Pavilion 500-324: loss of audio

Similar Questions

• Pavilion 500-336: updated drivers audio HP Pavilion 500-336

  Here's the audio that I have on my computer: IDT 92HD65C

  Looking at the Device Manager, I see that the driver date is 07/11/2013.  Where can I find the updated drivers for this?

  The version of the driver I have right now is 6.10.6496.0

  Is there still a good reason do not update the audio drivers?

  Hello:

  The audio works fine now?

  If so, I would not update the driver.  Many problems with W10 and IDT audio.

  There is an audio driver IDT W10 on your PC support page if the Beats Audio doesn't work properly or not at all.

  6.10.6504.0 Rev.A

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-500-300-desktop-PC-series/6879020/model/7127002

• Pavilion 500-130ed documentation, specifically audio hardware

  Hi all

  I own a HP Pavilion 500-130ed (since Dec 2013), with Windows 8, 64-bit.

  So far, I am very satisfied with its performance, but the documentation (on the material of the HP Pavilion 500-130ed) is rather sparse. The specifications refer to 'High Definition Audio 7.1'.

  What I don't understand is how can I use 6 channels, since there are IN, a MIC IN and LINE OUTPUT (a blue, green and pink connector) on the back and a microphone and speakers to the front connector.

  Anyone can shed light on this issue? Is it possible to actually make the 7.1 configuration possible? (For people who are more technical than me; The PNP device ID is HDAUDIO\FUNC_01 & VEN_111D & DEV_76F3 & SUBSYS_103C2AF7 & REV_1002\4 & 2DCAAFFF & 0 & 0001)

  See you soon,.

  Sando

  Sando, welcome to the forum.

  According to the specifications, the built-in sound is 5.1.  Look at the section titled "Sound/Audio".  Here's a guide to help you with your problem.  It's for Win 7, but I do not think that the BONE has made a difference.  Read it carefully and it should help you.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

• Pavilion 500 215 el: audio problem Windows 10 anniversary update

  I have an audio problem, then before moving to Windows 10 or the update of the anniversary of the audio working properly after the update I noticed immediately that the sound is distorted or "crunches".
  I haven't identified the problem because it's random, very often and it's very annoying, my sound system is its IDT DTS + I tried to reinstall the drivers with the latest version but some of the problem persists...
  Only, I noticed that the problem is more 'feel' when the bass setting is higher or when I change the audio setting to my taste.
  I ask you to help also became very boring because without my custom settings is really horrible!
  Thank you.
  Sorry for the English, but this isn't my mother tongue, I used google translator.

  Hi there @Alexcpp,

  Welcome to the Forums of HP Support!  I understand that, after the update of Windows 10 anniversary, you had some sound problems.  I'm happy to give you a helping hand with this.

  Check the support page for your model of HP Pavilion 500-215el desktop PC, there don't seem to be updated drivers, and you have already tried to reinstall existing ones.

  You can always try to use the HP Support Assistant, HP PCs - using HP Support Assistant (Windows 10, 8, 7) to see if there is a driver available that is not displayed on the support page. It is unlikely, but there is always a chance that the page has not yet updated.

  Another possibility is to make some adjustments on your system, just in case there is another driver or software that interferes with the audio, which could cause problems of lag. You can try the search, even if these: computers HP - computer is slow (10 Windows), HP - slow Internet troubleshooting (10, 8 Windows) computers.  They are never a waste of time because often there is something that could help the overall performance of the system.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP Pavilion 500-314: IDT High Definition Audio works do not (HP Pavilion 500-314)

  Hello.  I have a HP Pavilion 500-314.  It works on Windows 10.  My audio worked fine until I had to reset the computer after my computer went into a loop of "prepare the AutoFix.  Once I reset the computer, there was an 'x' next to the small speaker icon in the lower right corner.  When I move my mouse over the "speaker" icon, he says "no speakers or headphones are connected.  It drives me crazy that the other posts about the IDT High Definition Audio did not work.   I would appreciate a quick response.  Thank you for your time.

  Shayna - Ghram-Kaiser

  Hello:

  Given that I don't know what other posts read you about it, what works for most forum members is to install the audio driver IDT W8.1 support page and the driver of your PC.

