No sound for TV connected via HDMI on laptop HP Pavilion

Similar Questions

• Max Resolution for external monitor via HDMI on Lenovo Y700?

  Hello

  I hope that someone has experience with external monitors on a computer laptop y700.

  I would like to ask if my laptop Y700 supports resolutions higher than 1920 x 1080 for external displays via HDMI.

  My model is:

  https://www.Amazon.de/Lenovo-i5-6300HQ-quad-core-Prozessor-Betriebssystem/DP/B016QB9HZK/ref=sr_1_2?i...

  I want to use a monitor with a resolution of: 2560 x 1080

  https://www.Amazon.de/DP/B00TF0X37I/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&ColId=31RP1ZDSM66ZA&colii...

  Is this possible with my laptop. And it is even possible to connect a 4K screen?

  Thanks in advance for your help.

  So finally, I tried to connect my laptop to a 2560 x 1080 widescreen-resolution-display via HDMI in an electronics store:

  THIS MARKET! It is not a problem to run it with 2560 x 1080 at 60 Hz. The only problem might be a 4K resolution screen that it only works with 30 Hz, because it's an HDMI 1.4 port.

• SP2309W won't go into energy saving mode when connected via HDMI

  Hello

  I just got 2 SP2309W, and I love them, the only problem I encounter is just one of them (the one connected via HDMI) is not in power saving mode, even when I turn off my laptop. Is anyone else having the same problem?

  I have connected the monitor via VGA and DVI and the energy saver works fine but it does not work with HDMI

  I have a XPS 1530, Intel Core 2 Duo processor T9300with a 256 MB NVIDIA GeForce 8600 M GT video card.

  My XPS has a HDMI and VGA input so I have a monitor connected via VGA and the other via HDMI and even when I go around, always one connected via HDMI is not in the standby power mode even if the laptop is turned off (or when he goes to sleep).

  Thanks for your help,

  Ivan

  We left three SP2309Ws on all night to disconnect the HDMI cable and in STFC mode and came this morning to see the message from MONIQUE always there. They all didn't say, 'no HDMI cable. This is normal. In fact, we have tested on several other models of monitors and they all do the same thing.

• Satellite C660-1RQ cannot connect via HDMI to the NEC projector

  Hello.

  I have laptop Toshiba C660-1RQ.
  It can not connect via HDMI to the NEC projector.
  I tried many drivers - the 268,57 (taken from the Toshiba site) to the new 331.58

  I thought, that it my problem, but the same lapto (my friend work - we have a few these notebooks in company) works well...

  And my HDMI works with monitors, TV (but sometimes!), etc.

  I don't know what to do...

  > And my HDMI works with monitors, TV (but sometimes!), etc.

  If s computer laptop HDMI port works correctly in relationship with other devices, I think that the problem is related to your laptop.

  What happens exactly when the projector is connected? Can you pass to the external video using the FN + F5 key combination?

  The use of Fn + F5 keys can toggle between internal and external display.

• U2715H, connected via HDMI or through DP?

  Hello.

  I have a U2715H monitor and consider buying a more. My video card has only one output port of DP. Where my questions:

  1. If I connect the second monitor via HDMI, the U2715H still will work at maximum capacity?

  2 would it not be better to use a CDM (male) to HDMI Cable (male) to connect the monitor instead of a (male) HDMI to HDMI Cable (male)?

  3. how worth it would be that would buy a new video card (which has several ports of DP) it?

  Note: I hesitate to do that because I met major problems after installing a new map recently and had to revert to the original. But I'll try again, if my monitors don't work 100% connected via HDMI.

  Thank you!

  Display port will give you 4K.  HDMI will not

• Popping / crackling sound when the Satellite L650-1PQ is connected via HDMI

  Hi all

  I have recently connected my laptop to the TV via HDMI, and I hear his pop/cracking every time the music, video or games is played. I tested the speakers with my MP3 player and the Xbox, and there is no POPs or crackles when I'm with them.

