Password and connection to the JRun Management Console

Similar Questions

• Problems of peripheral connection to the Desktop Manager and Apploader.exe blackBerry Smartphones

  Just got a new BB8900 last Friday. On Monday, I met a Reload software: 552 error code and after checking online forums for options on how to fix I finally had to reinstall the operating system and reinstall the new applications, which are not checked by the resettlement process. Because I was afraid to become again this error when I rebooted the machine, I immediately made backups every hour I was reconfigure the device and adding my apps.

  Today I was going to do another backup for good measure, and once I have connected my Blackberry to the computer with Desktop Manager running, Desktop Manager crashed and gave me the following error message:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: DesktopMgr.exe
  Application version: 5.0.0.11
  Application timestamp: 4a4bd539
  Fault Module name: DesktopMgr.exe
  Fault Module Version: 5.0.0.11
  Timestamp of Module error: 4a4bd539
  Exception code: c0000005
  Exception offset: 000d68f5
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: c4a7
  More information 2: 473b2e845affd1758ca8e66121386d63
  3 more information: 83e8
  Additional information 4: 72466a8a5092651f7fe609f9ec3f3489

  I then tried the APPLOADER. EXE program location in program files/common files/research in motion/apploader. I had used this program yesterday to try to remove applications 1 by 1 with the hope that a single request was causing the error 552. Now for some reason any program as a problem to note the following in the error log file:

  Read 1010fffc location caused an access violation.

  I've looked through several forums and have not found a solution. What I can tell you is the following:

  (1) the phone works well, but I'm afraid by restarting the phone and another 552 error (there were two deleted apps that will be entirely deleted on reboot). Hope everything is fine but I got two of these 552 errors within 24 and the second came without any warning. If I get this error there is no way to make my backup since I can't connect to DM without it crashing.

  (2) it doesn't seem to be a timing issue, but I deleted the Intellisync folder anyway and it does not solve the problem.

  (3) have rebooted my machine without change to the problem.

  (4) have reinstalled DM Version 5 (this time without Roxio Media software) without change to the problem.

  (5) because now I get an error when connecting to DM and trying to run apploader.exe, there seems to be a setting on my phone which may cause problems (I don't know what it can be, but the APPLOADER program finds a violation of place then maybe the Blackberry software is confused about where to find my Apps?)

  (6) the BlackBerry Device Manager works fine and takes note of my device and the serial number it is necessary.

  After my last backup yesterday I probably only installed 3-4 other apps that I had lost and organized/moved files on the phone. So get this problem if shortly after that everything worked fine is staggering.

  Another update: it seemed to me I found the problem.  While RIM support recommended I do a reset, I pushed the rest of the phone feature seems to work very well.  I opted to start removing the one phone applications and then try to connect to the Desktop Manager.

  Once I removed the ZDNet Tech News For the IT professional and rebooted the phone, I was able to connect and make a backup. I'm sure this app works very well for almost everyone, but for some reason (maybe it is in conflict with another application on my phone), Desktop Manager does not do that and close. Initially, I reinstalled again and was able to make a new backup but an hour later Desktop Manager stops again (perhaps by doing an update on the news it creates a conflict with the Desktop Manager).

  Indeed summary of learning since my problem seems to be quite uniqueCurve 8900)

  (1) if the Director of bureau stops and you have tried other solutions on the forums such as deleting the folder Intellisync and reinstalling Desktop Manager, try to remove applications 1 by 1 and restart the phone before trying to connect again to Desktop Manager.

  (2) If you have had this problem, frequently make backups and keep track of what you add to your phone in case there is a problem you know the latest apps to remove (in my case, I couldn't go to my last backup since DM would be closed with the conflict of the app).

  (3) only consider a wipe of the device if you have exhausted your apps withdrawal tests.  Apps that came on your phone which notes the seller in the section about the application that RIM should be good.  Also while on AppWorld apps are offered by BlackBerry, there is no certainty that they will work on your phone.

• Enter the valid user name and password to connect in the workspace

  Dear reader,
  
  We are working on system 9.2.0, the problem that we face are as connect us to the workspace we get an error "Please ENTER THE VALID USERNAME AND PASSWORD TO CONNECT to THE SYSTEM"; and at a time where we access studio EN an another error message that says "COULD NOT CONNECT to GSM SERVER HYPERION: 1800", we have installed Hyperion BI/UI in the same folder and configured with the same repository, each service is correctly installed and configured in shared services, we are able to view the node BI + and we also tried configure the SSP and BI/AC two or three times. Please suggest the solution for the same thing.

  Hi Vikram,

  Check if your EN service is started and your database is running.

  Kind regards

• How to install the Microsoft Management Console?

  Hello

  I have a Satellite (S1800-412) with Win XP.
  Now I need to install the Microsoft Management Console on, but I have not possibility, because I have only Toshiba CD-ROM product recovery.

  to install the Microsoft Management Console, I should have the XP installation CD, but I did not.
  So my question is:
  What can I do with Toshiba CD-ROM product recovery to install on my satellite Microsoft Management Console?