  This package provides the Audio IDT high definition (HD) to support of office models that are running an operating system supported. -Provides the models of desktop audio driver version and supported operating systems.

  File name: sp65946.exe

  If you have already done this and it has not resolved the problem, unfortunately I don't have any other suggestions for you to try.

• Missing drivers for the new installation of XP SP 3 on HP Pavilion 500-202eo

  Hello.

  So I tried to make XP SP 3 to work on my new desktop HP Pavilion 500-202eo. I have partioned the disk in two and was able to install and modify Windows 7 on the other partition, largely with the support of the HP drivers for my model successfully. However I have not found any support for XP drivers for this model, or any other similar models in the 500 series with APU AMD A6 material - 6400 k Radeon HD graphics card. Installing XP went well, but I'm not having any sound, internet or USB 3 support options. In Device Manager, the following components are marked in yellow with the error code 28:

  Audio device on High Definition Bus Audio

  Ethernet controller

  Network controller

  SM Bus controller

  USB controller Universal Serial Bus

  Video controller VGA compatible

  I tried to install the drivers Realtek for XP at least addressing the absence of sound, but it doesn't seem to make a difference, and when I point the Add Wizard of material on file with the drivers Realtek he says that it cannot find the correct drivers. You have any suggestions where I can find the software needed?

  Hello:

  I doubt that you will be able to do all this work, but that's...

  Your PC has the IDT audio controller so the Realtek audio drivers do not work.

  First install the AMD chipset driver and restart. You want the first file in the list.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%20XP%20-%20Professional/home & RenderOnServer = true

  Graphics: See if this driver works...

  http://support.AMD.com/en-us/download/desktop?OS=Windows%20XP%20-%20Professional/home & RenderOnServer = true

  Ethernet: DL and install the driver Windows of the 3rd group of ethernet cards (pilots AR816X QCA817X family). It would be the last driver in the section.

  http://www.QCA.Qualcomm.com/resources/driverdownloads/

  Try this driver for the wireless card:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5229457 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118499_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Audio: See if it works...

  Scroll down to the bottom of page to:
  
  IDT_HD_Audio_6469_xp_win7_win8.zip

  http://www.driversguru.com/HardwareID-HDAudio---FUNC_01-_-VEN_111D-_-DEV_76D9-_-SUBSYS_103C3387

  All audio drivers it try also.

  If the chipset driver above does not install the smbus controller, I enclose the smbus controller below in attachments driver files.  Download and unzip the file.

  Go to Device Manager and click on the smbus controller device.  Click the driver tab.  Click on set to update driver, and then select manual search method.  Select disk, and then locate the file you unzipped\SMBUSamd

• Screen on HP Pavilion 500 DVI output

  Okay, so I recently got a HP Pavilion 500.  Works great, etc.  I have a monitor Samsung that I use on it which accepts VGA and HDMI inputs.  The Pavilion is not an HDMI output to display, but he seems to have a DVI output.  My question is, after looking in the DVI-HDMI cords, there seems to be a lot of variance cost of cord, so put guard on this kind of DVI output jack is used.  In particular, I'm trying to figure out if this is a DVI - I or DVI - D output jack.  Will be all old DVI-HDMI cable work?  I would be better to get a new video card with HDMI output, if that's what I'm looking for?  Help please!

  Hello

  Pavilion 500 is a series of many models. Sounds like your machine has the following ports on the back:

  Figure 6: Rear i/o panel

  

  1 USB 2.0: 2
  2 - S/PDIF-optical output port
  3 VGA
  4 - DVI - D
  5 LAN
  6 USB 2.0: 2
  7 USB 3.0: 2
  8. audio: Port central/subwoofer (yellow-orange)
  9. audio: Rear Speaker Out port (black)
  10. audio: side Speaker Out port (gray)
  11. audio: line (light blue) port
  12. audio: output line port (lime)
  13. audio: Microphone (Pink) Port

• Must regularly restart the DHCP Client - HP Pavilion 500-205 DT - Windows 7

  HP Pavilion 500-205 DT - Windows 7 Home Premium 64 - bit SP1

  Realtek PCIe GBE Family Controller - pilot 7.67.1226.2012

  Bought 3 identical machines for our daycare. Set up the same. All work fine except ONE of them becomes inaccessible periodically (every day more or less) on other computers on our small LAN-to-peer Windows. You can see, but cannot access any shared folder. To access OTHER computers on the local network of it there is NO problem. All 3 machines have the same profile sharing, workgroup, permissions, AV, firewall, all settings. I realized by restarting the computer solved the problem immediately but temporarily. I reduced to restart the DHCP Client service. Do all works well immediately, but temporarily.

