Pass UDP from a site through the vpn

I have an IPsec tunnel from site to site on the Wan to an 1841 to a 2811 router. I need a udp port for the other side, but he is not. I have the ip Protocol to the front and tried to support ip, but it does not work. I should have support on the LAN or WAN interface address? I have a phone to switch on the LAN of each subnet tries to communicate with each other.

Hello Eric,

Is your UDP unicast or multicast traffic? If it is multicast it won't work until you replace the IPSec by GRE tunnel encapsulation. You can still add security using IPSec profile on this tunnel.

Good luck.

Tags: Cisco Security

Similar Questions

Hub topology and talk: can I traffic Internet road to PC at a radius of the site through the tunnel and NAT outside in the world on the 5520 hub?

I don't know if it can be made to work or not, or if it's a mutually excluded NAT configuration that is not possible, but I have a 5520 ASA to my site central office with a fiber of 20Mbps Internet streams and two remote offices with ASA 5505 devices connected via DSL or cable modem and have finally got from Site to Site "spoke" VPN upward tunnels and run with the ability to route traffic to through a 'hairpin turn' speak-to-Spoke on the Hub Site 5520.

I have desktop PC at each remote site speaks A & B that need to communicate directly with them to support a small group of work-style of the software point of sale that is actually hosted on a remote site A PC.

PC on two remote sites must also be able to communicate with a credit card processing by the public Internet service, and I wish have the ASA 5505 units in each block of remote office as all traffic directly NAT'ed from each respective out on the local LAN PC straight Internet above each site cable modem or DSL modem. I want to force these PCs need to NAT their Internet-destination back through the ASA 5520 traffic located at the Home Office, on the VPN tunnels. In other words, I want the cable modem and DSL connections to route traffic strictly VPN encrypted to the Home Office and also behave like routers NAT for the local PC it.

I can kill the 5505 prevents NAT for PCS in remote offices simply removing the rule dynamic NAT factory default for 'everything', but then I can't understand how to get my 5520 central to perform NAT which required of the remote PCs to talk to their service of Internet credit card processor without breaking the configs "NAT-free" necessary for VPN traffic to spoke-to-spoke to work. If I'm trying to put an entry static or dynamic NAT for a remote desktop on my 5520 ASA central, it breaks the VPN tunnel so that PC specific.

Is that what I want to accomplish even possible with the ASA?

Hi Neal,

Yes, it's quite possible! below is a loss of things you need to do:

(1) make sure of course on both the 5505 s of the ASA, you send ALL traffic from the local network through the VPN.

(2) as Andrew mentioned, have the 'same-security-traffic permit intra-interface' command on the ASA 5520.

(3) you do not have to have a configured proxy server, but it is also a good solution. But to make it work without her, assuming that the ASA 5505 remote subnets 192.168.1.0/24 and 192.168.2.0/24, add the config lines below to the ASA 5520:

NAT (outside) 1 192.168.1.0 255.255.255.0

NAT (outside) 1 192.168.2.0 255.255.255.0

Global 1 interface (outside)

Please note that 1 id, and the interface can be replaced according to the configuration you already have in place in the ASA 5520.

I don't know what kind of NAT exemptions are at the origin of the questions for you, but if you can put a sanitized one of your ASA 5505 and ASA 5520 config, I can make suggestions concerning the exact configuration.

Let me know if it helps!

Thank you and best regards,

Assia

How to send all traffic through the VPN, RV082 material v3

Hello

I found this guide to send all traffic to RV042 branch to the RV082 of central office:

https://supportforums.Cisco.com/servlet/JiveServlet/downloadBody/10261-102-1-22927/Small_Business_router_tunnel_Branch_to_Main.doc

But this guide is for the material of v2. I tried and did not work, so I wonder if there are new modules for hardware v3 (firmware v4.2)

I have a RV042 brach office connected through the VPN Tunnel work to a central office RV082. I want to route all traffic

Office of brach in the RV082 from the central office.

Thank you very much

Oliver

Hi Oliver, this is called esp wildcard forwarding (full tunnel).

