password not accepted after that laptop wakes from sleep

Similar Questions

• IdeaPad Y530: windows does not start after that laptop went to sleep mode.

  Hello

  More great frustration in my life have laptop brand new, this for me.

  After that the laptop goes into mode 'sleep', I'm not able to go back to Windows. All light are there and watch as usual, but there is no Lenovo Welcome logo or any other sign of normal behavior. I can turn it off by holding the button market / stop, but when I turn back the problem is still there. Windows does not start.

  I was able to go back to Windows that day after leaving just laptop without any power and battery.

  I called Lenovo and they suggested to disable the standby modes use put into hibernation. I did it. When the screen saver started, something went wrong, computer got froze and I had to restart, but then again, black screen and no reaction.

  Anyone have any ideas?

  Thanks for the reply.

  That's what I end up doing. OnKeyrecover does not work either so what spoke on the phone with Lenovo. Then he is gone now for repair.

• Fallout 3 stops working after the computer wakes from sleep

  Since the games for Windows Live 3 is out, Fallout 3 has never been the same. He used to work at best my GfWL and now her nightmare. Recently, after that I quit the game and put my computer to sleep, Fallout 3 will stop working completely after wake up. I try to start it and I get them all is a cursor with a small blue rotating light. What is even more strange, is that my computer goes into a State of semi who no longer meet this point where programs and keyboard shortcuts no longer work, but I can browse my hard drive. I try control + SHIFT + ESC to see what the devil but that causes Windows Explorer to stop working. CTRL + Alt + Delete does not work either. No matter what I try, once I start Fallout 3 after the computer wakes from sleep, I can't do the task to the top manager and I can't use my computer. The only way to get it is to hit the reset button or turn off manually. Can someone please help to get rid of this problem?

  Hi murphy449,

  1. did you of recent changes on the computer?

  2. the problem only happens when you start fallout 3 after the sleep mode?

  3. are you able to wake the computer quits successfully sleep mode?

  4. What is the version of Windows installed on the computer?

  Method 1

  I suggest that you manually download and install the latest drivers for display on the computer card and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  If the previous step fails then I suggest that you try the clean boot procedure to check whether a third-party program installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails then I suggest you check the observer after return with details and events for the cause.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Password not accepted after locking the computer.

  Separated from this thread.

  Hello
  I know it is very old thread, but I have this problem on my computer and don't really know how to solve. @MrGlHayman solution did not help and I tried also the onscreen keyboard to enter a password but nothing seems to work.

  Thanks for any help

  Hi Natrezim,

  Welcome to the Microsoft community.

  According to the request, I understand that you are unable to connect to your computer, because the password is not accepted. I appreciate your efforts to solve this problem.

  To help solve your problem better, could you give us the following information?

  1. Do you receive an error message when you enter your password?
  2. What is the standard account or an administrator account?
  3. You have another user account on your computer?

  If so, then I suggest you log on to the other user account and change the password of the account that you are unable to connect to and see if the problem still persists.

  To change the password of the user account follow the steps below.

  1. Click on Control Panel
  2. In the Control Panel select user accounts
  3. Under user accounts , select account management
  4. Under accounts , select change password

  Try the above steps and get back to us with useful information for assistance.

  Thank you

• Windows says not genuine after that laptop warranty repair return

  I sent my laptop to a power supply repair after it failed. He is now back and looks very good, but it says that windows is not genuine, even after that I run the audit online tool. Any thoughts? Back to toshiba (again)?

  You have recovery discs?
  Original installation Toshiba recovery using these discs and laptop image will be valid and active operating system.

• The password on the computer is not recognized after resuming the computer from sleep mode.

  Original title: windows password problem

  This just started today. When I log on to the computer after having paused, it says that my password is incorrect. Caps lock is disabled and the password. Then I hard boot my computer & it will take my password. What's happening & how to fix it? Help please.

  What do I do or what can I change it to something like a real password?

  Now that you have at least a password that works you must run your own experiences. You might have a problem with CapsLock, NumLock or a few keys that misbehaves. Change a letter/digit at a time until the password fails, you must point in the right direction. We cannot do this for you.

• PASSWORD NOT ACCEPTED WELL THAT RESET THREE TIMES.

  I AM TRYING TO INSTALL THE LATEST VERSION OF FLASH PLAYER, BUT IT WILL NOT ACCEPT ANY PASSWORD, EVEN IF THEY HAVE BEEN RESET

  THREE TIMES.  WHAT SHOULD I DO?

  flitter Bernard wrote:

  WHAT SHOULD I DO?

