Parental control in Recovery Mode

Similar Questions

• I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.

  I have the internet Charter.  I am a home user.  I tried to set the parental control and received this message: because this computer is connected to a domain, Parental controls are not available.  Again, I am a home user.  What does that mean?

  Hello

  1. which user account you are using for Parental control (Please note that you cannot apply parental controls on a user admin account? It can be applied to standard user only accounts)?

  2 have you made changes on the computer before this problem?

  I ask through the following article to find out how to set up Parental controls:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/parental-controls

  http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

  After completing the above links persist issue please fallow the mentioned below of the methods.

  Method 1: Disable UAC (User Account Control) and check the result
  See http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-the-behavior-of-user-account-control-by-using-the-slider

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

  Important: Enable UAC after you complete the steps.

  Method 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
  See http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode  

  Hope the above information is helpful.

• Error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I am trying to set up Parental controls for the user account of my son and I get the following error: error when you try to set the Parental control 'Unable to set settings for administrators user or unknown users.

  I tried to use the administrator account.

  When I ran the System File Check sfc/scannow

  TI completed indicating certain files may be damaged and cannot be repaired and check the convertible bonds. LOG file.

  How can I know which files are corrupted.

  Any other Suggestions on how to fix this user profile?  Do I have a profile that I don't know?

  Hi wimuggss,
   
  Step 1: Disable UAC (User Account Control) and check the result
  See How can I change the behavior of user account control by using the cursor?
  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.
   
  Important: Enable UAC after you complete the steps.
   
  Step 2: If the problem persists, try to set the parental control in safe mode and check the result. If you are able to apply settings in safe mode, this means that some program is causing this problem, mainly the security software.
  See Start your computer in safe mode
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Parental controls work on safe mode?

  OK so I have to go to a site for the school and my mother will unlock for me to continue with the parental control and I keep him begging for school and she won't if parental control works on the mode safe on windows 7 because I need a little get past it if I can do what I have to do for school o : so if you can answer that would be great thank you;D

  Hi Ryan,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, you need to know the unlocking of Parental control.

  Yes, the Parental control would work in safe mode. But you must know the administrator password to access Parental control.

  Click on the link mentioned below as reference.

  http://Windows.Microsoft.com/en-in/Windows7/products/features/parental-controls

  Hope this information helps.

  Meet us if you encounter any problems with the Parental controls or any other problem of Windows and we would be happy to help you.

  Good day!

• Cancel the Parental control, because I'm the Parent: but not Administrator of my computer

  I myself blocked on my computer. I didn't know that Apple was the administrator of the computer, and I was a user. I turned on the 'enable parental control' to limit the spending of my adolescence, while using my apple ID. I didn't know I was putting controls on myself. I tried everything-

  (1) connected on Mac of my son tried to remote access, file sharing, etc. He is a Director on his computer, and we've even created a new user on his computer. Nothing has worked.

  (2) tried questions help and support, impossible to find a way around it.

  (3) I've changed my password, now I can't even shut down the computer.

  I can't believe that this happened to someone, somewhere, and it's so easy to do.

  Help, please! I tried everything-

  Please take these steps to restore the privileges on your account. This somewhat tedious procedure is only necessary if you have verified that no work administrator account exists on the system.

  If you do not already have a current backup of all your data, you must back up before taking any of the steps below. Ask if you need advice. You won't need the backup unless something goes wrong, which is always possible.

  Step 1

  Start in recovery mode. The OS X Utilities appears.

  Step 2

  This step only if you use FileVault 2. Start utility disk, then select the icon for the volume FileVault startup ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  Step 3

  Select

  Utilities ▹ Terminal

  in the menu bar. In the window that opens, type this:

  resetp

  Press the tab key. The partial order you entered will automatically end this:

  resetpassword

  Press return. Opens a window to reset the password. Select your boot if not already done volume. Pull down the menu option

  Select the user account

  and select

  Administrator (root)

  Follow the prompts to set a password. It is safer to choose a password that includes only the characters a - z, A - Z and 0-9. I suggest that you write the password. If you don't write it down and forget about it, you will start again at step 1.

  Select

   ▹ Reboot...

  in the menu bar.

  Step 4

  This step, as step 2, applies only if you use FileVault. Sign up as usual, then select

   ▹ Disconnect...

  from the menu bar or press shift-command-Q key combination. Do not restart. You go back to the login screen.

  Step 5

  On the login screen, click on the other... Enter 'root' (without the quotes) in the name field and the password set in step 3 in the password field. You should now be logged in as root. It is a potentially dangerous situation. Do nothing by being logged in as root except as indicated below. You'll be fine as long as you don't dismiss the plan.

  Open the preferences users and groups window. Select your usual administrator account from the list of users and check the box marked

  Allow the user to administer this computer

  You will be prompted to restart. Do this and log in as yourself, not as root. Your administrator status should now be restored.