Here are a few useful topics

https://supportforums.Cisco.com/message/3766661

https://supportforums.Cisco.com/message/3816181

-Tom
Please mark replied messages useful

Site to Site and Site to the VPN Client

Hi all

I have installed VPN Site to Site that works very well. then set up the Site to the VPN Client, which also worked well, but the VPN Site to Site offline. If I take off after 3 lines on the Site to the Client VPN Site to Site VPN start working.

card crypto client vpn authentication list vpnuser

card crypto vpn isakmp authorization list groupauthor

card crypto vpn client configuration address respond

Here is my Config complete. Please suggest.

crypto ISAKMP policy 9

BA 3des

preshared authentication

Group 2

ISAKMP crypto key Cisco address 203.13.x.x

!

ISAKMP crypto client configuration group vpnclient

key cisco123

DNS 192.168.10.15

domain ic.com

pool ippool

!

86400 seconds, duration of life crypto ipsec security association

!

Crypto ipsec transform-set esp-3des esp-sha-hmac CISCOSET

!

Crypto-map dynamic dynmap 10

game of transformation-CISCOSET

!

!

!

card crypto client vpn authentication list vpnuser

card crypto vpn isakmp authorization list groupauthor

card crypto vpn client configuration address respond

card crypto ipsec vpn 1 isakmp

the value of 203.13.x.x peer

game of transformation-CISCOSET

match the address acl_ncsvpn

Map 10-isakmp ipsec vpn crypto dynamic dynmap

local pool IP 10.10.10.1 ippool 10.10.10.10

acl_internet extended IP access list

deny ip 192.168.0.0 0.0.255.255 10.10.10.0 0.0.0.255

deny ip 192.168.0.0 0.0.255.255 192.168.0.0 0.0.255.255

IP 192.168.0.0 allow 0.0.255.255 everything

acl_natisp1 extended IP access list

deny ip 192.168.0.0 0.0.255.255 192.168.0.0 0.0.255.255

IP 192.168.0.0 allow 0.0.255.255 everything

acl_natisp2 extended IP access list

deny ip 192.168.0.0 0.0.255.255 192.168.0.0 0.0.255.255

IP 192.168.0.0 allow 0.0.255.255 everything

acl_ncsvpn extended IP access list

IP 192.168.0.0 allow 0.0.255.255 192.168.4.0 0.0.0.255

acl_vpn extended IP access list

IP 192.168.0.0 allow 0.0.255.255 192.168.0.0 0.0.255.255

IP 192.168.0.0 allow 0.0.255.255 10.10.10.0 0.0.0.255

Please try the following command

ISAKMP crypto key Cisco address 203.13.x.x No.-xauth

and then give it a try

Since the upgrade to 2015 CC and change my site to a paid site, can my customers is more updated of the site through the browser update. When they try, parts and pieces of the site appear and they can see what it takes to update. It's about to make me los

Since the upgrade to 2015 CC and change my site to a paid site, can my customers is more updated of the site through the browser update. When they try, parts and pieces of the site appear and they can see what it takes to update. It's about to make me lose my client. Help, please.

We have identified two questions:

(1) muse implements a markup bad comment, causing in the edition (IBE) browser to display the page properly. Only, this affects IBE and does not affect the published site. The combination of page that causes the bad markup is still TBD.

(2) IBE does not account for the bad markup that leads to incorrect DOM, leaving IBE unusable.

We have a fix for IBE (as BC) who is ready to be tested. We will update this thread when the fix is on.

Sorry for the inconvenience.

Jason San Jose

Is there a way to copy / transfer / export existing assets from one site to the other?

Is there a way to copy / transfer / export existing assets from one site to the other?
I have like 20 + documents in one of my sites that I need to transfer to another site... What is a quick way to do without re - upload all my new Web site?

Anyway, you would still re - download.

If they are both sites of Muse you can open sites in Muse and copy and paste the desired content moved above.

Configure the Cisco VPN client to pass through the VPN site-to-site (GUI)

Hello

I say hat the chain and responses I've seen to achieve this goal have been great...

https://supportforums.Cisco.com/discussion/12234631/Cisco-ASA-5505-VPN-p...

and

https://supportforums.Cisco.com/document/12191196/AnyConnect-client-site...

My question is "we will get this configuration by using the graphical user interface for someone who is not notified about the command line?"

Thank you

Of course, all this can be configured via ASDM.

