Pavilion 500 - 410a: updated HP pavilion 500-410a?

Similar Questions

• Pavilion 500-336: updated drivers audio HP Pavilion 500-336

  Here's the audio that I have on my computer: IDT 92HD65C

  Looking at the Device Manager, I see that the driver date is 07/11/2013.  Where can I find the updated drivers for this?

  The version of the driver I have right now is 6.10.6496.0

  Is there still a good reason do not update the audio drivers?

  Hello:

  The audio works fine now?

  If so, I would not update the driver.  Many problems with W10 and IDT audio.

  There is an audio driver IDT W10 on your PC support page if the Beats Audio doesn't work properly or not at all.

  6.10.6504.0 Rev.A

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-500-300-desktop-PC-series/6879020/model/7127002

• Pavilion 500 215 el: audio problem Windows 10 anniversary update

  I have an audio problem, then before moving to Windows 10 or the update of the anniversary of the audio working properly after the update I noticed immediately that the sound is distorted or "crunches".
  I haven't identified the problem because it's random, very often and it's very annoying, my sound system is its IDT DTS + I tried to reinstall the drivers with the latest version but some of the problem persists...
  Only, I noticed that the problem is more 'feel' when the bass setting is higher or when I change the audio setting to my taste.
  I ask you to help also became very boring because without my custom settings is really horrible!
  Thank you.
  Sorry for the English, but this isn't my mother tongue, I used google translator.

  Hi there @Alexcpp,

  Welcome to the Forums of HP Support!  I understand that, after the update of Windows 10 anniversary, you had some sound problems.  I'm happy to give you a helping hand with this.

  Check the support page for your model of HP Pavilion 500-215el desktop PC, there don't seem to be updated drivers, and you have already tried to reinstall existing ones.

  You can always try to use the HP Support Assistant, HP PCs - using HP Support Assistant (Windows 10, 8, 7) to see if there is a driver available that is not displayed on the support page. It is unlikely, but there is always a chance that the page has not yet updated.

  Another possibility is to make some adjustments on your system, just in case there is another driver or software that interferes with the audio, which could cause problems of lag. You can try the search, even if these: computers HP - computer is slow (10 Windows), HP - slow Internet troubleshooting (10, 8 Windows) computers.  They are never a waste of time because often there is something that could help the overall performance of the system.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP Pavilion 500-141ea: which recommended update BIOS to use?

  I have desktop PC HP Pavilion 500-141ea, bought 2014.03.27 not produce. D7D35EA #ABU.

  Manu of motherboard: MSI, model: 2AE0 (P0). Current BIOS is what FRIEND 80.35 dated the 2013.07.10

  Win 10 (64-bit)

  Online support suggests that this office should be updated to versions...

  (1) update BIOS of desktop PC for the consumer HP Rev.A 80.52 (SSID family ROM 2AE0) 5.1 MB 12 November 2015

  (2) HP Desktop system BIOS Update for the models of PC PC 2013 HP Pavilion 500 - axx (with a ROMA 2AE0 family) 80,51 Rev.A 2.9 MB November 4, 2015

  How will I know that I should use?

  Greetings,

  80.52 is the last and will include the previous update revisions.

  Download the update manually. Do not use the HPSA.

  See you soon!

• HP Pavilion 500-320no: updated BIOS for HP Pavilion 500-320no

  Hi HP!

  I have the same problem with the installation of update of the BIOS as other users.

  1. I have to use the update of the BIOS on an HP Pavilion 500 - 320no sp70148.exe? I tried five times through the support Wizard - but it does not work.

  2. and - important hov is this update? -rigth now I'm under FRIEND 80.16, 05/12/2014

  Kind regards

  Henry

  Hello, Anis, my advice to you would be to let your PC as it is until HP finds a solution for this. I don't want to try what I did if they feel uncomfortable or find confusing.

  You have any other problem with your HP computer, or you just want to update the BIOS?

  If your PC works well otherwise I think it would be much safer to wait.

  I know that computers can be frustrating, but if one little thing goes wrong, when updating any BIOS of computers it will be unusable.

  For someone else think to try what I did, I advise you to wait as I said above to ANIS.

  My pc works always fine, no problem * knock wood * , but my experience goes to work with BACK & before the BASIC programming in the 1980s. If the environment was not alien to me.

  I do not know HP will find a solution before too long.

  Shores.

