paper mismatch

Similar Questions

• hp7500a paper mismatch error message when you use eprint

  I have a printer large format of HP7500A

  When I send pictures from my phone to the printer via x, I get a printer "Paper Mismatch" error message.

  Paper size or type.

  Yet when I check the settings it is on A4, which is the book that I use.

  Could someone tell me what I need to do to fix this problem?

  Hello Nashy58,

  The question is in works for printing with the PhotoSmart printer line.  When you send a photo printing via ePrint, ePrint will automatically print to the photo tray.  At the moment there is no way to change this.  To print a photo to paper ordinary via ePrint, you put the paper in the photo tray, I would not recommend it because it was not designed to handle this type of paper.

• OfficeJet Pro 8500 has more: format of paper PAPER MISMATCH or type is incorrect message

  When I try to print a regular 8 1/2 x 11 paper, I get an error message that says "paper mismatch: paper size or type is incorrect." What happened recently power, and sometimes I couldn't the printer to print if I power off (reset) completely and/or rebooted my laptop, or if I deleted the printer in the preferences system and then he readded.  But now, not even these solutions are effective and I get the error message.  I followed the following steps: http://support.hp.com/us-en/document/c01824353 and had no luck.

  If I could just replace the message, it would be a cure, because everything that I never print is 8 1/2 x 11.

  I am not sure, but it may have started to happen after I upgraded my laptop 10.9.5.

  Anyway, if I could dare ask you to respond very clearly and in a sort of step by step of passage. I'm a Baby Boomer, so it is not intuitive for me, thank you in advance to give me very simple instructions!

  Hello

  Please try the procedure on the fron printer below Panel.

  1. Press SETUP, then
  2. Touch TOOLS, then
  3. Touch RESTORE to the FACTORY DEFAULT

  Now try printing.

• M2Q28A: what I'll do my printer Deskjet GT 5820 always having paper mismatch error

  my printer is brand new, but when I started to print always says paper mismatch, im trying to find how to solve this problem. I tried to change the default paper size detected automatically by the printer via the built-in webserver (EWS) and I have cheked the default paper size but does not please help me how to solve this problem.

  Hey @S3dnnie,

  Thanks for the information!

  Let's try the following steps:
  
  • Load legal-size paper (1) in the paper from your printer tray

  • (2) click the Start button

  • (3) open devices and printers

  • (4) right click on your Deskjet

  • (5) left click on Printing Preferences

  • (6) click on the paper/quality tab

  • (7), select Advanced Options at the bottom right

  • (8) according to the paper size drop-down select legal

  • (9) click on OK

  • (10) select apply and OK in the print options box

  Now that the pilot has been set to Legal, printing test.

  Please click "accept as Solution" If you feel my post solved your problem, it will help others find the solution. You can also click the "Kudos, Thumbs Up" on the right to say 'thank you' to help!

  I would like to know how it goes!

• HPePrint gives paper mismatch error when I try to print from my android phone

  I have 5 x 7 paper in Photosmart 7520 printer and when I try to send a photo from my android phone to the printer, I get a paper mismatch error. It will print 4 x 6? I can't change a setting somewhere?

  OK, go to the ePrint app, select what you want to print once you have print preview, select settings. Then, select paper size.

  Let me know if you have any problems finding this option.

• Paper mismatch error message

  When you attempt to print a photo, I get a paper mismatch error.  Uses a macbook pro 10.6.  This is a new printer Photosmart C309.  Loading paper photo 4 x 6 supplied with the printer... right side up... pushed forward and plastic cursor rolls over to the right... I try to print from iPhoto... selected photo... Press on print and selected photo 4 x 6-10 x 15... When I hit the "print"... key photo paper is slipped into the printer and then a few seconds later, I get paper mismatch error. Have printed docs full-size without problem.  Any help to be more appreciated... I did go to the HP website and download the latest drivers for this printer and osx 10.6.  Have checked all the settings in the system prefs under print and scan and see nothing wrong

  Interesting... I was not choosing photo but that did not work... I selected auto and press on print and a message came up on the viewer of the printer that says something to the service that the automatic detection of paper was selected and went ahead and printed the photo... I tried to get the message coming up again in order to be correct in what he says, but it won't come back again.  Thank you very much for your help... printed 4 photos and they are all 'professional' looking... I'll take advantage of this printer.  Once again, thank you!

• Error printing paper mismatch

  When I try to print, the paper is pulled part of the way into the printer, then I get an error message on the printer screen that says "paper mismatch" and printing stops.  When I cancel the job, the printer pushes the paper through, and when it comes out, the bottom of the sheet (the last part out) is wrinkled.  Sometimes the paper will not push throughout and I take it out of the printer.  I noticed in this case, when the printer is stopped, the lower edge of the paper has a wave, i.e. it is not "flat", and the top end of the paper is not aligned right into the printer, but tilted.  Can anyone help?

  Looks like a hardware problem (maybe some paper stuck in the printer).  Seek assistance from the manufacturer of your printer.

  Often, these guys have useful information--> http://www.fixyourownprinter.com/

  In both cases, you will need to identify the make and model of your printer.

• When I try to print a CD Stomper labels page, I still get a paper mismatch error

  Whenever I try to print a label on the CD Stomper page, I get paper mismatch error but I'm able to resolve the issue each time, but the procedure does not solve the problem permanently; only one or two times, but if it's a new day the error again I have to repeat the procedure to appoint the problem and I am trying to print and it will display once more.  I need a permanent solution to this problem.  I use the HP Photosmart C5180 All-in-One.

