Pavilion 15-p047na: error code 0xc000000f on hp Pavilion 15-p047na with windows 10

Similar Questions

• How can I fix C00D199F error code when trying to burn a CD with Windows Media player.

  Original title: How can I fix C00D199F error code

  Error message when trying to burn a cd with Windows Media Player

  Hello

  1. what version of Windows Media Player do you use?

  2. the specific issue of burning CD using WMP?

  3. What is the exact full error message?

  4. what you are trying to burn?

  5. is the specific question on the disk?

  Method 1: You can run the fixit available in the link below and

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems/en-us?EntryPoint=lightbox

  Method 2: Clean the disc

  Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver side of the disc with a soft and Lint cotton cloth. Do not use cloth of paper which can scratch the plastic and leave streaks. When you clean the disc, wipe from the center of the disc outward. Do not use a circular motion. If the problem persists, clean the disc with a damp cloth or a commercial CD or DVD cleaning solution. Dry the disc thoroughly until you insert the disc in the drive.

  Select a slower recording speed and check if that helps.

  1. in the Tools menu, click Options, and then click the devices tab.
  2. in devices, double-click the CD burner, and then click the recording tab.
  3. in the write speed list, select a slower speed.

  Method 3:

  Perform the clean boot and check:

   

  http://support.Microsoft.com/kb/310353

  Follow the above article.

  
  If you have any third party installed a CD/DVD burning software, uninstall them temporarily for Add / Remove Programs. Subsequently, check if you are able to burn CDs in Windows Media Player.

  Reference: Burn your own custom CDs

  Hope the above information is helpful.

• "Error code: 80070002 0 x ' OR"0 x 80070003"Windows updates failed?

  " Error code: 80070002 0 x ' OR"0 x 80070003"Windows updates failed? Regds, 'a journey of a thousand miles begins with a first step."

  "Resolution for the error Code: 80070002 0 x ' OR '0 x 80070003 '.

  To resolve this problem, remove the download directory and then to return to the update sites. To do this, follow these steps:

  1. Stop the automatic updates service. To do this, follow these steps:
     1. Click Start and run, type services.msc, and then click OK.
     2. Right-click the automatic updates service and then click on stop.
     3. Minimize the Services snap-in.
  2. Rename C:\Windows\SoftwareDistribution directory. To do this, follow these steps:
     1. Click Start, run, type cmd, and then click OK.
     2. Type cd %windir%, and then press ENTER.
     3. Type ren C:\Windows\SoftwareDistribution SDTemp, and then press ENTER
     4. Type exit and press ENTER.

     Note When you delete the folder % windir%\softwaredistribution, the history list is erased from the "Review your Updates" section of the Windows Update Web site. This action will not affect the updates installed on your computer. Subsequent updates will appear in the history list.

  3. Start the automatic updates service. To do this, follow these steps:
     1. Expand the Services snap-in.
     2. Right-click the automatic updates service and then click Start.
     3. Close the Services snap-in window.
  4. Visit the Windows Update Web site, Microsoft Update Web site, or the WSUS server again, and then download an update.

  Kind regards
  Sohail Patel

  Regds, 'a journey of a thousand miles begins with a first step."

• I get error code 802000D when I install the updates of windows. How can I fix this error?

  I get error code 802000D when I install the updates of windows. What this mean and how can I solve this problem? Please answer. Thank you.

  Hello

  ·         Did you change your computer before this problem?

  I suggest to reset the Windows Update components and check if it works.

  See article:

  http://support.Microsoft.com/kb/971058

• 'ERROR 8024200d' this is the error code I get when I try to run Windows update

  code 8024200 D is the error code I get when I try to run Windows update. My Windows Vista computer is SP2 after you install updates.

  I tried installing several times with no luck and end up with the same error code. I have "Microsoft Security Essenial" installed on the PC.

  Thank you

  Hello
  You can follow below link that can help you to solve your problem:
  Windows Update error 8024200d
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024200d
   
  Note: Above the article implies on error 8024200 d.
   

• 0 - X 80190194 error CODE when I try to download and install windows live essentials.

  I get this error code when I try to download and install windows live essentials. It worked OK on my computer for ages then recently kepet receive error messages. After uninstalling, I can't reinstall.