• HP Pavilion 500-242ea: graphics card update

  I am an avid player of PC, when I try to play the new games IE cod blackopps 3 sound telling me that I have little memory, I think about buying additional ram, do I have to update my graphics card?

  System Pavilion 500-242ea

  mobo (jasmineR)

  chipset AMD A75 FCH

  MEM 4 x DDR3 Sockets

  a front side bus speed 4-way, 5 GT/s per lane

  processor socket FM2

  Exp 1 of slots pci express x 16 (ben2.0)

  3 PCI Express x 1 (gen 2.0)

  1 half-length mini-map

  Graphics

  235integrated Radeon R5

  AMD radeon 7560D 1440 x 900

  graphic mem 4 181 MB

  In the waiting

  You'll be glad you asked!

  This is your computer .  Power supply is 300W.  PROCESSOR AMD A8-5500.  D 7560 AMD graphics card.

  COD Black Ops must these requirements.   Your CPU meets the corrected value.

  The graphics are a serious difference... the comparison here is.  560ti vs the 760 and both are 170W.

  You will need at least a 500W PSU, but again, I would see that a 600W Corsair associated with a card EVGA.

  Finally, you need 8 GB of memory of motherboard.  Just 6 GB. Not sure about your Setup, because there are 4 locations, and you have 6 GB installed... Run the CPUID CPU-Z to analyze the 4 locations.

• HP PAVILION 500-141ea 8.1 update

  I have a 500-141ea PAVILION and its 2 weeks... my question is, someone has it improved to 8.1 with success? as microsoft is nagging me to do, if they have some advice before doing so, I ran microsoft update, I have the green light, a single shape Hp says its has not been tested and warns not to do so, can all a smooth confusion.

  Thank you

  Porl

  Your Support page has some drivers 8.1 update:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=5449722

• Pavilion 500-046: update BIOS on Pavilion 500

  Reviews of need for "HP consumer Desktoop PC BIOS Update (ROM family SSID ZAEO)." Downloaded the update, but when I tried to install, the screen went black for ten to fifteen minutes at that time, I panicked and shut down my computer. She started very well, but I am concerned about the update. Should I try again? Really should the screen be bleak for so long during the installation? It's VERY annoying. What can happen if I just don't install the update? My computer is a pavilion of 500, model 500-046.

  You are the very welcome.

  A doorstop, this is what your PC is only good for after it no longer works.

  I read a few posts from other members of the forum about the failure BIOS flashes after notification to support assistant.

  Maybe they are the same model as yours. They were recent messages last week.

  In any case, given that your PC works, I would leave it be.

  The fact that the update has been downloaded and is on your PC should be of no interest.

  It does not work by itself.  You have to find it in the folder of the file and double-click on and run the installer again.

  But if you get any more notifications of the wizard to support updates to the BIOS you can ignore them.

• Update of power supply for HP Pavilion 500-056

  I want to upgrade to a discrete graphics card, but the 300 watt PSU is not enough.  It is not one of the standard sizes such as ATX12V, EPS12V, SFX12V (small footprint), LFX12V (low profile form factor), or TFX12V (slim form factor).

  Does anyone know of a specific diet that can fit in my computer case?  Without my ability to be upgraded will be severely compromised.

  According to the specs of HP Pavilion 500-056 desktop PC product page, your computer uses a power SUPPLY ATX12V PSU which is 150 x 140 x 86 mm (5.9 x 5.5 x 3.4 inches) in size. Please consider replacing it with a Corsair CX500, CX600, CX500M, or CX600M depending on your graphics card needs.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• 500-210qe Pavilion: Pavilion 500-210qe: cpu fan not detected after update BIOS

  Pavilion 500-210qe started showing ' 511: cpu fan not detected; F1 = boot' message.  I checked the BIOS rev level and set to upgrade to the latest (80.13 FRIEND) but the problem persists.

  At startup, the cpu fan is not running, but after pressing F1.  Please notify.

  From the least expensive option, replace the cpu fan (which comes with the heat sink) has solved the problem.

• Pavilion 500-339: update video card for a 500-339 Pavilion

  I have a HP Pavilion 500-339. AMD A10, processor 3.5 GHz quad-core with 8 GB of RAM, running windows 8.1, 64-bit. It came with a Radeon R7 240 video card. I know that physical space is limited inside the computer case, but what could I upgrade to that would fit? While not the biggest PC-gamer out there, I do not play a bit and I would like the best features. Thank you!

