Pavilion 17: Recovery of Windows 8

Similar Questions

• Example: Pavilion 2226TU G6: creating windows 10 recovery discs

  My pc was pre installed with windows 8, and recovery for Windows 8 discs have already been made. Now, if I update to Windows 10, can I do a set of recovery disks to recover windows 10 later, whenever any problem?

  Hello:

  You can use the creation of a tool of windows 10 image and save them on a portable hard drive or several DVD.

  http://www.tenforums.com/tutorials/5495-system-image-create-Windows-10-a.html

  You will also need to do a Startup Repair flash drive, or you can do a full installation of W10 DVD or player flash from the link below to access the system image that you create.

  https://www.Microsoft.com/en-us/software-download/Windows10

  You can update the image of the system as many times as you want to update (probably best to do it on the laptop hard drive).  It replaces the existing image on a hard drive portable.

• Model number:-n010TX: recovery of windows media 8

  Mr President.

  I had my HP laptop pavilion in November 2013. It came with 8 pre-installed windows. I upgraded Windows 8.1 by March, 2014 and it worked fine for a few weeks, after which, the laptop has detected a hardware failure. I had a HP technician install a pirated windows 8 on my pc and it also gave me a series of DVDs of recovery for windows 8 to be used on a HP or compaq PC.

  It is a set of 3 DVDs 'system recovery' and 1 DVD "valorization of the pilot. The problem starts when I insert the first DVD of system recovery. He didn't autolay not. I checked with control panel and made sure that the "Use AutoPlay for all media and devices" option is checked. But autopsies shows two options: -.

  1 open the folder to view the files, and

  2. don't do anything.

  Now, on the DVD it says: "insert the disk and follow the instructions on the screen. But there is no on-screen instructions.

  I opened the folder and it contains a lot of files with names that I don't understand. Please let me know how I can get the DVD to play automatically.

  Thank you

  Hello

  If I understand correctly, you want to restore the recovery DVDs with you, if so, please go through the link for recovery from recovery disks (Windows 8) below.

  http://support.HP.com/us-en/document/c03489643

  I am an employee of HP, the views expressed here are my personal opinions, not HP.
  Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.
  Click the "Thumbs up" button to the left side of my post to say thank you! ***

• HP PAVILION 15-ab115la: Pavilion 15-ab115la: Downgrade Windows 10

  Hello

  Last week, I bought a new HP Pavilion, it included 10 windows.

  I used to work with Windows 7 and I'would like to downgrade 10 Windows to Windows 7, is it possible? y at - it a disvantages?

  Is useful to mention that I have a legal key for Windows 7.

  Additional, I know that the Windows 10 key is "embedded" in the BIOS, so if I downgrade to Windows 7, then return to Windows 10, the value of the key will not be required because it's inside the BIOS?

  Or should I get the value with a tool?

  Thank you

  ARO

  Jose Herrera

  I used to work with Windows 7 and I'would like to downgrade 10 Windows to Windows 7, is it possible? y at - it a disvantages?

  You're not really downgrading, because Microsoft "Downgrade rights" apply only to Windows Pro/Business. You simply install another version of Windows on your computer. Yes, it's possible! Yes, there are drawbacks... like the lack of support of the HP drivers

  Is useful to mention that I have a legal key for Windows 7.

  You will need to use a key of unused valid PID and COA legally install Windows 7 on your new PC.

  Additional, I know that the Windows 10 key is "embedded" in the BIOS, so if I downgrade to Windows 7, then return to Windows 10, the value of the key will not be required because it's inside the BIOS? Or should I get the value with a tool?

  Using the HP recovery media you create before changing anything on the computer... you should have no problem to return the computer to a factory State, if you wish.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP Pavilion Notebook - 15-p206: Windows 8.1 backup

  My HP pavilion Nooteboom knows the windows 8.1 operating system. This laptop is to have pre defined 24.4 GB as recovery partition.

  Now, I want to take backup of the operating system windows 8.1 in USB key. So I can copy this recovery disk and paste it into the USB key to resume upward.

  Please advise...

  You really need to create usb recovery media.

  In applications, find HP and under HP, you should see the HP recovery media creation utility. Click on it.

  

  Run the utility and follow the directions.

  Once you have created the usb recovery media successfully, you can delete the recovery partition if you feel you must.

