Pavilion 15 windows 8: unable to connect wifi

Similar Questions

• Failed to open the first Pro CC 2015.Windows are unable to connect to the Adobe server... This application failed to start properly 0xc000001d... Click ok to close the application

  Failed to open the first Pro CC 2015.Windows are unable to connect to the Adobe server... This application failed to start properly 0xc000001d... Click ok to close the application

  Hi qksdjhfb,

  For a fix, update for first Pro CC 2015 (9.2).

  Thank you

  Kevin

• Pavilion 140 550 - t: unable to connect to the windows service

  Not sure if it's the good advice of post, but here goes.

  Just got the HP computer yesterday and installed Norton Security, Malwarebytes, and Windows Live Mail (do not like the version of Mail). Now, when I start it, I get "Unable to connect to the Windows Service" pop up and WLM crashes when I try to open it. What the DEVIL?

  Had the same problem on the one I just replaced. My laptop became the 'Group Policy' error thing, but I think I fixed it.

  Any suggestions? Windows is a joke!

  If it is Norton Security, then it's a firewall as well and firewalls blocking things, it's that they are supposed to do. So demand for three, you said that this is probably the cause.

  But if you do not want to test it, then try the system restore I've mentioned or reload the image origin, then just put in place the email again and see if it works without the other two installed, first to see if it will work with anything else in the picture.

• HP Pavilion 15 laptop: Solved: unable to connect to my wireless network

  I have problems connecting to my wireless network. In available connections, my network is there with an x next to it. I can click on it and put my security key in, but it says unable to connect to the network. I've updated ready network cards. Any help would be greatly appreciated.

  Bobby

  Thank you for all your help. I'm back on now. I started having trouble a few weeks ago. My wifi connection would pass, and I have to disable and then re activate my network card back. This has been relatively shortly after my upgrade from Windows 10 but not immediately after. Then the other day which didn't work and I could not connect at all. I read somewhere to try to uninstall the network adapter and then restarting. It did not work. I also read to find updates for the network card and install those which, as mentioned by ichi730 as well. This no longer works. Then, I realized that I had not tried to restart the router after reading the post of WyreNut. It worked, thank you! I feel that it is a combination of the two pieces of advice that have worked so.

  Thank you all for your comments, it's much appreciated.

  Bobby

• Error when you try to connect to games for Windows Marketplace: unable to connect. ID Windows Live ID or the password entered is not valid. Enter your information and you reconnect. Code: 80048823

  Unable to sign in to games for Windows Marketplace

  Sign in to games for Windows Marketplace issues

  This message can connect to everything but the games for Windows Marketplace

  Unable to connect. ID Windows Live ID or the password entered is not valid. Enter your information and you reconnect. Code: 80048823

  Hello RobBurton,

  I suggest that you post your question in the Games for Windows Live forum below:
  http://forums.gamesforwindows.com/t/785.aspx

  It would be best to help with this question.

  Thank you

  Marilyn

• HPBE005TU: unable to connect Wifi

  I am unable to connect to the wifi while they inspected the trouble shootint it comes up with the error... USE THE SWITCH ON THE FRONT OR SIDE OF THE COMPUTER, OR THE FUNCTION KEYS

  Hello

  Have you tried the switch? It's f12

  Kind regards.

• Iphone4S unable to connect wifi... Help...

  I just bought my iphone... everythings so well... at first, wifi reacts to my wifi at home, then all of a sudden, it turns out... its been two weeks since i can not connect WiFi or even join wireless network.i have read tried them all to connect, but really cant. Ive already has resstart parameter and all... Please help.and thank you in advance.

  Hello Dissed.thanks forever you answer. Ive been thru all the procedures you mentioned before that I came here to find solutions. As I said b4, all perfectly healthy... I have my own wifi here in my house and I connected my iPhone so it's automatically activated when I'm home. And in the décor, free Wi - Fi is always on... abt join network too. So, if I am outside, wifi notifications automatically showed where are wifi network connections. Dissed I am very grateful for spend me your time and tried to help me. God bless you and take care.thank you

• Pavilion 14-ab051tx N4G24PA: unable to connect to any wireless network after the upgrade to Windows 10

  I recently bought a 14-ab-51tx Pavilion N4G24PA, this is my first laptop from HP, it comes with Windows already installed 8.1 and it worked fine.

  The thing is, I kind of get used to using Windows 10 on my previous laptop, so without further hesitation I upgraded to 64-bit Windows 10.

  Here's what I did wrong:

  Instead of update Windows 8.1 for Windows 10, I indeliberately he installed fresh, with couple of mouse clicks, I didn't realize that I also remove the recovery partition.

  I realized only after the installation process is complete, but then it was too late. I look forward to using my laptop with Windows 10 freshly installed inside to make some games just noticed that I couldn't connect to any network without wire, House or public. It recognizes my wifi at home, but the signal bar is bizarre, there is only 1 bar of signal even if the wireless router is only about 10 feet from him, so I checked my other computers and smartphones, but the signal on them is ridiculously high (full bar), it also detects another wireless network that are further away than my wireless router.