  I tried the things:

  Call support HP - not useful at all. It is under warranty.

  IPv6 disabled

  Disabled wireless

  Disabled network card stopcock energy saving

  Definition of recovery CLIENT DHCP on:

  First failure = restarting the Service

  Second failure = restarting the Service

  Subsequent failures = restarting the Service

  Reset Fail Count after = 120

  Restart the Service after = 0

  But again, this is not the case for other machines with the default settings. Nothing works except the Client DHCP service is restarted. Loss of access occurs with or without someone connected or using it. It has happened since its first establishment.

  I don't know if the HP warranty covers the OS loaded at the factory. I don't want to restore the thing and start over. I'm not a Pro, just the guy in the office who did these things, but it seems that the network card may be faulty. I don't know if I can convince a person of first level support phone to have me bring the machine in an approved place.

  Any help greatly appreciated,

  Larry

  HP sends a FedEx box to put the thing in picked it up. I'll mark this resolved thing. Thank you all for your comments!

• HP Pavilion 500-164 playing through my TV station

  My HP Pavilion 500-164 is not an HDMI Jack on the back of the office.  But she has a VGA socket.  I plugged a VGA cable into my office and my television.  But don't you computer desktop on my TV screen.  Nothing else.  I have a HDMI cable.  Should I get a VGA to HDMI?

  You computer has the following connections;

  

  3 - VGA           4 - DVI-D           12 - audio: output port (lime) line

  I suggest to use a HDMI-DVI cable and a mini plug cable stereo 1/8 "to connect your computer to HDTV. Alternatively, you can use a VGA cable, but theoretically, the image will be of inferior quality.

  See examples of Amazon.com (RadioShack.com would not work);

  HDMI-DVI = http://www.amazon.com/Cable-Matters-Rated-Speed-DVI-D/dp/B004CBDY42/ref=sr_1_2?ie=UTF8&qid=1394162409&sr=8-2&keywords=hdmi-to-dvi+cable

  mini plug stereo 1/8 "= http://www.amazon.com/Gilmour-3-5mm-8-Inch-6-Feet-Stereo/dp/B000NO7CIG/ref=sr_1_13?s=audio-video-accessories&ie=UTF8&qid=1394162719&sr=1-13&keywords=stereo+1%2F8+inch+cable "

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• No sound on Pavilion 500-118

  Set up a HP Pavilion 500-118, for which I had updated the OS to Win 8.1 late yesterday. I went on HP and NVIDIA sites to make sure I had the latest drivers installed (IDT, NVIDIA). Connected to the monitor (HDMI) on the video card (GEForce GT 635) HDMI port, still no sound. Do I need to have an external speaker for audio playback?

  Hello:

  You should not need a set of external speakers if your monitor has built-in speakers.

  If it isn't then Yes, you will need to connect speakers to it somehow.

  I would use a DVI cable to connect the monitor if it is not from the built-in speakers and connect a pair of speakers to the audio Jack on the back of your PC.

  Normally, you use an HDMI cable to connect the PC to a TV.

• HP pavilion 500-003 has drivers windows 7

  I just want to know why there is no driver file for Windows 7 by using the HP Pavilion 500-003. I recently bought a new computer with Windows 8 pre-installed on it. I don't like Windows 8 and want to go back to Windows 7, as some programs that I use on another computer in Windows 7 are not compatible with Windows 8

  Hello:

  The reason why there is only Windows 8 drivers available for your model is that HP only supports PC operations for older windows operating systems.

  But be of good cheer, because you should be able to get W7 work properly on your model.

  First of all, make your recovery W8 discs set before installing W7 as the recovery partition/Manager no longer works after installing W7.