  Step 6 (optional, but recommended)

  Follow the instructions in this article to support under the title "disable the root user. You must authenticate in directory utility as a 'root' with the password set in step 3. As another administrator authentication will not work.

  Credit for this idea of NCP member wessongroup.

• My child allows to bypass the parental control

  My child to bypass the parental control on his Macbook Air using the method presented in this video tutorial. Is there a way to avoid this? https://www.YouTube.com/watch?v=Br6wKR28jFo

  With the text of the video section, the way used by the author to exploit the single user Mode

  command line is specified; and it has been done before. Don't know if there are more recent methods

  to try to deter the child since the creation of their own Admin account to bypass the controls that

  those already discussed adjacent older sons, like this:

  How to stop a person setting up an administrative account duplicate (hackmac)?

  Although it is possible to learn how and use the Open Firmware password, to attempt to get the Admin acct

  This could also be overcome by a particular person looking to exploit a work around physical access.

  In the past, some computer models were easier to open and to perform tasks that could derail this method.

  Almost any iFixit or removable guide could be useful for a particular child or student, as a work-around.

  See suggestions on how to apply the Firmware password, as well as the means to

  block access to the material or the way to reset the admin by OS X Recovery password, in news

  OS X versions that use this partition and its utilities. It is part of the problem with the Admin

  operation, the user is physical access to the computer. And why remotely hacking is very difficult.

  • Use a password of the firmware on your Mac - Apple Support

  While I have no other suggestion (knowing that there could be a fairly simple method to work around the)

  and most have been published online for several years) I hope that someone will see & respond to your

  question with any method you can implement. Or see if an Apple Store genius bar can help you

  This question, because it creates problems. I'd be sure to make an appointment to discuss this at the store.

  If no official Apple retail Store is available, you should perhaps consider a call to Apple support or use a

  online chat. Don't forget to mention details about the build year computer, etc. & the version OS X in it.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider

  You can choose to make submissions directly to Apple's comments on this issue, if you find that it is not effective

  method of maintenance determined children or young adults to change their own Admin computer.

  One of the comments below links is probably more suited to this topic than the other:

  • Support Feedback

  • Products return

  Contact Apple support

  http://www.Apple.com/contact/

  Need service or support? Start your online application and we will find a solution.

  More ways to get help:

  • Contact iTunes Store support
  • U.S. iPod, Mac and iPad technical support: (800) APL - care (800-275-2273)
  • Technical support for iPhone in the United States: (800) MY-IPHONE (800-694-7466)
  • See all phone numbers around the world

  Since there is no response when I first noticed your thread, I asked guests move it more appropriate

  location for visibility in these discussions of support; so they chose to put it in the section of MacBook Air.

  Good luck in this case!

• Place the Parental control over the Admin account

  I use a Macbook Pro with El Capitan 11.1 2012

  Today, I put Parental controls on my admin account, which resulted in the managed account. I can now use my normal administrator username / combo of password to remove it. I tried everything I found on the Internet, including into single user mode and create a new account to change to leave, but the code didn't work in my case.

  I was wondering if there is any easy solution or new thoughts there for this OS...

  Also why it not easier? Or at least a warning? Looks like Apple could have come up with something after that it was produced for the years.

  Please take these steps to restore the privileges on your account. This somewhat tedious procedure is only necessary if you have verified that no work administrator account exists on the system.

  If you do not already have a current backup of all your data, you must back up before taking any of the steps below. Ask if you need advice. You won't need the backup unless something goes wrong, which is always possible.

  Step 1

  Start in recovery mode. The OS X Utilities appears.

  Step 2

  This step only if you use FileVault 2. Start utility disk, then select the icon for the volume FileVault startup ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Click the Open button in the toolbar and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  Step 3

  Select

  Utilities ▹ Terminal

  in the menu bar. In the window that opens, type this:

  resetp

  Press the tab key. The partial order you entered will automatically end this:

  resetpassword

  Press return. Opens a window to reset the password. Select your boot if not already done volume. Pull down the menu option

  Select the user account

  and select

  Administrator (root)

  Follow the prompts to set a password. It is safer to choose a password that includes only the characters a - z, A - Z and 0-9. I suggest that you write the password. If you don't write it down and forget about it, you will start again at step 1.

  Select

   ▹ Reboot...

  in the menu bar.

  Step 4

  This step, as step 2, applies only if you use FileVault. Sign up as usual, then select

   ▹ Disconnect...

  from the menu bar or press shift-command-Q key combination. Do not restart. You go back to the login screen.

  Step 5

  On the login screen, click on the other... Enter 'root' (without the quotes) in the name field and the password set in step 3 in the password field. You should now be logged in as root. It is a potentially dangerous situation. Do nothing by being logged in as root except as indicated below. You'll be fine as long as you don't dismiss the plan.

