Parameters not passed to navigate of BI content action link
HelloAttempted to get an action link that will take me from a dashboard to another and change one parameter in the analysis of target dashboards, all in the same window working.
I tried to do this with an action link, 'Navigate to BI', content creating an action on one source analytical column I want the value to be passed to the target report and created a "filter"is invited"on the same column in the analysis of the target.
Once clicked on it navigates as expected to the target report, but there is no filtering in fact, it is as the source report parameter doesn't get spent in the analysis of the target.
The only thing I can think of is that navigate to the BI content does not work if you navigate between the 2 tables of facts, even if the column names are the same in each analysis. Can anyone confirm this?
The column that you are using as filter (guest) must be same in the dashboards of source and target.
Tags: Business Intelligence
Similar Questions
-
Action links via the browser to invoke script are not passage of parameter
Hello
I followed below Rittman blog for this exercise:
But for some reason when I passes the name of the column the column parameter and the value fo the column to the setting it does not pass to the dashboard page. The link goes to the page mentioned dashboard, but it is not the setting of the underlying page.
I did not indicate the correct setting. Referred to this blog and it helped.
-
I recently downloaded windows xp and he tells me is not passed windows genuine. How can I spend without having to buy it again?
It is likely that if you have downloaded XP a purchase, that it's a forgery, because MS has not sold XP Download drink for years.
As says Carey - we need to check it out...
To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
Once saved, run the tool.
Click on the button continue, which will produce the report.
To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
-* in your own thread *, pleasePlease also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
http://www.Microsoft.com/howtotell/content.aspx?PG=COA -
Hello
I'll put up a tunnel vpn site-to-site between two locations. Both have cisco ASA 5505 running a different version, I'll explain in more detail below. so far, I was able to get the tunnel to come but I can't seem to pass traffic, I work at this for days now and have not been able to understand why he will not pass traffic. Needless to say that the customer's PO would be on the fact that their VPN is not upward and they had to do by hand. I'll put the configs below, if possible can someone help me as soon as POSSIBLE, I really want to get this site up and running so that we do not lose the customer.
An IP address of 0.0.0.0 = site
Site B IP = 1.1.1.1A Version of the site = 8.3.1
Version of the site B = 9.2.3__________________________
_________A RACE OF THE SITE CONFIGURATION
Output of the command: "sh run".
: Saved
:
ASA Version 8.3 (1)
!
hostname SDMCLNASA01
SDMCLNASA01 domain name. LOCAL
Select 5E8js/Fs7qxjxWdp of encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Vlan1
nameif inside
security-level 100
the IP 192.168.0.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
the IP 0.0.0.0 255.255.255.252
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT
DNS lookup field inside
DNS domain-lookup outside
DNS server-group DefaultDNS
SDMCLNASA01 domain name. LOCAL
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of the NETWORK_OBJ_192.168.0.0_24 object
192.168.0.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
network lan_internal object
192.168.0.0 subnet 255.255.255.0
purpose of the smtp network
Home 192.168.0.245
Network http object
Home 192.168.0.245
rdp network object
Home 192.168.0.245
network ssl object
Home 192.168.0.245
network camera_1 object
host 192.168.0.13
network camerahttp object
host 192.168.0.13
service object 8081
source eq 8081 destination eq 8081 tcp service
Dvr description
network camera-http object
host 192.168.0.13
network dvr-http object
host 192.168.0.13
network dvr-mediaport object
host 192.168.0.13
object-group Protocol DM_INLINE_PROTOCOL_1
object-protocol udp
object-tcp protocol
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
DM_INLINE_TCP_1 tcp service object-group
EQ port 3389 object
port-object eq www
EQ object of the https port
EQ smtp port object
DM_INLINE_TCP_2 tcp service object-group
port-object eq 34567
port-object eq 34599
EQ port 8081 object
permit access ip 192.168.0.0 scope list outside_1_cryptomap 255.255.255.0 192.168.1.0 255.255.255.0
outside_access_in list extended access permit tcp any any eq smtp
outside_access_in list extended access permit tcp any any DM_INLINE_TCP_1 object-group
outside_access_in list extended access permit tcp any any DM_INLINE_TCP_2 object-group
permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static static source NETWORK_OBJ_192.168.1.0_24 destination NETWORK_OBJ_192.168.0.0_24 NETWORK_OBJ_192.168.0.0_24 NETWORK_OBJ_192.168.1.0_24
NAT (exterior, Interior) static static source NETWORK_OBJ_192.168.0.0_24 destination NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.0.0_24
!
