Pane Windows will not start! Help please!

Similar Questions

• I accidentally put my system as boot partition and my windows partition not marked as boot! Windows will not start! ):

  Hello

  The other day, I have been stupid, play with my windows partitions, I tried to dual-boot android 4.0 with windows, of course, as a study (this version of android has been mainly Linux). A test installation somehow fault, I put my Starter instead of windows system partition! Now windows will not start, it stays on a black screen with a sign less this sort of thing flashes in the corner.
  So I jumped in my disk windows ultimate 7, and it saysBOOTMGR IS MISSING Ctrl + Alt + Del to restart"" and if I try to install Ubuntu via live disc or USB does not start or the other, it displays the same thing.
  Can you please help me solve this problem!
  Nice day!

  After having the BIOS change, restart you your computer with the repair disc in the drive?  If so, what happened?

• Why my TestStand deployment installation appear under my Windows will not start menu of my target machine?

  Why my TestStand deployment installation appear under my Windows will not start menu of my target machine?

  I managed to install the deployments of work to the target machines. However, I expected to see the classified facility "My TestStand system" in my Start menu, but it is not. Am I misunderstanding something here?

  Also, if I do another target second deployment to the station as "My TestStand system B", all LabVIEW files in my previous installation for "My system TestStand" disappear from the directory (c:\Program Files\My TestStand system) target.

  I use TestStand Professional 4.2.1 on Windows XP and LabVIEW 2009 development station.

  Thank you Paul,.

  That solved my second problem and inspired me to look deeper for the response to my first problem. The answer lies in the tab 'distributed file","Installer properties' box 'create a program item:

  

  Wouldn't be nice if it is automatically checked by default for main sequence files? Wouldn't also nice if "Upgrade Code" was regenerated automatically by default whenever we have saved the file *.tsd under another name?

  Thanks again,

  Eugene

• Windows will not start since the update :( Help, please

  Windows could not start. a recent hardware or software change might be the problem

  file\windows\system32\config\system
  status: 0xc00000e9

  When I try to start the system restart that nothing happens

  When I try to restore the computer to factory settings it says that the necessary files are not there.

  My computer was working fine until I installed an automatic update from microsoft. Help, please

  For any problem with the recovery of software/process to factory settings, you will need to contact the manufacturer of your computer.
  This isn't their recovery process, Microsoft.

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite P20-761: Windows will not start - it loads agp.sys then freezes

  When I pass my laptop it starts with the Toshiba logo as if commissioning, but then the screen goes black with the following message:

  We apologize for the inconvenience, but windows did not start successfully. A recent hardware of software change might have caused this... etc etc.

  Then I have a list of options to choose from:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last good known Configuration
  Start windows normally

  If I have the choice between the options of safe mode the screen goes through a list of files ending with: multi (0) disk (0) partition (1) \WINDOWS\System32\DRIVE.sys, then freezes.

  If I have the choice between the last two options simply, the screen goes black and nothing happens.

  Of I'm desperate is not to lose all the data that I have accumulated on the laptop. Stupid me not a not bother with backups.

  Discs only can I find supplied with the laptop are 'tools and utilities' and 'product recovery dvd - rom '. Seeing that I am not a technical interest, I'm afraid to try just in case I lose all my most important files.

  Help, please! Answers must be plain English as like I said I'm not really technical. Thank you. I cross my fingers.

  Sounds like something wrong with the graphics card or with the graphics driver.

  I think that you have no other choice than to use the Toshiba Recovery CD and attempt to reinstall the OS. I hope that the graphics card doesn t malfunctions.

  It's very sad, because in this case, you will lose the data on the HARD drive.
  Optionally, you can remove the HARD drive and then to connect to little via the USB port on the other computer, then you can make a backup of your data.

• I have an eMachine EL1200 with Windows XP Home Edition. Windows will not start

  I went to start my computer yesterday morning and Windows wouldn't start up.  He continues to go to a black screen saying that Windows has not started up. It gives me options to try:

  1. safe Mode

  2 safe Mode w / network

  3 safe Mode w / command prompt

  4. last know good configuration

  5 start normally

  I tried all the and none start Windows.  Please let me know how I can fix it.