  Use the password: https://forums.adobe.com/thread/1619850

• Often fingerprint reader stops working after laptop wakes from sleep (Pavilion dv6)

  I am convinced that the fingerprint reader is fine. There must be a problem with the driver may, something inconsistent with a recent update of the Windows 7 software?

  The scenario:

  • Laptop works very well.  I put on standby when I'm done and use the mousepad to wake him up.  LED fingerprint reader blinks, and I can drag my finger to log on.
  • At one point, after a few times to put the laptop to sleep and wake, the fingerprint reader does not.  No flashing.  I slide my finger and the player does not respond at all - is not yet tell me that there was a bad reading.
  • If I login and log back in again, no change. However, if I do a reboot, everything is fine - the fingerprint reader works again.

  I watched over and over again for new drivers and installed.  Nothing seems to affect this scenario.   Unfortunately, this has started to happen about 9 months ago () and because of the sporadic nature of it, I was not attentive enough to know the 'precise' point in time when it started happening.  My instincts tell me that there was some sort of update software/driver along the way which is originally the fingerprint reader not do not work right.  I hope HP continues a relationship with these companies to fingerprint reader and can transmit these questions so that we can do a software update.  But... I don't know if it has been abandoned.  My laptop is still under warranty, but it would be ridiculous to send in just this problem.

  I hope that someone has heard of this on the dv6 and may know a solution.  Thank you!

  My system is a HP dv6-6145dx.  I am running Windows 7, with the latest updates.  The integrated fingerprint reader works on HP Simple pass 2011 v5.1 and Validity Sensor driver 4.3.205.0 version.  When I try to launch the Simple passage interface, it loads the database, but then the application disappears.  I tried to uninstall and reinstall the software, but makes no difference with the issue, I noted.

  "If you keep an open mind, life will give you more opportunities."

  No problem, I am completely I shouldn't bother with Pass Simple version 8.  I advanced and installed version 6.  I did not yet get no joy, so I did a little more digging and found one more late Validity Sensor driver, version 4.3.304 (not noted in the list of update driver for my laptop model).  IT WORKED.  I can now go into hibernation and the fingerprint reader remains functional when the system is out of hibernation.  Previously, it was pretty much guaranteed became disabled.  So... it looks that my problem is now solved.

  

• Satellite A100 - BIOS password not accepted after computer take part

  (Sorry if this question has been asked before, I searched through topics, but too many subjects was found.)

  I have an old A100 for 3 years with no guarantee. I want to sell it so I took apart to clean dust. Everything for the motherboard. When everything has been cleaned and I reinstalled everything, I turned it on and the password of the BIOS has not been accepted. I know the password and it's OK to 100% and shift lock is not locked on.

  Is it possible that the keyboard flat cable has been installed wrongly, the cable was - a.f.a.i.k - reinstalled right, because there is only one way to insert into the slot on the motherboard. (Sorry for my bad English)

  Or BIOS confused and handed over to zero in some Toshiba service password? Is this possible?

  The caps lock is locking itself led of lights up and can not turn off with the CAPS LOCK key.

  What is the solution?

  > Is it possible that the keyboard flat cable has been installed wrongly,
  Connect the keyboard external usb to check (this is good if you remove the internal keyboard when checking)

  > Or BIOS confused and handed over to zero in some Toshiba service password? Is this possible?
  No, it is impossible that this password has been reset. In any case, I've never heard

• Fingerprint reader does not work after the laptop awakens from his sleep.

  Pavilion DV6-6c15nr

  Windows 7 Home Premium

  Fingerprint reader works fine when the computer starts. The drive works fine if I manually lock the system. When the computer enters mode "sleep" through inactivity, then wakes up from his sleep, the fingerprint reader does not work. The player power led does not illuminate, the player does nothing if I drag a registered fingerprint. I must select use authentication information and enter the Windows password. Device Manager says device working properly but it doesn't help. I checked for BIOS, Windows and driver updates but I run in all aspects.

  Hello

  Uninstall the software and current driver for the fingerprint reader.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the latest driver from here.

  Download and install the latest version of the software from here.

• Folio 1020 G1 keyboard works not for 30 seconds after the computer wakes from sleep

  I have several books of Folio 1020 G1 where the integrated keyboard does not work for about 30-60 seconds after the resumption of the operation of the standby mode. Everyone met this problem or a solution?

  The touch pad, touch screen and a usb keyboard immediately all work.