  I've updated to the latest drivers from Toshiba, but it has not yet resolved the issue.
  Any help would be greatly appreciated!

  Care of my system is as follows:

  Processor: 2.66 GHz Intel Core i5 480M
  RAM: 4 GB DDR3 RAM
  OS: 64 - bit Windows 7 Home Premium
  Graphics card: ATI Mobility Radeon HD 5650

  > I have recently connected my laptop to the TV via HDMI, and I hear his pop/cracking every time the music, video or games is played

  The crackling is in from the TV speakers. Right?

  Can you hear the Crackle even using headphones or speakers for laptop?
  If not, then I think that this problem could be related to his driver.

  In your case, I would check the settings in the control panel-> sound-> playback-> audio digital-> set up

• Satellite P300D connected via HDMI to TV - screen becames black for a second

  I have the Satellite P300D.
  But now I have a problem with the P300 HDMI port.

  I have connected to my TV via HDMI.
  The photo is here.
  Every two minutes the black screen for a seconds fue becames, then the picture comes back.
  It is very annoying when I watch a movie.

  Is there a problem with a hdmi cable or with drivers?

  Is it possible to get this working?

  Thanks for any help

  > Is there a problem with a hdmi cable or with drivers?
  Who knows?  :| I think that you will have to test it.

  You could try to reinstall the HDMI Control Manager. This driver is required for your HDMI controller.
  If the question will always be, I recommend that you test different HDMI cables.

• I am trying to connect a Macbook Pro with Retina display for a new monitor Dell Ultrasharp 3014. I tried to connect via HDMI and DVI cable supplied with the monitor but the monitor says "no cable dvi - d".

  How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.

  Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.

• Problem with sound when Aspire 5750 G connected via HDMI

  Hello

  I'm having a problem connecting my Aspire 5750 G to my TV through my HDMI cable. Previously, I've always been able to go in manage Audio devices to choose the HDMI option, but today this option disappeared. Nothing has changed with my TV or my cable and all my video and audio drivers are up to date. Is there another way to solve this problem?

  India

  Hello

  Check if the HDMI Audio is listed in Control Panel.

  Click Start ==> Panel ==> Sound ==> Playbacktab Select. If HDMI Audio is listed here, make sure that the green check mark is listed. If not, just click on any space and select show disabled or disconnected devices. Then right-click on the HDMI Audio and select as a default device.

  Thank you best regards n

  Rakesh

• No sound on TV when connected via HDMI

  I guess the title says it all. When I connect my laptop via HDMI to my TV, there is no noise coming from the TV, I have to listen through the laptop speakers.

  My model # is dv6 - 2143ca

  My operating system is Windows 7 - was NOT an upgrade of Vista

  64-bit operating system

  Help, please! Thanks in advance!

  Hello

  Disconnect the laptop from the PC.  Return to the acoustic window.  Left click the ATI HDMI output once to highlight then right click and set it as the default device.  Click on apply to apply the change, close the window and try again to establish the connection.

  Kind regards

  DP - K

• Sound is more output via HDMI

  Hello

  I have a desktop HP m9300t with Vista 64 Bit SP2. It has a video card Nvidia GeForce 9300 256 MB with a HDMI output (and DVI).

  I've always been able to play the video and sound through an HDMI cable connected to my TV. A few weeks ago, I ran a few updates and uninstall several programs I do not use or need. I installed the Vista SP2 and updated my nvidia driver for the last available on the nvidia website. Now, I can only video output via HDMI, but no sound.

  I have the Realtek HDMI output defined as the default device under sound-> read (and it shows like 'work'). When I test it, I can see the volume up and down bar, but there is no sound on my TV. I also tried many different programs (WMP, Winamp, Media Player classic, Firefox, but still no sound.)

  Sound works fine in my computer speakers when I put as device by default.