Looking at the second example you posted above, they point you first change:

ACL split of the tunnel for the AnyConnect customer

This Configuration > remote access VPN > network (Client) access > AnyConnect connection profile > (chose the profile and select Edit) > (choose "Manage" next to group policy) > Edit > advanced > Split Tunneling > ensure that the policy does not "Inherit" but rather "Tunnel network list below" > Unselect "Inherit" next to the network list, then 'manage '. Enter your networks you want in the GUI in this dialog box. Click OK all the way back to the main window ASDM and click on apply.

You then change:

Crypto ACL for the tunnel from Site to Site

To do this, go to Configuration > VPN Site-to_site > connection profiles > (choose your profile and select edit) > add the VPN client address pool to the list of local network between protect networks. Yet once, click OK all the way back to the main window ASDM and click on apply.

Then, allow the

ASA to redirect back on the same interface traffic it receives

.. is defined under Configuration > Device Setup > Interfaces. (check the box at the bottom of this screen). Click on apply

Finally, there is the NAT exemption. For which go to Configuration > firewall > rules NAT. Add a NAT device rule before rules network object with Interface Source out, Source address your address pool VPN, the Destination address to include remote subnets and Action is Static Source NAT type source address and destination address remaining as original (i.e. without NAT). Once on OK all the way back to the main window ASDM and click on apply. Save and test.

Good luck. Don't forget to note the brand and posts useful when your question is answered.

Impossible to pass traffic through the VPN tunnel

I have an ASA 5505 9.1 running. I have the VPN tunnel connection, but I am not able to pass traffic. through the tunnel. Ping through the internet works fine.

Here is my config

LN-BLF-ASA5505 > en
Password: *.
ASA5505-BLF-LN # sho run
: Saved
:
: Serial number: JMX1216Z0SM
: Material: ASA5505, 256 MB RAM, 500 MHz Geode Processor
:
ASA 5,0000 Version 21
!
LN-BLF-ASA5505 hostname
domain lopeznegrete.com
activate the password
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.116.254 255.255.255.0
OSPF cost 10
!
interface Vlan2
nameif outside
security-level 0
IP 50.201.218.69 255.255.255.224
OSPF cost 10
!
boot system Disk0: / asa915-21 - k8.bin
passive FTP mode
DNS server-group DefaultDNS
domain lopeznegrete.com
network obj_any object
subnet 0.0.0.0 0.0.0.0
the LNC_Local_TX_Nets object-group network
Description of internal networks Negrete Lopez (Texas)
object-network 192.168.1.0 255.255.255.0
object-network 192.168.2.0 255.255.255.0
object-network 192.168.3.0 255.255.255.0
object-network 192.168.4.0 255.255.255.0
object-network 192.168.5.0 255.255.255.0
object-network 192.168.51.0 255.255.255.0
object-network 192.168.55.0 255.255.255.0
object-network 192.168.52.0 255.255.255.0
object-network 192.168.20.0 255.255.255.0
object-network 192.168.56.0 255.255.255.0
object-network 192.168.59.0 255.255.255.0
object-network 10.111.14.0 255.255.255.0
object-network 10.111.19.0 255.255.255.0
the LNC_Blueleaf_Nets object-group network
object-network 192.168.116.0 255.255.255.0
access outside the permitted scope icmp any4 any4 list
extended outdoor access allowed icmp a whole list
outside_1_cryptomap list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
inside_nat0_outbound list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
LNC_BLF_HOU_VPN list extended access permitted ip object-group LNC_Blueleaf_Nets-group of objects LNC_Local_TX_Nets
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 741.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
outside access-group in external interface
!
router ospf 1
255.255.255.255 network 192.168.116.254 area 0
Journal-adj-changes
default-information originate always
!
Route outside 0.0.0.0 0.0.0.0 50.201.218.94 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
AAA authentication enable LOCAL console
Enable http server
http 192.168.2.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec pmtu aging infinite - the security association
card crypto outside_map 1 match address outside_1_cryptomap
peer set card crypto outside_map 1 50.201.218.93
card crypto outside_map 1 set transform-set ESP-3DES-SHA ikev1
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
no use of validation
Configure CRL
trustpool crypto ca policy
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit smoking
crypto isakmp identity address
Crypto isakmp nat-traversal 1500
Crypto ikev1 allow outside
IKEv1 crypto policy 10
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
IKEv1 crypto policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH 0.0.0.0 0.0.0.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
SSH version 2
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management-access inside