network lan_internal object
NAT dynamic interface (indoor, outdoor)
purpose of the smtp network
NAT (all, outside) interface static tcp smtp smtp service
Network http object
NAT (all, outside) interface static tcp www www service
rdp network object
NAT (all, outside) interface static service tcp 3389 3389
network ssl object
NAT (all, outside) interface static tcp https https service
network dvr-http object
NAT (all, outside) interface static 8081 8081 tcp service
network dvr-mediaport object
NAT (all, outside) interface static 34567 34567 tcp service
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 71.42.194.209 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
http server enable 8080
http 192.168.0.0 255.255.255.0 inside
http 192.168.1.0 255.255.255.0 inside
http 192.168.1.0 255.255.255.0 outside
http 71.40.221.136 255.255.255.252 inside
http 71.40.221.136 255.255.255.252 outside
http 192.168.0.0 255.255.255.0 outside
http 97.79.197.42 255.255.255.255 inside
http 97.79.197.42 255.255.255.255 outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set peer 1.1.1.1
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
outside_map interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd address 192.168.0.50 - 192.168.0.150 inside
dhcpd dns 192.168.0.245 209.18.47.62 interface inside
dhcpd SDMCLNASA01 field. LOCAL inside interface
dhcpd allow inside
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec
tunnel-group 1.1.1.1 type ipsec-l2l
tunnel-group 1.1.1.1 ipsec-attributes
pre-shared key *.
!
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
!
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:462428c25e9748896e98863f2d8aeee7
: end________________________________
SITE B RUNNING CONFIG
Output of the command: "sh run".
: Saved
:
: Serial number: JMX1635Z1BV
: Material: ASA5505, 512 MB RAM, 500 MHz Geode Processor
:
ASA Version 9.2 (3)
!
ciscoasa hostname
activate qddbwnZVxqYXToV9 encrypted password
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 1.1.1.1 255.255.255.252
!
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network camera_http object
host 192.168.1.13
network camera_media object
host 192.168.1.13
network of the NETWORK_OBJ_192.168.0.0_24 object
192.168.0.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
outside_access_in list extended access permit tcp any any eq 9000
outside_access_in list extended access permit tcp any any eq www
outside_access_in list extended access permit icmp any one
outside_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object NETWORK_OBJ_192.168.0.0_24
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
ASDM image disk0: / asdm - 732.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static static source NETWORK_OBJ_192.168.0.0_24 destination NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.0.0_24
NAT (exterior, Interior) static static source NETWORK_OBJ_192.168.1.0_24 destination NETWORK_OBJ_192.168.0.0_24 NETWORK_OBJ_192.168.0.0_24 NETWORK_OBJ_192.168.1.0_24
!
network camera_http object
NAT (all, outside) interface static tcp www www service
network camera_media object
NAT (all, outside) interface static 9000 9000 tcp service
!
NAT source auto after (indoor, outdoor) dynamic one interface
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 71.40.221.137 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 peer set 0.0.0.0
card crypto outside_map 1 set transform-set ESP-3DES-SHA ikev1
outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev1 allow outside
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0dhcpd address 192.168.1.50 - 192.168.1.150 inside
dhcpd dns 192.168.0.245 209.18.47.61 interface inside
dhcpd SDPHARR field. LOCAL inside interface
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
AnyConnect essentials
attributes of Group Policy DfltGrpPolicy
Ikev1 VPN-tunnel-Protocol
internal GroupPolicy_0.0.0.0 group strategy
attributes of Group Policy GroupPolicy_0.0.0.0
VPN-tunnel-Protocol ikev1, ikev2
tunnel-group 0.0.0.0 type ipsec-l2l
tunnel-group 0.0.0.0 ipsec-attributes
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
!
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:19031ab1e3bae21d7cc8319fb7ecf0eb
: endSorry my mistake.
Delete this if it's still there
card crypto external_map 1 the value reverse-road
Add this to both sides
card crypto outside_map 1 the value reverse-road
Sorry about that.
Mike
-
New options of parameters to pass in the use of action list
Hi all
In the Actions list, there is an option to select "new parameters to pass. Can someone tell me how or what is used for?
Thanks in advance.
Action pass parameters generates an HTTP POST request containing the attribute values of selected parameters of PUBLICATION records.
The destination URL would then be configured to perform an action based on these parameters.
It is slightly different from a hyperlink action that navigates to a URL, which may include as parameters attribute values.
-
Values not passed to the service VIEW FML
Hello
Use Tuxedo10g R3 on AIX 5.3.
I wrote a Tuxedo application model that takes the customer data and transmit these data to the Service via FML VIEW dependent and the server converts the data passed in capital letters and return to the customer...
I created the table field and FML VIEW dependent file and set the required environment variables and I built the client and the server.
After running the object module is called the service, but the values are not passed to the service and the data is not converted to uppercase.
The table field file is as follows:
"sampfml" 4 lines, 159 characters# name number type flags comments
FML VIEW dependent:
Chain of FIRSTSTR1 110-
Chain of SECONDSTR1 111-
String of 112 THIRDSTR1 -VIEWS sampview
environment variables that I put are:
indicator of County # type cname fbna size null
String firststr FIRSTSTR1 1-10. \0
String secondstr SECONDSTR1 1-10. \0
String thirdstr THIRDSTR1 1-10. \0
END#FIELDTBLS
my customer code:
#
FIELDTBLS = sampfml, fields, Usysflds
#
#FLDTBLDIR
#
FLDTBLDIR = ${TUXDIR} / udataobj: ${APPDIR}
#
#VIEWDIR
#
VIEWDIR = ${APPDIR}
#
#VIEWFILES
#
VIEWFILES = sampview. V
IDENTIFICATION DIVISION.
PROGRAM-ID. SIMPCL.