  Hi DavidMitchell,
  I would first remove all external devices from the computer and try to start again. This means that any player mp3, external drives, USB storage devices, etc.

  If this does not work and you're still stuck on these 5 options you listed above, then it might be time to use the Recovery Console.

  Please see the following thread:

  This is an article on what exactly is the Recovery Console and how to use it properly.

  http://support.Microsoft.com/kb/307654

  I hope this helps. Just reply to the results.

• Windows will not start because the following file is missing or corrupt < root windows > < hal.dll windows >

  When I turn on my PC a black screen appears for about 5 minutes, then the following message: Windows could not start because the following file is missing or corrupt I can not any more access to the computer and having to turn it off.

  Hello

  I suggest that you follow the steps described in the links below and check if they help to resolve the issue.

  Link 1:

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  http://support.Microsoft.com/kb/330184

  Link 2:

  IF the steps in the link 1 does not work, check the steps in the link below.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

• Windows will not start completely freezes...

  Hey!
  I had a problem that my laptop HP 7 windows does not start more... It takes time to get the Palm from windows screen and then it freezes when it gets to the office. Anyone have any idea how to solve this problem? I was thinking about the HP system recovery, but I don't know if that clears all my data or resets just windows. Don't want to lose all my data if its possible somehow. (I have the system on different hard drive recovery not on disks by the way).

  Hello

  Hard disk 1 (303) fast means hard himself is a failure and change Windows is not going to help.  Replacing the hard drive in a laptop is surprisingly easy.  Although the machine in the following link is different from yours, the process is almost identical.

  Replacement hard drive HP

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive.

  If you do not have your restore CD, try the link below to see if you can order a replacement.

  http://support.HP.com/us-en/document/c00810334

  A possible way to try to recover your files from a disk non-boot is to follow the process described in the link below.  The CD of the Ubuntu operating system you create can launched from the CD alone (IE it doesn't have to be installed on the hard drive) and I've often found to successfully extract data even a hard failure.  When you created the CD, follow the instructions and see if you can save your existing files.

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windo...

  Hope this works for you.

  Best wishes

  DP - K

• Satellite P10 554 will not start! Please help ASAP!

  Hello, please someone help as soon as possible.

  I got it for a few years now. A keyboard replaced Germnan to English.

  Used it three days ago and was very good. It shows no signs of something not ussual.

  This mornign however, I pressed the "power" button and not started. I tried to connect the battery, no indicator light came.

  I'm lost-don't know what to do.

  Please help someone?

  Thanks in advance

  Hello Morta

  If the unit is connected to the power supply and if there is no response after pressing power button must be some hardware malfunction. Press the power button and hold down for a few seconds. I put t know how old is your device but it is possible that the warranty is still valid. Please contact the customer Service of your country partner and let check the device. The warranty will cover the costs.

• Pavilion dx6500: Windows will not start

  I have laptop computer dx6500 computer laptop hp Pavilion Windows 7 Ultimate 64 bit running. I turn it on a day when he gave me a message that operating system is missing or damaged. Because I had valuable documents and other important stuffs on this subject, I decided to install a second operating system on the second partition and booted the laptop. I could get my fabrics that stood on the second partition and then I realized that the operating system has become two phone cuz always invite me to choose which operating system to boot from. Because I did not like that, I went to remove the operating system which was not established as the default operating system. The next day, I turn on the laptop to see a white screen with the message "press F1 to RESUME. or F10 Setup I pressed the F1 key and realized that it wasn't working, so I pressed the F10 key too but did not work too. So I decide to press any of the keyboard but realized that the keyboard did not. I decided to reformat then I inserted the windows installation CD in the drive so that he could boot from CD cos I put the CD drive as the first in the boot order but any time, I turned off the computer and turn it on, it goes back to same screen and would not even boot. Someone please help me!

  Hi @Dontworry,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv6500 CTO Entertainment Notebook and questions with press < F1 > to < F2 > for the installer to start. I recommend to restore the default BIOS settings. You could restore the BIOS withthis document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  If it's not a help to any first start Notepad hold b and Windows key. Just keep holding it. Once your nothing that happens, restart the laptop. This should restore the last configuration of the BIOS.
  