  There is a different mother Jasmine card of this model where most drivers W7 x 74 drivers should also work on your.  Certainly the drivers Chipset, Audio and network (contained in section original drivers).

  DO NOT USE ANY BIOS OR FIRMWARE FROM THIS LINK FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5231528#N506

  The driver may not work because of the other processor that your model has vice one of the link above.

  If the video driver of the PC above does not work I would like to install the graphics driver from the link below:

  http://support.AMD.com/us/gpudownload/Windows/pages/radeonaiw_win8-64.aspx

• HP pavilion 500-141ea

  This is probably going to sound like a stupid question as im new to this, but I just baught HP pavilion 500-141ea and I leave there speakers play sounds, but I can't hear anything? I saw that it is said

  Audio: High Definition Audio 7.1 this means just the sound of reading or am I just stupid and it doesn't have speakers built in?

  Hello

  Your PC turn has no built-in speakers, but you can easily get a set of any computer store (or use a screen that has built in speakers).

  Best regards

  DP - K

• Necessary drivers for HP Pavilion 500-267c Windows 7 Professional 32-bit

  Hello

  I upgraded my HP Pavilion 500-267c windows 7 Home premium 64-bit windows 7 Professional 32-bit.  I need all drivers of base.  I couldn't find anywhere for HP pavilion 500-267C windows 7 32 bit prof.  Help, please!

  Drivers for Ethernet controller network controller, device PCI Simple controller PCI Communications, audio, graphics, etc.

  Your help is greatly appreciated... Thank you in advance...

  Daniel.

  Hi, Daniel:

  There is no 32-bit support for your model.

  You have to experiment with the drivers of business models and of drivers from the Internet sites of the Lim component material.

  You can try these for starters:

  1 chipset driver. First, install and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

  2 the graphics driver.

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23638&lang=eng&OSVersion=Windows%207%20(32-bit) * & DownloadType = 0a % 09% 09% 09% 09% 09% 09% 09Drivers % 0 a 09 09% 09% 09% 09% 09

  3. audio. This one, I'm not sure, and you never have the audio to work (try to update the Device Manager and the Auto search box once you can connect to the internet).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=19282&keyword=IDT&DownloadType=drivers&lang=eng

  Network: Download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Wireless:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128686-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0007

  PCI Simple Comms:

  Try windows update of the device.

  USB 3.0:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3467&DwnldID=22824&keyword=USB+3.0&lang=eng

• Pavilion 500 - 200 t: the proccessor upgrade

  I just upgraded memory of my desktop HP pavilion 500-200 t CTO at max (16 GB), I was wondering if I could upgrade my processor or is it 'fixed' to the motherboard?

  Hi @deerpark243,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have questions about upgrades of the processor. I'll be happy to help you.

  First the CPU and does not set on the motherboard.

  Please refer to the motherboard, (Memphis-S) sheet.

  To half way down you will see "information update processor.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• HP Pavilion 500-297c: Boot failure now need to recoversystem

  My Pavilion 500-297c will not start.   All initial tests HD pass ok.   I am running an extended test.   Resetting the system w/maintain files fails.

  I guess even a hard disk failure.   I purchase and install a new HD.  The system came with Windows 8, which has since been upgraded to Windows 10.

  So, I'm going to need some kind of bootable recovery disk HP.  No idea how to get a CD or bootable USB drive to restore the system to a bootable state?

  Also, given that the current hard drive always seems to work at least in part, I hope to set it up as a second drive on the system once I get the new HD installed.  What is the best way to try that?

  > No idea how to get a CD or bootable USB drive to restore the system to a bootable state?

  Because Windows 10 _was_ installed on your computer, a "fingerprint" of your computer is registered with Microsoft.

  This 'fingerprint' allows you to download Windows 10, on any computer and create a bootable DVD that can be used on your computer, without having to enter a 25-character license key.

  Reference: https://www.microsoft.com/en-us/software-download/windows10

  There is no need to wait for HP to courier-ship anything for you.

  Tip: buy a new disk drive and install, remove your current hard drive.

  Install Windows 10 on the new drive and then attach the old drive as a "slave."

  and copy all your files to it on the new drive.