AUTHOR. DEVELOPMENT OF TUX.
ENVIRONMENTAL DIVISION.
SECTION OF CONFIGURATION.
DATA DIVISION.
STORAGE SECTION OF WORK.
*****************************************************
* Definitions of tuxedo
*****************************************************
TPTYPE 01 - REC.
COPY TPTYPE.
*
TPSTATUS 01 - REC.
COPY TPSTATUS.
*
TPSVCDEF 01 - REC.
COPY TPSVCDEF.
*
TPINFDEF 01 - REC.
COPY TPINFDEF.
*
FML 01 - REC.
COPY FMLINFO.
*
01 MYFML.
F-05 DATA PIC X (10).
05 PIC S-DATA X (10).
T-05 DATA PIC X (10).
FILLER 05 PIC X (30).
*****************************************************
* Definitions log messages
*****************************************************
01 LOGMSG.
VALUE OF FILL 05 PIC X (8) ' SIMPCL:
LOGMSG 05-TEXT PIC X (50).
01 LOGMSG-LEN PIC S9 (9) COMP-5.
*
STRING 01 DATA.
COPY sampview.
ENTER 01-STRING.
05 S-FIRST PIC X (10).
05 S-SECOND PIC X (10).
05 S-THIRD PIC X (10).
PEAK USER-DATA-REC 01 X (75).
SECTION OF LIAISON.
******************************************************
* Start the program with command line parameters
******************************************************
THE PROCEDURE DIVISION.
MOVE DOWN-VALUES TO TPINFDEF-REC.
MOVE ALL THE LOGMSG TO LOGMSG-LEN.
START-SIMPCL.
LOGMSG-TEXT, MOVE "on the road".
PERFORM DES USERLOG.
PERFORM DES TPINIT.
ACCEPT S FIRST.
ACCEPT THE SECOND S.
ACCEPT S THIRD.
S-FIRST MOVEMENT FIRSTSTR.
SPEND S-SECOND TO SECONDSTR.
PASS S-THIRD AT THIRDSTR.
DISPLAY ' VALUES BEFORE: "-THE STRING DATA.".
DISPLAY "FML: ' MYFML.
PERFORM DES TPCALL.
DISPLAY "DATA AFTER CONVERSION:
DISPLAY FIRSTSTR.
DISPLAY SECONDSTR.
DISPLAY THIRDSTR.
PERFORM DES TPTERM.
MAKE THE PROGRAM EXIT.
*****************************************************
* Now put the customer in the system.
*****************************************************
-TPINIT.
MOVING TO USRNAME SPACES.
MOVE TO CLTNAME BOXES.
MOVE TO BOXES TO PASSWD.
MOVE TO BOXES TO GRPNAME.
MOVE 0 TO DATALEN.
TPU - DIP SET TO TRUE.
*
CALL FOR ASSISTANCE "TPINITIALIZE" TPINFDEF-REC
USER-DATA-REC
TPSTATUS-REC.
IF NOT OK
MOVE "TPINITIALIZE failed" LOGMSG-text
PERFORM DES USERLOG
MAKE THE PROGRAM EXIT
END-IF.
*****************************************************
Issue of a TPCALL
*****************************************************
-TPCALL.
MOVE ALL MYFML FLM-LENGTH.
CALL "ENDS" WITH THE HELP OF MYFML FLM - REC.
OTHERWISE FOK
MOVE "FINALLY failed" LOGMSG-text
PERFORM DES USERLOG
MAKE THE PROGRAM EXIT.
FUPDATE SET TO TRUE.
MOVE 'sampview' to VIEWNAME.
CALL "FVSTOF" WITH THE HELP OF STRING FML - REC MYFML-DATA.
OTHERWISE FOK
MOVE 'FVSTOF failed' to LOGMSG-TEXT
PERFORM DES USERLOG
FLM-DISPLAY STATUS
MAKE THE PROGRAM EXIT.
MOVE "FLM" REC-INDICATE THE TPTYPE-REC.
MOVE SPACES OF SUB-TYPE IN TPTYPE-REC.
MOVE ALL MYFML TO LEN.
GO "SIMPSRV" - NAME OF THE SERVICE.
TPBLOCK SET TO TRUE.
TPNOTRAN SET TO TRUE.
TPNOTIME SET TO TRUE.
TPSIGRSTRT SET TO TRUE.
TPCHANGE SET TO TRUE.
CALL FOR ASSISTANCE "TPCALL" TPSVCDEF-REC
TPTYPE-REC
MYFML
TPTYPE-REC
MYFML
TPSTATUS-REC.
IF NOT OK
MOVE "TPCALL failed" LOGMSG-text
PERFORM DES USERLOG
END-IF.
CALL "FVFTOS" WITH THE HELP OF STRING FML - REC MYFML-DATA.
OTHERWISE FOK
MOVE 'FVFTOS failed' to LOGMSG-TEXT
PERFORM DES USERLOG
MAKE THE PROGRAM EXIT.
*****************************************************
* Let TUXEDO
*****************************************************
-TPTERM.
CALL FOR ASSISTANCE "TPTERM" TPSTATUS-REC.
IF NOT OK
MOVE "TPTERM failed" LOGMSG-text
PERFORM DES USERLOG
END-IF.
