PAV 14 14-v148ca laptop: no sound on my TV via HDMI cable more

Similar Questions

• I can't get sound to my tho TV hdmi cable

  I can't get sound to my tho TV hdmi cable

  vojkfojaojojgorjwojs

  Hi Alex,

  Try these steps and check the result.
  Step 1: Select the HDMI
  a. click on the button 'start '.
  b. click on 'control panel '.
  c. with the control to the "Control Panel Home" Panel, click on 'hardware and sound '.
  d. where it says 'Sound' in green letters, there are three options below that are in blue, click on "manage Audio devices.
  e. This will bring up a window titled "Sound".
  f. on the tab 'Read', he has listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.
  g. There should now be a checkmark on this option.
  h. the sound should play through your HDMI connections to the TV.

  Note: This will stop sound from speakers or normal audio output on the laptop.  To get that back, you will need to reverse this process.

  Step 2: Download and install the driver card sound compatible Windows 7 either on the system or device manufacturer's website.

  See also, no sound via HDMI

  Visit our Microsoft answers feedback Forum and let us know what you think.

• No sound for TV connected via HDMI on laptop HP Pavilion

  Hello

  Earlier when I connected my LG HD TV on my laptop with HDMI, audio and video was transferred to television.   At that time, the LG TV was visible as a playback device in the option "Sound".  By mistake, I disabled the LG TV and he vanished from the reading devices in "sound".  Once again, I connected the TV and restarted the laptop but the TV audio playback device has not reappeared.    Entries of application of any person who has faced this problem.    The laptop came with Win 8 pre installed and I him have been subsequently upgraded to Win 8.1.

  Concerning

  Roy

  Hello

  Try the following.

  Unplug the cable HDMI to the TV and the laptop.

  Restart the computer and let Windows take over completely for a few minutes.

  Reconnect the HDMI cable.

  Do a right-click the speaker icon in the taskbar, and select playback devices.

  Empty the acoustic window and right click and enter a tick against as well "Show disabled devices" & "Show disconnected devices".

  If the LG TV shows now, right-click on the entry and select activate.

  Kind regards

  DP - K

• No sound from computer to tv via HDMI cable

  I have a hp probook 4710 s, I have recently cleaned my computer wiping windows vista and download of windows 7 for my computer.  Before I did my hdmi cable that I used for the tv worked, and now that I have reset everything on my computer I can not get my TV to recognize sound through the hdmi cord, even if the image is their.  What should I do?  My laptop has his and my tv has sound when it is not connected to my computer but the second he plug the tv noise disappears and all the sound out of my computer speakers.  I changed all the settings in the sounds and audio devices, and nothing has worked.  any suggestions

  Hello:

  In the section of sound from the Control Panel, when you click on manage Audio devices, you see two choices?

  You should.  You should see your integrated audio system (Soundmax) and your HDMI (which should be your AMD HD Audio device).

  You must have this current option in order to have your HDMI audio to work.

  If it is not present, I recommend you to only visit the Web of AMD site to download and install the latest drivers and the catalyst control center. This package should include the HDMI audio.

  Use the drop down menu to choose the drivers you need:

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  Paul

• tried to connect my computer vaio laptop to my home theatre with a HDMI cable and get great picture on the tv

  Tried to connect my laptop vaio to my home theatre with a HDMI cable to run the windows media player music I get beautiful picture but no sound through home theater just the laptop itself... How do I get sound through home theater too?   It is model # SVE151190X

  Hi woodsman0692,

  To get sound from the HDMI, please activate in sound property.  To do this, press Windows + Q.  That will raise to SEARCH and type in the PANEL.  When Control Panel opens, select SOUND.  When sound property is displayed, right click on AVAMP and on the left, click on SET AS DEFAULT(pic below).  This noise turn sound via HDMI / av receiver system.

  (with plugged hdmi cable)

  

  (without the hdmi cable connected)

  

  Nick-

• Display problem laptop computer connecting to the TV via HDMI

  I have a Satellite L500 - 19 X and when I connect the laptop to my Sony's Bravia TV, the screen is constantly restless.

  I tried to change the refresh rate, but that did not help. The HDMI cable should not be the problem, because it works very well with my Xbox. The problem is there for both in dual display and expand options display.