  The reason why he does not remember the settings that you make for your printer is because these settings are stored in the software you use, the only way to change them permanently is to set them as the default value in the program that you are using itself. So, you may have to contact your CD Stomper for how to do this.

  Let me know if this helped!

• 8600 paper mismatch error

  I select envelopes DL size MSWord 'Direct mail' (& central position in the tape) and I load envelopes DL size cassette printer in a central position. But when I hit print, I get a paper mismatch error.

  Hello

  Please visit the link below to fix the problem.

  http://support.HP.com/us-en/document/c01824353

• Envy 100 D410 printer paper mismatch error

  My Envy 100 gives "Paper mismatch" error when I try to print using ePrint, when I try to print a status report and any other time, I try to print unless in the Windows driver I put quality in the 'project '.

  I tried to clean everything, but no luck, it seemed to just start doing this a few months ago.

  Any ideas?

  From previous posts, I see that this printer is having a problem with the hardware with the paper sensors.  Setting the printer in project mode overrides the paper sensors and works around this problem.  However, it seems that web services are unable to pass even with the project defined mode.  So, I guess that this printer is out of warranty is an Envy 100.  I would say that at this stage, the best idea with this printer is to print in draft mode of the computer and try copies in fast mode.

  If you want to use web services, then this product of replacement would be needed to take advantage of this feature.  Good luck.

• Photosmart 6525: paper mismatch error photosmart 6525

  I get a "Paper mismatch" error when you try to print from Word on paper 8 1/2 x 11 holiday.  I can print on plain 8 1/2 x 11 paper without problem, but when I load the holiday paper and try printing the same thing I get "Paper Mismatch", and the only option on the printer screen is "press OK to cancel Job.  I don't want to cancel the job.  I want to print!  Why can it print fine on paper, but not on the holiday paper which is EXACTLY the same size!  I don't understand.  I have tried everything I can find on the HP site, but nothing solves this problem.

  I found a solution on my own.  The problem seems to have occurred because the book of holiday has a metallic design around the edge, and the reflection of this metal was fool the printer into thinking it was something other than paper.  What I did to solve the problem, is to turn the paper so that the printer was looking at the back of the paper first, rather than the front.  I then change the setting in Word to print forward instead of back and forth.  The end result is what I wanted in the first place, but as now the printer has been to see the back of the paper first and the back of the paper is this metal edge, he saw this metal - all the saw of the printer was paper, so it worked.

• OfficeJet 6600: Paper mismatch error

  Hello
  Will be a mistake of the incompatibility of weird paper on this new computer. Initially, printed but on a slight angle, now it does print none with regular paper mismatch error. The book is on letter and page of the letter, is not sure what is happening.

  Seen on a post of support for the same problems with a 6500 a download a firmware update - but once I try to install, it is said that the program is completely updated... which does not help. I clicked to repair the program in the region to add / remove programs, but no change. Would not have to uninstall and reinstall the printer, but probably it is the best next step for me for me.

  But... I saw someone here say they have been PM'ing some people with a similar problem, some kind of reset the option for this obviously common problem... don't know why reset options aren't just posted on the forum as well. Also tried is installing the latest version of the HP Support Assistant... but it just sits there, appearing there download but nothing happens and it never seems to fill.

  I hope we can understand this... endless with the 6600 lately.

  Thanks in advance!

  Grandson did a uninstall and reinstall, we did things with the printer. It reprinted tortuous though, even after all the updates, firmware and drivers have been updated the link to the driver.

  Found this link if:
  http://h30434.www3.HP.com/T5/inkjet-printing/printing-crooked-on-the-sheets/TD-p/166647

  AMD issues resolved

• printer all in one psc 2210xi while trying to align the cartridge HP (Vista) "paper mismatch".

  I changed a cartridge and try to align the cartridge but keeps paper be ejected with message "paper mismatch" on the front panel of the printer.  Same paper and size I always use but I changed out, unplugged and reset the printer and made sure pc the printer settings are compatible with the paper type and size as well.  Still no luck.  I know that this printer is older but it was gently used

  In fact, I had already read the news you mentioned me and it did not apply to my situation of paper.  I was using standard letter size paper and had not changed type and size.  What I found useful is a blog that mentioned by changing the properties of the printer; printing preferences; type.  I got the paper type "automatic" and I changed to "plain paper" as the recommended blog.  After that, I was able to align the ink cartridges and print as usual.  I still have no idea what caused the problem in the first place since the previous setting was what I always used.  Thanks for your interest.

• Hp6500A more than paper Mismatch issue

  I recently to question of error "paper mismatch" that stop me printing on my Hp 6500 a Plus. I checked and rechecked all of the default settings. With standard 8.5 X 11 paper plane and "Letter" size paper selection, I can not always clearly the question. I rebooted the paper, reset the printer to default settings, reloaded the driver, unplugged the printer and restarted, etc, etc, but no joy on print. I'm afraid that the paper sensor may have blamed outside. Don't know how to check this.

  Any ideas would be greatly appreciated.

  Thank you

  Hi Landrover1,

  I want to help you to be able to print without having seen the paper mismatch error. Please use the solutions in the following document to solve the problem. Solve a 'Paper mismatch' error.

  I hope this helps.

• I just changed my cartridge and now I keep getting a "paper mismatch" errors How can I fix it? T

  All-in-one C4280

  Windows Vista 32 bit

  Just replaced the HP 74 ink cartridge

  I was finally able to solve the problem. I have uninstalled and reinstalled the printer software, and renamed the prnter. Alignment and paper mismatch error messages dusappeared after I did. Thank you