  I tried two different HDMI cables, which I know work because they took out his other devices.

  I've updated my audio driver for the last available.

  I installed an older video driver without success.

  I scoured the internet for hours, but nothing I can find solves my problem.

  Hello

  Check the device settings in device that receives the stream of video and audio HDMI.

  What camera brand and model has no sound via HDMI?

  What is plugged into the SPDIF Jack on the back of your PC, no matter what?

  Go to www.realtek.com and download and install the latest audio driver.

  Go to www.nvidia.com and download and install the latest video driver.

  You could also try to uncheck HDMI and check digtial output and see if that produces sounds.

  These "how-to" HP articles can also provide assistance.

  Even the latest drivers and updates may cause the problem.  I have run into a problem of sound with Realtek and had to fall back to the original audio driver supplied with the PC to get his job.  Five months later, Realtek audio driver problem fixed.  You need to maybe do this or maybe go back to the last good Windows restore point known. Of course if it does not then you would have to depend on your image less hard drive backup.

  It is also possible that your HDMI audio circuits are bad.

• Satellite A100-062 - connect via HDMI LCD monitor

  Hello

  I wish I could connect my laptop Satellite A100-062 to LCD TV.
  The TV has a HDMI input. I understand that I could get a cable to connect DVI to HDMI, but I'm not sure I'd be able to output/DVI laptop computer.

  Is it possible to connect the laptop to a TV LCD with HDMI? If so, how would that be better achieved? Do I need a series of cables converters?

  Any comments on this would be greatly appreciated.
  Concerning
  Ben milk

  Hello

  As much as I know this laptop can't stand out DVI, or HDMI port.
  It supports only s-video and RGB (monitor) output port.

  My Satellite phone supports a HDMI port output. The external monitor supports DVI and HDMI.
  I connected my laptop via a DVI-HDMI laptop/DVI HDMI cable on my monitor.

  I don't know if there is a RGB to HDMI adapter I doubt m
  But I found another solution;
  You can use a cable S-video to SCART and was able to connect the converter as Lindy - SCART to HDMI between laptop and TV or LCD display.
  This converter is not cheap, but it s about 120Euros

• Mac OS 10.5 Hello cannot find the printer driver for P1606dn connected via a wired network.

  I tried to connect my HP Laserjet Pro P1606dn to my PowerMac G5 running Mac OS 10.5.8.  I have connected the priner to my LAN via the Ethernet cables and Switch 8 port NetGear.  I then properly installed printer driver from the CD provided on the Mac and went into system preferences / Print & Fax to add the printer to the list of the connected printers.  Click on the button «+»  The HP P106dn was listed in the table (kind = Hello).

  I chose this entry in the table, and the dialog box immediately went into action: the pullodwn "to Print using" listed the message 'Please select a printer or driver model' greyed and a spinning wheel called 'Search for new drivers' appeared underneath.  The dialog box search but never find the printer driver (I waited for 20 minutes without success).  I installed some other HP printers in this way on this machine with no problems, for example, HP Color Laserjet 2605dn.  Why this method does not work with this printer?

  I was able to connect to this printer with other (Intel) Macs in my house through this arrangement of LAN.  Is the printer driver for the Intel Macs only?

  I disconnected the printer from the local network and connected directly to my Mac with a USB cable.  The same process, and I was able to connect to this printer.  Successfully print a document page.  Although it gives me a work-around for Mac G5, I need to share this printer with other Macs in my household.

  I went on the HP download site and downloaded the latest driver for this printer, re-installed the printer driver on Mac and repeat the steps for the arrangement of LAN (above) complete the connection via the Print & Fax dialog box.  The result was the same: spinning wheel looking for a printer driver are not.

  I don't know what else to do, or why this facility will not work.  I would much appreciate it if someone could give an explanation for this or any suggestions as to what can be done?

  Ed

  I'm sorry to get back to you on this so late.  I was OOT Sunday all day.