  Hello

  Without replacing the power supply, the NVIDIA GTX 750 TI would be an excellent choice. Choose a model that does not require a 6-pin auxiliary power connector.  Open your Pc and do some measures so that you know for sure that the GTX model 750 will be fit. Most should adapt to certain expectations.  Know what the return policy is before you buy.

  Thanks for posting on the forum.

• Pavilion 500-339: update video card for a 500-339 Pavilion... room with Ram?

  I posted a message here a few days ago because I wanted to find a possible upgrade for my graphics card. I have a Pavilion 500-339, 3.5 GHz with 8g of RAM. The video card is a Radeo R7 240 and I want to upgrade. Big_Dave said (thanks for that!) but I am facing another problem. The motherboard is good, but compact and I fear that new video card (because it is longer) pretty much sitting on top the RAM (if it fits in all). I know that my computer is not a "PC game", but would that be a problem? One more time card would still hold? What choices do I have? Thank you

  Hello

  Aries won't present a problem of heat for the graphics card.

  Thanks for posting on the forum.

• Pavilion c 500-277: HP consumer Desktop PC BIOS Update (SSID family ROM 2AF7 fails to install.

  Repeated attempts to install the following update of HP fails.
  Update BIOS of HP desktop PC (SSID family ROM 2AF7) consumer
  There is no reason given and no event to see log.  I find myself in the dark
  with no possible resolution.

  There is a reported issue.  Some say that their problem is resolved, but I don't see any solution that fits in my system.

  My Version of the BIOS/Date's FRIEND 80.12 15/01/2014

  My computer:
  Product name: 500-277c serial number: [Moderator published serial number]
  Product number: F3E50AA #ABA 8.1 64-bit Windows

  The mystery continues.

  I followed the installation steps HP Support Assistant, making sure not to touch anything until the system has restarted safely.  (I confess that I tried to get the Windows Run dialog box to close by pressing 'ENTER' when I ran the process, the first time.)  Initially, it looked promising, but after a few moments, the alert returns.

  If you have more information about this conundrum, please let me know.

  P.S. Thanks for mounting on my serial number.  I naively does not consider it as personal information.

• HP Pavilion 500 series: I get a message saying that you have pending updates for Hp Support Assistant over and over again

  HI a little while back I upgraded to anniversary Windows 10 update things went well for me I keep hp Support Assistant on my desktop in the process of updating Windows 10 anniversary.  Finally, I decided one day to check hp Support Assistant to ensure that I had the lastestet version.  I went into Hp Support Assistant and clicked on about and clicked on the button for the latest version control, then a window is come in saying I had pending updates for Hp Support Assistant I would like to apply or not.  I pushed on the Yes button.  After the download and install updates and hp support Assistant stops and tempary files are deled then hp support Assistant will restart and return to the start page.  Everything seems to work fine download with green and white checkmarks circles with the categories above.

  I guesss I am asking for help it is because for days and days now when I go to HP support Assistant and click search the latest version that I get this message, you have pending updates for the support of hp Assistant you would like to apply or not.  I would now like to how pending updates will I have to ask a support Assistant hp until I don't see updates are available for the support of hp Assistant.

  Here is some information that might be helpful below:

  HP Supportt Assistant program file version: 16.101.7752

  How can I ensure that I have the latest version of the Support Wizard on my desktop computer.

  HP Support Assistant: 8.3.34.7

  Patch: 8.3.34.7

  Framework: 12.5.32.37

  Configuration files: 8.0.6294.2155

  Let me now is how easyier I could apply all updates waiting for the support of hp Assistant for Windows 10 home Edition 64-bit operating system.

  Thanks for your time and your help.

  @funny35,

  I'm glad that I could be useful,

  To help others looking for the same solution, please click on the tab "accepted solution".
  
  I thank you for your time and have a nice day!
  
  Kind regards

• Pavilion 500-368na: update the BIOS, do not install via HP Support Assistant.

  I tried four times to install a BIOS update (SSID Roma family 2AF7;) Version 80.20Ap1) provided in the Support Wizard, the update only installs on every opportunity. I get no error message. Restart the computer, but the version remains (FRIEND 80,19 (2014-07-18)) previous BIOS installed.

  I tried to stop my antivirus program, but that did not help. I noticed that hangs the command screen with a blinking cursor, but no statement is visible, and then my computer restarts.

  Is it possible that the update is corrupted? Any advice on how I should proceed would be welcome.

  Yes, HP has indeed pulled the update.  Human system is in danger and you can continue to use your computer.  Everyone here is always on my list of contacts as events change.