Parental controls work on safe mode?

Similar Questions

• Windows Vista works in safe mode but not in normal mode. Desktop freezes and cannot go to the Task Manager

  My laptop (Dell Inspiron; Windows Vista Home premium 32 bit) works on safe mode and safe mode with n/w mode. When I try to boot into normal mode, it comes to the screen asking my password. You can enter the password. Then, it loads the screen saver and freezes. I see a green circle turning. He never stops. I tried ctrl + alt + delete. It does not work. I did repair the system. No use. I tried the system restore. It shows a file as OS (C :) and another as recovery (x :). I chose the recovery (x :) as file control. He has worked and showed a message like system restore successfully in safe mode. But the normal mode of sill is freezing after the password screen.

  Hello

  • All changes made on your computer prior to this question?
  • You have an antivirus installed on your computer?

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after starting the computer, reinstall and run the program and see if the problem is resolved.

  Check if you have the same problem... If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.Microsoft.com/kb/331796

  To restore your computer to a Normal startup mode, follow these steps.

  1. click on start in the box start the search.

  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3. click on the general tab.

  4. click on Normal Startup - load all device drivers and services and then click OK.

  5. When you are prompted, click on restart to restart the computer.

  Also try running a Virus scan using a live care online utility.

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Microsoft.com/Security_Essentials/

  Follow the steps mentioned in the link below

  How to get rid of malware.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Let us know if this helps

  Concerning
  Anthony.

• Firefox crashes at startup, only works in safe mode

  Hello.
  As the title says, I can't start Firefox because it crashes instantly. It only works in safe mode.

  That's what I've tried so far, but it did not work:

  Restored Firefox.
  
  Reinstalled Firefox and also delete my profiles.
  
  Hardware acceleration disabled.

  These are my recent incident reports

  bp-114dcdff-7b46-425b-8ec0-478102140218
  bp-464d26b6-4530-4230-8e4f-5000e2140218
  bp-7b489bc8-20ed-4cb5-9d3a-233a02140218
  bp-6a0e5565-1f66-4606-8c29-8ac292140218

  Thanks in advance, I hope you can help me.

  Thanks for your answers, I've updated my graphics card driver, now I can use Firefox out of safe mode with disabled hardware acceleration.

  There is another problem now, Firefox crashes when I try to start with Profile Manager, I use two different profiles, so I need this feature.

  Here are two reports of incidents on the problem:

  BP-a257ee60-b8d6-495c-82a3-605572140218

  BP-2e19ad39-84c5-4BD6-B251-fcbaf2140218

  Thanks for your help and sorry for my English.

  EDIT: I had to repair my installation of windows with the installation disc, now Firefox works, thank you Tyler and cor - el for your time.

• Mouse and keyboard only work in safe mode... why?

  Or work on restoring normal operation and all the images are blurred. Said one-stop two players work under ms - back! Someone help me?

  If it works in safe mode it looks like it's the drivers. because in safe mode, it uses only basic MICROSOFT DRIVERS... go in safe mode, go to the DEVICE MANAGER (right click on computer and click on MANAGE then click on allow or continue if prompted, and then click Device Manager).

  under the heading of the keyboard device, click on the '+' and then right click and uninstall all THE items in the CATEGORY of the KEYBOARD and click OK on all messages

  then

  under mouse/mice and other input devices , click on the '+' and then right click and uninstall all THE items in the CATEGORY of the mouse/mice and other input devices and click OK on all messages.

  Then

  Reboot and allow devices to relocate

• WiFi MiniPCI card only works in "Safe Mode with network.

  AR5001Xplus MiniPCI card only works in "Safe Mode with network" (windowsXP-Home-SP2 and all updates recent).
  In 'normal' mode, it freezes my laptop after a few seconds.

  Hello

  Why you don t give us more information about your problem? We don't know what unit you have? Is the original part of card or you have built at least?

  At the moment I can just recommend you to reinstall the unit with recovery media. If the problem persists, try to install the card separately with the right driver. Otherwise, you must change the WiFi card or test it with the other.

  Give us more information.

