
AND AD.address_type = 'P '.
and P.type = 'B'
and pr.role = 'C '.
and p.family_name like '% Lew '.
and as p.given_name ' J %
Order by p.party_id ASC
Response
1478 null
1479 null
1577 null
1712 null
1822 null
6346-647-345-7384
6347 416-890-9384
6348 519-897-0089
6832 416-930-1265
8733 647-976-8923
13909 416-890-0089
13909 416-960-8686
13909 647-456-3040You can simply use one group from all other columns that the phone number and then choose the min (phone_number):
select col1, col2, ... coln, min(phone_number_column) from yourtables where yourconditions group by col1, col2, ... coln;
-
Hello
I discovered what seems like a small bug for me in CS6 (compared to PS CS3 and CS4).
I would be inteterested if others could confirm this (or explain it to me)
When using Convert to profile, AdobeRGB-> bugs 'conversion' AdobeRGB in preview. Since there is no actual conversion, the preview is the same but on the contrary shows a strong change contrast.
This is my workflow:
-Working color space: sRGB (I use Europe General Purpose 3 preset)
-Open a document in AdobeRGB (kept original profile, no prior conversion to sRGB), no trial activated
-I run "Convert to profile", a Source RGB Adobe's profile. Now, if I go to the Destination profile: AdobeRGB (which is of course "useless"), I see a color change in the preview image. If I run the conversion, the image returns to normal, so it only works on the preview. Note that conversion to other profiles as sRGB does not give a wrong look.
"Convert to profile" settings are engine: Adobe (ACE), intent: Relative Colorimetry, Dither and use black point compensation. Changing these settings is not to fix the bug I'm mentioning.This Visual bug only affects AdobeRGB-> conversion AdobeRGB (even once, Yes, I know, it's useless)
I tested the issue on two separate machines (Windows 7, PS CS6 x 64)
Do you feel the same questions?
Thank you!
JS
This has been reported before, and can be easily reproduced. I never heard that it's any kind of feature - I'm with you: Bug.
I suspect because it is a problem of read-only and does not affect the image quality and it's absurd kind of operation in any case, Adobe has assigned a lower priority level than pretty much everything else.
But if it were my software I'd be certainly embarrassed that she did this.
-Christmas
-
I have several accounts that I use in thunderbird. Everything works fine and I have no problem at all. But when I am on the web and click on a "mailto:" link on a Web site, Thunderbird always opens the new e-mail window using the first account in the "stack". I never use this account to send mail... I want to use another account but cannot figure out how twell TB that is.
At the top e-mail account is the default e-mail account.
Tools > accounts settings
or
Right-click on the name of the e-mail account, and then select "settings".Select the desired default mail account name.
Click on "Account Actions" to get the drop down options
Click on "Set as default"
Click OK to save the changes. -
Wrong telephone number.
When I'm in the keychain, the unit will ask you to enter a PIN. I remember that PIN, although I want to change.
Once apple keychain will send a your mobile phone authentication code. I have a different number, it changed the site of apple ID.
But the device is sending to my old phone number. What can I do, where to go to change it. Keychain apparently has its own contact information to me.
So, the 2 main questions will be
How to change my PIN I should use for my keychain?
Where to change my mobile phone number ring uses?
System Preferences/iCloud/Keychain/Options should allow you to change the phone number.
-
System of Information of Acer software to access the wrong serial number
I have an Aspire V5 - 471P. I installed a hard drive created on another identical machine, after the failure of the old hard drive.
How can I get SystemInformation.exe to display the serial number of the BIOS and not what I assume must come from its own data file from Acer? There seems to be no option to refresh its data or change where it comes from (data file? Register?) I tried to remove and reinstall but it stil shows bad serial number and the SNID.
Software of the identity card of Acer and SIW shows the right series and SNID numbers, agree with the sticker on the underside of the laptop, but AcerSystemInformation.exe still shows the details of the other laptop.
Check this file:
C:------E M O-R e f D t one. t m p
(this is a hidden folder)
Open with Notepad
-
PhoneGap video on Adobe TV links to the wrong content
I tried to get an overview of the API file on PhoneGap/Cordova and stumbled upon this video, unfortunately the link goes to a video for Adobe Muse. I tried to find a suitable place to post the link, but to no avail. Anyone know how I can access this video?
