Pavilion 25xi: connect the speaker Hp pavilion 25xi

Similar Questions

• Connectivity wireless speaker problem

  I have a laptop ASUS X550C, but it does not recognize the speaker of IBTB14 iWantit. The Bluetooth led on the speaker, but the device does not appear under networks to connect to the speaker. Is this a driver problem? I had no problem to connect the speaker to my cell phone and I have a wireless HP printer connected to my laptop. Any suggestions please?

  Hello

   
  Thanks for posting your query in Microsoft Community.
   
  According to the description of the problem, I understand that the iWantit IBTB14 Bluetooth speaker do not recognize on the computer.
   
  I can understand how frustrating it can be when things do not work as expected.
   
  The probable cause of this problem could be due to the problem of drivers.
   
  To better understand this issue, I would like to know the following information:
   
  1. have you installed the latest compatible drivers Windows 8 for the iWantit IBTB14 speakers?
  2. are you able to see the device recognized by Device Manager > other devices?
  3. What is the brand and model of the computer?

  I suggest that you follow the full article below and check if she helps make you Bluetooth speakers will recognize on the computer.

   
  Why isn't Windows find my Bluetooth or other wireless device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device
   
  Hope this information helps, just reply to the State of the question and the information needed to get help.

• HP Pavilion dv6626us needs special support to connect the HDD and I have no

  Laptop HP Pavilion dv6626us

  For American models, support is required to connect the SATA hard drive.

  This support is available?   Or hard drives for this laptop specially designed with an unusual sata connector?

  (Specifications for that mobile say the original hard drive is SATA 1.5 speed.)

  I don't have the original hard drive or the media.
  I would use a regular laptop sata drive with this computer.

  HP sells this article: 451862-001

  (Description of HP is below)

  Form factor 160GB SATA drive hard - 5 400 rpm, 2.5 in., 9.5 mm thick - with mounting flange for US models ONLY!

  (HP wants a lot of money for this drive - I hope that there are other options).

  Can you help me find a support or tell me what are my options?

  Thank you for your help.

  Hi, Roger:

  What are all the parts you need...

  http://www.eBay.com/ITM/hard-drive-HDD-caddy-for-HP-Compaq-V6000-DV9000-dv6000-series-connector-screw-/360672709872?PT=LH_DefaultDomain_0&var=&hash=item53f9c4ccf0

  You can buy just the connector on the HARD drive separately at the best prices if you have the caddy and screws.

  http://www.eBay.com/ITM/new-hard-drive-connector-for-HP-Pavilion-dv6000-DV9000-V6000-Series-SATA-/221262856327?PT=US_Drive_Bay_Caddies&hash=item33844b4087

• Have HP Pavilion dv2500, won, t turn on. When you connect the power supply blinks blue.

  Have HP Pavilion laptop dv2500, p/n kn997ua #aba, does not illuminate. When you connect the power supply blinks blue.

  Now you can take the laptop at best buy or Wal-Mart and get them to plug a power cord. This will give you an idea if you need to buy a power cord or not.

  Again, you can always buy the power supply cord and if it does not return.

  THX

• Pavilion 23tm - connect the speakers but connection problem

  I have a Pavilion 23tm connected to an Asus S550C laptop. I did not like speakers of the flag so I wanted to connect a pair of Bose multimedia speakers.

  To use the speakers, I can't use the HDMI cable to connect the monitor to the laptop but would need to use DVI monitor. The problem is that the laptop is not a DVI input (it has VGA) and the monitor does not have a VGA input.

  Is it possible to bypass the monitor speakers by using the HDMI connection?

  Or what should I do?

  DOH! Figured it out. Is there an easy way to disable the speakers to the monitor using the software.

• just bought HP Pavilion 23xi monitor, but not sound. It is based in the speaker?

  just bought HP Pavilion 23xi monitor, but not sound. It is based in the speaker? or any HP monitor built in speaker?

