Part of the SORT_AREA_RETAINED_SIZE of the UGA in shared server?

Similar Questions

• The assign/distribution of server processes dedicated to session SYSDBA on shared server

  Hello world

  My Oracle 11 g R2 server works on Win 8 in shared server mode. I put SHARED_SERVER = 3 and SHARED_SERVER_SESSIONS = 10 in the initialization parameter file. I don't know how these two works settings. Is anyway to set up the process server dedicated server shared for DBA session? In short, I want that on a shared server, all end users / Developer sessions use or shared server processes where the shared server process will be shared between them according to setting SHARED_SERVER_SESSIONS and also that you want to create dedicated server processes share server for session of DBA only because I want only uses session SYSDBA privileged dedicated process server rather shared server process.

  One of your post will help!

  Best regards

  Tushar Lapani

  Configuration of the database for shared server connections ALLOWS sharing of connections to the server, but does not REQUIRE it.

  It is the client process to apply the type of connection.

  Connection with a dedicated server is the default value.  If you want a shared server you have to specifically ask for it:

  In the tnsnames.ora:

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = vblnxsrv01.localdomain) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = SHARED)

  (SERVICE_NAME = orcl)

  )

  )

  In your defense, it is not very easy to find in the documentation if you don't already know what you are looking for.  Even in knowing exactly what I was looking for this answer, it took me a bit to find it, and then, it was obvious that it would be easy to see and do not understand the interest in your question.

  See http://docs.oracle.com/cd/E11882_01/network.112/e41945/concepts.htm#NETAG1036

  And your installation is not YET certified on your operating system.

• Unable to give a different port in the shared server environment

  Dear friends,
  
  
  I changed my database (oracle 11 GR 2-EE) shared server environment. I gave the dispatcher, shared_server... parameters etc. If my interlocutor is listening on port 1521 (default port), then I can connect to the database using the connection to a shared server. This connection works fine.
  
  
  
  But if change the listening port to the port by default (Say 1551), then I cann't connect to the database using the connection of shared server. But I can connect using dedicated port connection (1551).
  
  
  I gave the dispatcher parameter like below,
  
  "DISPATCHERS ="(ADDRESS = (PROTOCOL = tcp)
  (HOST = xx.xx.xx.xx) (PORT = 1551)) (DISPATCHERS = 1) »
  
  When connecting it throw error ' ORA-12523: TNS:listener did not find instance appropriate for the client connection.
  
  
  Please help me solve this problem.

  Hi user;

  His forbidden to share metalink notes instead of publication due to the policy of interoperability of. But I got same net note :) so I think I can share :)

  http://www.DBA-village.com/village/dvp_forum.OpenThread?ThreadIdA=16026

  Concerning
  HELIOS

• How to select a part of the message under macOS Sierra?

  In previous versions of Mac OS x, I was able to select a part of the message (text / iMessage) in the Messages application. Now, if I try to do the same, Tapback is enabled. It's really annoying, as I often have to copy the entire message body, paste into an editor and then to do the editing.

  Which should not happen if you simply select the text of the message by double-clicking or click-and - drag. That action works the same way it always has.

  Tapback happen if you press and hold - in other words, if do not quickly move the cursor.

  If you are still unable to work, please review your Trackpad preferences. Maybe change a setting arbitrary will correct what you are experiencing. Check accessibility > mouse and Trackpad in the same way: change a setting to determine if what it fixes.

• When using on the part of the family can they others besides Organizer individual payments?

  When using on the part of the family can others besides the Organizer make individual payments without using the card of the organizers?

  Family sharing makes it easy for up to 6 people in your family share each other iBooks, iTunes and App Store purchases without sharing accounts.

  "Pay for purchases with the same credit card families and approve kids' expenses directly from the device of a parent." And share photos, a family calendar and more to help keep everyone connected. »

  Implement the family sharing - Apple Support

• unexpected text displayed in the lower part of the browser

  Hello.
  A message began to be displayed in the lower part of the browser, please see the attachment.
  With the help of 45.0a1 (2015-11-25) Nightly 32-bit version.
  Config, I added a photo with the corresponding entries of xul.
  How can I get rid of this message?

  Thank you

  their new version 2.6.13 solves this problem apparently: https://addons.mozilla.org/firefox/addon/adblock-plus/

• There are all sorts of symbols in the upper part of the screen on different things. (Delete, answer, answer all etc)

  Thunderbird didn't work at all the other day and I had to keep going in the Task Manager to shut it down, but then he began to work the next day and it works. However, there are all these symbols covering in the upper part of the screen.

  It seems that you have a mixture of two different languages.

  Close Thunderbird.

  Back up your profile folder.

  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Profile_folder_-_Thunderbird

  Uninstall Thunderbird:
  Via 'Control Panel' or 'Settings' > 'programs and features '.
  Select Mozilla Thunderbird and click 'uninstall '.
  uninstall all instances of Mozilla Thunderbird.

  Download the language appropriate for your operating system from the link below and install it.

  • https://www.Mozilla.org/en-us/Thunderbird/all/

  Report on the results.

• When I try to send an email to multiple recipients, I get this message: "there are non-ASCII characters in the local part of the address of the recipient. This is not

  I bought a new computer. When I try to send an e-mail to multiple recipients, now, I get this message: "there are non-ASCII characters in the local part of the address of the recipient. It is not yet supported. If please change this address and try again. "I don't know what are the non-ASCII characters, so I don't know what to do. I never had this problem on my old computer. Please explain in simple language.