  But back to my HP laptop, I tried to connect to my home network despite the signal bar with the right entry security key, but it does not connect, it says "Cannot connect to the network".

  Tried updating drivers with HP Support Assistant and no luck, the problem persists, tried all the solution on the internet, int ip reset, reset winsock, checking and unchecking, always without success.

  Can someone help me please...

  Hello:

  The BOM indicates that your laptop comes with a Broadcom wireless card.

  Have you tried the last W10 driver for this card to support your PC and driver page?

  This package contains the Broadcom Wireless LAN drivers for the laptop models running a supported operating system. Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.

  Exit the: December 17, 2015

  Version 7.35.317.0 Rev.A

  File name: sp74241.exe

• HP Pavilion Touchsmart 11 ED09AU - unable to connect to wifi

  Hello! I had problems with this laptop. I bought last month. After using it for a week, I noticed that it is not automatically connect to wifi, and sometimes it takes a little longer (probably an hour) so that it connects successfully to a wifi. And if ever he should be connected, internet access said "limited." I brought to a service center, they changed the wifi card, and then I guess that after using it for more than a week, the same problem occurred. This is a big drawback for me I hope that someone can help me, and I just want to know if anyone had experienced the same problem. Thank you very much!

  Hello Jabb050914,

  Welcome to the HP Forums!

  I understand that you are having problems with wireless connectivity. Can you please tell me the name of your new wireless card? You should be able to find this in the device under network adapters Manager. Also, can you me if other devices are wireless, or if this PC works with a wired connection to the router or modem?

  Here are a few things to try in waiting for your response:

  Powercycle the network:
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.

  Reset the TCP/IP settings on your PC:
  1. go to your start screen and type CMD.
  2. right-click on the command prompt icon and select run as administrator at the bottom of your screen.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen and type CMD.
  2. right-click on the command prompt icon and select run as administrator at the bottom of your screen.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problem.

  Hope this helps!

• HP Pavilion 14: After connecting a new HD and install Windows 8, unable to connect online

  I downloaded the network drivers for the computer, but no luck, there are 6 devices in Device Manager lacking drivers, any suggestions? would it be a bad NIC?

  Hello:

  I don't see windows 8.1, not W8 drivers.

  Here are the links to the W8.1 drivers you need...

  SMBus Controller: install this driver first, then restart the PC.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  http://ftp.HP.com/pub/SoftPaq/sp73501-74000/sp73543.exe

  Simple PCI communications controller:

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Management Engine Interface allows communication between the Towmi operating system and the Intel Management Engine firmware.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66098.exe

  Network controller:

  This package contains the installation package driver for the controller wireless LAN Realtek RTL8723BE/RTL8188EE in the laptop models running a supported operating system.

  http://ftp.HP.com/pub/SoftPaq/sp77001-77500/sp77436.exe

  ACPI\VEN_HPQ & DEV_6007:

  This package provides the HP 3D Driveguard software (HP ProtectSmart Hard Drive Protection) for the supported models that are running a supported operating system. Software HP 3D Driveguard protects the hard drive by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71811.exe

  ACPI\VEN_INT & DEV_33A0:

  This package provides the driver for Intel Smart Connect technology forsupported models of laptops running a supported operating system. Driver of Smart Connect technology allows system resumefrom mode 'sleep' and update web applications support such asemail. The system enters sleep once the update is complete.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66102.exe

• HP Pavilion g7-2242 sf unable to receive Wifi signals

  I recently downloaded the update of Windows 10, and it installed fine. I then downloaded an updated driver application to update most of my readers for me, a few weeks later I had a few mistakes BSOD_WHEA

  When they stopped, I was unable to receive any Wifi Signal (only Ethernet network), the pilot apparently "disappeared" and it seems that the computer is not able to detect the Wi - Fi card more...

  Any help?

  Hello

  We suggest that you run the network troubleshooter utility on your computer to isolate the problem with your Internet connection. To do this, please follow the steps below:

  1. Press the Windows key + Q on your keyboard.
  2. Type of Control Panel and press ENTER.
  3. In the Control Panel search box, type Troubleshooting , click on the first result.
  4. Choose the network and the Internet and run the troubleshooter.

  If the problem persists, we suggest that you contact the manufacturer of your PC for help on installing the correct driver for your computer.

  Let us know how it goes.

• Unable to connect WiFi: Services.msc maybe?

  I use several wireless receivers.  A PCI card and 3 Wireless USB devices.  Just bought a brand new Netgear N300 yesterday.  The modem is a type of Belkin N.  I can connect on a laptop that is about 3 years old, but not on my desktop.  I think there is something in Services.msc that blocks the WiFi because I have disabled or placed in many manual settings which were not necessary for optimal performance.  I have the usual stuff to automatic configuration wireless, CPP, etc..  I was wondering if there is anything that might be the problem.

