HP Pavillion DV6: Recovery of Windows 7

Similar Questions

• HP Pavillion DV6 - 8.1 Windows upgrade fails on devices to prepare

  I made several attempts to upgrade my HP Pavillion DV6 of Windows 8 6b90eo for windows 8.1, all have failed. A few times I got the 0xC1900101 - 0 x 40017 but also the end not even. The installation fails during the step "Getting Ready devices" and 73%, the screen goes black, but turned on, and nothing happens for a very long time (I let it sit for several hours). I ve read a lot about the problem and I realize that I'm certainly not alone with this problem. I tried several ideas that I found all over the internet, including:

  • Disconnect any external devices
  • Install all updates via Windows Update
  • Install the latest video drivers for my AMD Radeon HD 6770 m
  • I m does not work any program anti-virus except Microsofts own Windows Defender, which I tried to turn it off, with no difference in the result.

  Initially, the machine ran Windows 7, installed by HP. This has been upgraded to Windows 8 by me without any problems. So, I'm not under a version of Windows 8 own but an upgrade. I thought to install a clean version but if I understand the licensing for my requests of version upgrade that I have upgraded from Windows 7 to Windows 8 and activating a clean Windows 8 install fails with my license key. Is this true?

  The WindowsUpdate.log file is empty for the period between the computer restarts during the installation up to the crash to get the loan of devices. There is therefore no clues.

  After a manual stop, after that the installation failed, it restores the previous version of Windows.

  The computer has switchable graphics with Intel HD Graphics 3000 card, which many will report it as a problem. Don't know what to do about that though. Some have commented that I should try to uninstall all videodrivers for AMD and Intel without reboot the machine and then install Windows 8.1, what I tried haven´t. Microsoft recommend it as an alternative? I tried to update the driver but the Intel driver update utility indicates that the installed driver for the HD Graphics 3000 is a personalized by the manufacturer driver and that the driver may not be updated.

  I ve checked with HP and they have not tested to improve the DV6 6b90eo to Windows 8.1 and accordingly recommend to continue running Windows 8. I have a hard time accepting.

  Maybe someone at Microsoft for assistance? Y at - it files of newspapers that I can see and get an understanding of why the update fails? Y at - there anyone out there who have actually managed to upgrade the HP Pavillion DV6 6b90eo to Windows 8.1? If Yes, have you had difficulties, how do you have that solve you, or does the job of upgrading without flaw for you?

  Thank you for your help and comments.

  Hello Robert,.

  Thank you for the update on the question and sorry for a delayed response.

  If you can't update Windows 8.1, I suggest trying the steps by Vivian Samartha responded on April 12, 2014 in the following thread and see if it works for you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/kb2919355-Windows-81-update-fails-800f0092-and/4d4d23a3-695a-4bd4-B340-d2ce9c75919d

  If the problem persists after trying the above steps, I'll ask to follow the steps given by David Williams Dixon in the Blog below.

  Something happened and the 8.1 Windows installation may not be completed. (And now you are bored)

  We know if the steps help you in upgrading the computer to Windows 8.1.

  Kind regards

• HP Pavillion DV6: Updaing for Windows 10 knocks out audio Beats

  Upgrade to Windows 10 and said goodbye to my audio. (souds like mutilated)  Had to reinstall widows 7 and all is well again.  How can I upgrade to Windows 10 and work around this audio problem?

  Hello:

  Because HP does not support your laptop for W10, the only suggestion I can offer is to try this IDT HD audio driver after upgrading.

  This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

  File name: sp63555.exe

  He worked for laptops for some people, 6xxx/7xxx-dv6 and dv7-6xxx/7xxx.

  If yours is older than the document (dv6-2xxx/3xxx/4xxx/5xxx), I don't know if this driver has a chance of working.

• I just want to know if laptop HP Pavillion DV6 of my son will be compatible with Windows 7

  Had to replace the hard drive in the laptop for my son. It has a HP Pavillion DV6. We need to install a new operating system and want to go with Windows 7. It will be compatible?