  Open the preferences users and groups window. Select your usual administrator account from the list of users and check the box marked

  Allow the user to administer this computer

  You will be prompted to restart. Do this and log in as yourself, not as root. Your administrator status should now be restored.

  Step 6 (optional, but recommended)

  Follow the instructions in this article to support under the title "disable the root user. You must authenticate in directory utility as a 'root' with the password set in step 3. As another administrator authentication will not work.

  Credit for this idea of NCP member wessongroup.

• I want to look through the history even after it gets deleted for parental control, how to proceed?

  I wonder what are the sites my daughter runs after sitting in a corner with the laptop for hours, when asked a simple answer is not available and it's the end of the conversation. I have no doubt about it, I want to know if she is simply wasting time or seriously work and to be cool, although the question is here because the story is always empty...

  Hello

  I won't say anything to try to 'spy' on your activities of girls on his device.

  If you're worried about what pages it visits and navigate too, it is easier to set up the network to run after devices in the household.

  If you chase the laptop to see the navigation history, she finds, it will change just by phone (if it has) instead and lock with pin codes and so on.
  It can also easily just be set to private Mode and avoid any local history for you to check.

  To configure the network, and the web pages that are available, you will find what your router and as an option, you may be able to use https://www.opendns.com/home-internet-security/parental-controls/

  But a better way is to focus and guide internet works and what to stay away from and so on. If it is a matter of concern.

• All the Web sites I visit every day are blocked by a virus that seems to be Mozilla (but isn't) and wants personal information in order to unlock parent control. My viru

  I tried to go to Web sites that I visit every day and they are all blocked by a virus that seems to be Mozilla (but isn't) and watch the logo of mozilla and says my site has been blocked by the parent control of Mozilla and you must sign up for this. He asks that all the personal information you give NEVER online so I knew it was a virus. I write this in safe mode. My Vipre will not pick up this virus and Malware bites either. I have deleated Mozilla and reinstalled but it did not work.

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem

  Use a type of compressed as PNG or JPG image to save the screenshot.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• First HP V13 recovery mode.

  Hello!
  Well, I need help I was playing with the buttons on my first HP. Then I press symbol (X) then. Suddenly, the screen displays the message 'First HP V13 Recovery Mode.'
  and I don't know what to do!
  I'm afraid to do anything else if I keep on pressing the buttons. Please help me

  

  Hello

  There are several ways to reset the calculator:
  
  What follows is a simple warmstart, retrieves the keyboard control, restores most of the RAM to the State in which he was stopped last, losing so eventually changes made at this session:

  • On-Symb key

  Or

  • Reset hole (back of unit)

  The following clears most of the memory, but it retains a few basic things (e.g. name of calculator, color theme, language):

  • ESC + Apps + we

  The following text always resets the calculator to new factory:

  1. Press in and hold the three keys with the letters C, F and O (non-zero).
  2. And now their all downstairs, poke a paperclip in the RESET hole in the back.
  3. When the diagnostic screen appears, release the keys C, F and O.
  4. Press 4, then 3, then enter.  He will wipe away the memory of the new plant calculator.
  5. When the blue OK is displayed, press ESC, and then 9.
  6. It usually ends with the initial installation, including hitting swiping the tiny HP logo with your finger to the right, by selecting the language by default, or other things, according to the versions of your hardware and firmware.

  Have you updated the calculator to the latest firmware?

  The latest version is currently 6030. (updates Dec 2014:6975)

  Install the connection from the CD Kit.

  Once installed the connection, update the calculator.

  The following method is recommended:

  • Connect your HP Calculator first via the supplied USB cable (connected directly, do not use a USB hub)
  • Start the HP connectivity Kit
  • Click the tab of the calculator
  • Right click on the name of the first HP you want to update (it would be that you connected before starting this procedure)
  • Write down the version number, and then click the OK button
  • Click the Help Menu and select Check for update
  • Look for the pop-up box to update, check the version number that is newer than the one you want to update.
  • Then click on the download button
  • That's it, you will see the update being loaded and installed on your calculator screen. Don't click too quickly out of the HP Connectivity Kit, wait a minute or two after the completion.
  • In addition, there are a step in the connectivity Kit where it is advisable to back up the version that you had before the procedure, just in case. This way, you have a way to cover again.

• Can not access the Recovery Mode

  Hello guys,.

  I have a very annoying problem.

  I can't enter mode recovery on my iMac 27 "late 2011, El Capitan 10.11.1.
  After pressing 'control' + 'r' at the start, the recovery mode is loading, however, when the progress bar reaches half width computer is turn off.

  When I try to access the Boot Manager ('option' button) turns on but after the selection of the recovery disc the situation in almost the same thing - is to turn off the computer.