Access file systems on mobile devices with the file API | Adobe PhoneGap Build tutorials
Hi, Padraig, I'll look into why the link doesn't work. I think it is the video here that _should_ be bound for this tutorial:
-
By default links to the wrong folder
Why does when I go to create a link to an image placed in the palette links that he always directs me to the correct folder (not one image lives, but elsewhere). I think it's me in the last folder that I have navigated. thoughts?
You now have a feedback where will reissue, the last folder you used to post a link or folder where the original link. It's in the preferences.
-
CC bridge links to the wrong version of Photoshop
When double click on an image that bridge CC tries to open Photoshop CS4 (which is not installed even more) instead of open Photoshop CC. I can't find anywhere in the Preferences dialog box, or any where else, how to say bridge where to look. Any ideas?
Hi marcelongoyyasin,
You can try to remove all versions of Photoshop from your system and delete all files associated with it.
Once done, remove the bridge CC as well.
Restart the computer.
Reinstall the Photoshop CC 2015 and then fill CC.
This should take care of the problem.
Let us know if it helps.
Kind regards
~ Mohit
-
HP Support Assistant - telephone number incorrect for the Germany
Let's not the phone number indicated in HP Support Assistant for the Germany. Under the button 'Contact support' location Germany selected, 'call HP"indicates phone number 01805 65 21 80. This phone number no longer in service.
The right phone numbers are on http://www8.hp.com/de/de/contact-hp/phone-assist.html and in my case, it would be + 49 69 2999 3434 for support for portable computers.
I used the Feedback button in the HP Support Assistant to report the problem on the wrong telephone number.
HP Support Assistant version: 7.0.39.15
Configuration file version: 7.0.2395.1100
Mike
The about button / check for the latest version on HP Support Assistant version: 7.0.39.15 (running on the laptop of HP ENVY 15 TS) came back with the result that the latest version is already installed. I noticed that on the page of the driver for my laptop, this 7.3.35.20 Version sp62291.exe is available. Once I had downloaded and installed this new version, support for the Germany phone numbers appear correctly.
Mike -
How can I reset 'default' browser / navigator / telephone number selector?
I discovered that the selection of a default option apparently cannot be changed after the selection. I found this to be true in the quick contact applet - I checked the area and then quickly selected the wrong telephone number. I had to remove that number by editing the contact.
Similarly, I was exploring "Pocket Agent" by State Farm Insurance. I chose to find a hotel and the option of maps and Verizon Navigator came with the default selection box. I checked the place and selected wrong Navigator - I don't have a subscription to it and it won't work with the applet without subscription. I spoke with State Farm - they say that it is a default operating system used phone, not a fault of the program. I talked to Verizon tech support - they thought it was a fault of the preserved applet. They suggested resetting the data and cache (Nothing in it) of the application. I made these and nothing has changed. I even uninstalled, rebooted and reinstalled - it retains the default value to use an unusable applet. I looked for Verizon Navigator in the list of applications, so I could explore these parameters, but it is not - which means that it cannot be uninstalled, either, I guess.
How can I change this? I think that there is a 'register' somewhere that contains these default settings.
Sorry I forgot to answer your question by default number. was busy reading the rest of your son
get into contact and you will see the number you have chosen has a small check next to him. If you want to switch to another number, then press the new number you want to switch to and press "make default number.
Maybe you are looking for
-
Driver missing in Windows 7 RTM TX2000 coprocessor
I installed Windows 7 RTM on my HP TX2000 and everything went well, except for a missing 'coprocessor' driver. I did a little research and found several posts that seem to indicate that I need to install one of the Vista 64 drivers manually. I downlo
-
Do I need a converter for my Macbook when traveling in Ireland or just a form of adaptation?
Do I need a converter for my Macbook when traveling in Ireland or just a form of adaptation?
-
Re: Satellite L350 - new installation or update Win7
Hello a part of the hard drive is reserved for Windows re. (oem protect)Else delete all partitions with partition magic?After a windows upgrade I no longer need the win vista recovery?Can I do a new backup with windows 7 Is everything correct what I
-
How can I put an upper limit and lower limit on the chart inside a while loop?
Need some help here. I'm working on a project, I collected data thru OR myDAQ, draw a waveform graph, is possible to add a limit upper and lower the table on waveform? I tried ways but can't seem to work. Any help is appreciated thank you.
-
HP Office Jet Pro 8610: Document Feeder problems
Today when you try to scan from Adobe Acrobat, the charger does not work. It does not work when you scan directly from the printer control panel. I ran HPSSdr, but that did not fix the problem. The connection to the priter is wi - fi.