*****************************************************
* Saves messages in the userlog
*****************************************************
-USERLOG.
CALL FOR ASSISTANCE "USERLOG" LOGMSG
LOGMSG-LEN
TPSTATUS-REC.
*****************************************************
* Request for leave
*****************************************************
EXIT-PROGRAM.
MOVE 'done' LOGMSG-TEXT.
PERFORM DES USERLOG.
STOP EXECUTION.
My server code:
IDENTIFICATION DIVISION.
PROGRAM-ID. SIMPSRV.
AUTHOR. DEVELOPMENT OF TUX.
ENVIRONMENTAL DIVISION.
SECTION OF CONFIGURATION.
DATA DIVISION.
STORAGE SECTION OF WORK.
******************************************************
* Definitions of tuxedo
******************************************************
TPSVCRET 01 - REC.
COPY TPSVCRET.
*
TPTYPE 01 - REC.
COPY TPTYPE.
*
TPSTATUS 01 - REC.
COPY TPSTATUS.
*
TPSVCDEF 01 - REC.
COPY TPSVCDEF.
******************************************************
* Definitions of log messages
******************************************************
01 LOGMSG.
VALUE OF FILL 05 PIC X (10)
"SIMPSRV:
LOGMSG 05-TEXT PIC X (50).
01 LOGMSG-LEN PIC S9 (9) COMP-5.
******************************************************
* Data records user defined
******************************************************
STRING 01 DATA.
COPY sampview.
01 MYFML.
F-05 DATA PIC X (10).
05 PIC S-DATA X (10).
T-05 DATA PIC X (10).
FILLER 05 PIC X (30).
*
SECTION OF LIAISON.
*
THE PROCEDURE DIVISION.
*
START-FUNDUPSR.
MOVE ALL THE LOGMSG TO LOGMSG-LEN.
LOGMSG-TEXT, MOVE "on the road".
PERFORM DES USERLOG.
******************************************************
* Get the data that has been sent by the client
******************************************************
MOVE ALL MYFML TO LEN.
MOVING MYFML LOGMSG-TEXT.
PERFORM DES USERLOG.
CALL USING 'TPSVCSTART' TPSVCDEF-REC
TPTYPE-REC
MYFML
TPSTATUS-REC.
IF NOT OK
MOVE 'TPSVCSTART failed' to LOGMSG-TEXT
PERFORM DES USERLOG
MAKE THE PROGRAM EXIT
END-IF.
IF TPTRUNCATE
MOVE "Data has been truncated" LOGMSG-TEXT
PERFORM DES USERLOG
MAKE THE PROGRAM EXIT
END-IF.
MOVING FIRSTSTR LOGMSG-TEXT.
PERFORM DES USERLOG.
MOVING SECONDSTR LOGMSG-TEXT.
PERFORM DES USERLOG.
MOVING THIRDSTR LOGMSG-TEXT.
PERFORM DES USERLOG.
INSPECT THE FIRSTSTR CONVERSION
"abcdefghijklmnopqrstuvwxyz" to
"ABCDEFGHIJKLMNOPQRSTUVWXYZ"
INSPECT THE SECONDSTR CONVERSION
"abcdefghijklmnopqrstuvwxyz" to
"ABCDEFGHIJKLMNOPQRSTUVWXYZ"
INSPECT THE THIRDSTR CONVERSION
"abcdefghijklmnopqrstuvwxyz" to
"ABCDEFGHIJKLMNOPQRSTUVWXYZ"
MOVE FIRSTSTR TO S-FIRST.
MOVE SECONDSTR TO S-SECONDS.
MOVE THIRDSTR TO S THIRD.
MOVE 'Success' to LOGMSG-TEXT.
PERFORM DES USERLOG.
MOVE TO ENTER STRING LOGMSG-TEXT.
PERFORM DES USERLOG.
TPSUCCESS SET TO TRUE.
COPY TPRETURN REPLACEMENT
DATA-REC MYFML.
******************************************************
* Write an err messages disconnect
******************************************************
-USERLOG.
CALL FOR ASSISTANCE "USERLOG" LOGMSG
LOGMSG-LEN
TPSTATUS-REC.
******************************************************
* EXIT PROGRAM
******************************************************
EXIT-PROGRAM.
LOGMSG-TEXT, MOVE "has failed."
PERFORM DES USERLOG.
TPFAIL SET TO TRUE.
COPY TPRETURN REPLACEMENT
DATA-REC MYFML.
And when execution of the module of the object:SIMPCL
can anyone help me with this?
Hello
Hello
World
VALUES BEFORE: Hello Hello World
FML:
DATA AFTER CONVERSION:
Hello
Hello
World
Thank you...Hello
In the server program, you must call FVFTOS to convert the COBOL record FML buffer, then do the translation. After that, you must also call 'FVSTOF' to convert it back to FML. I can get the correct results with your program with these changes.
Customer
======================
IDENTIFICATION DIVISION.
PROGRAM-ID. CSIMPCL.
AUTHOR. DEVELOPMENT OF TUX.
ENVIRONMENTAL DIVISION.
SECTION OF CONFIGURATION.