• Must regularly restart the DHCP Client - HP Pavilion 500-205 DT - Windows 7

  HP Pavilion 500-205 DT - Windows 7 Home Premium 64 - bit SP1

  Realtek PCIe GBE Family Controller - pilot 7.67.1226.2012

  Bought 3 identical machines for our daycare. Set up the same. All work fine except ONE of them becomes inaccessible periodically (every day more or less) on other computers on our small LAN-to-peer Windows. You can see, but cannot access any shared folder. To access OTHER computers on the local network of it there is NO problem. All 3 machines have the same profile sharing, workgroup, permissions, AV, firewall, all settings. I realized by restarting the computer solved the problem immediately but temporarily. I reduced to restart the DHCP Client service. Do all works well immediately, but temporarily.

  I tried the things:

  Call support HP - not useful at all. It is under warranty.

  IPv6 disabled

  Disabled wireless

  Disabled network card stopcock energy saving

  Definition of recovery CLIENT DHCP on:

  First failure = restarting the Service

  Second failure = restarting the Service

  Subsequent failures = restarting the Service

  Reset Fail Count after = 120

  Restart the Service after = 0

  But again, this is not the case for other machines with the default settings. Nothing works except the Client DHCP service is restarted. Loss of access occurs with or without someone connected or using it. It has happened since its first establishment.

  I don't know if the HP warranty covers the OS loaded at the factory. I don't want to restore the thing and start over. I'm not a Pro, just the guy in the office who did these things, but it seems that the network card may be faulty. I don't know if I can convince a person of first level support phone to have me bring the machine in an approved place.

  Any help greatly appreciated,

  Larry

  HP sends a FedEx box to put the thing in picked it up. I'll mark this resolved thing. Thank you all for your comments!

• HP Pavillion DV6: Recovery of Windows 7

  Hello

  I have a laptop HP Pavilion DV6 comes with windows 7 home Premium a few months ago, I upgraded to windows 10. I would go back on windows 7. Is this possible?

  I tried the HP Recovery Manager, but I get a message saying that rebecca.exe is not approved. Tried to use the tool windows 7 installation support, but since the product key for windows 7 came with the laptop, I get an error before you download media.

  Any help would be appreciated.

  Thank you

  It depends on if the Recovery partition is still on the hard drive.  When you look on the screen 'This PC' does show another named D: Recovery drive?  If it is still in place, you can start recovery - which will reinstall Windows 7 as to how it was when new - and every thing will be back.  Normally, you can start Recovery Manager by pressing F11 immediately by pressing the Start button.  It would be better if you have saved important data to separate media before doing so.

  Another way would be to use the set of diskettes of recovery that you should have when the PC was new.

• HP Pavilion dv6: recovery disks ordered HP but recovery is a FAILURE...

  The hard drive failed on the laptop and I got a replacement after all operations of chkdsk drive, which has been formatted without problem in the initial recovery stage.  Classified into recovery disc for HP Pavilion dv6.  Insert the first disk and everything goes OK.  Load the 2nd disc and everything seems to be OK.  Load the 3rd disc (Supplemental) and everything seems to be OK.  Laptop restarts for the first time, starting Windows starts, starts the Software Installation section.  2nd restart start automatically then start Windows appears.  Additional CD is drive all the time.   The Recovery Manager window appears and indicates "recovery has failed.  Select one of the following buttons:...  Now, I save the log.  The log file is saved as. HP_SSRD_LOG SRD.

  --------------------------------------------------
  [17:47:22.78] enter audit OS Edition...
  ----------------------------------------
  [17:47:22.80] check RStone.ini file to determine the required edition.
  [17:47:22.83] out of checking OS Edition...
  --------------------------------------------------

  --------------------------------------------------
  [17:47:22.85] controls if the upgrade to Windows 7 is required.
  ----------------------------------------
  [17:47:22.86] current edition is [HomeBasic]...
  [17:47:22.86] [start] necessary. Don't need to upgrade...
  [17:47:22.88] [Starter] needed...
  [17:47:26.67] necessary [Starter] edition. But is not the case of the [Starter] OS...
  [17:47:26.67] OS edition upgrade might have a problem...

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7601.17514

  The current edition is:

  Current edition: HomeBasic
  The operation completed successfully.