• My Acer Aspire 4736ZG stop each time I start and will work in safe mode

  This problem has been some time now. Whenever I turn on my computer notebook (Acer Aspire 4736zg) close at boot (windows loading screen) and it really means not freeze SHUT DOWN or restarts... He likes to lose power. It only works in safe mode. Installation of Windows 7, 8 CD cannot start (stop as above).
  I did everything: fixing driver, scan virus, chkdsk, update BIOS even install new windows... The problem still there. I tried install Joli OS (Linux) to have a chance but does not work (always closed).

  All ideal for my problem?

  P/S: sorry for my English

  At this point no matter what the problem he is going to need repair. If it happens with more of an OS which pretty much eliminates the possibility of a software problem. I would still say that it is probably overheating, or there is a problem with your graphics card. However, you will need to speak with Acer on this one.

• wireless mouse does not work in safe mode. I am informed by Logitech, it is a matter of microsoft HID. What now?

  I run XP and IE. You will need to use the mouse in safe mode. normally works in normal mode.

  Logitech says it's a matter of Microsoft HID.

  It is literally true, but incomplete and very misleading.

  See http://support.microsoft.com/kb/310496

  To work around this problem, use a keyboard or a mouse, instead of a USB keyboard or mouse.

  This behavior is by design.

  In the case of USB input devices, so that they work in safe mode, the system must have a BIOS with USB support for input devices and USB legacy mode must be enabled.

  NOTE: USB devices are not loaded in safe mode, unless the manufacturer requests and provides BIOS support for the USB device in addition to input devices.

  Check your BIOS for the applicable USB settings.

• Keyboard does not work in safe mode

  Sometimes, when I have a problem the tech asked me to use mode without failure for certain tasks. But my keyboard does not work in safe mode. I am NOT using a USB - I have windows xp service pack 3. How to remedy? blondeagent99

  Sometimes, when I have a problem the tech asked me to use mode without failure for certain tasks. But my keyboard does not work in safe mode. I am NOT using a USB - I have windows xp service pack 3. How to remedy? blondeagent99

  With windows, access device mgr by right click on my computer > properties > Hardware tab > Device Manager button. Locate the keyboard in the list. Right-click on it and select the driver tab choose to uninstall the driver. Now, click on the button to update the driver. See if this will solve the problem.

  Kind regards

  Joel

  Free computer support and diagnostics-->> http://repairbotsonline.forumotion.com/

• computer only works in safe mode

  Happens to Windows Logo and crashes, does not work in safe mode have lost Admin VAC and can't do a restore
  point

  madmacca,
  We could use a little more information.

  What version of Windows and service pack level are you?
  Do you have an error message, and if yes what is it?
  Nothing changed prior to the show starting (hardware or software)?

  When you start in Safe Mode, a minimal boot and will see if this you start normally.
  Here is information on the clean boot: http://support.microsoft.com/kb/310353

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• LCD monitor only works in safe mode

  I connected a new monitor and will work in safe mode. I tried to change all the settings in safe mode but nothing seems to work when I restart the computer in normal mode. Help, please

  I'd like to see if you can install any software that came with your monitor.

  There is another option to enter in Windows Vista, choose activation lower-resolution (640 X 480)... .or the VGA mode as it used to be called.

  Try to install the drivers in safe mode if it does not work.

  If these don't work, let me know the exact model you new monitor so I can see if I can find any known issues.

  Mark <> Microsoft Partner

• keyboard and mouse on packard bell laptop only work in safe mode

  I have a packard bell easynote laptop running on windows vista, which has fine worked for two years, the other day I went to signon and not all the hits of keyboard have been recognized, after possibly connection and found loading keyboard and a mouse does not respond as completely unusable.

  -Booted safe mode and everything works fine, ran the antivirus and diagnosis-nothing found, still only works in safe mode.

  has run a restore of system-nada, still only works in safe mode

  tried an own help start-up-no, still only works in safe mode

  Please help he kills me!

  Well, I decided to bite the bullet and give it a go, after all, I know very little of these things, however I'd wait until Saturday, when I have the time to focus on it, then the word 'Register' in your response reminded me that I had bought registry cleaner Uniblue several months ago that I ran last night and hey presto problem solved! :), I'll never know if your solution would work but thanks for your help anyway and I hope that you would have had me there.

  Rich

• No network after a power failure and only works in safe mode with network. Operating system is Vista SP2.

  The latest patch to update this system was .net framework 4

  This behavior has occurred on several machines after a power failure in our factory caused all systems restart.