STORAGE SECTION OF WORK.
*****************************************************
* Definitions of tuxedo
*****************************************************
TPTYPE 01 - REC.
COPY TPTYPE.
*
TPSTATUS 01 - REC.
COPY TPSTATUS.
*
TPSVCDEF 01 - REC.
COPY TPSVCDEF.
*
VALUES-01 TPINFDEF-REC VALUE LOW.
COPY TPINFDEF.
*
FML 01 - REC.
COPY FMLINFO.
*
01 MYFML.
F-05 DATA PIC X (10).
05 PIC S-DATA X (10).
T-05 DATA PIC X (10).
FILLER 05 PIC X (30).
*****************************************************
* Definitions log messages
*****************************************************
01 LOGMSG.
VALUE OF FILL 05 PIC X (8) ' CSIMPCL:
LOGMSG 05-TEXT PIC X (50).
01 LOGMSG-LEN PIC S9 (9) COMP-5.
*
STRING 01 DATA.
COPY sampview.
*
ENTER 01-STRING.
05 S-FIRST PIC X (10).
05 S-SECOND PIC X (10).
05 S-THIRD PIC X (10).
*
PEAK USER-DATA-REC 01 X (75).
SECTION OF LIAISON.
******************************************************
* Start the program with command line parameters
******************************************************
THE PROCEDURE DIVISION.
START-CSIMPCL.
LOGMSG-TEXT, MOVE "on the road".
PERFORM DES USERLOG.
PERFORM DES TPINIT.
MOVE 'Hi' to FIRSTSTR.
MOVE the 'Hello' to SECONDSTR.
MOVE the 'world' to THIRDSTR.
DISPLAY ' VALUES BEFORE: "-THE STRING DATA.
DISPLAY "FML: ' MYFML.
PERFORM DES TPCALL.
DISPLAY ' VALUES AFTER:
DISPLAY FIRSTSTR.
DISPLAY SECONDSTR.
DISPLAY THIRDSTR.
PERFORM DES TPTERM.
MAKE THE PROGRAM EXIT.
*****************************************************
* Now put the customer in the system.
*****************************************************
-TPINIT.
MOVING TO USRNAME SPACES.
MOVE TO CLTNAME BOXES.
MOVE TO BOXES TO PASSWD.
MOVE TO BOXES TO GRPNAME.
MOVE 0 TO DATALEN.
TPU - DIP SET TO TRUE.
*
CALL FOR ASSISTANCE "TPINITIALIZE" TPINFDEF-REC
USER-DATA-REC
TPSTATUS-REC.IF NOT OK
MOVE "TPINITIALIZE failed" LOGMSG-text
PERFORM DES USERLOG
MAKE THE PROGRAM EXIT
END-IF.-TPCALL.
MOVE ALL MYFML FLM-LENGTH.
DISPLAY 'LENGTH OF MYFML.
FML-LENGTH DISPLAY.
CALL "ENDS" WITH THE HELP OF MYFML FLM - REC.
OTHERWISE FOK
MOVE "FINALLY failed" LOGMSG-text
PERFORM DES USERLOG
MAKE THE PROGRAM EXIT
END-IF.
FUPDATE SET TO TRUE.
MOVE 'sampview' to VIEWNAME.
CALL "FVSTOF" WITH THE HELP OF STRING FML - REC MYFML-DATA.
OTHERWISE FOK
MOVE 'FVSTOF failed' to LOGMSG-TEXT
PERFORM DES USERLOG
FLM-DISPLAY STATUS
MAKE THE PROGRAM EXIT
END-IF.MOVE "FLM" REC-INDICATE THE TPTYPE-REC.
MOVE SPACES OF SUB-TYPE IN TPTYPE-REC.
MOVE ALL MYFML TO LEN.GO "SIMPSRV" - NAME OF THE SERVICE.
TPBLOCK SET TO TRUE.
TPNOTRAN SET TO TRUE.
TPNOTIME SET TO TRUE.
TPSIGRSTRT SET TO TRUE.
TPCHANGE SET TO TRUE.CALL FOR ASSISTANCE "TPCALL" TPSVCDEF-REC
TPTYPE-REC
MYFML
TPTYPE-REC
MYFML
TPSTATUS-REC.
IF NOT OK
MOVE "TPCALL failed" LOGMSG-text
PERFORM DES USERLOG
END-IF.CALL "FVFTOS" WITH THE HELP OF STRING FML - REC MYFML-DATA.
OTHERWISE FOK
MOVE 'FVFTOS failed' to LOGMSG-TEXT
PERFORM DES USERLOG
MAKE THE PROGRAM EXIT
END-IF.*****************************************************
* Let TUXEDO
*****************************************************
-TPTERM.
CALL FOR ASSISTANCE "TPTERM" TPSTATUS-REC.
IF NOT OK
MOVE "TPTERM failed" LOGMSG-text
PERFORM DES USERLOG
END-IF.*****************************************************
* Saves messages in the userlog
*****************************************************
-USERLOG.
CALL FOR ASSISTANCE "USERLOG" LOGMSG
LOGMSG-LEN
TPSTATUS-REC.*****************************************************
* Request for leave
*****************************************************
EXIT-PROGRAM.