  Run the Windows Upgrade Advisor
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Download and run the Windows 7 Upgrade Advisor to see if your PC is ready for Windows 7. It scans your hardware, devices, programs for known compatibility issues installed, you gives advice on how to fix any problems found and recommends what to do before upgrade you.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Product key Pavillion DV6 3040: regenerating

  Hi team,

  I use Pavillion DV6 3040 with Win 7, but I had updated my OS Win 8. Please help me to rebuild my windows 7 product key, which is delivered pre installed.

  Thank you

  Muqtadir

  You can buy USB specific to your model of HP recovery and use it to restore the factory OS.
  http://support.HP.com/us-en/document/bph07143

  Contact HP: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  Or order here recovery disks:
  http://www.computersurgeons.com/p-17650-recovery-kit-616563-002-for-HP-model-number-DV6-3040us.aspx

  Or

  http://www.computersurgeons.com/p-21063-recovery-kit-616563-002-for-HP-Pavilion-Entertainment-PC-notebook-model-number-DV6-3040us.aspx

  Concerning

  Visruth

• Pavillion dv6: how to get rid of the sound on hp Pavilion dv6 bar 2010

  I have hp pavillion dv6 with a bar of his touch above the keyboard of 2010. When I turn to the top or down the volume a soundbar appears on the middle of the screen. It's a little bit boring when I'm in a game, because it closes the game when I have it in full screen. How can I get rid of the sound bar

  Hello

  For your model, the sound bar osd is provided by HP MediaSmart SmartMenu.

  You can just uninstall it since entering programs and features or simply to prevent it from running at startup - you can make the later steps.

  Hold down the Windows key and press R. For the run box, type msconfig and press ENTER. In the next window, click on the Startup tab, uncheck the box next to HP MediaSmart SmartMenu and then click apply and then click OK to make the change. Restart the notebookfor this change to take effect.

  Kind regards

  DP - K

• Pavillion DV6 1330 CE: Pavilion DV6 1330 ec CPU upgrade

  Hello.

  I want to upgrade the CPU in my EC of Pavillion DV6 1330. Is it possible to change my Intel Core 2 Duo P8700 with Intel Core 2 Duo T9900, Intel Core 2 Extreme X 9100 or perhaps Intel Core 2 Extreme QX9300 (quad core)? What I need to change the cooling system or the stock is enough?

  My current setup:

  CPU: Intel Core 2 Duo P8700 2, 53GHz

  RAM: 2x2gb DDR3

  GPU: ATI Radeon HD 4650 1 GB

  HARD drive: Samsung EVO 850 SSD

  10 64-bit Windows

  Thanks in advance for the answers.

  Here is the Service Manual:

  Manual

  Intel® Core™ 2 Duo T9900 3.06 GHz with 6 MB of cache L2 and FSB 1066 MHz (FSB)

  Intel® Core™ 2 Duo T9800 2.93 GHz with 6 MB of cache L2 and FSB 1066 MHz (FSB)

  Intel Core 2 Duo T9600 2.80 GHz with 6 MB of cache L2 and FSB 1066 MHz

  Those are your upgrade and options of the foregoing would be a major improvement. The T9800 and T9900 in particular are extremely strong. Equal to 2d plus gen processors Core i5 in my opinion. The market knows that, however, and these processors tend to be difficult to find and expensive. The T9600 is only slightly less powerful and more widely available and cheaper. The "X" model processors are a no-go.

  Let us know if you need more information.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Pavillion dv6: I can't find hp simplepass for my pc. Help, please.

  Hello. I use a hp pavillion dv6 p / n: lw218us #aba the problem is that I had to reset for some reasons. during the process of resetting my simplepass got deleted. No, I can't. Please help me. I'm already suicidal...

  and btw, is there a way that I can return the version that came with it when I bought it in 2013?

  @Xain_Basit

  Depending on the exact model of your laptop, you should be able to use this driver of validity:

  sp58900 validity sensor V4.4.234.0 W8 - W8.1

  It is impossible to know which version of SimplePass you use - depending on what you were using before, one of them will work for you:

  Series 6 (AuthenTec)

  sp63224 HP SimplePass V6.0.100.276 Win7-8

  Series 8 (Softex)

  sp71729 HP SimplePass V8.01.46A 32/64 bit W7 - W10

  Understand that the 8-series is NOT a newer version of the series 6 - here are two completely separate programs and they are not compatible.  Choose one or the other.  If you choose wrong (according to you), you can remove the 'bad' program > reboot > install the other series.