  They work on the load of the plant, but these machines were photographed with Windows Enterprise 8.1 x 64 using Configuration Manager 2012. The pack of drivers for this model of http://ftp.hp.com/pub/caps-softpaq/cmit/HP_Driverpack_Matrix_x64.html, http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70362.exe is applied successfully during the imaging task sequence. I also miss the key features of the FN for brightness and microphone mute, but sp70321.exe (http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7343091 & swItemId = ob_144333_1 & swEnvOid = 415... does not solve this problem.

  This question has been somehow created by installing a software Synaptics 17.x version followed by the installtion of the 18.x software required above it. I don't know if this software was automatically installed from Windows builtin drivers or other drivers imported into Configuration Manager have been incorrectly applied, but running "rundll32.exe"% ProgramFiles%\Synaptics\SynTP\SynISDLL.dll",SilentUninstall_CallerWillReboot" in the sequence of tasks before apply the package stops sp71067.exe the problem didn't happen. "

• Sound glitches after the computer wakes from sleep or Hibernation

  When I first turn on my computer, sound works fine, but after standby or hibernation there is odd audio 'glitches' each time there is a spike in CPU activity. The seeds just sounds like small clicks and pop, but I find them very noticeable. They are triggered by things as simple as loading a page in a web browser (which reached only ~ 30% CPU usage on my computer).

  Here's what I discovered by just my own tests:

  * Happens in programs that use DirectSound and WaveOut. (I think almost all programs use DirectSound, right?)

  Programs that use his alternative such as the ASIO API are not affected. I've tested it using foobar2000.

  * When recording my sound output using Audacity, clicks and POPs are included in the record. (I can download it somewhere if you want to hear exactly the kind of glitches that I'm talking about).

  These facts lead me to believe that the program exists somewhere in the code of Windows Audio (ie. not a hardware or driver problem).

  A few things here that I tried to solve the problem:

  To restart the "Windows Audio" service.

  Stop service "Windows Audio", go to sleep, wake up, start the service 'Windows' Audio.

  * Updated my audio drivers

  Using the default windows audio drivers

  The seeds still exist when I try these. The only thing that solves the problem is to restart the computer.

  The most obvious permanent solution to this problem is simply not to use mode 'sleep', but I should be able to use the "sleep" without these problems. I hope just this problem is fixable by me, because after all, I lived in an attempt to solve this problem, I'm afraid that nothing will work.

  OS: Windows 7 Ultimate x 64

  Sound: Realtek ALC662 HD Audio

  Thanks for the reply again, Umesh. Updating drivers did not work, but I managed to solve the problem.

  In my original post, I said sound glitched whenever there was a CPU usage, but today, I realized that it was actually using the network causing glitches. I updated the driver for my network card and now the problem is gone! I don't know what was going on, but at least it works now!

• ENVY 17: Laptop wakes from sleep several times during the day

  My laptop did this during the last two weeks.

  When I put on standby, he wakes up after a couple hours stay on for a few minutes and go back to sleep. This process is repeated again and again. In the event logs, the wake-up source is unkonow. There is no wake timers activated, and no device is allowed to wake the computer.

  After many expenses hours working on this and read almost everything done online, I'm stuck. How should I proceed?

  Solved.

  There was a problem with the fast start-up of Intel who woke up my comuter. The solution was to disable it.

• Portable keyboard on Vista you will sign in with my password, but will not type after that

  * Original title: keyboard on my laptop computer vista will allow me to connect with my password, but will not type after that. I use a screen keyboard and mouse to this type. I even restored to factory settings. Always won

  My keyboard on my computer vista laptop will only sign in with my password, but will not type after that. I use a screen keyboard and mouse to this type. I even restored to factory settings. Still will not work. Checked ease of access settings and language settings, running of ideas. I tried another keyboard, failed to mention. Re-installed drivers as well. Any help would be great.

  Thanks for your reply. I tidied up my lap top for about 5 months and just used my office for awhile. One day I was in the mood to tinker around with my lap top, then when I turned it back B I N G O!  My main advice worked again. Matter of fact, I use it now. Thank you for your effort in the e-mail back me on this issue. good karma can follow you anyway yoy travels take you.

• Satellite U500 - may not wake from sleep

  Hi all

  I have a Satellite U500 laptop win7 64 bit and my system may not wake from sleep mode.
  "Standby mode" when I press the power button or any key of the keypad power led lights up but the screen stays black and the system is unusable.

  Any help?

  Have you noticed this problem in the first moments after upgrade to Win7?
  I assume that you made a mistake with Vista?

  Have you noticed the same behavior when you use hibernation mode?