  Component: TDC Preinstall diagnosis Tools for Windows 7 - TDC
  --------------------------------------------------------------
  Error: no OS flag not set on the device, please use EEPROM to set ~ OS SKU ~ value = 2
  [17:48:11.96] ------------------------------------------------------------------------------------------
  ...
  CTO error condition has been undergoing dtected [update Factory]! ***
  [17:48:11.96] Suggest create PIN-journal and send to TWN PDC NB-PreinPM for further analysis...
  ...
  [17:48:11.97] ------------------------------------------------------------------------------------------

  [17:46:33.77] Start BBOffline.cmd...
  UPDrv = [C:]
  [17:46:33.80] value UIA 951 error Code
  [17:46:34.36] WinPE is 32-bit.
  [17:46:34.36] start [corrections].
  [17:46:34.39] ---------------------------------------------------------------------
  [17:46:34.39] FixUps.cmd...
  [17:46:34.39] create overall progress information...
  [17:46:35.75] complete FixUps.cmd...
  [17:46:35.75] ---------------------------------------------------------------------
  [17:46:35.75] start [Tweaks for SDRD].
  [17:46:35.77] ---------------------------------------------------------------------
  [17:46:35.77] SDRD Tweaks to change the regional settings default user...
  [17:46:35.77] copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES. DLL.
  [17:46:35.89] Run "Dism.exe image:C:-/ Set-SKUIntlDefaults: en - U.S.-image: C:
  [17:46:42.32] ---------------------------------------------------------------------
  [17:46:42.33] start PININST.exe for offline...
  Housing starts [17:46:55.19] [Sleep 10 sec].
  Starting price [17:47:05.28] [creation RStoneFUpdate.INI].
  [17:47:15.00] start [create 1 GB Pagefile for offline].

  Volume in drive C has no label.
  Volume serial number is 4CE2-BE2D

  Directory of C:\system.sav\bbv

  12/26/2014 pagefile.sys 1 073 741 824 17:47
  1 file (s) 1 073 741 824 bytes
  0 44,734,984,192 dir bytes free
  [17:47:15.06] the mark detection.

  [17:47:15.30] ---------------------------------------------------------------------
  [17:47:55.53] Start SysID Check...
  [17:47:55.98] Start Option control code...
  SKU_DEF_COUNTRY = [244]
  SKU_DEF_SYS_LOC = [en]
  ------------------------------
  Reset the country in administrator...
  ------------------------------
  ------------------------------
  Reset the default user countries...
  ------------------------------
  ------------------------------
  System reset located
  ------------------------------

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7601.17514

  Statement of the international settings offline.

  By default system UI language: en-US
  Settings system locale: en-US
  Default time zone: Pacific standard time
  The settings for the default user regional: en-US
  Location: United States (GEOID = 244)
  Active keyboard (s): 0409:00000409
  Keyboard layered driver: PC / AT Enhanced Keyboard (101/102-Key)

  Installed the language (s): en-US
  Type: Fully localized language.

  The operation completed successfully.
  ------------------------------
  Updating the system locale info...
  ------------------------------
  [17:48:06.81] Start PIN Tweaks...
  [17:48:06.85] ---------------------------------------------------------------------
  [17:48:06.85] PIN Tweaks to hide all for BurnBoot PBO and BBV2 on restored image...
  [17:48:06.85] ----------------------------------------
  [17:48:06.85] Tweaks to Unattend.xml of OOBE
  [17:48:06.85] to pick up the right file...
  [17:48:06.85] ----------------------------------------
  [17:48:06.85] rename unattend.org to unattend.or_
  [17:48:07.01] ----------------------------------------
  [17:48:07.01] without light sensor...
  [17:48:07.03] ----------------------------------------
  [17:48:07.04] it is restored by SDRD [SSRD.flg] image...
  [17:48:07.04] ---------------------------------------------------------------------
  [17:48:07.07] Start MIR Tweaks...
  [17:48:07.12] ---------------------------------------------------------------------
  [17:48:07.12] [MIR Tweaks]...
  [17:48:07.12] ---------------------------------------------------------------------
  [17:48:07.15] starting factory updates...
  [17:48:09.10] installation start QFE offline...
  [17:48:11.78] PININST_OFF: PAST...