  You must not have installed other HP drivers for Windows 10 - you want to have your drivers HP installed, and THEN you try to process logon Windows native 10 fingerprints, THEN you try to treat SimplePass.

  GENERAL instructions:

  • Create a Restore Point
  • Update your drivers HP for Windows 10 versions of the HP drivers
  • Ensure the Windows Update are up-to-date (unless you have 'deferred' updates to update, updates are automatic)
  • Configure Windows 10 fingerprints fingerprint logon (including the PIN)
  • Restart and sign
  • Install the driver of validity
  • Restart and sign
  • Install your choice of SimplePass
  • Restart and sign

  Help, suggestions and examples:

  HP SimplePass upgrade instructions

  Read the first page: Dragon Document guidelines

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Elitebook840 G2 & Pavillion DV6: Operating systems DVD

  Get, I got my new laptop Elitebook 840 G2. With the laptop has a DVD Windows 8.1 Pro operating system. I was wondering, if I could use this CD to my Windows 7 32 Bit Pavillion DV6 in one 8.1 64-bit windows?

  I was going to save then install in my Pavilion DV6 after reading "for use with HP or Compaq PC license" but did not know if it works or not.

  Hello

  You can use that for a single machine. You can't activate it on the second machine.

  Kind regards.

• HP Pavilion dv6: recovery disks ordered HP but recovery is a FAILURE...

  The hard drive failed on the laptop and I got a replacement after all operations of chkdsk drive, which has been formatted without problem in the initial recovery stage.  Classified into recovery disc for HP Pavilion dv6.  Insert the first disk and everything goes OK.  Load the 2nd disc and everything seems to be OK.  Load the 3rd disc (Supplemental) and everything seems to be OK.  Laptop restarts for the first time, starting Windows starts, starts the Software Installation section.  2nd restart start automatically then start Windows appears.  Additional CD is drive all the time.   The Recovery Manager window appears and indicates "recovery has failed.  Select one of the following buttons:...  Now, I save the log.  The log file is saved as. HP_SSRD_LOG SRD.

  --------------------------------------------------
  [17:47:22.78] enter audit OS Edition...
  ----------------------------------------
  [17:47:22.80] check RStone.ini file to determine the required edition.
  [17:47:22.83] out of checking OS Edition...
  --------------------------------------------------

  --------------------------------------------------
  [17:47:22.85] controls if the upgrade to Windows 7 is required.
  ----------------------------------------
  [17:47:22.86] current edition is [HomeBasic]...
  [17:47:22.86] [start] necessary. Don't need to upgrade...
  [17:47:22.88] [Starter] needed...
  [17:47:26.67] necessary [Starter] edition. But is not the case of the [Starter] OS...
  [17:47:26.67] OS edition upgrade might have a problem...

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7601.17514

  The current edition is:

  Current edition: HomeBasic
  The operation completed successfully.

  Component: TDC Preinstall diagnosis Tools for Windows 7 - TDC
  --------------------------------------------------------------
  Error: no OS flag not set on the device, please use EEPROM to set ~ OS SKU ~ value = 2
  [17:48:11.96] ------------------------------------------------------------------------------------------
  ...
  CTO error condition has been undergoing dtected [update Factory]! ***
  [17:48:11.96] Suggest create PIN-journal and send to TWN PDC NB-PreinPM for further analysis...
  ...
  [17:48:11.97] ------------------------------------------------------------------------------------------

  [17:46:33.77] Start BBOffline.cmd...
  UPDrv = [C:]
  [17:46:33.80] value UIA 951 error Code
  [17:46:34.36] WinPE is 32-bit.
  [17:46:34.36] start [corrections].
  [17:46:34.39] ---------------------------------------------------------------------
  [17:46:34.39] FixUps.cmd...
  [17:46:34.39] create overall progress information...
  [17:46:35.75] complete FixUps.cmd...
  [17:46:35.75] ---------------------------------------------------------------------
  [17:46:35.75] start [Tweaks for SDRD].
  [17:46:35.77] ---------------------------------------------------------------------
  [17:46:35.77] SDRD Tweaks to change the regional settings default user...
  [17:46:35.77] copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES. DLL.
  [17:46:35.89] Run "Dism.exe image:C:-/ Set-SKUIntlDefaults: en - U.S.-image: C:
  [17:46:42.32] ---------------------------------------------------------------------
  [17:46:42.33] start PININST.exe for offline...
  Housing starts [17:46:55.19] [Sleep 10 sec].
  Starting price [17:47:05.28] [creation RStoneFUpdate.INI].
  [17:47:15.00] start [create 1 GB Pagefile for offline].