  I have run chkdsk

  I ran sfc

  SafeMode internet works fine.

  Clean boot does not solve the problem.

  Cannot remove .net framework 4 because I can't get windows installation service to work properly.

  X red on the connection in normal mode

  I run with the reset.cmd file subinacl to reset all the registry settings. It gave no results.

  I looked at all of the services that are running successfully in normal mode and those that are run in mode safe and that services to start. This got me internet again in normal mode, but we are far from finished there are a lot of services is still needed. I'll make one by an approach to see what will begin and what doesn't.

  System Restore was successful, but had no bearing on the issue. Here's the solution that worked.

  Safe Mode boot

  on computers that are running Windows live onecar I ran as administrator onecare removal tool

  Remove the Adobe Flash 10 utility

  Open msconfig and services.msc

  enable all services that are running in safe mode to run msconfig on the next reboot. Also enable required services for Windows updates and windows install

  Enable

  BITS, com +, Windows udpate, workstation and service server and all dependent services. If you miss some that is good because you and individual services and start them from services.msc when the next restart.

  Restart the machine.

  I found that after this reboot a few updates have been posted in the update list installed in the control panel that had not been previously listed.

  Remove all instances of Java (cannot be done in safe mode)

  Reinstall Java and flash player from their respective Web sites

  I installed Microsoft Security Essentials www.microsoft.com/security_essentials

  Run windows update and install the updates.

  run msconfig and select normal startup

  Restart and ensure normal operation.

  It takes about 1/2 hour, 1 hour per machine which was much lower than a full reinstall.

• WiFi only works in safe mode

  WiFi worked normally on my Mac Pro and then suddenly yesterday I received signal and an IP address but pages load. Other devices and computers work well with my wifi router. I can also surf the web very well when I boot in safe mode. However, when I restart my computer, then no wifi again. I can then go back into safe mode and get internet. I did no new software updates, installations or router configuration changes that may cause this problem from one day to the other. Anyone have any suggestions?

  Since then, I tried the following:

  -restart my router

  -renew the DHCP lease

  -flushed out DNS cache

  "- removed 4 files of./Library/preferences/SystemConfiguration/" then restarted computer

  -rebooted in safe mode

  -reset the SMC

  -turned off bluetooth

  -hidden "iTunes Helper" elements of opening under my user account. The only listed element.

  http://etrecheck.com/

• Disqus will not be open. Only works in safe mode

  I am running windows 7. Never had a problem with opening of Disqus on Cnn until today. Yesterday I updated avast, and no problem with disqus yesterday after the update. Today, the section of disqus on CNN opens at all in Firefox. It works fine in IE. I went through all the trouble shooting pages. The only way he opens disqus, is if I open Firefox in "safe" mode I followed the instructions and finally disabled 'everything', same avast, plugins, extensions, add-ons, etc. Even with everything turned off, including avast, it only opens disqus in safe mode. I consider my self pretty darn good on the computer, in fact, I'm the Go-to-Guy "in my circle of friends when someone computer crashes. However, I am out of options here. The only thing I have not tried is the Firefox "reset". I hesitate to do now, because by disabling all with no luck, I don't see a reset to help me.
  Thanks in advance to anyone who can help me with this.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Firefox hangs before opening, but does not work in safe mode

  Firefox start, sometimes the browser window will open, but either way it hangs completely seized of the charges. I can open it in safe mode and have tried the suggestions of "Troubleshooting extensions and themes", but it hangs still, even with all add ons and extensions disabled, after removing and reinstalling the latest version of Firefox and reset the toolbar.

  Your crashreport:
  https://crash-stats.Mozilla.com/report/index/BP-f144bda2-12d0-4a31-94f8-318662111109
  This is caused by report of Trusteer. Try to disable it and see if that stops the noise.
  You can stop the report by using the Start Menu > programs > Trusteer report > report stop
  You can ask their helpdesk when a version update of their products will be available or, if you do not need this software, uninstall.
  http://www.Trusteer.com/support/en/report-problem
  According to the user in question 892517 Trusteer is aware of the problem and working on a fix.
  See also Bug 699776 - crash of nsXPTCStubBase::QueryInterface involving a RapportTanzan7.dll in the stack.