  Hello

  Because the problem is related to the installation of Windows Live Essentials, I suggest you to post the question on the link below.

  http://windowslivehelp.com/product.aspx?ProductID=12

• When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA

  When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA

  You can try to download the 64-bit version.  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

• MediaSmart Photo and Webcam does not not on HP Pavilion dm1-2150so with Windows 7

  I have a HP Pavilion dm1-2150so with Windows 7. When I double click a photo that she usually opens with HP Photo Viewer, now it doesn't. When I choose "open with...". "another program like paint or Windows Photo Viewer there is no problem. HP Photo Viewer is the default program ("Preview with HP Photo Viewer" is the "BOLD" alternative, when I right click on an image).

  I tried to open the program (both from the Start Menu and the MediaSmart button next to the Start Menu button), but it does not work either. The MediaSmart button, you can also "use the webcam' or"Watch movies and television", so I tried to open the webcam but who does not either. Although when I clicked on the «watch movies...» "- button, the video program works normally.

  What's wrong? Should / can I reinstall the whole MediSmart and if so, how do I that?

  Thank you, Kell

  Hey Kell,

  I think that you were right assuming that the best way to solve this problem would be to reinstall both applications - you can do the following.

  First, download the programs installation for two applications using the links below and Save both in your downloads folder.

  HP MediaSmart Photo.

  HP MediaSmart Webcam.

  When the completed downloads, windows, Control Panel, open programs and features, right-click on HP MediaSmart Photo and select uninstall - when it is finished, do the same for HP MediaSmart Webcam.

  Reboot the laptop.

  When windows has completely recharged, open your downloads folder and double-click the HP MediaSmart Photo install to start installation - once this is completed, do the same thing for HP MediaSmart Webcam.

  When the two facilities are completed, restart the computer again.

  Kind regards

  DP - K

• Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen

  I have a Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen with a blinking cursor. I ran all the tests start and everything this past. I tried all F8, F9, F10, F11, recovery options with no luck. I tried to start with the ERD Window 7 64 bit I created when I install the laptop. Nothing... I did it with all the disconnected device. No luck. I'm looking for all the options until I re - install windows. I started with the Windows 7 recovery DVD and it reads, but I cancelled the process because it will reformat the hard drive and I expect to work around all the hassels of having settings to reinstall the software, etc.. Any ideas would be welcome.

  Thanks for the reply. I already tried these steps. I created a bootable floppy that I can get the data on the hard drive and am trying to restore windows to the recpvery of the DVD system that I ordered with the computer. Thank you

• Error code 0xc000000F retrieving system

  Can we say what we mean because I want my daughter's laptop, but get this code and already have a toshiba dvd recover and still fail the 0xc000000f error code.

  MVG

  + Message has been translated.

  It could be possible that your recovery disc isn t ok.

  Have you used this drive in the past? He has already worked?

• Error code: 0 x 80248011 - cannot display web page Windows Update

  When you try to use microsoft update after a few seconds of analysis of the updates, the update stops - can or view web page - and display an error message [error number: 0 x 80248011]

  Recommended action is to remove temporary internet files & restart internet explore.

  DONE, (3 times), but still the same result, a few seconds in the analysis stops update - cannot display web page [error number: 0 x 80248011]

  What's wrong???

  Thank you

  gfa5775

  GFA,

  Number of all other errors

  First of all to clear up your Temp File/Cache, restart the computer and try again. Better and easier to use - CCleaner.

  Reboot and reset the Windows Update components with the aggressive part of the correction

  How to reset the Windows Update components?  http://support.Microsoft.com/kb/971058

  Reset

  always disclose your OS versions and IE when you want to help.

  http://support.Microsoft.com/kb/555375

  What updates you trying to install?

  Error code 0 x 80248011 may occur when there is a problem with the database that stores Windows Update or Microsoft Update information on your computer.

  May occur due to corruption in the Datatore folder or problems in the Internet cache

  This will give you a starting point for your troubleshooting anyway.

• Error code: 80070017 every time I try to install Windows Explorer 8

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Please help me. I have Vista Home Premium 32 - bit SP2... and have tried for 3 days to install windows explorer 8 without success. I keep getting the error code: 80070017 windows update encountered an unknown error. What happened when I tried to install SP2 as well but was able to have it installed last night.