  Someone else has the same problem and found a solution?

  Thank you

  > That's the problem for both in dual display and expand options display.
  And when you see the desktop on the TV only?

• How to connect my computer laptop advent for my toshiba tv through hdmi cable.

  Please if anyone can help me with this

  I bought a hdmi cable to connect my computer laptop advent for my toshiba tv.

  BIG PROBLEM

  I don't understand the settings.    Call me thick but I was actually tryng to fix this for 2 months

  I am litrely to the point of screaming and ready to throw the laptop and the tv out the window (WHO COULD BE A SHAME REALLY SEE HOW I AM not ACTUALLY THE TV)

  If someone could be so kind as to help and to unmask how and what I have to press on and what to implement in what concerns the settings, I would be so gratefull thanks michelle smith

  Hi michellesmithozzyand,

  I suggest you follow the link given suggestions and check that it works.

  http://Windows.Microsoft.com/en-in/Windows7/connect-your-computer-to-a-TV

  Hope the helps of information.

• Connection to my laptop a Sony Bravia TV with a HDMI cable

  Hello

  I have a laptop with windows 7 HP Pavilion g series and I can't seem to display on my sony bravia tv with a HDMI cable. I've seen other posts on this topic, but I'm not sure that they apply. Can you please help me? The TV said that the format is not readable.

  Thank you.

  It turns out that it was a problem of resolution. I thought about it. Thank you

• Laptop computer connection TV via HDMI cable... no image. ?

  I'm trying to connect my laptop (Dell Inspiron 1525) to my TV via a HDMI cable.  Everything I read says with 2 HDMI devices enabled all what you need to do is to connect the two... but I'm going to diffuluty.  He continues to tell me that there is no signal, but both devices are connected.

  Any help is greatly appreciated!

  Hi Ashley... B,

  Thank you for visiting Microsoft Answers.

  Which version of Windows Vista is installed on your computer?

  1. first you need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.
  2. open the "display settings" in your Vista computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.
  3. pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "
  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.
  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.
   
  Link to view:
  What should I know before adding TV tuners to use with Windows Media Center?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-should-I-know-before-adding-TV-tuners-to-use-with-Windows-Media-Center
   
  Hope the helps of information. Please post back and we do know.
  Kind regards
  Joel S

• Computer Dell laptop doesn't detect the TV via HDMI connection.

  I have a Dell Inspiron N5110 with Windows 7 and a Samsung TV. Whenever I plug my HDMI cable, the only thing I see on my TV screen is No Signal. It is on the correct entry, but my computer still does not recognize the second monitor.
  I have connected my laptop to a front projector, and it worked fine.

  I had problems connecting my laptop before and then finished by needing a new hard drive... So I now have a new hard drive (cool!) but I can not determine what the problem... In devices, Graphics Manager, it says Intel(r) HD Graphics Family and Standard VGA Graphics Adapter. The other has a small yellow triangle with an exclamation point, but when I ask Windows to see if it's updated, it says that Windows has determined that it is up-to-date.

  Help, please!

  I had the same problem as you. Initially, I went to dell drivers

  http://www.Dell.com/support/home/us/en/04/product-support/product/Inspiron-15R-n5110/drivers

  video and downloaded the driver Intel HD Graphics 3000, but that wasn't enough. Yet once my HDMI has not been recognized. I had to also download the same file, the nVIDIA GeForce GT 525 M Graphics Driver (it was my graphics card, if you have the ATI card you download driver ATI). When I installed the last, I was ready to go... Download and install these two drivers and you will solve this problem!

• P70 - A satellite - after victory 8.1 update no sound on the TV via HDMI

  Hello

  I bought my laptop 3 months ago and I didn't have any problems until today.
  Yesterday I updated to Windows 8.1 and since then, I have a problem with the HDMI output...

  I connect to my laptop to the TV and the video is ok but his continuous in the laptop.
  I go to control panel > Sound > playback, but the HDMI output icon is missing.
  I can only see the audio speakers (conexant HD Smart) icon

  I tried to restore my laptop to an earlier state (the only one I could choose was yesterday) and it worked fine, but when I changed my computer laptop and then changed again to a second display screen...
  . It happens again... Output HDMI icon disappeared again

  Anyone know if this has to do with the upgrade to windows 8.1?