  It is a very annoying problem because if I have problems I won't be able to fix my Mac...

  I await your response.

  If you do not already have a current backup, please backup all data, and then reinstall the OS. * you don't need to erase the boot volume, and you won't need the backup unless something is wrong. If the system has been upgraded an earlier version of Mac OS X, you may need to the Apple ID and password to use.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  If you installed the runtime Java distributed by Apple, and still need, you will need to reinstall it. It goes the same for Xcode. All other data will be preserved.

  Related support article refers to OS X 10.11 ("El Capitan"), but the procedure is the same for OS X 10.7 ("Lion") and later versions.

• Child can bypass parental controls filter time.

  My mother bought a laptop for my little brother and asked me to install the parental control for him. I activated the filter of time. However, to our surprise, my brother found a way to bypass the filter and connect to the standard user account. This is how he makes:

  1. turn on the computer.
  2 force a closed hard (by pressing the Power button for a few seconds or remove the AC adapter and the battery). He repeated this step until he gets the option launch system recovery after startup.
  3. perform a system recovery.
  4. when the computer restarts after the system recovery, there immediately connects to his account. (If it does not connect inside seconds, Family Safety let him do this.)
  It's amazing how smart kids can be on computers. He found this derivation because he chose the "recommended" system recovery I would not be a figure that out myself.
  Any suggestion on how to prevent this?
  Thank you!

  Hi R01k,

  Unfortunately, it is one of the limits of parental control. Currently, we are unable to provide assistance on this matter. You can suggest that your comments to Microsoft who considers suggestions for future versions. https://feedback.live.com

  For now, we recommend that you create another thread on the Windows 7 forum and ask for another suggestion about how to avoid that from happening.

  Here is the link where you can post your query about recovery of the system.

  Forum Windows 7

  Thank you.

• How to rehabilitate the Parental control?

  During the installation process of Windows 7, I made a mistake: I chose the domain Mode (when should I choose the user Home Mode) there are three butterflies.

  When I try to run games with side as an adult, I have can´t access.  It appears messages like 'Parental controls blocked this game' or 'you don't have permission to run the game.  Check the Parental control in the game Explorer window.

  I have no Parental controls in Control Panel.  How to rehabilitate the Parental control?  or how to rehabilitate the Home user in Windows 7 with Parental Control Mode?

  Note: I am the rights owner and the administrator of my computer.

  TododeAzul,
  Click Start > computer (right click) > properties > change
  This will give you the ability to change from a domain to a workgroup.  After that, change is effective, it should open the Parental controls for you. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Access denied: parental controls have blocked this application to run

  I downloaded a game and so far I have bought many games and I never had a problem with any of them, but this time I downloaded Family Feud 2 but when I try to open the game it gives me this message access denied: parental controls have blocked this application to run. I don't have a single account user who is the administrator account and whenever I go in there it says that I can not set the parental controls on this account, because the account administrator and if I want to create a new user account to set the parental control. So I do not know what to do in order to play this game, why I get this message and how do I get rid of him?  Thank you

  Hello
   
  Method 1:
   
  Try here with the right button on the icon of the game and choose "Run as Administrator" and see if the problem is resolved.
   
  Method 2:
   
  Follow these steps to run the game in compatibility mode.
  . Search for the executable file (familyfeud.exe)
  2. right-click on it and select Properties.
  3. click on the tab compatibility at the top of the window.
  4. check the box "run this program in compatibility for.
  "mode for".
  5. change the option in the drop-down list to Windows XP SP2.
  6. click on 'Apply' and 'Ok '.
  7. you should now be able to run the program very well.
  Method 3:
  
  You can try the steps below and check if the problem is resolved.
  Create a new user profile.
  Now you must create a new user account and check the question of do you need to follow the steps below.
  Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
  Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  Click on create a new account.
  Type the name you want to assign to the user account, click an account type, and then click on create an account.
  Now search for the question.
  IF you still face the question, then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "parental controls does not allow this game begins" without any restrictions applied

  I get the window ' parental control does not this game start "when I try to run a game and all settings are disabled.

  Hello helicopter-Guy,.

  Welcome to the Microsoft answers site.

  I would like to ask you a few questions in order to get a better understanding of this issue.

  ·         What is the operating system installed on your computer?

  ·         Did you the latest changes on the computer?

  ·         Logged in as the administrator of the computer?

  ·         What game you try play?

  You get this error usually when parental control is set by the administrator for your user account.

  I suggest that you try to run the game as administrator and check, if you are able to play the game.

  Right-click on the game, click Run as administrator.

  If the problem persists, then I suggest that you install the game in Vista compatibility mode and check if you are able to play the game.

  See the link to run programs in compatibility mode: make sure to run older programs in this version of Windows: http://windows.microsoft.com/en-us/windows-vista/Make-older-programs-run-in-this-version-of-Windows

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.