  • You have problems with programs: windows update Setup explore 8, it downloads but will not install!
  • Error messages: update code 80070017 windows has encountered an unknown error.
  • Recent changes made to your computer: no
  • What you have already tried to solve the problem: I tried everything what I found on social nets, as the closure of spyware, run the chkdsk tool, rename the download folder, I can't get rid of temporary files... and so on... Please help if you have more suggestions, I'm not so much worried, but there are sites on what I need to do my job. and they say that I need to improve my windows Explorer... Be precise with steps, I'm not very computer saavy! obviously... any help would be appreciated

  0 X 80070017-2147024873 - ERROR_CRC
  Data error (cyclic redundancy check).

  Maybe manually download IE8 and install, for example download on a USB key or external hard drive and install from there.
  http://www.Microsoft.com/Windows/downloads/default.aspx

  You're already ran chkdsk. Have you ran the defrag program.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Get error codes: 80246002 / 80242016 / while 80004004 trying to install Windows updates

  Original title: help Pleasee! Updates. ERROR CODES: 80246002 / 80242016 / 80004004. Important. __

  Here's the problem: Internet explorer 8 for windows Vista error code: 80246002 / updates of security for windows (KB938464) (KB952709) (KB951376) error code: 80242016 and security update for windows Vista (KB954459) error code: 80004004. They are all important and I can't find help anywhere. Can someone help me solve this problem? I go to the website listed in detail and can't guess what no problem help. What good is supported if they do not?

  Hi RhondaJean,
   
  I suggest that you put your computer in a clean boot State and then install the updates that are mentioned. The issue could be related to a third party software conflict causing the issue (error codes) to occur. Clean boot helps eliminate conflicts of third party software.
   
  Note: Follow step 7 to your computer as usual.
  KB that you can download and install
  KB938464
  KB952709
  KB951376
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error code: 2000-0146 (laptop hung on "Installation screen Windows updates")

  OK, so I have every time I turn on my computer dell laptop (I have windows vista) it acts like it is to install the updates of windows. He said same facility 3/3 even though the completion bar shows 0%. She does this, is like its about to restart then passes to the installation screen.  I ran the diagnostic test and the error code 2000-0146 came. I'm not sure if this is useful, but if anyone has a solution please help! Thank you

  Oh and I tried to restore the option and he did nothing.

  Hi cgardne5,
   
  1. How did you restore the computer?
   
  Try these steps and check the result.
  Step 1: The repair of the boot with Vista DVD
  a. Insert the Windows DVD.
  b. restart your computer.
  c. let the computer restart (boot) from the DVD.
  d. If you are prompted, press a key to continue.
  e. When you reach the screen install Windows, select your preferences in the language to install, time and currency format and keyboard or input method boxes, and then click Next.
  f. do not click install now. Instead, click on repair your computer. The System Recovery Options dialog box appears.
  g. make sure that the appropriate operating system is selected, and then click Next.
  h. After you click Next, the System Recovery Options menu appears.
  i. click on startup repair. Once the Startup Repair tool is completed, click Finish to restart the computer.
  j. remove the DVD and restart the computer to see if the system boots fine.
   
  See Repairs to the system of Windows recovery environment
  Step 2: If you do not have the Vista DVD, start the computer in safe mode and restore the computer
  See Start your computer in safe mode
  See System Restore
  NOTE: You can also choose the system restore on the system recovery options.
   
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ERROR CODE 606 CAUSING FAILURE OF THE UPDATES OF WINDOWS 'IMPORTANT' 10

  Help, please!  I try to install the last "10 important updates" for Windows, which I was informed automatically.  I tried 4 times in 2 days now and each of them settled due to the 'error Code 606'.  When I click on "help", he pulls up "WindowsUpdate_00000646" "WindowsUpdate_dt000" If that's any help.  Each time, it goes through all the motions, past by restarting as usual, then I get the same reminder of updates, showing "failed" on all of them.  I have not had this problem before.  I don't know what to do to get these updates installed.  I NEED HELP ASAP!  I am a user of impressive program but not at all a geek who can solve the problems that arise, and I have no one to turn to in my personal circle.

  First of all try to install updates when you're disconnected from the internet.

  If no joy, then try to manually download the same and install.
  You can search the individual updates here:
  http://www.Microsoft.com/downloads/en/default.aspx

  He just put in the KB number and then perform a search.

  If this still creates one problem another thing you can try is disable the User Account Control first download before the update manually. See: (Guided Help: settings to adjust user account control in Windows 7):
  http://support.microsoft.com/kb/975787/en-us.

  How to use User Account Control (UAC) in Windows Vista
  http://support.Microsoft.com/kb/922708

  TaurArian [MVP] 2005-2010 - Update Services