  Hello

  The following link shows its specifications:

  http://WWW8.HP.com/emea_africa/en/products/monitors/product-detail.html?OID=5328978#! tab features =

  No speaker. Please try the following Nice monitor:

  http://store.HP.com/webapp/WCS/stores/servlet/us/en/MDP/accessories-88342--1/HP-Pavilion-touch-monitors--1

  Kind regards.

• Desktop HP Pavillion Mini: unify dongle that connects the wireless keyboard and mouse on the HP Pavilion Mini Office

  I bought the product online at Amazon.com. I lost the unifying dongle that connects the keyboard and mouse wireless for the mini PC. No knowledge of a store selling the usb dongle online in the USA? Here is the data on the area where the mouse: model number: MG-1451 / 1452-RG, country of origin: China, identification number of the KCC: IPMPC-CRY-HPK-MG-1451 and IPMPC-CRY-HPK-RG-1452. Help, please. Thank you.

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.
  If you are unfamiliar with works as a private of the Forum messages, this post has instructions.
  http://h30434.www3.HP.com/T5/first-time-here-learn-how-to-post-and-more/how-to-check-your-messages/TD-p/3547355

• HP Pavilion model DV6 key volume, mute the speaker and wireless no longer works

  As by subject heading, I am unable to use the control keys to change the volume, cut the speakers etc. I was not able to find a way to restore these functions. Does anyone have the answer?

  See you soon

  @alwend

  Hello

  Do a hard reset:

  1 disconnect all devices and remove all USB devices and multimedia cards.
  2 disconnect the power adapter, remove the battery and then press in and hold the button for at least 1 minute.
  3 reconnect the power adapter (do not connect the battery), press the power button and check is your problem is resolved or not.

• iPhone 5 s to connect with blue tooth in the car for hands-free calling does not connect to the speaker, it works very well with the iPhone 5. How to solve this problem?

  IPhone 5 IOS 9.2 (13 c 75) I can log in my car with Blue Tooth to make phone calls, but it does not connect to the speaker. To establish the connection with the car, the procedure has been completed correctly. With the iPhone 5 it works perfectly correct.

  How to solve this problem? Is there someone who has the same problem?

  Howdy,

  Thank you for using communities Support from Apple.

  I see you try to get your iPhone to interface with the stereo in your car via Bluetooth.  For setting this up, please follow the steps below.

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon.

• Sound in the speaker, while the connected headphones?

  Hi I have a question I would like to know if it is normal when I connected the headphones, listening to music to incoming calls can be heard on the speaker and headphones, but sound is low...

  It's normal

• Connect the USB cable on my 5510e-all-in-one wireless HP Photosmart printer

  Need me 15 minutes to print a page using my network wireless at home. I decided to connect the printer with a USB cable, but the installation of HP - written installation guide - instructions only show the USB wireless method. I already bought a SPEAKER cable so I'm readt to go one time that I get help. My laptop, that I intend to connect is a dp4 Pavilion from HP with Vista. Thank you.

  Hi there billham68 and welcome to the printer HP consumer Forums.

  Here is a link that should help you in the accomplishment of the task at hand.

  Installation of the software of the printer in Windows for a USB cable connection

  http://support.HP.com/us-en/document/c03521864

• No sound after you connect the headphones.

  I have a pavilion dv6 laptop.  I have a headset that I want to use for the games, but I can't hear sound through them.  When I do my helmet of communication to the default device it doesn't let me.

  Hello Jack,.

  I certainly understand the inconvenience that you cross.

  It is possible that this problem would have occurred due to some incorrect settings or because of an incompatible or corrupted audio drivers.

  Important: Make sure that your headphones are not connected to the line (headphone) jack of your sound card or computer (unless you want to be listening with headphones rather than speakers). When you connect in the headphones, most computers automatically cut the sound to the speakers. Ensure that the headset is completely and firmly inserted into the correct socket. Plug in the headphones and see if the same appears in Device Manager.