  Volume in drive C has no label.
  Volume serial number is 4CE2-BE2D

  Directory of C:\system.sav\bbv

  12/26/2014 pagefile.sys 1 073 741 824 17:47
  1 file (s) 1 073 741 824 bytes
  0 44,734,984,192 dir bytes free
  [17:47:15.06] the mark detection.

  [17:47:15.30] ---------------------------------------------------------------------
  [17:47:55.53] Start SysID Check...
  [17:47:55.98] Start Option control code...
  SKU_DEF_COUNTRY = [244]
  SKU_DEF_SYS_LOC = [en]
  ------------------------------
  Reset the country in administrator...
  ------------------------------
  ------------------------------
  Reset the default user countries...
  ------------------------------
  ------------------------------
  System reset located
  ------------------------------

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7601.17514

  Statement of the international settings offline.

  By default system UI language: en-US
  Settings system locale: en-US
  Default time zone: Pacific standard time
  The settings for the default user regional: en-US
  Location: United States (GEOID = 244)
  Active keyboard (s): 0409:00000409
  Keyboard layered driver: PC / AT Enhanced Keyboard (101/102-Key)

  Installed the language (s): en-US
  Type: Fully localized language.

  The operation completed successfully.
  ------------------------------
  Updating the system locale info...
  ------------------------------
  [17:48:06.81] Start PIN Tweaks...
  [17:48:06.85] ---------------------------------------------------------------------
  [17:48:06.85] PIN Tweaks to hide all for BurnBoot PBO and BBV2 on restored image...
  [17:48:06.85] ----------------------------------------
  [17:48:06.85] Tweaks to Unattend.xml of OOBE
  [17:48:06.85] to pick up the right file...
  [17:48:06.85] ----------------------------------------
  [17:48:06.85] rename unattend.org to unattend.or_
  [17:48:07.01] ----------------------------------------
  [17:48:07.01] without light sensor...
  [17:48:07.03] ----------------------------------------
  [17:48:07.04] it is restored by SDRD [SSRD.flg] image...
  [17:48:07.04] ---------------------------------------------------------------------
  [17:48:07.07] Start MIR Tweaks...
  [17:48:07.12] ---------------------------------------------------------------------
  [17:48:07.12] [MIR Tweaks]...
  [17:48:07.12] ---------------------------------------------------------------------
  [17:48:07.15] starting factory updates...
  [17:48:09.10] installation start QFE offline...
  [17:48:11.78] PININST_OFF: PAST...

  [17:48:11.83] Type C:\System.sav\Logs\BBFindEr.log...

  [17:48:11.83] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\PININST_OFF. JOURNAL
  Result = PAST

  [17:48:11.86] Type C:\System.sav\Logs\BBFindEr.log...

  [17:48:11.88] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\BBFIND4QFE. JOURNAL
  [17:48:11.88] FUList.log to check if there are double Desc...
  No duplication.
  [17:48:11.96] duplicated No. Desc is located... PAST.
  [17:48:11.96] there was no update from the factory...

  With all due respect this FYI is a user forum if we don't remember that. If you had problems and did not keep telling them something is wrong and also I and others here have no proof of your experiences. And since you threw the material person else or HP can help you now.

• HP Recovery Partition Windows 7

  Hello

  I have Hp Dv6 2177ca. It is installed with Windows 7, and recently he has been infected with a nonremoveable virus so I had to format the entire hard drive, including the recovery partition drive.

  I have the recovery disk HP where I installed my Windows7, but now there is NO "recovery Partition" (those who use F11).

  Please tell me how I can create this recovery partition?

  I tried to create it by using the recovery in Windows 7 Manager, as follows:

  Term, I typed 'recovery manager' and open the Recovery Manager.