MOVE 'done' LOGMSG-TEXT.
PERFORM DES USERLOG.
STOP EXECUTION.Server
====================================
IDENTIFICATION DIVISION.
PROGRAM-ID. SIMPSRV.
AUTHOR. DEVELOPMENT OF TUX.
ENVIRONMENTAL DIVISION.
SECTION OF CONFIGURATION.DATA DIVISION.
STORAGE SECTION OF WORK.
******************************************************
* Definitions of tuxedo
******************************************************
TPSVCRET 01 - REC.
COPY TPSVCRET.
*
TPTYPE 01 - REC.
COPY TPTYPE.
*
TPSTATUS 01 - REC.
COPY TPSTATUS.
*
TPSVCDEF 01 - REC.
COPY TPSVCDEF.
*
FML 01 - REC.
COPY FMLINFO.
******************************************************
* Definitions of log messages
******************************************************
01 LOGMSG.
VALUE OF FILL 05 PIC X (10)
"SIMPSRV:
LOGMSG 05-TEXT PIC X (50).
01 LOGMSG-LEN PIC S9 (9) COMP-5.
******************************************************
* Data records user defined
******************************************************
STRING 01 DATA.
COPY sampview.
ENTER 01-STRING.
05 S-FIRST PIC X (10).
05 S-SECOND PIC X (10).
05 S-THIRD PIC X (10).
*
01 MYFML.
F-05 DATA PIC X (10).
05 PIC S-DATA X (10).
T-05 DATA PIC X (10).
FILLER 05 PIC X (30).*
SECTION OF LIAISON.
*
THE PROCEDURE DIVISION.
*
START-FUNDUPSR.
MOVE ALL THE LOGMSG TO LOGMSG-LEN.
LOGMSG-TEXT, MOVE "on the road".
PERFORM DES USERLOG.******************************************************
* Get the data that has been sent by the client
******************************************************
MOVE ALL MYFML TO LEN.
MOVING MYFML LOGMSG-TEXT.
PERFORM DES USERLOG.
CALL USING 'TPSVCSTART' TPSVCDEF-REC
TPTYPE-REC
MYFML
TPSTATUS-REC.IF NOT OK
MOVE 'TPSVCSTART failed' to LOGMSG-TEXT
PERFORM DES USERLOG
MAKE THE PROGRAM EXIT
END-IF.IF TPTRUNCATE
MOVE "Data has been truncated" LOGMSG-TEXT
PERFORM DES USERLOG
MAKE THE PROGRAM EXIT
END-IF.MOVE 'sampview' to VIEWNAME
CALL "FVFTOS" WITH THE HELP OF STRING FML - REC MYFML-DATA.
OTHERWISE FOK
MOVE "FVFTOS failed" LOGMSG-TEXT
PERFORM DES USERLOG
MAKE THE PROGRAM EXIT
END-IF.
MOVE 'DOING OK FVFTOS' LOGMSG-TEXT.
PERFORM DES USERLOG.
MOVING FIRSTSTR LOGMSG-TEXT.
PERFORM DES USERLOG.
MOVING SECONDSTR LOGMSG-TEXT.
PERFORM DES USERLOG.
MOVING THIRDSTR LOGMSG-TEXT.
PERFORM DES USERLOG.
INSPECT THE FIRSTSTR CONVERSION
"abcdefghijklmnopqrstuvwxyz" to
"ABCDEFGHIJKLMNOPQRSTUVWXYZ"
INSPECT THE SECONDSTR CONVERSION
"abcdefghijklmnopqrstuvwxyz" to
"ABCDEFGHIJKLMNOPQRSTUVWXYZ"
INSPECT THE THIRDSTR CONVERSION
"abcdefghijklmnopqrstuvwxyz" to
"ABCDEFGHIJKLMNOPQRSTUVWXYZ"
MOVE FIRSTSTR TO S-FIRST.
MOVE SECONDSTR TO S-SECONDS.
MOVE THIRDSTR TO S THIRD.
MOVE 'Success' to LOGMSG-TEXT.
PERFORM DES USERLOG.
MOVE TO ENTER STRING LOGMSG-TEXT.
PERFORM DES USERLOG.
FUPDATE SET TO TRUE.
MOVE 'sampview' to VIEWNAME.
CALL "FVSTOF" WITH THE HELP OF STRING FML - REC MYFML-DATA.
OTHERWISE FOK
MOVE 'FVSTOF failed' to LOGMSG-TEXT
PERFORM DES USERLOG
FLM-DISPLAY STATUS
MAKE THE PROGRAM EXIT
END-IF.TPSUCCESS SET TO TRUE.
COPY TPRETURN REPLACEMENT
DATA-REC MYFML.******************************************************
* Write an err messages disconnect
******************************************************
-USERLOG.
CALL FOR ASSISTANCE "USERLOG" LOGMSG
LOGMSG-LEN
TPSTATUS-REC.
******************************************************
* EXIT PROGRAM
******************************************************
EXIT-PROGRAM.
LOGMSG-TEXT, MOVE "has failed."
PERFORM DES USERLOG.
TPFAIL SET TO TRUE.