  How can I fix because until yesterday, everything worked well
  Thank you

  P.D.: Excuse my English... I m from Spain

  I don't have this model, but on my Satellite everything works correctly after upgrade Win8.1.
  Have you installed upgrading Toshiba instructions and document of instructions to facilities offered on Toshiba download and support page?

  By the way: can you please send name of full model of your laptop?

• No sound on TV with a HDMI cable

  I had windows 7 and would like to watch movies on my TV with my laptop frequently.  No problems.  Now with Windows 8 when I connect to a projector or a TV, the sound is on my laptop.  Why is this and how to fix this?

  Hi JosephBroyles,

  Follow the steps below to solve the problem with the no sound on TV:

  1. Press the Windows key + C to access the charms bar
  2. Select settings
  3. Select Control Panel
  4. Select Device Manager
  5. Expand sound, video and game controller
  6. Click right on the Audio device high definition
  7. Select Uninstall
  8. Restart your computer
  9. Right-click on the "speaker" icon and select the playback device
  10. Select Digital Audio (HDMI)
  11. Select the default device in the select default button
  12. Select apply
  13. Click OK

• Unable to connect laptop to TV via HDMI cable

  Original title: unable to connect

  I recently put HP G-62 - b51SE.I tried to connect to my HDMI TV using the HDMI cable but nothing works. Is there a way I can connect. What settings should I do in order to make the display appear on television. I have windows 7 ultimate.

  Hi Lovemicrosoft,

  1. first you need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.

  2. open the "display settings" in your Vista computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  3. pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  Link to view:

  What should I know before adding TV tuners to use with Windows Media Center?

  http://Windows.Microsoft.com/en-us/Windows7/what-should-I-know-before-adding-TV-tuners-to-use-with-Windows-Media-Center

• ENVY 17-j053ea: no sound on TV connected to the laptop via HDMI

  When my laptop is connected to my TV via HDMI computer laptop if poster on the TV but the sound is played if the laptop speakers and not the TV.

  I had this problem since I bought the laptop in October 2013, while she was running Windows 8, it is now running Windows 10, which actually has no difference.

  I tried to update the drivers of graphics card (NVIDIA GeForce GT M 740), Intel HD Graphics 4600 graphics card and speakers. If I'm in the playback devices, that the TV does not, even when it is set to display disabled and disconnected devices, but I do not know why.

  I know that the problem is something to do with my laptop and not on cable TV or HDMI because it works with 2 other laptops in my house, and the TV is shown as an audio device on both.

  Any help or suggestions are greatly appreciated.

  OK, this driver must have worked.

  Just click on this folder 7-zip created because I want to show you where to find the driver.  We will now try to force the installation.

  Click on the file and it will show several records.  Click the DisplayAudio folder.

  Then, there are two folders inside this one.  Click on the top a list (6.16.00.3178).

  Then click on the configuration file IntcDAud and you will see the driver for the hardware ID you have posted.

  HDAUDIO\FUNC_01 & VEN_8086 & DEV_2807 & SUBSYS_80860101.

  Close to this now.

  Go to Device Manager and click again on the HD audio device.  Click the driver tab.  Click on set to update driver.

  Select the browse my computer for driver again software option, but this time at the bottom of this window, select the let me pick from a list of drivers for devices on my computer.  Then click on disk and browse the right to this configuration information IntcDAud file and see if the driver will be installed in this way.

  If this is the case, restart the PC.  If it is not, unfortunately, I have no idea why this driver not install because it must have worked using the first method.

  But this lack of driver, that's why you have no audio from the HDMI out port.

• Satellite C55D - no sound on the TV using an HDMI cable.

  Hello

  When I connect my laptop via hdmi cable to the TV digital sound is heard through the speakers, but not on TV.
  It worked well before, not now.
  Everything is connected, I tested with new cables. It is set up.
  Devices, it seems that none connected.

  Help, please?

  Try to activate sound output manually in the sound properties. What entries you can see in the devices section of reading?