  I'm trying to understand the policy of Microsoft and Toshiba, but it doesn't look good when I spend much for the XP system and I don't have the cd it wit.

  How can I solve my problem?

  I need to get an answer as soon as POSSIBLE!

  Concerning

  Stan

  Haha! It's easy:

  1. click on run.
  2. type in mmc.exe
  3. press enter
  4. There you are

  :)

  Where is my reward? (:)

• What are the tasks we can perform by using Component Services in the Microsoft Management Console?

  Original title: use MMC

  Can someone enlighten me on component services, found in the administrative tools, including the management console folder. Is their anything that can be done by someone who has no knowledge on this subject, extensive Windows, I use XP (SP3) thank you.

  Hi ratchet.

  Microsoft Management Console (MMC) lets system administrators create much more flexible user interfaces and customize administration tools.

  See this link for the tasks that we can perform using Component Services in the Microsoft Management console.

  With Component Services, administrators can deploy and administer service applications of components through a graphical user interface or automate administrative tasks using a programming or scripting language. Software developers can use Component Services to visually configure routine component and behavior of the application, such as security and participation in transactions, and to integrate components into Component Services applications.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_start_mmc.mspx?mfr=true

  Also check out this link:

  Using the Microsoft Management Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_start_mmc.mspx?mfr=true

• The operation did not complete because the disk management console view is not updated.

  Disk title management error: Windows 7 original by adding a drive letter
  Well, I don't know why this is happening, but if I try to add a disk to my windows system, it will not automatically add a drive letter, but it will add a drive letter to my USB and USB external drives without problem. It's just when I plug it in sata he's going all wobbly. I see the HARD internal disk in disk as a disk, but windows disk management Refuses anyway shape to add a drive letter, even with diskpart automount enabled. This is the error I get when I try:

  "The operation failed to complete because the disk management console view is not updated. Refresh the view by using the refresh task. If the problem persists close the disk management console, then restart disk management or restart the computer. »

  Absolutely nothing works. I tried Diskpart, acronis, AOMEI, EausUS, chkdsk, sfc/scannow, Microsoft fixit. Nothing works to get the drive Manager to add a drive letter to an internal HARD disk. Like I said, sticks and USB drives are no problem. I looked all over Google and I have not seen one solution to this problem short of a total erase and start again, and at this point, I'm not be done with everything I installed and might have to reinstall.

  I have other systems that do not have this problem. Just this one windows 7 install x 64. Can anyone shed some light on why this happens and how to fix it or if there is even a fix for it.

  Thank you

  Methadras

  Just to follow and finish this, the old MAIN drive has had some problems and was

  continues to worsen, it ends up by crashed.  scannow revealed some Windows system

  Files were corrupted and could not be repaired.  After the crash, I used the blank hard disc 500 gig

  and did a restore of the system since the disks created with the purchase and restored the system to

  "DAY 1".   Yes all the data and installed programs are missing, but I reinstalled my software.

  Adding external or internal disks worked without any problem now.

  I created a Windows 7/64 system repair disc.

  I created an Image of the system.

  I have a backup plan.

  I do the scheduled backup.

  I learned a lesson...

  Joe_T45

• View of the Disk Management Console is not updated.

  I use win 7.
  I tried to change the size of the disk by using the magic of the partion and it failed. He asked me about a wrong address, and I click on continue (I guess he's changed the logical address).
  Now I can't see my partion (D) to the workstation.
  When I run windows disk management and try to change the drive letter, it is said: "the operation failed to complete because the disk management console view is not updated. Refresh the gwendoline by using the refresh task. If the problem persists close the disk management console, then restart disk management or restart the computer. »
  I tried with windows Diskpart to mount the partition but I can't. If I have the volume list, it shows me only (C), but if I list the partition, then it shows me all the 3 partition:
  Partion 1: OEM
  Partion 2: primary
  Partion 3: primary
  but I can't access partition 3.

  Hello faithful,.

  Have you tried to use other third-party programs to "manipulate" the discs?  It seems that even if Palcouk $ million question with is it compatible, so I shot to the top of Partition Magic site and see the this PM 8 is not compatible with Windows 7.  I would try to see if you can access the partition from the command prompt, but I promise that would work.  Have you created a backup of your data before you do?

  I would say go to the link below and post a question with the community to see if you have viable options to recover from this.

  PartitionMagic 8.0 system requirements

  http://Service1.Symantec.com/support/PowerQuest.nsf/docid/2004050716123662?open&docid=2004050712232662&NSF=PowerQuest.nsf&view=6c360f88152ecfce88256e91005066ac

• Hide the username / password when connecting to the database

  I need to find a way to hide the user name / password when connecting to the database (via a script), or by encryption or any other method that hides this information when I connect to the database.

  I use Oracle 11 g.

  I tried with the portfolio method, but could not connect to the database of the error below, even the user name and password:

  ERROR:

  ORA-01017: invalid username / password; connection refused

  I plugged this way (after the cover configuration):

  sqlplus /@DB

  Please help me.