a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
attributes of Group Policy DfltGrpPolicy
Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client
username
username
tunnel-group 50.201.218.93 type ipsec-l2l
IPSec-attributes tunnel-group 50.201.218.93
IKEv1 pre-shared-key *.
NOCHECK Peer-id-validate
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
call-home service
anonymous reporting remote call
call-home
contact-email-addr [email protected] / * /
Profile of CiscoTAC-1
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:e519f212867755f697101394f40d9ed7
: end
LN-BLF-ASA5505 #.

Assuming that you have an active IPSEC security association (i.e. "show crypto ipsec his" shows the tunnel is up), please perform a packet trace to see why it's a failure:
```
 packet-tracer input inside tcp 192.168.116.1 1025 192.168.1.1 80 detail
```
(simulating a hypothetical customer of blue LNC tries to navigate to a hypothetical LNC TX Local site server)

Send all traffic through the vpn tunnel

Does anyone know how to send all traffic through the tunnel vpn on both sides? I have a server EZVpn on one side and one EZVpn client on the other. I'm not natting on each side. I use the value default 'tunnelall' for the attributes of group policy. On the client side all traffic, even if not intended for the subnet of the side server, seems to pass through the tunnel. But if I ping the side server, the same rules don't seem to apply. Traffic destined for rates aside customer through the tunnel, but the traffic that is not pumped on the external interface in the clear. That's not cool.

Hello

Clinet traffic to server through tunnel, that's right, right?

Traffic from server to client through tunnel, but the rest of the traffic is not, no?

This works as expected because in ezvpn, politics of "tunnel all ' is for traffic is coming from the client., do not leave the server.

Side server, customer traffic will pass through tunnel, the rest used.

Sian

No traffic through the VPN tunnel but at the same time

Hey everybody,

Good enough at the end of my VPN configuration but I have a question. The VPN connection is established and the remote computer can set up a VPN with my router (phases 1 and 2 are ok) but I can't ping all devices on both sides. I think it might be something about the acl. I created an acl that I linked with my group of vpn, what should I do something with the card?

Here is the configuration of the router

AAA new-model

!

!

local AuthentVPN AAA authentication login

local AuthorizVPN AAA authorization network

!

AAA - the id of the joint session

clock timezone GMT 1 0

clock summer-time recurring GMT

!

IP cef

!

DHCP excluded-address IP 192.168.0.1 192.168.0.99

!

Authenticated MultiLink bundle-name Panel

!

VPDN enable

!

VPDN-group MyGroup

!

!

model virtual Network1

!

username admin privilege 15 secret 4 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

!

redundancy

!

crypto ISAKMP policy 1

BA aes 256

preshared authentication

Group 2

life 3600

!

ISAKMP crypto client configuration group myVPN

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx key

DNS 192.168.0.254

pool IPPoolVPN

ACL 100

!

!

Crypto ipsec transform-set esp - aes esp-sha-hmac T1

tunnel mode

!

!

!

crypto dynamic-map 10 DynMap

game of transformation-T1

market arriere-route

!

!

list of authentication of crypto client myMap AuthentVPN map

card crypto myMap AuthorizVPN isakmp authorization list

client configuration address map myMap crypto answer

card crypto myMap 100-isakmp dynamic ipsec DynMap

!

the Embedded-Service-Engine0/0 interface

no ip address

Shutdown

!

interface GigabitEthernet0/0

no ip address

automatic duplex

automatic speed

PPPoE enable global group

PPPoE-client dial-pool-number 1

No mop enabled

!

interface GigabitEthernet0/1

LAN description

no ip address

automatic duplex

automatic speed

No mop enabled

!

interface GigabitEthernet0/1.1

LAN description

encapsulation dot1Q 1 native

IP 192.168.0.254 255.255.255.0

IP nat inside

IP virtual-reassembly in

IP tcp adjust-mss 1452

!

interface Dialer1

MTU 1492

the negotiated IP address

IP access-group RESTRICT_ENTRY_INTERNET in

NAT outside IP

IP virtual-reassembly in

encapsulation ppp

Dialer pool 1

Dialer-Group 1

PPP authentication pap callin

PPP chap hostname xxxx

PPP chap password 0 xxxx

PPP pap sent-name of user password xxxxx xxxx 0

crypto myMap map

!

