Pavilion 2299sa g6: no audio device on the laptop

Similar Questions

• No audio device on the laptop

  Hello. Can I have posted this in in the wrong place, but I don't really know what I'm doing when it comes to laptops!

  Recently my laptop is broken (it says summat recently attached a device (which I didn't actually: S)... anyway, I had to wipe everything on my laptop and reinstall Windows everywhere still.) Everything works fine except the noise. When I go to the Control Panel, it says that there is no audio device on my laptop.

  Can someone tell me if there is anything that I can download or purchase for the sound on my laptop please?
  Thank you.
  Natalie.

  p.s. Could keep you things simple cos I don't REALLY know anything about laptops... I'm sorry.

  You must give us a little more information about your problem as your model of laptop, Windows and to this day.
  Did you install the laptop with the Toshiba recovery disc or disc of Microsoft?

  If your laptop has a Realtek sound card check this links:
  http://support.Microsoft.com/kb/835221
  http://support.Microsoft.com/kb/888111

• Missing audio device of the control panel.

  Several days ago, I opened the control panel to troubleshoot an audio device. The Control Panel showed two audio devices:

  1: ATI PNP
  HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1001\5 & B0AB116 & 0 & 0001
  Driver c:\windows\system32\drivers\atihdmi.sys (7.11.0.7703, 114,00 KB (116 736 bytes), 02/09/2010 12:34 AM)
  2: REALTEK PNP
  HDAUDIO\FUNC_01 & VEN_10EC & DEV_0888 & SUBSYS_103C2A92 & REV_1002\4 & 19 19054 & 0 & 0001 c
  Driver c:\windows\system32\drivers\rtkvhd64.sys (6.0.1.6196, 2.37 MB (2 484 072 bytes), 07/09/2010 12:27)

  Both devices are still listed under system information/system/components tools, but:

  At some point during the configuration of the device from Realtek, ATI device disappeared from the control panel. Since then, I have found no way to adjust its properties, much less put on the control panel.

  The only other change observed: formerly the computer sounds internal (startup, error, stop, etc.) remained internal. Now, I can hear them through the external speakers - acceptable but not optimal.

  Any help would be appreciated.

  Milt

  Hello

  Could you post back with the full or part no of your PC model No.  Also, could you confirm the operating system you are using.

  Another thing to check is in the meantime.  Windows Control Panel, open Sound, right-click in an empty area of this window and check "Show disconnected devices" as «Show disabled Devices»  Another thing now appear?

  Kind regards

  DP - K

• Satellite A200 - no audio device after the awakening of the mode 'sleep' or 'putting into hibernation'

  I own a Satellite A200 laptop computer with Windows Vista.

  Sometimes when I put my laptop in 'stand by' mode or 'Hibernate', he wakes up with no audio device. (Error - no installed audio device). The problem is solved by restarting my computer, or by placing it in the back to 'stand by' and turning it back on.

  I reinstalled my OS using the recovery cd - and the exsists yet problem.
  (Version 1.30, Audio bios driver ver. 6.0.1.5374)

  Is this a known problem or is it just my computer? I'm afraid that it is a hardware problem. (The laptop is less then 1 month).

  Thanks (and sorry for my "rusty" English :-()

  Tomer

  Hi guys

  Can you please check this Microsoft article? Maybe this will help.

  http://support.Microsoft.com/kb/929685/en-us

  By the way: is your A200 with or without built-in webcam?

• I can't change "sounds and audio devices" in the Panel

  original title: I can't change "sounds and audio devices" in the control panel after the update my card NVIDIA vidio driver and Microsoft DirectX in my Windows XP SP3 update.  How can I fix it?

  I recently updated my card (NVIDIA GeForce 6800 GT) video driver and Microsoft DirectX after you have experienced a problem with a casual game.  That fixed the problem, but then I noticed that my sound 'e-mail notification' had failed in its original supplied with Windows.  I changed "Sounds and Audio devices", registered, registered as a new regime, etc., and still plays the old default Windows sound.  It was the only noise I had on Windows.  When I check "Sounds and Audio devices", the sound, I have chosen is the one listed, and it does not play when I check, but when the mail arrives, I hear the old Windows by default.  I don't know if the updates, to happen or not, caused only that it took place at the same time.  Thanks for any help you can give.