  [17:48:11.83] Type C:\System.sav\Logs\BBFindEr.log...

  [17:48:11.83] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\PININST_OFF. JOURNAL
  Result = PAST

  [17:48:11.86] Type C:\System.sav\Logs\BBFindEr.log...

  [17:48:11.88] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\BBFIND4QFE. JOURNAL
  [17:48:11.88] FUList.log to check if there are double Desc...
  No duplication.
  [17:48:11.96] duplicated No. Desc is located... PAST.
  [17:48:11.96] there was no update from the factory...

  With all due respect this FYI is a user forum if we don't remember that. If you had problems and did not keep telling them something is wrong and also I and others here have no proof of your experiences. And since you threw the material person else or HP can help you now.

• Product name: Pavilion m6-1061er reinstall Windows on the laptop

  Product name: Pavilion m6-1061er reinstall Windows on the laptop

  Serial number: [personal information deleted]

  Windows7 Home was broken, but the hardware is OK. I have no disk with Windows 7 Home.

  I have the sticker on laptop with symbols

  Product key: XXXXX-XXXXX-XXXXX-XXXXX-XXXXX

  [Personal information]

  My request is: how to install Windows 7?

  Hello

  There are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a very respected source (Digital River).

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Best regards

  DP - K

• HP Pavilion g7 recovery questions

  Hello

  I plan to do a factory reset on my HP Pavilion g7, because the pilots somehow began to disturb, reinstall the original drivers does not resolve this problem, so I have a few questions:

  How do I know that the recovery programs were not damaged, while I won't have problems when the recovery is complete?

  I have updated BIOS with HP Support Manager a month ago, the recovery also moved the original driver for BIOS?

  I can make the recovery of a battery in the laptop or I have to remove and do as the tank adapter?

  How long it takes for this process to be done (approx.)?

  Can I keep recovery (D and HP_TOOLS (E after recovery?))

  This recovery will really put me on the language selection screen, after it's done and instal lall, the pilots and the original software?

  Do I need Internet while doing a recovery?

  Please help me.

  Owner of HP Pavilion g7-1223sm

  PrimoXD wrote:

  Hello

  I plan to do a factory reset on my HP Pavilion g7, because the pilots somehow began to disturb, reinstall the original drivers does not resolve this problem, so I have a few questions:

  How do I know that the recovery programs were not damaged, while I won't have problems when the recovery is complete? Use recovery disk series or usb recovery media that you should have right there.

  I have updated BIOS with HP Support Manager a month ago, the recovery also moved the original driver for BIOS? A recovery will have no effect on the BIOS.

  I can make the recovery of a battery in the laptop or I have to remove and do as the tank adapter? No recoveries with the AC adapter.

  How long it takes for this process to be done (approx.)? Depends on the media you use. If you use a usb recovery media is fast enough. Maybe an hour. If you use recovery DVD, so maybe it will take two hours or more. If you perform a recovery from Windows, you may have one or two hours. 

  Can I keep recovery (D and HP_TOOLS (E after recovery?)) It would be a wise thing to do. Consider the fact that neither score is actually a lot of space on your hard drive.

  This recovery will really put me on the language selection screen, after it's done and instal lall, the pilots and the original software? the recovery will be in the default language for portable computer was shipped with. It will install the drivers, but not necessarily all applications. and then it also depends on the type of recovery you have chosen.

  Do I need Internet while doing a recovery? No.

  Please help me.

  For more information on using System Recovery, Factory Reset and reduces the minimum recovery Image Options click this link. It is worth to read it and decide what kind of recovery that is best suited to your needs.

• Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen

  I have a Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen with a blinking cursor. I ran all the tests start and everything this past. I tried all F8, F9, F10, F11, recovery options with no luck. I tried to start with the ERD Window 7 64 bit I created when I install the laptop. Nothing... I did it with all the disconnected device. No luck. I'm looking for all the options until I re - install windows. I started with the Windows 7 recovery DVD and it reads, but I cancelled the process because it will reformat the hard drive and I expect to work around all the hassels of having settings to reinstall the software, etc.. Any ideas would be welcome.