  Ok. So, here is what happened.  As I mentioned at the end of my last post, I was in the process of resetting my printing system, repair disk permissions, then restarting.   Reset the printing system wiped out all my printers in the "Printers" pane in the "Print & Fax" system preferences dialog window  I moved forward and fix permissions of the drive on my system disk.  A number of authorities have been repaired, but nothing that I could decipher impression related ro.  Finally, I restarted my Mac and went directly to the dialog box print & Telec.

  As the printers pane was still empty, I'm gone before adding the simplest of my printers (LaserWriter 360 connected via AppleTalk) who has always been correctly added to the list printers in the past.  No chance!  WAITED a few minutes everything is was "Looking for new drivers.".  I tried the Color Laserjet 2605dn.  No luck.  Then the Laserjet P1606dn.  No luck.

  Thus, this way of solution did not work, and now I was without any driver associated with one of my connected printers.  I decided that I had no choice to rebuild the operating system.  I started my DVD of Installation OS 10.5.4 to rebuild my system (without reformatting my HARD drive).  Once which was finished, I've immediately went to the Print & Fax dialog box and tried to add in each of my printers.  In a few seconds the LaserWriter was added successfully, then the HP Color Laserjet 2605dn, and FINALLY, the Laserjet P1606dn.  Thus, it appeared that my upgrade to OS 10.5.8 was at the origin of the problem.

  I proceed with Sofware Update to restore the computer to OS 10.5.8 and again once, went to the dialog box Print & Fax to experiment with the addition of each of the printers again.  Stopping before the acceptance of each 'Add', I could find quickly and successfully the drivers for each of the connected printers.  So, it doesn't seem to be a problem with OS 10.5.8 find printer drivers.

  After reflection, I concluded that the problem must have appeared during the upgrade to OS 10.4.11 OS 10.5.4, but it remained hidden until I tried to add these new printers to the list of printers.

  I appreciate the reference to the last download Laserjet full feature software.   Since I was able to solve the problem without it, I mind not do the download.

  I want to thank you for patiently stay with me during the last two weeks, your advice and comments.  Just having someone to "talk" about it, it was reassuring and useful that I went along to apply each suggestion to the problem.  I tried to solve this problem several times on my own before that, the search of the forums, and I hesitated to participate actively – to reach out.  I'm feeling very different about it now.  Once again, thanks a lot.

• my laptop g60 does not appear on my sony bravia TV when I connect via HDMI?

  I have a HP G60 104 ca laptop running windows vista and a 60 Hz, 46 '' 1080 p Sony Bravia TV. I tried to connect my laptop via HDMI to my TV but I do not get a display. My wife has a laptop Asus on windows vista and I had no problem, it shows up on the TV.

  Is there a device driver special I need to connect HP laptop to tv or maybe a simple setting that needs to be changed?

  The Asus has chipset intel intigrated while my HP Nvidia Graphics making the display settings on both computers laptops different vista.

  Also, I downloaded the latest Nvidia drivers so they are perfectly up-to-date.

  Hello

  Download and install the latest version of buttons to quick launch on the link below.

  FTP://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46731.exe

  When you installed, restart the PC.  When windows is up and running again, connect your PC to your TV, press fn + f4 and select projector only, and press ENTER to transfer the video and audio output on the TV.

  Best wishes

  DP - K

• No sound on the TV LCD Satellite A200 is connected via HDMI

  The problen is: I connect to laptop (A200) for LCD TV (Philips) by HDMI. The video is OK, but his stay on laptop not LCD TV.

  Maybe the problem is THAT HDMI 1.2 does support audio and video not together? Only 1.3?

  Sorry for my English

  Hello Maria

  I have connected successfully Satellite A200 to my 32 LCD TV with success. Be sure to use high quality cable. As Gantz has already written sound can be enabled in the sound properties. When the cable is connected on the reading tab, enable HDMI output.