  Thank you for your suggestions.  It turns out that my e-mail client, "Eudora", had somehow reset the default mode in the Windows sounds.  I forgot that there is a choice to "Be careful" in Eudora Tools.  After I changed it back, it worked perfectly.  Once again, thank you to answer me.

• No Audio device in the audio device properties

  Problem Audio XP

  Here you have a sound problem.  When I open the sounds and Audio Devices Properties on the volume tab, it says "No. Audio Device" and the Volume of the device is grayed out.  I made sure all the drivers were updated to the title of his in the Device Manager.  Note also should not be the sound card since I was able to get clear audio when I boot Ubuntu (dual boot machine).  In addition, under Startup audio component services\services\windows type is set to automatic.  Does anyone have an idea on what setting I'm missing?

  Hi Karl,
  I had an experience with the audio device that all drivers are loaded correctly. Finally, after loading the audio Framework, device package is started.
  Thus,.

  Have you checked the manufacturer as some fixes (may be required) to load to your portable audio device for that matter.

  Chauvet J.

• I need to reinstall my audio devices, it says no audio devices in the control panel

  original title: sound devices

  I need to reinstall my audio devices, it says no audio devices in the control panel

  Visit the website of your PC/Laptop manufacturer, search reference number and download then install specific drivers XP audioo. Alternatively, if you have a CD with the drivers that came with your computer, install it from there.

  See you soon,.

  Jerry

• After you have reinstalled windows xp, I lost my audio devices of the system

  I plugged in a new usb mouse and hub 4way in my computor screen went blue, wgen she is back on I had no control of the mouse. I plugged the old mouse, the screen was frozen. Ishut down and rebooted but nothing works. I reinstalled windows xp butnow I have not any showwing audio device connected. the motherboard is foxcom

  You has not LOST the device if you have installed new XP Windows.  You simply do not have the device for device drivers, Windows XP can actually communicate with the device.

  You will need to download and install all THE drivers for hardware devices.  Motherboard chipset, audio, video, networks, printers, scanners, cameras and so forth.

  "Foxcom" tells us nothing and is only part of the story.  In order to get the drivers, you will need to know each device you have (or at least the make and model of the motherboard or computer as a whole.)

• HP Pavilion dv6 Notebook PC audio problem after the last update of HP

  Hi after I updated my HP Pavilion dv6 Notebook PC, windows 7, core i5 yesterday my sound suddenly stopped working... I tried to restart all my BIOS by default.  go to Device Manager and uninstall my audio and restart to re install automatically, but its does not work...

  I really need help for instructions on how to fix this I am not a computer expert so I need step by step clear instructions!... so please help I really need my computer to be on the right track again coz im using this in school and project...

  Help, please!...

  Click on the link below. Enter your product number as that indicated on the Service tag on the bottom of the laptop (can be under the battery). You can also get the product number by pressing Fn + ESC key. After you enter the PN, click Next, then choose the software & Drivers.On the next page use the menu drop down to select your (probably Windows 7 64-bit) operating system. A list will fill with the drivers. Download & install the latest Audio driver.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  ```````````````````````````````````````

  If still no sound, try a hard reset, works sometimes. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall only the power cord for the first start.

  4. turn on

• Update of Audio devices while the program is running

  Hello

  I want to connect to a device audio all in a labview VI is running. When I do, the audio device does not appear in the list of audio devices. Will there be any node of activeX or another possibility to refresh the audio in labview devices, while a VI is running?

  I use Windows XP and LabVIEW 2010, but I think that an upgrade for 2011 would not solve my problem.

  Hi Angelica,.

  just spoke to a colleague on the issue and we have now resolved. The solution are VI references and call forwarding.

  Take a look at the example in the attachment. The use of this piece of code, the 'get Num Devices' function (as an example for all other functions that you want to use) is reloaded each time it is called, resulting in the numeration of device updated when executing.

  Good luck using it and best regards,

  Benjamin

• "No Audio device" after the on-board video uninstall

  "No Audio device" said "Sound and Audio Devices Properties" Windows XP Pro sp3.

  I think it started when I installed the first graphics card in the PCI-e slot of my Presario SR1913WM mother board.

  Before installing the video card drivers, I took some advice to uninstall integrated video card.