  There is option 'System recovery' where he asked me if I wanted to create a "recovery Partition" and asked that I have inserted "Recovery Disk #1".» When I proceed on this issue, restart the computer and windows is loaded but no recovery partition is created.

  Please help me create a recovery partition.

  Thank you in advance.

  Hmmm... I seemed to work what to do:

  Previously on installation of recovery, I me performing the "System Recovery".

  But then I did the "Factory Reset" and it solved the problem and created the recovery Partition.

• dvd - RW drive HP pavillion dv6 3180ea will write but not read!

  DVD - RW drive hp pavillion dv6 3180ea my laptop has stopped reading all discs.  However, it seems to be able to read and write the DVD-R Virgin

  I tried to diagnose the solution via the HP Support Assistant, without success.  Help!

  Hello

  You are welcome

  Can you let me know what follows.

  1. open windows control panel, open Device Manager, open the CD-ROM/DVD-ROM drives, right click on the device listed here and select Properties.  On the general tab, is there an error code in the device status area and if there is, what is the error code?

  2. What is the full version of the operating system you are using - IE Windows 7 64 bit?

  3. did you eject the drive tray and tried to clean the lens?  If you do not, try cleaning with a piece of soft cotton and check if it makes a difference.

  Kind regards

  DP - K

• Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen

  I have a Pavilion dv6 i3 with Window 7 64-bit. To start the HP logo appears, then I get a black screen with a blinking cursor. I ran all the tests start and everything this past. I tried all F8, F9, F10, F11, recovery options with no luck. I tried to start with the ERD Window 7 64 bit I created when I install the laptop. Nothing... I did it with all the disconnected device. No luck. I'm looking for all the options until I re - install windows. I started with the Windows 7 recovery DVD and it reads, but I cancelled the process because it will reformat the hard drive and I expect to work around all the hassels of having settings to reinstall the software, etc.. Any ideas would be welcome.

  Thanks for the reply. I already tried these steps. I created a bootable floppy that I can get the data on the hard drive and am trying to restore windows to the recpvery of the DVD system that I ordered with the computer. Thank you

• Pavillion DV6 Wireless does not

  The wireless on my HP Pavillion DV6-6135DX no longer works, but apparently only for certain networks (perhaps only networks encrypted, I'm not completely sure of any common point).

  I recently installed a bunch of updates of Windows 7 that I thought could have been part of the problem. I went back to before the updates, wireless still did not work on some networks, then reinstalled and wireless updates did not work again.

  I lived all the troubleshooting of Windows but did not help.

  What could be the problem / what I should try next?

  Thank you.

  EDIT: I also tried to reinstall the latest version of the driver for the network card. This did not help either.

  It seems that I need to first uninstall the network card driver rather than just installing the latest driver.

  I first went to the Device Manager and uninstalled the Realtek driver under network devices and then restarted my computer, allowing Windows to reinstall the driver. Now my wireless seems to work on all networks again.

• Model number:-n010TX: recovery of windows media 8

  Mr President.

  I had my HP laptop pavilion in November 2013. It came with 8 pre-installed windows. I upgraded Windows 8.1 by March, 2014 and it worked fine for a few weeks, after which, the laptop has detected a hardware failure. I had a HP technician install a pirated windows 8 on my pc and it also gave me a series of DVDs of recovery for windows 8 to be used on a HP or compaq PC.

  It is a set of 3 DVDs 'system recovery' and 1 DVD "valorization of the pilot. The problem starts when I insert the first DVD of system recovery. He didn't autolay not. I checked with control panel and made sure that the "Use AutoPlay for all media and devices" option is checked. But autopsies shows two options: -.

  1 open the folder to view the files, and

  2. don't do anything.

  Now, on the DVD it says: "insert the disk and follow the instructions on the screen. But there is no on-screen instructions.

  I opened the folder and it contains a lot of files with names that I don't understand. Please let me know how I can get the DVD to play automatically.

  Thank you

  Hello

  If I understand correctly, you want to restore the recovery DVDs with you, if so, please go through the link for recovery from recovery disks (Windows 8) below.

  http://support.HP.com/us-en/document/c03489643

  I am an employee of HP, the views expressed here are my personal opinions, not HP.
  Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.
  Click the "Thumbs up" button to the left side of my post to say thank you! ***