  The 'local' part in the context of email addresses, the part to the left of the symbol @. The warning is a bit of a surprise, because in general the owner of a mail server is relatively free to specify the address format. There is a movement to allow the games to other characters to be used in the fields, so I'm a little disappointed to see that, apparently, e-mail does not support the latter in the local part yet or it can be your SMTP server that generates this message.

  ASCII characters ("American Standard Code for Information Interchange") are, on the whole, the English alphabet, uppercase and lowercase, as well as figures, common punctuation and case of things like the asterisks, obliques and media bars, but not of accented characters. But even apparently simple things like spaces and dashes have cousins who, at first glance, appear to be identical, but are not represented in the ASCII system. I am thinking especially nonbreaking spaces, dash and half-quadratin.

  But I don't know why your new computer must have caused these warnings.

• Missing parts of the internet from firefox. Weird behavior again.

  Hello.

  I checked mozilla for solutions. Unfortunately, it's the old solution and Firefox has changed its position that the old solution is not valid.

  I see missing icons and images of my yahoo emails and a few other sites (don't remember who, but yahoo email is perfect example since it's popular e-mail service and I am sure that anyone use it may have this problem before and offer me a solution if all goes well).

  How to bring back the icons? There is nothing to with the Add-ons or hardware acceleration please (this "click on / off hardware acceleration option" is the myth).

  Thank you.

  Allowing page fonts is an important part of the process. I assume you reloaded the page after that.

  It is also possible to completely block the downloadable fonts. For example, on this page, most of the text uses the police to open San. To check if your Firefox download and use without open, you can right-click on the text, then choose inspect element (Q). The Inspector opens in the lower part of the tab. On the right side, the rule group is usually active, but you will see a fonts runs slightly to the right of that. If you click on that, it should watch without open, as in the attached screenshot.

  If your Firefox is not using downloadable fonts, please check this setting:

  (A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (B) in the search above the list box, type or paste gfx and make a pause so that the list is filtered

  C if the gfx.downloadable_fonts.enabled is in bold and "user set" false, double-click it back to true

  You can reload the page and see if that helps.

  Any improvement?

  Finally, there are some add-ons that may affect downloadable fonts. NoScript is an example. If you use NoScript, look for his drop-down/pop-up menu "blocked objects".

• Is it possible to install common lisp on the flame, as part of the kernel?

  
  

  Common lisp (e.g. Gnu common lisp) is software of the user and, therefore, is not part of the linux kernel or even a kernel module.

  You can compile ATM for ARMv7 and push it to the flame through the Bad, if you really need.

• The part of the address of the message writing window TB can cause its own adjustable frame in size as in previous versions of TB?

  In older versions of TB the part of the address of the message entry window had its own adjustable chassis. It was useful that you could develop the image to see all addresses at a time and avoid errors of sending emails to the wrong people, especially when you reply to all and to remove some addresses for example answering users in the company, excluding visitors to learn sensitive information.

  In the recent release you can only see three lines of e-mail addresses and use the scroll bar to see the rest of them, but you may miss the addresses during scrolling up/down. He needs more time to verify that the necessary addresses are there and it is not effective at all.

  Can someone restore the setting of the address in the window of writing? Is there a plan to change this in future versions?

  Please note that I use Thunderbird on Windows XP platform

  Yes! Just below the slider bar formatting changes and you can increase the size of the email address area to see more addresses.

  However, I liked the old style better which was more intuitive. Anyway, there is a way to do the job.

  Thank you very much!

• I have can´t select part of the clips in iMovie...

  Hi guys

  I m now using iMovie to edit a new project.

  There is a low, I used iMovie without problems.

  Today to import my video iPhone and try to select in the project, which is part of the clip, but automatically select the entire clip... In other works, simply place the mouse on the clip and drag to complete... Why not now?

  

  It's a feature, not a bug, that you can't drag a portion of a clip to the timeline. Hold down the R button to select a part of an element to be used in the film.  Otherwise, you will always add the full clip.

  See notes to iMovie version 10.1.2:

  

• I love Personas, but I can't figure out how to display the part of the image that can be displayed at the bottom of the window; How can I activate this part?

  Beautiful image shows the upper part of the window, where the toolbars. But the part that can be displayed at the bottom of the screen (above the taskbar (I think it's called?)) does not appear and I can't remember/find a way to work in so that it is displayed too.

  "Personas" are basically dead. The name was changed to 'Lightweight thèmes' and the Mozilla seems to have lost all interest in this feature. IMO, it is corporate ADHD - build, promote, many users ignore the hook on the feature, of it do not continue to "show the love" and in two or three years 'kick on the sidewalk.

  Basically, the add-on bar went in Fx29 - so there is no image at the bottom. There is an extension that restore the bar of the add-on, and it seems that it supports Personas - based on the screenshots on the page to download add-on.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/the-addon-bar/

• Upper part of the character is cut

  I use Firefox 26.0 on Windows 7 64 bit on both computers.

  A computer displays this: http://imgur.com/G2PfOWJ

  And the other displays this: http://imgur.com/cMSX8mn

  As you can see, the first has a transparent upper part while the second has a frequency quite unsightly. The first image was taken to a resolution of 1280 x 800 while the second was taken from resolution 1920 x 1080, so all that matters. I submit this to the second computer, so that the troubleshooting information comes from the computer showing the second image.

  Would appreciate any advice, thanks.

  False alarm, posted too quickly before letting it settle. Sorry about that, it's back to normal now.

• Cannot access the lower part of the option "file save as" in word

  If I choose the option "file save as" in the word, the bottom of the box is below the bottom of my screen and inaccessible. I tried to resize my screen and other options without result. Does anyone have any suggestions on how to fix this on a macbook pro?

  You must slide the lower part of the document itself upwards until the document is small enough so that the bottom, it is visible in the screen...