  Thanks for the reply. I already tried these steps. I created a bootable floppy that I can get the data on the hard drive and am trying to restore windows to the recpvery of the DVD system that I ordered with the computer. Thank you

• HP Pavilion p7-1443 and Windows 7

  Hello

  I just bought the HP Pavilion p7-1443 with Windows 8.  I was wondering if it is possible to replace Windows 8 with Windows 7 on this computer.  Has anyone tried this before?

  Thank you

  Serrano

  Hello:

  It should be doable.

  You can use the drivers of this model that has the same motherboard as the one you have.

  http://h10025.www1.HP.com/ewfrf/WC/Product?CC=US & DLC = in & lang = to & LC = in & Product = 5197676&

• Pavilion 15-n249sl drivers windows 7

  Hi everyone

  I am trying to install Windows 7 ultimate on Pavilion 15-n249sl drivers windows 7 and I have a few problems with the ethernet card, USB, webcam and video output drivers.
  I run recognize many utilities for hardware, but I still don't know the chipset for example, thank you in advance for help

  Spoiler (Highlight to read)

  Hello:

  Here is the link to the Intel 32-bit driver.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & DwnldID = 23638 & lang = eng & OSVersion = Windows % 207% 20 (32-bit) * & DownloadType = drivers

  I'm of Sicilian origin on my mother's side, so I can read some Italian (and some Sicilian too).

  Controller PCI Simple Comms

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5405424 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123657_1%257CswEnvOID%253D4052%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  PCI (card reader) device

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5405424 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125075_1%257CswEnvOID%253D4052%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Unknown:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1 & CC = US & DLC = in & LC = on & os = 4131 & Product = 6818636 & sw_lang =

  You have a great weekend too!

• HP Pavilion 10-f001au: I need driver for HP Pavilion 10 - f001au for Windows 7 64-bit

  Hey well im new here, I can't fo my Pavilion 10-f001au for windows 7 64-bit driver please? Because my Driver CD is gone and I need to reinstal windows because I had some delay here.

  Do you have internet in 10-f001au?

  Touchpad

  http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65643.exe

  Realtek LAN driver (LAN)

  http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65647.exe

  Realtek card reader driver

  http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65644.exe

  AMD graphics driver high definition (HD)

  http://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66817.exe

  Driver Audio Realtek High definition (HD)

  http://ftp.HP.com/pub/SoftPaq/sp65501-66000/sp65645.exe

• The new use of recovery of Windows XP with my q Satellite Pro P300-19?

  I just bought a Satellite Pro P300-19 q with Vista pre-installed. I want to use Windows XP Professional instead and understand that I must use the DVD titled "Product development - Microsoft Windows XP Professional" supplied with the machine. To do this, however, the provided information sheet is not very useful when he says only: «you will have to load this...» »

  My question is: How do I do it from running the disc in the DVD player, just reveals several files which none will get me nowhere?

  Any help would be welcome.

  The recovery of Windows XP product disc contains an image of a Windows XP installation ready with all the drivers and tools.

  Before installing Windows XP, you should burn the Vista recovery disk because if you want to restore Windows Vista you will need this disc. So, you can restore the computer back to wherever it was when you originally received.
  So far as the recovery image (Vista) is only stored on the HARD drive and so you can burn it to a DVD:
  Click on the Toshiba recovery disc creator and insert a blank DVD. Then follow the instructions on the screen. The recovery disk will be created.
  You are now able to boot from this DVD and install Vista with all the drivers and tools (factory settings).

  When you reinstall Windows with a recovery disk, the HARD disk will be reformatted and all data will be lost. This means that as other partitions so backup your data first.

  If you are using Vista it s also able to restore the factory since the HARD drive settings. Therefore, the files are stored in the folder HDDRecovery.
  So, if you want to put your mobile PC, press F8. Then you can see the menu and there advanced boot options, select repair your computer.
  Follow the instructions on the screen and the laptop will also reinstall.
  But don't forget, this (HARD disk recovery) feature is only available with Vista, not XP.

  So if you understand this and burned the Vista recovery disk, you can start to install Windows XP.
  Boot from the XP Recovery disk and follow the instructions on the screen. The installation of Windows XP does not have a lot of time and this procedure is similar to Vista. After installation you also have an installation with all drivers and Toshiba tools but with Windows XP of course.
  This is the content of the Windows XP Recovery disk.