  Please let me know how it goes.
  
  Thank you.

• HP Pavilion e020us 17: 10 Windows will not start

  I worked on a portable computer that no longer starts.   If I boot from the hard disk in the recovery partition I can't start there on the Windows partition.  I have a choice of Windows 10 of Volume 4, Windows 10 of Volume 4 (Yes it is listed twice) and the Windows recovery environment.  Picking either 10 Windows starts the computer in a reboot loop that can only be stopped by pressing ESC and returning to the recovery environment.

  Boot from CD and try to repair the operating system does nothing - he says that he cannot repair the computer and goes to the recovery environment.

  Auto repair, recovery Image system and System Restore does not work.

  Command prompt shows everything on the C drive is still in place.  CHKDSK shows that all is well with the drive.  But I can't boot from the drive.

  I have not tried to reset the computer only because I'm going to do as a last resort.

  Any suggestions on what to do next?

  Hi @tedly2,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that the computer gets stuck in a perpetual loop and does not start. I'll be happy to help you with this.

  A remarkable work was done by train to solve the problem. Hats off to you on this point. I am really impressed with your troubleshooting skills and levels of technical expertise, and it's always a privilege to work with a client of enthusiasts like you.

  First, isolate the problem to be hardware or software related by running diagnostics. Please try a hard reset first. Steps to do:

  • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back.

  Diagnostics of material:

  • The main menu of hardware for the HP (UEFI) PC Diagnostics is displayed.
  • Hold the power button for at least five seconds to turn off the computer.
  • Turn on the computer and immediately press the F2 key repeatedly, once every second about.

  Link to run the hardware diagnostics: http://support.hp.com/in-en/document/c03467259

  There is a video partner who shows how it's done. "Please make the step" test using material for the HP (UEFI) PC Diagnostics "from this link. Run full Diagnostics.

  Where it is established that the hardware is fully functional, please try to recover a system from this link: http://support.hp.com/in-en/document/c04758961#AbT4 , choose the right option that best describes your situation. If nothing helps, please order a set of recovery here online media: http://hp.com/drivers

  I hope this helps! Please let me know how it goes. If it helps, please mark this message as "'Accept as Solution". " If you need help, let me know and I will gladly make all that I can to help. If you want to say 'Thank you' for my efforts help, click the ' Thumbs Up ' to give me a Kudos. I really hope that the problem is solved without hassle and things work fine.

  Take care and have a fabulous week ahead.

• Envy 17 j120na: 10 Windows will not start because of the driver installation failed

  History:

  I have a computer laptop j120na Envy 17 that came with windows 8.1.

  I did the free upgride for windows 10 the 18th of this month with success, but because I was not able to decrease or increase the brightness of my computer, or put it to sleep, I realized that I still had to download/update drivers. First I updated the driver GeForce since my SWsetup folder but for the other, I searched online for her, then I saw the driver download progress bar but no progress has been made. I closed the dialog close and there you go, laptop does not start, I just saw a spark between the mouse pointer and the circular blue contraption. Sometimes he shows me a BSOD with lock core auto boost with irql higher acquisition.

  Question:

  Is this a problem with the driver installation? And if so, how do I return it?

  P.s: System Restore is not an option, I restore point.

  Hi there @Aj1baba,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and assistance of HP and the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that you are receiving an error message that says "acquisition of lock core auto boost with irql high ' on your HP ENVY 17-j120na Notebook PC.

  The question could be deemed to occur by downloading the update. It is difficult to say at this stage. As to return to it, your best bet would have been the restoration of the system, but you mentioned only that a system restore does not work because you do not have restore points.

  Have you tried to go into Safe Mode?

  You have media or recovery disk?

  Have you tried to do a Reset BIOS?

  Have you tried perform a hard reset?

  You have beep codes or flashing LEDs?

  Please ensure that all Bluetooth device that you use with the laptop is disabled (including mobile phone).

  Please note: delete all USB/Bluetooth devices. Disconnect all devices of non-essential, as these can cause some problems.

  You can update all your drivers by going to the Web site the driver HP or by using the HP Support Assistant. If you enter Safe Mode, I suggest trying to erase the driver that you have downloaded your downloads (or the folder that you saved it in), so I suggest to make updates using updates of Windows or HP Support Assistant for now.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Have a great day!