IP pool local IPPoolVPN 192.168.10.0 192.168.10.100

IP forward-Protocol ND

!

IP http server

23 class IP http access

local IP http authentication

IP http secure server

IP http timeout policy slowed down 60 life 86400 request 10000

!

The dns server IP

IP dns primary GVA. SOA INTRA NS. GUAM INTRA [email protected] / * / 21600 900 7776000 86400

IP nat inside source list 10 interface Dialer1 overload

overload of IP nat inside source list 11 interface Dialer1

overload of IP nat inside source list 20 interface Dialer1

overload of IP nat inside source list 30 interface Dialer1

overload of IP nat inside source list 110 interface Dialer1

IP route 0.0.0.0 0.0.0.0 Dialer1

Route IP 192.168.0.0 255.255.255.0 GigabitEthernet0/1.1

IP route 192.168.1.0 255.255.255.0 GigabitEthernet0/1.2

!

RESTRICT_ENTRY_INTERNET extended IP access list

TCP refuse any any eq telnet

TCP refuse any any eq 22

TCP refuse any any eq www

TCP refuse any any eq 443

TCP refuse any any eq field

allow udp any any eq 50

allow an ip

!

Dialer-list 1 ip protocol allow

!

!

SNMP - server RO G community

public RO SNMP-server community

entity-sensor threshold traps SNMP-server enable

access-list 10 permit 192.168.0.0 0.0.0.255

access-list 11 permit 192.168.1.0 0.0.0.255

access-list 20 allow 192.168.2.0 0.0.0.255

access-list 30 allow 192.168.3.0 0.0.0.255

access-list 100 permit ip 0.0.0.0 0.0.0.255 192.168.0.0 0.0.0.255

access-list 110 deny ip 192.168.0.0 0.0.0.255 192.168.10.0 0.0.0.255

access ip-list 110 permit a whole

I don't know if it useful, but here is the view the crypto ipsec command his:

Interface: Dialer1

Tag crypto map: myMap, local addr 213.3.1.13

protégé of the vrf: (none)

local ident (addr, mask, prot, port): (0.0.0.0/0.0.0.0/0/0)

Remote ident (addr, mask, prot, port): (192.168.10.12/255.255.255.255/0/0)

current_peer 109.164.161.35 port 49170

LICENCE, flags is {}

#pkts program: 5, #pkts encrypt: 5, #pkts digest: 5

#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0

compressed #pkts: 0, unzipped #pkts: 0

#pkts uncompressed: 0, #pkts compr. has failed: 0

#pkts not unpacked: 0, #pkts decompress failed: 0

Errors #send 0, #recv 0 errors

local crypto endpt. : 213.3.1.13, remote Start crypto. : 109.164.161.35

Path mtu 1492 mtu 1492 ip, ip mtu BID Dialer1

current outbound SPI: 0x54631F8B (1415782283)

PFS (Y/N): N, Diffie-Hellman group: no

SAS of the esp on arrival:

SPI: 0x8C432353 (2353210195)

transform: aes - esp esp-sha-hmac.

running parameters = {Tunnel UDP-program}

Conn ID: 2033, flow_id: VPN:33 on board, sibling_flags 80000040, crypto card: myMap

calendar of his: service life remaining (k/s) key: (4212355/1423)

Size IV: 16 bytes

support for replay detection: Y

Status: ACTIVE (ACTIVE)

the arrival ah sas:

SAS of the CFP on arrival:

outgoing esp sas:

SPI: 0x54631F8B (1415782283)

transform: aes - esp esp-sha-hmac.

running parameters = {Tunnel UDP-program}

Conn ID: 2034, flow_id: VPN:34 on board, sibling_flags 80000040, crypto card: myMap

calendar of his: service life remaining (k/s) key: (4212354/1423)

Size IV: 16 bytes

support for replay detection: Y

Status: ACTIVE (ACTIVE)

outgoing ah sas:

outgoing CFP sas:

And on the side of the customer, when I go to the status of--> statistics, all packages have been circumvented, nobody is encrypted

Thanks for your help!