  In order to understand the issue more clearly, I would ask that kindly provide me with the following information.

  1. Have you tried plugging in external speakers or any other helmet and checked if you are able to hear the audio?
  2. You are able to get the sound on your laptop's built-in speakers?

  If you are not able to hear the audio on the built-in speakers or other external speakers or any other headset, I would suggest trying the following methods and check if it helps.

  Method 1:

  Open the hardware and devices troubleshooter.

  Note: If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  If the problem persists, please follow method 2.

  Method 2:

  Check with the volume controls. Please follow the steps below and check if it helps.

  (a) right click on the speaker icon in the taskbar, then select volume control options.
  (b) check on "all devices evolving sound.
  (c) make sure that you have "Default uncontrolled communication device".
  (d) place a check on the speakers and headphones. Click on apply and OK.

  If the problem persists, follow method 3.

  Method 3:

  This occurs when you have the speakers, by default. We need to put the headset as default. Please follow the steps below and check if it helps.

  • Exercise the functions mentioned below to set the speakers as default.

  • Click Start and click on Control Panel.

  • Click sound, and then a new window will open.

  • In the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.

  • Now, check if the headset is listed there and right-click on it and choose activate.

  • To highlight this helmet and click "set as default".

  Also try to install the latest drivers from the chipset in the system and check if it helps.

  If the problem persists, follow method 4

  Method 4:

  I suggest you to refer to the procedure described in the article below and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.

  I hope this information is useful.

  If the problem persists, you can write to us and we will be happy to help you further.

  Thank you

• How to connect the cables to an AMD Radeon HD 7450 video card for two monitors individual work?

  I have a HP Pavilion p6-2360eo with the video card Radeon 7450 connected to a monitor of 23xi Pavilion.

  Now, I want to add a monitor of 23xi more, but I do not understand how to connect the cables to the video card to get two logical screen (different views on each monitor)

  Supposedly this monitor can connect to the video card, you have the HDMI connection.  Assuming that the first monitor is connected via DVI, then try a HDMI cable to the second.  I got this from the description of the video card on THIS page.

  Support up to two displays at the same time in these configurations: DVI, HDMI and VGA + HDMI (using the included adapter cable)

• request to connect the fingerprint reader fingerprint digital persona

  Product name-pavilion dv4 1411TU

  Operating system-windows 7

  I upgraded from windows vista to windows 7.

  Now when I tried to use app digital persona. It is required to connect the fingerprint from the recovery disk reader, but I don't have a recovery disk.

  Help me please if anyone can.

  In my first post, I linked to a fingerprint reader driver.  I included the link in the word "here".  What I am asking is for you to run this installation for the driver and let me know what happens with it.  I am sure that the pilot when it was originally installed does not for some reason any and that one of the strangers/other devices is the fingerprint reader.  As the status message on other devices, the drivers for them are not installed.  If one of them is the fingerprint reader, then by installing the driver that I linked should restore the fingerprint reader.

  Here's the direct link for your convenience.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-75356-1&cc=us&DLC=en&LC=en&OS=4063&product=3994763&sw_lang=

  Let me know what happens.

• Windows 7 and bios sees not the hard drive, but when I connect the hard drive to the USB with an adapter, I see directories and files

  Please, I need pc

  Original title: windows 7 and bios does not see the hard drive. but when I connect the hard drive to the USB with an adapter, I see directories and files... Ive a hp Pavilion, what to do?

  Check the BIOS for hard drive setting.

  Make sure that you do not connect the drive to a SATA/RAID port.

  Old IDE drives - check the jumper on the drive (use "Cable Select" as a starting point), the BIOS must also be set in legacy/compatibility/IDE mode. Note: If you currently use the AHCI mode, then switch to IDE mode may cause Windows to boot.

  J W Stuart: http://www.pagestart.com