• Laptop with Windows XP - windows will not start! __

  KIM when I start my computer, the advanced screen comes up with "run windows normally" run in safe mode, etc.  I tried this, but it does not work.  The windows logo comes with the banner running beneath the logo as it tries to start, but never does.  Any help please?

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank:

  My system worked well until ___.

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop of just not being able to go beyond the screen boot options.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure

  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start pressing the F8 key with more urgency (earlier and more frequently) until you see disable automatic restarts on system failure, and then select it.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.
  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Bootcamp partition Windows will not start since WinUpdate

  I'm working on a MacMini (mid 2011) on which a bootcamp partition has been installed. I had to work on windows update etc...

  So I did update from our wsus server, and then restart Windows, windows no longer starts. There was a line of white underscore flashing on a black screen.

  I tried to see if the Mac partition (10.7) was able to start. It has been altered too, but I was able to reinstall it.

  __

  on windows, I followed these instructions: https://discussions.apple.com/thread/4936761?tstart=0

  To do this, I created a USB bootable key WIN10 (regardless of the Version of the OS in this case), I started on it to access the repair menu. Here, I opened the CMD and had results of the thesis:

  
  x:\sources>cd c:\ 
  
  x:\sources>Bootrec.exe /Fixmbr 
  
  Operation succeed 
  
  x:\sources>Bootrec.exe /FixBoot 
  
  Operation succeed 
  
  x:\sources>Bootrec.exe /RebuildBcd 
  
  Number of windows installation identified : 1 Add the installation to boot list ? : O 
  
  Asked System Device not found. 
  

  I assumed it was due to drivers for windows compatibility. (something like record of $ $WinPEDriver), but no idea how to put them on my bootcamp partition, previously never worked with bootcamp.

  I should also mention, I tried a classic Windows repair, he told me that my windows partition has been locked. I assumed it was a problem of version of bootcamp. I've updated everything on my mac partition, but he found no update for bootcamp. Right now I'm preparing a bootable usb key with both 'iso' and 'windows compatibility modules' activated with bootcamp assistant.

  I don't know when it happens, but now, when I try to boot on my bootcamp partition, there are only blackscreen (not slider more). But also, my screen flashes as if he finally gets the signal just before the black screen.

  I need your help for:

  -Fixed problem starting Windows partition, OR...

  -Give me a way to get the activation key for the license of the installed windows (without starting it (if it exists)), so I can reinstall it correctly.

  Thanks for the kind help and forgive my bad English.

  Please after the release of the following OSX Terminal commands.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  What version of Windows?

  DiskPart should be used to clear the readonly attributes.

  Bootrec.exe must be used that on C:, otherwise it is written to X:. CD C:\ should be replaced with C: only if you are on the C: drive.

  If you run Diskpart, please after the release of

  list disk

  partition from the list

  the list volume

• Windows will not start since the attempt to install the camera software?

  Hello, I tried to install the camera software, when I did it said my computer to shut off and re satart to complete the installation, when I did a blue screen came up saying that windows had been shut down to protect my computer (not this one). He says to re start computer I did who bought the safe mode/start windows normally screen etc, but nothing's going to restart windows, it starts at, then returns to the blue screen again. Can anyone help please?  Thank you. Trevor

  Hello

  ·         What software have you tried to install on the system and what is the name of the program and where you installed it go?

  ·         What is the exact error message that you meet in the blue screen?

  ·         You're able to boot in safe mode?

  Method 1:

  Step 1:

  I suggest you try and boot into safe mode. Follow the steps mentioned below.

  a. restart and keep tapping F8 until you reach the start menu.

  b. Select safe mode and press ENTER.

  Step 2:

  Do a restore system, safe mode and check. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084/en-us

  Method 2:

  I suggest you to try and initiate the last known good configuration. Follow the steps mentioned below.

  a. restart and keep tapping F8 until you reach the start menu.

  b. Select last known good configuration and press ENTER.

   

  Method 3:

  I suggest to do a restore of the system from the recovery console and check if you are able to boot to the desktop without any problem. Follow the steps mentioned in the article below.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545