  Now I have no sound.  I have to re - install drivers NVIDIA GeForce 6150 for THE motherboard?

  I tell myself that if I do, I can re - install the Realtek drivers. I uninstalled them think today I could install as I did a few years ago (but now MS Update does not offer me all Realtek drivers).

  And do I have to uninstall the list in Device Manager for ' AMD high definition Audio Device "(I suspect it could be the video card drivers)?

  Here is the record of SR1913WM.

  Hello:

  I noticed on the specifications that you have validated your new video card, it has a HDMI port, correct?

  Well, what happened is that your PC think that you have installed not only a new video card, but also a new card audio and it disabled the embedded video and integrated audio system. Video card you have an audio chip embedded HDMI (AMD HD audio's HDMI).

  So, all you have to do is go into BIOS and find the onboard audio setting.

  It will have the value auto or off.

  Change the setting to "Enabled". Save it by pressing the F10 key at this time here and again when you exit the BIOS (save settings and exit).

  On reboot, everything will be fine again.

  Paul

• WMP11 XP (11.05721.5280) do NOT use the audio device as the default

  I put WMP to use the default device: -.

  WMP\Tools\options\Devices\speakers\properties\sound playback\default live sound and also tried setting to refer directly to the sound card.

  BUT WMP reads through the integrated sound card.

  Other programs for example 2 WMplayer, Quicktime Player, and Cakewalk Home Studio all use properly the default playback device.

  Read in the past THAT WMP has used the default device - stopped doing this a few months back

  The default device is set to the sound card via ControlPanel\Sounds and Audio devices

  Thank you, Meghmala for having responded to my message.

  After validation, I found that WMP plays through the on-board sound. Other programs via the sound card.

  I went through all combinations of card Onboard Sound and sound to the default playback device (read options\Devices\speakers\properties\sound ControlPanel\Sounds and peripheral Audio and WMP.

  WMP always uses the device specified via its Outils\Options.

  It wasn't the behavior that I noted in my post? fixed by restarting?

  I noticed that WMP does not take into account default value specified in the Panel\Sounds control and peripheral Audioeven if control Panel\Sounds and Audio devices specifies "use only default devices"!

  To sum up, I can now put the reading that I need.

  This message can be now closed!

  Thank you.

• Change the default audio device and the recognition of the application

  I'm new to Vista (home premium w/sp2) and I am confused by works the assignment of default device (control_panel-> sounds), specifically the device change with existing applications (running).

  I change frequently between the speakers and the headphones - however, the change of output device is not recognized by running applications, such as iTunes or Firefox and will not be recognized until I have completely quit and restart the application.

  Why?  It is extremely annoying and incoherent other well educated such as Mac OS X platforms.  I would just like to change the default audio output device, on the fly, without the need to restart applications.

  I do something wrong or Vista offers this functionality to the end user?

  Thank you!

  Hello Wyntr,

  Thank you for using the Microsoft answers Forum.

  Currently, the function of switching between audio output devices is carried out manually. To make the selection, you can click the sound icon in the taskbar, then click the button at the bottom of the volume control Mixer. In the properties of the volume, you can click on devices in the upper left corner and select the appropriate device to make it the default for applications open from then on.

  Let us know if this can help, or if you have additional questions on this subject.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion p 15-132nd: unknown device of the HP wireless button driver

  Madam, Sir,

  After you perform a clean installation of Windows, I noticed an unknown device which I can't find drivers for.

  The device has the following hardware id: ACPI\VEN_HPQ & DEV_6001. And I suspect the Wiriless button or something similair.

  Could someone provide me a driver please?

  Best regards

  Jasper Drescher

  Hello:

  You need this driver...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827 & swItemId = ob_124774_1 & swEnvOid = 4158

• Audio problem in the laptop speakers. (Redirected)

  I have Dell Vostro 3546 Since a few days the laptop speakers do not work properly. They produced a sound of frying, but now the sound sucks. But when I attach headphones to the laptop but do not select the headset as device by default, the speakers work perfectly with any aberrations. The speakers work fine then. Please give solution to this.

  Thanks in advance.

  Hello. If you still experience audio problems, please post your question on the portable Audio Panel. Include the operating system you are using (i.e. Windows 10).