  Concerning

  Luiza

  Hi Luiza,

  Try to find out why the portfolio method does not work, check the implementation using ref 340559.1 Note

  Check also for example client and server versions / compatibility, evolves sec_case_sensitive_logon relevant parameter (as a test, because it must be true) etc.

  Greetings,

  Damage ten Monkshood

• Unable to connect to the vShield Manager

  Hello

  I have deployed just a test "vCloud Director camera 1.5" and in the "Attach new vCenter ' Assistant in the vCloud Director 1.5 portal, I was able to attach my vCenter fine credentials, but when he asked"vShield Connection Manager"I grabbed both FQDN or the IP address of the unit vShield Manager user/pass appropriate but still didn't work but gave an error"unable to connect to the vShield Manager. "

  I double check my two vSM01 DNS entries and vCD01 servers are looking backward/forward very well.  My IP model using base 192.168.1.xx without firewall or VLANS between the two, if someone has problems with that please advice.

  Thanks in advance!

  Works very well here. But I recommend certainly triple check DNS, as it is the thing that most often cause these problems.

• Just installed a vigin superhub my portable computer that has a network adapter and connected to the hub, but I get the message cannot connect without certificate

  wireless problem

  just installed a vigin superhub my portable computer that has a network adapter and connected to the hub, but I get the message cannot connect without a certificate, any siggestions would be welcome

  Tom

  Hello, Bill Bates,.

  I would say to contact support with their router blank:
  https://help.virginmedia.com/system/selfservice.controller?configuration=1002&PARTITION_ID=1&TIMEZONE_OFFSET=&usertype=1&VM_CUSTOMER_TYPE=&cmd=ESCALATION_REQUEST

• How can I add my laptop to the network and connect to the internet as well

  I have internet access on my computer at home, the ipod, the ipad and iphone.  How can I add my laptop to the network and connect to the internet as well?

  Hello

  I suggest you to refer to the following Microsoft article and check if it helps.

  Add a device or computer to a network:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-device-or-computer-to-a-network

  For more information, see the following Microsoft article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-you-need-to-set-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows/explore/home-networking

  Hope the information is useful.

• Enter password administration or power password and I fill the collar

  Hello, my laptop is not turning as it allows.
  When I turn it on it seems to enter administration or power password password and I fill the collar...
  So it appears "Press esc" on the bottom left...
  And then it seems 5choice: f1, f2, f8, f9, f10...
  But if I fill the wrong password, it seems, copy the following code: 56851221

  Please help me, because I need my phone back as if it were. :'(

  Hello

  Please try:

  49739807

  Kind regards.

• [Win7] How routing metric is determined when wired and connected to the same subnet and enabled both wireless adapter

  We have one under the Network Setup:

  1 Win 7 laptop with the wireless and wired adatper1 card1 enabled and connected to the 192.168.1.0 network.

  WLA1 - 192.168.1.2

  WA1 - 192.168.1.3

  2 Win 7 laptop with the wireless and wired adatper2 card2 enabled and connected to the 192.168.1.0 network.

  WLA2 - 192.168.1.4

  WA2 - 192.168.1.5

  WLA1 and WLA2 are connected by a wireless access point.

  WA1 and WA2 are connected via L2 switch.

  Every time we ping from laptop1 to 192.168.1.4, need the wireless path.

  Similarly, when we ping from laptop1 to 192.168.1.5 only need to access wired road.

  In addition, if we disable WLA1 in laptop1 and laptop1 192.168.1.4 ping, ping does not occur and ping is successful only if the wireless network adapter is enabled. It does not take the cable path.

  I just sub questions:

  -On what basis the route is chosen correctly?

  -Can we expect this happens all the time or roads can vary according to certain parameters?

  -Why it only takes the path wired when we ping from laptop1 to 192.168.1.4 after having turned off the WLA1.

  RB

  You will get a more definitive answer on metrics on Technet

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Get 'no scanners were detected. If a scanner is installed, make sure that it is turned on and connected to the computer and try again. "

  Original title: Windows Fax & Scan

  Hello, I just bought a new printer (Canon MG2450), and every time I try to scan something an error comes out.

  The error that says:

  No scanners were detected. If a scanner is installed, make sure that it is turned on and connected to the computer and try again. For more information about adding or troubleshooting scanners, see Help and Support.

  the printer is powered on and connected. I tried searching the Internet and I tried the TWAIN_32 and everything is good.

  What can I do?

  Daniel Capelle

  The scanner came with a CD to install the software?  Some more recent does not come with a CD, you must go to the Canon Website and you get the software.

• I disconnected from the home group, but when I try to join the homegroup I can't because I put a password and I forgot the password. What should I do?

  Hello. I disconnected from the home group, but when I try to join the homegroup I can't because I put a password and I forgot the password. What should I do? TQ

  Hello. I disconnected from the home group, but when I try to join the homegroup I can't because I put a password and I forgot the password. What should I do? TQ

  Where can I find my homegroup password?