COPY TPRETURN REPLACEMENT
DATA-REC MYFML.The result looks like,
The VALUES BEFORE: Hello Hello World
FML:
LENGTH MYFML
+ 0000000060
VALUES AFTER:
Hello
Hello
WORLDIn addition, in your client program FILLING only given size 10, not compatible with the side server, which is 30. I use the same size in the client and the server.
I also interested in why do you use style convert FML/VIEW? If both a pure COBOL, just with VIEW program is easier programming, just a suggestion.Kind regards
Wayne -
When a pop-up window opens in a new tab, do NOT pass it immediately
Hello.
I changed the value of browser.link.open_newwindow.restriction from 2 to 0. Now pop-ups will open in a new tab instead of new window, which is cool.
But still firefox goes immediately to the ToolTip that gets opened in a new tab.
I want to have firefox in a way that, when a pop-up window is opened in a new tab, do NOT pass it immediately.Note: The option "when I open a link in a new tab, switch to it immediately" in the menu Options-> tabs, is already disabled.
Try to set the pref browser.tabs.loadDivertedInBackground to true on the topic: config page.
-
Gateway device Managemeny could not pass authentication
Hello
We are upgrading of HPDM 4.6 to 4.7 and the keystore file has been deleted in the process. So, we get this log message whenever we try to send a job to one of our machines:
"Agent denied the task because the device management gateway could not pass authentication".
I deleted the two files of C:\Windows\xpeagent key on one of the machines and that seems to have solved the problem - for this computer. Repeat this process for ALL our machines would be a daunting task.
Is there another way to resynchronize the devices with the server, or are we out of luck?
If we should not touch each machine individually, anyone has advice or scripts to speed up the process?
Thanks in advance for any advice you can offer!
I can't figure out how to import the database into the latest version of the client server postgre and I already spent a lot of time on this project. I don't have the password to the database to original then I would probably just be stuck again, in any case. We're going to rename the key on clients computers files for now. Thanks for your help!
-
Satellite T130 - 10G: Firefox does not read any video or flash content more
My Firefox does not read any video or flash content more. And in watching the news of repair troubleshooting/malfunction in Firefox under graphics, he said that "Direct2D activated" and 'WebGL Renderer' have been blocked because of the version of the graphics driver.
I downloaded a new version on the Toshiba site, but an update of the driver can not find the new version.
I had briefly solved the problem by installing the new driver from the file but it is not recognized in Device Manager.Automatic update through Windows just tells me that the driver is up-to-date.
I have the Satellite T130 - 10G.Would be great if someone could help.
Thank you!
Hmmmm... as you know Toshiba doesn't support third party software so I think that your question has nothing to do with Toshiba directly.
You find the same content with other browsers?
-
I got an iphone 4 to a friend in the Canada. I want to use it here in the Philippines as a regular iPad reserved for wifi, how can I use it without sim card? It does not pass the activation page. Help please?
You can activate it without a SIM card. If it is locked, it takes a SIM card by the carrier, for it is locked. The SIM card should not be linked to an active line of service, but it must be present to activate it.
-
Computer hp laptop 15 will not pass the logon screen
I go from 8.1 to 10. Had problems with USB and asked the Microsoft Chat Help. They fixed but my keyboard and wifi would not work. They tried again and after that they have restarted the computer remotely it will not pass the logon screen (time/date). The screen and the keyboard manual do not work. I have a hp laptop 15. They want to take their store service 02:30 minutes away. Any help?
Hi @samlobos,
Thank you for joining the HP Forums!
I read your post that your 15 HP laptop is not going to pass the opening screen. I'm happy to help you!
Please, try the steps in this guide, the computer does not (Windows 10). If this does not resolve the problem, contact HP telephone support for further assistance for the maintenance options. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.
If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.
I hope that this post helps!
-
WY the message about not to test the Windows Logo on these drivers as follows: Legacy Driver, Activity Monitor and no plug-and-play drivers
Hi John,.
Thanks for posting this question in the Microsoft Community.
I'll certainly try and help you get the problem solved. Please provide us with some answers before proceeding.
1. when exactly you get the error message?
2. are you aware of any changes made to the computer before the show?
This type of error message arises usually when the driver that you are trying to install has not passed the Windows logo test or is not approved by Microsoft.
Here is a link with a few steps of good to help solve problems like yours. Go through the steps from 1 to 10 and check if that helps.
Hope this helps and provide us more information if you need more assistance. We will be happy to help.
-
How can I remove "ask for authentic" microsoft in my computer software?
It shows a message to the right down corner of my desk that says "you may be victim of software counterfeiting. " This copy of windows does not pass genuine windows validation. »"Once you install a Windows operating system license 'authentic', the" ""you may be victim of software counterfeiting " notification will disappear.
-
Brother HL-2140 printer has not passed logo testing for XP
Use printer Brother HL-2140 for nearly two years without problem. Recently started to receive the message "Printer not passed Windows Logo testing to verify its compatibility with Windows XP Pro." Tried to change the settings through "driver settings" and "security options". Printer works but I find annoying pop ups whenever I go to print something.
If you uninstall the current driver can change the warn to ignore, restart your computer and reinstall the current driver the popup should disappear.