Sylvain,

Let me explain again:

IP nat inside source list 10 interface Dialer1 overload

overload of IP nat inside source list 110 interface Dialer1

Here you are from two ACL, but they are the same with the difference, that NAT 10 110 also but WITHOUT user VPN and everything inside. Problem is that 10 matches first, if the connection will not work. You can disable entry NAT with 10 110 because that will also:

no nat ip inside the source list 10 interface Dialer1 overload

That should be enough.

Michael

Please note all useful posts

I am trying to export information from one site to the other; i.e. doba products to sell on ebay. I get an error telling me to "set associations"?

I'm trying to export information from one site to another, i.e. the products to sell from doba to ebay. I get an error telling me to "set associations"?

Looks like a command prompt to set the default program for opening a certain type of file.

This can be done in two contexts > Apps or right click on the Start button to open the Control Panel, choose the command display by: icons, then default programs.

How to block a Web site through the firewall of windows 7 ultimate 64-bit

I tried to block a Web site, but I found never this kind of option in the windows firewall... the picture is the same in avast internet security which I use also... I don't want some websites to access it on my computer... Please help me solve the problem.

Hi ramakrishna91,

1. don't want to block certain websites?

You will not be able to block the Web site access by using the Windows Firewall, but you can use Internet explorer to access the Web sites by adding these sites in sensitive sites.

(a) click the Start button, select Control Panel, type Internet options in the search box, and then click Internet Options.

(b) click on the Security tab, click restricted sites , and then click Sites.

(c) to add a site, type the URL in the Add this Web site to the zone box, and then click Add.

Why can't open or copy files from the web?

http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-open-or-copy-files-from-the-Web

I hope this helps!

Halima S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

No sound from my laptop through the helmet

I had this problem for a long period of time, but since I discovered this view as an opportunity because I've seen similar questions and comments of the people who reported the issue, so am sure also that I already got the answer.

My question is why is that my laptop does not produce a sound with headphones, but the speakers work, I tried to open the playback device and right click just below that tab and nothing has appeared as helmet but only speakers were displayed.

I will be grateful for your positive response to this problem.

Thank you

walulumba samuel

Hi Walulumba Samuel,

First of all, thank you thank for trying to solve the problem by doing research with the resources you have.

This might have caused due to hardware or driver related issues. I would like to know some information about this problem so that we can help you further.

1. What is the number of brand and model of the computer/headphones?

2 is it limited to any specific headphones or with the headphones?

3. do you get any error code or error message when you connect the headphones?

4. have you made changes on the computer before this problem?

As a first step, I suggest you try to connect a different headset and check if you are able to hear the sound or not.

I would suggest trying the following methods and check if it works for you.

Method 1:

Run the audio Troubleshooter and check if you are able to hear the sound of the headset. This is to check if the problem is due to problems related to settings or not.

Follow the steps to run the Troubleshooter:
1. Press Windows key + Q on your keyboard to move to the search option.
2. Troubleshooting type, and then click Troubleshooting.
3. Just type read audio data in the Search option.
4. Click on play audio convenience store and follow the instructions to run the troubleshooter.
Method 2:

Try installing the latest drivers including the chipset drivers from the Web site of the manufacturer of the computer or from Windows Update and check if the problem persists. This is to check if the problem is caused because of driver related issue or not.

See the following Microsoft Help article to update the drivers.

http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

You can also see the following article from Microsoft Help for more information with related issues sound.

http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

Please reply with the status of the issue so that we can better help you.

I can't download a PDF on my MAC from a site of the Government of the Canada

I have trouble downloading a PDF from a site Canadian Government (I'm on MAC) despite having installed the latest version of Adobe reader. Any ideas?

Well, the issue is complicated, but the simple solution.

Just ignore the message and download the file in the usual way, save it to your desktop, as if it was what you wanted.

Then, open the file from your desktop, in Adobe Reader.

How can I pass values from one node to the other

Give a standard and efficient way to pass values of the child to the parent

Hai Prathap

You can use the custom event to pass values from the children to the parent

Pass UDP from a site through the vpn

Similar Questions

Maybe you are looking for