  Just diagnosed with the Netgear software and the Ipconfig command.  They both say "Media disconnected" again the USB Wifi adapter is plugged in and sees the router.  Anyone know what "Media disconnected" means?

  First of all, I apologize if my previous answer seemed a bit snippy.

  You live dangerously with no. a / v.

  Your conclusion that it is not the router because everyone can connect is not necessarily correct.  You could still have an incorrect wifi encryption configuration - or this router is completely secure (not need a password to connect)?  What level does the router encryption have established?

  Assuming that you are really sure that you have the correct password (or it is not a), I suppose it is possible that in tweaking things you disabled some (I can't think) service that is required.  Take a look at the site of the Black Viper (link in the previous answer) and compare your list of the services disabled to set up "Safe."  Check the descriptions of all the services that you have disabled which helped Black Viper in its 'Safe' configuration

  You can also take a look at the event viewer (start > run > eventvwr > OK) and see if there are clues here.

  "Media disconnected" for a wireless network adapter that shows the router in the list of available wireless networks almost always means an authentication problem... and almost always he turns an incorrect encryption password.

  Just to be great depth...

  • Make a right-click on the icon of any wireless adapter is active and select Properties.  You should see a screen like this--> http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Connections/Wireless_Network_Connection/Properties/General/Index--2.shtml
  • Click the "Wireless networks" tab and you should see something like this-->http://screenshots.modemhelp.net/screenshots/Windows_XP/Network_Connections/Wireless_Network_Connection/Properties/Wireless_Networks/Index.shtml

    On the tab 'wireless networks:

    -is the box "Use Windows to configure my wireless network" verified or unverified?
    -is the SSID (network name) of the router listed under "preferred networks"?
    -If the SSID of the router is listed, it is a unique name, or is it a default value (for example, "Linksys")?
    -If the SSID is listed, a common method of "starting over" is to «remove "the entry;» OK your way your computer; and then try to connect to the network; all information configuration 'wrong' that has been repeatedly used will have been removed
    -Select the SSID of your router and click on "Properties".

    In the tab "Association":
    -What's in the box "network authentication"?
    -What is in the box of "encryption"?
    -is "the key is provided for me automatically" verified or unverified?

    Under the tab "authentication."
    -is the "Enable IEEE 802. 1 x authentication for this network"checked or unchecked?

• New just installed Windows Vista, unable to connect to wireless networks

  So a few months ago my laptop (HP Pavilion dv6) fell from my bed and the hard drive was messed up, so I'm a computer geek friend to replace my hard drive and put a new operating system on it, he had no activation key. In any case, after I came back it was working fine and I was able to use the internet by connecting to public networks, but every time I would connect to my computer it asked me to activate it. And finally I got so bored with being bugged that I decided to buy a new product key, so that he'd stop bugging me. So I bought a new Windows Vista Home premium operating system and when I received it in the mail, I installed correctly and put in the product key and active it and all that much good but whenever I try to connect to the internet that it says "Windows cannot find wireless networks" and when I click on "Diagnose this problem" he says "this computer does not have an install_ adapter of» configured wireless network. and then it gives me options troubleshooting that brings me at all because most of them consist in some way to update my drivers online, but I can't online my laptop to update! and all the other solutions are just confused. Is there a reason why my "driver" would stop working AFTER you install Windows Vista? Or is there some way I can uninstall the operating system and just use the one I had before? Help please!

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to connect Wifi iPad

  Separated from this thread.

  My iPad is having the same problem and I did nothing to him.

  I update my iPhone 5 in the 8OS but firmware which should

  have no effect on my iPad.

  The iPad has worked with my WiFi DSL without problems before today.

  Is there something in iTunes that are not aware of the user?

  Hi Gbarbur,

  Did you make any changes before the show?

  I can understand the frustration when things don't work as expected.

  This could happen due to wrong setting on the IPad. I suggest you, see the article and follow the suggestions in the article and check if it helps.

  iOS: troubleshooting connections and Wi - Fi networks

  http://support.Apple.com/kb/TS1398

  If you still have questions, I suggest that you post your request in the forum of the IPad.

  Apple support communities

  https://discussions.Apple.com/community/iPad/using_ipad?view=discussions#/?tagSet=1188

  Additional information:

  iPad: basic troubleshooting

  http://support.Apple.com/kb/TS3274

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Unable to connect wifi (limited connectivity)

  Hi friends,

  I use the laptop Lenovo with windows 8. My problem is my pc not connected to wifi even I entered the password. My phone is connected to wifi even without any problem.  But my pc showing that this connection is limited. Please help me to solve this problem as soon as possible.

  Thanks in advance.

  Thank you for your response. But after posting this question here, I found the video in you is a tube that solves the problem. I just reinstalling the driver wifi intel, after that my problem solved automatically.

  In any case once again thanks a lot for your answer.