This is the driver that is causing the popup.
-
I want to add an adapter usb to my computer to watch movies on my TV. It came with the software, however the download access is denied.
When you install the hardware in your computer (almost always), you must install a 'pilot', which is just software that tells your operating system (Windows, in your case) how to communicate with the hardware.
Microsoft has a program she calls 'the logo test' which enables a company to label its products with the Windows logo. Not every small manufacturer wants to go through the load of this test program, but if a company is trustworthy - and Trendnet is - then the fact that their products have not passed official testing procedures from Microsoft doesn't mean that their products will not work with Windows. This is why you can usually ignore a message to the effect that a product has not passed Windows logo testing - if you also a pretty good reason to believe that the product will work.
So just follow the instructions supplied with the adapter installation, put on the CD and install the software. But the installation of this card is only the first part of your trip.
Although I've not set my TV to watch streaming video from Netflix or Amazon, as I understand it, you need a TV that can be connected directly to the Internet. In other words, you cannot download and save a copy of the video complete on your computer and then read it from your computer to the TV. That's why's called it "streaming" video - you're not supposed to save a copy to your computer, but rather to look at the 'stream '.
Thus, Amazon said, "the easiest way is to connect your TV to your router or modem broadband (DSL/Cable, for example) with an ethernet cable.»
A lot of people with a connection broadband has a router, which has generally 4 Ethernet Sockets (and perhaps a point of both wireless access). If you had one, you would just connect a "vacant" Ethernet between the TV and a cable to your router. You, unfortunately, have a router with a single Ethernet Jack (I know you thought it as a modem, but it's almost certainly a modem and a router inside a box of Physics). So, as you acknowledged, you don't connect your TV to the cable modem because it would need to disconnect your computer.
You have two choices.
You can buy a cheap Ethernet switch (e.g. this one) which would connect you to port on the back of the modem cable and then connect your computer and TV to two of the other ports on the switch. This would probably work without having to make adjustments to configuration on your cable modem - but in the past, some customers wanted cable ISPS to pay extra for each computer connected to the modem cable and makes it a little difficult to so add connections on your own. I don't think that is always the case, but because I don't have cable - especially not the same cable ISP like you - I don't know about you.
Or you can buy a second Ethernet adapter of your computer (which is what you did) and then set up the "Internet connection sharing" (ICS) on your computer so that the TV can connect to the Internet through your computer. Because you have already purchased this material, you probably want to set up ICS.
Although there are many websites that explain how to configure ICS, because XP is becoming obsolete quickly, many of the older sites are more fully functional, including one who should have been better to show your situation (sharing a connection to local network to the Internet with another connection of LAN)
Use the Network Setup Wizard. Go to network connections (start > run > ncpa.cpl > OK) and click on "Set up a small business network or home."
The 3rd screen looks like this--> http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Setup_Wizard/03_%28directly_connected%29.shtml
Choose the first choice. Even if your computer connects 'via a residential gateway"(your cable modem/router) the"other computers"(TV) will connect"through this computer."
The next screen should look like this--> http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Setup_Wizard/03_%28directly_connected%29/LAN.shtml
If you have correctly installed the USB adapter, you should see a line like the one that was highlighted in the image (it's your modem cable connection) and a second line describes your connection to the LAN USB.
If the wizard does not recognize the USB adapter as a connection to the local network, it will not let you continue (click on the 'Next' button on this screenshot, where there is only one LAN connection, and you'll see what happens).
Assuming that the wizard allows you to continue to do so. Your "computer name" is already filled in. Do not change. You can add a description if you wish. When you get to the screen 'file and printer sharing', you can disable this feature (you're not going to share files between your computer and the TV).
Confirm on the summary screen that "Internet" is through your "Local network connection" and that the wizard correctly selected your USB adapter as the "connecting to your network" (this screen shot shows that the connection to the Local network is connected to 'your network' because the Dial-Up connection is connected to the Internet)--> http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Setup_Wizard/03_%28directly_connected%29/Dial-Up/04--2.shtml (click on the scroll bar to) see the screen shot in all)
When you complete the wizard, you should be able to connect your TV to your USB adapter and it should work (Yes, there is a lot of "desirable"; good luck).
Maybe you are looking for
-
Why can I not use iOS no accessories (power supply cord) after upgrading to iOS 10
After the upgrade to iOS 10 I can't use the lightning power cord I was using before
-
ITunes opens with an empty dialog with other OK Cancel and nothing works.
How can I use iTunes with a dialog box that opens and has no response to press any key above all to close.
-
Hello I have problems with the display of a STL file in Labview. The STL file that I use is in ASCII format, but I can't view it. A part of the screen goes gray when I run the VI. You can see 3D and schema-block image display. What could be the probl
-
My Downloads folder is twice in two different places.
I have download inside my videos folder folder. Also download is already under my username where it should be. Remove extra download inside the folder folder my videos? Thank you.
-
8600n HP: Hp 8600 will only print a page on a Mac
My HP 8600 worked upward for now when it has decied that he goes; print a page of apps as the feather of the PDEf and preview. It still works with Microsoft Word. If I set it to print several pages, it will be just rpint last page. I've tried it on t